aboutsummaryrefslogtreecommitdiffstats
path: root/doc/ssl
diff options
context:
space:
mode:
Diffstat (limited to 'doc/ssl')
-rw-r--r--doc/ssl/SSL_CONF_cmd.pod33
-rw-r--r--doc/ssl/SSL_CTX_new.pod168
-rw-r--r--doc/ssl/SSL_CTX_set_options.pod10
-rw-r--r--doc/ssl/ssl.pod77
4 files changed, 205 insertions, 83 deletions
diff --git a/doc/ssl/SSL_CONF_cmd.pod b/doc/ssl/SSL_CONF_cmd.pod
index 2bf1a60e9013..e81d76ae779a 100644
--- a/doc/ssl/SSL_CONF_cmd.pod
+++ b/doc/ssl/SSL_CONF_cmd.pod
@@ -74,7 +74,7 @@ B<prime256v1>). Curve names are case sensitive.
=item B<-named_curve>
-This sets the temporary curve used for ephemeral ECDH modes. Only used by
+This sets the temporary curve used for ephemeral ECDH modes. Only used by
servers
The B<value> argument is a curve name or the special value B<auto> which
@@ -85,7 +85,7 @@ can be either the B<NIST> name (e.g. B<P-256>) or an OpenSSL OID name
=item B<-cipher>
Sets the cipher suite list to B<value>. Note: syntax checking of B<value> is
-currently not performed unless a B<SSL> or B<SSL_CTX> structure is
+currently not performed unless a B<SSL> or B<SSL_CTX> structure is
associated with B<cctx>.
=item B<-cert>
@@ -111,9 +111,9 @@ operations are permitted.
=item B<-no_ssl2>, B<-no_ssl3>, B<-no_tls1>, B<-no_tls1_1>, B<-no_tls1_2>
-Disables protocol support for SSLv2, SSLv3, TLS 1.0, TLS 1.1 or TLS 1.2
-by setting the corresponding options B<SSL_OP_NO_SSL2>, B<SSL_OP_NO_SSL3>,
-B<SSL_OP_NO_TLS1>, B<SSL_OP_NO_TLS1_1> and B<SSL_OP_NO_TLS1_2> respectively.
+Disables protocol support for SSLv2, SSLv3, TLSv1.0, TLSv1.1 or TLSv1.2
+by setting the corresponding options B<SSL_OP_NO_SSLv2>, B<SSL_OP_NO_SSLv3>,
+B<SSL_OP_NO_TLSv1>, B<SSL_OP_NO_TLSv1_1> and B<SSL_OP_NO_TLSv1_2> respectively.
=item B<-bugs>
@@ -177,7 +177,7 @@ Note: the command prefix (if set) alters the recognised B<cmd> values.
=item B<CipherString>
Sets the cipher suite list to B<value>. Note: syntax checking of B<value> is
-currently not performed unless an B<SSL> or B<SSL_CTX> structure is
+currently not performed unless an B<SSL> or B<SSL_CTX> structure is
associated with B<cctx>.
=item B<Certificate>
@@ -244,7 +244,7 @@ B<prime256v1>). Curve names are case sensitive.
=item B<ECDHParameters>
-This sets the temporary curve used for ephemeral ECDH modes. Only used by
+This sets the temporary curve used for ephemeral ECDH modes. Only used by
servers
The B<value> argument is a curve name or the special value B<Automatic> which
@@ -258,10 +258,11 @@ The supported versions of the SSL or TLS protocol.
The B<value> argument is a comma separated list of supported protocols to
enable or disable. If an protocol is preceded by B<-> that version is disabled.
-All versions are enabled by default, though applications may choose to
-explicitly disable some. Currently supported protocol values are B<SSLv2>,
-B<SSLv3>, B<TLSv1>, B<TLSv1.1> and B<TLSv1.2>. The special value B<ALL> refers
-to all supported versions.
+Currently supported protocol values are B<SSLv2>, B<SSLv3>, B<TLSv1>,
+B<TLSv1.1> and B<TLSv1.2>.
+All protocol versions other than B<SSLv2> are enabled by default.
+To avoid inadvertent enabling of B<SSLv2>, when SSLv2 is disabled, it is not
+possible to enable it via the B<Protocol> command.
=item B<Options>
@@ -339,16 +340,16 @@ The value is a directory name.
The order of operations is significant. This can be used to set either defaults
or values which cannot be overridden. For example if an application calls:
- SSL_CONF_cmd(ctx, "Protocol", "-SSLv2");
+ SSL_CONF_cmd(ctx, "Protocol", "-SSLv3");
SSL_CONF_cmd(ctx, userparam, uservalue);
-it will disable SSLv2 support by default but the user can override it. If
+it will disable SSLv3 support by default but the user can override it. If
however the call sequence is:
SSL_CONF_cmd(ctx, userparam, uservalue);
- SSL_CONF_cmd(ctx, "Protocol", "-SSLv2");
+ SSL_CONF_cmd(ctx, "Protocol", "-SSLv3");
-SSLv2 is B<always> disabled and attempt to override this by the user are
+then SSLv3 is B<always> disabled and attempt to override this by the user are
ignored.
By checking the return code of SSL_CTX_cmd() it is possible to query if a
@@ -372,7 +373,7 @@ can be checked instead. If -3 is returned a required argument is missing
and an error is indicated. If 0 is returned some other error occurred and
this can be reported back to the user.
-The function SSL_CONF_cmd_value_type() can be used by applications to
+The function SSL_CONF_cmd_value_type() can be used by applications to
check for the existence of a command or to perform additional syntax
checking or translation of the command value. For example if the return
value is B<SSL_CONF_TYPE_FILE> an application could translate a relative
diff --git a/doc/ssl/SSL_CTX_new.pod b/doc/ssl/SSL_CTX_new.pod
index 491ac8c172cb..b8cc87978451 100644
--- a/doc/ssl/SSL_CTX_new.pod
+++ b/doc/ssl/SSL_CTX_new.pod
@@ -2,13 +2,55 @@
=head1 NAME
-SSL_CTX_new - create a new SSL_CTX object as framework for TLS/SSL enabled functions
+SSL_CTX_new,
+SSLv23_method, SSLv23_server_method, SSLv23_client_method,
+TLSv1_2_method, TLSv1_2_server_method, TLSv1_2_client_method,
+TLSv1_1_method, TLSv1_1_server_method, TLSv1_1_client_method,
+TLSv1_method, TLSv1_server_method, TLSv1_client_method,
+SSLv3_method, SSLv3_server_method, SSLv3_client_method,
+SSLv2_method, SSLv2_server_method, SSLv2_client_method,
+DTLS_method, DTLS_server_method, DTLS_client_method,
+DTLSv1_2_method, DTLSv1_2_server_method, DTLSv1_2_client_method,
+DTLSv1_method, DTLSv1_server_method, DTLSv1_client_method -
+create a new SSL_CTX object as framework for TLS/SSL enabled functions
=head1 SYNOPSIS
#include <openssl/ssl.h>
SSL_CTX *SSL_CTX_new(const SSL_METHOD *method);
+ const SSL_METHOD *SSLv23_method(void);
+ const SSL_METHOD *SSLv23_server_method(void);
+ const SSL_METHOD *SSLv23_client_method(void);
+ const SSL_METHOD *TLSv1_2_method(void);
+ const SSL_METHOD *TLSv1_2_server_method(void);
+ const SSL_METHOD *TLSv1_2_client_method(void);
+ const SSL_METHOD *TLSv1_1_method(void);
+ const SSL_METHOD *TLSv1_1_server_method(void);
+ const SSL_METHOD *TLSv1_1_client_method(void);
+ const SSL_METHOD *TLSv1_method(void);
+ const SSL_METHOD *TLSv1_server_method(void);
+ const SSL_METHOD *TLSv1_client_method(void);
+ #ifndef OPENSSL_NO_SSL3_METHOD
+ const SSL_METHOD *SSLv3_method(void);
+ const SSL_METHOD *SSLv3_server_method(void);
+ const SSL_METHOD *SSLv3_client_method(void);
+ #endif
+ #ifndef OPENSSL_NO_SSL2
+ const SSL_METHOD *SSLv2_method(void);
+ const SSL_METHOD *SSLv2_server_method(void);
+ const SSL_METHOD *SSLv2_client_method(void);
+ #endif
+
+ const SSL_METHOD *DTLS_method(void);
+ const SSL_METHOD *DTLS_server_method(void);
+ const SSL_METHOD *DTLS_client_method(void);
+ const SSL_METHOD *DTLSv1_2_method(void);
+ const SSL_METHOD *DTLSv1_2_server_method(void);
+ const SSL_METHOD *DTLSv1_2_client_method(void);
+ const SSL_METHOD *DTLSv1_method(void);
+ const SSL_METHOD *DTLSv1_server_method(void);
+ const SSL_METHOD *DTLSv1_client_method(void);
=head1 DESCRIPTION
@@ -23,65 +65,88 @@ client only type. B<method> can be of the following types:
=over 4
-=item SSLv2_method(void), SSLv2_server_method(void), SSLv2_client_method(void)
+=item SSLv23_method(), SSLv23_server_method(), SSLv23_client_method()
+
+These are the general-purpose I<version-flexible> SSL/TLS methods.
+The actual protocol version used will be negotiated to the highest version
+mutually supported by the client and the server.
+The supported protocols are SSLv2, SSLv3, TLSv1, TLSv1.1 and TLSv1.2.
+Most applications should use these method, and avoid the version specific
+methods described below.
+
+The list of protocols available can be further limited using the
+B<SSL_OP_NO_SSLv2>, B<SSL_OP_NO_SSLv3>, B<SSL_OP_NO_TLSv1>,
+B<SSL_OP_NO_TLSv1_1> and B<SSL_OP_NO_TLSv1_2> options of the
+L<SSL_CTX_set_options(3)> or L<SSL_set_options(3)> functions.
+Clients should avoid creating "holes" in the set of protocols they support,
+when disabling a protocol, make sure that you also disable either all previous
+or all subsequent protocol versions.
+In clients, when a protocol version is disabled without disabling I<all>
+previous protocol versions, the effect is to also disable all subsequent
+protocol versions.
+
+The SSLv2 and SSLv3 protocols are deprecated and should generally not be used.
+Applications should typically use L<SSL_CTX_set_options(3)> in combination with
+the B<SSL_OP_NO_SSLv3> flag to disable negotiation of SSLv3 via the above
+I<version-flexible> SSL/TLS methods.
+The B<SSL_OP_NO_SSLv2> option is set by default, and would need to be cleared
+via L<SSL_CTX_clear_options(3)> in order to enable negotiation of SSLv2.
+
+=item TLSv1_2_method(), TLSv1_2_server_method(), TLSv1_2_client_method()
-A TLS/SSL connection established with these methods will only understand
-the SSLv2 protocol. A client will send out SSLv2 client hello messages
-and will also indicate that it only understand SSLv2. A server will only
-understand SSLv2 client hello messages.
+A TLS/SSL connection established with these methods will only understand the
+TLSv1.2 protocol. A client will send out TLSv1.2 client hello messages and
+will also indicate that it only understand TLSv1.2. A server will only
+understand TLSv1.2 client hello messages.
-=item SSLv3_method(void), SSLv3_server_method(void), SSLv3_client_method(void)
+=item TLSv1_1_method(), TLSv1_1_server_method(), TLSv1_1_client_method()
A TLS/SSL connection established with these methods will only understand the
-SSLv3 protocol. A client will send out SSLv3 client hello messages
-and will indicate that it only understands SSLv3. A server will only understand
-SSLv3 client hello messages. This especially means, that it will
-not understand SSLv2 client hello messages which are widely used for
-compatibility reasons, see SSLv23_*_method().
+TLSv1.1 protocol. A client will send out TLSv1.1 client hello messages and
+will also indicate that it only understand TLSv1.1. A server will only
+understand TLSv1.1 client hello messages.
-=item TLSv1_method(void), TLSv1_server_method(void), TLSv1_client_method(void)
+=item TLSv1_method(), TLSv1_server_method(), TLSv1_client_method()
A TLS/SSL connection established with these methods will only understand the
-TLSv1 protocol. A client will send out TLSv1 client hello messages
-and will indicate that it only understands TLSv1. A server will only understand
-TLSv1 client hello messages. This especially means, that it will
-not understand SSLv2 client hello messages which are widely used for
-compatibility reasons, see SSLv23_*_method(). It will also not understand
-SSLv3 client hello messages.
-
-=item SSLv23_method(void), SSLv23_server_method(void), SSLv23_client_method(void)
-
-A TLS/SSL connection established with these methods may understand the SSLv2,
-SSLv3, TLSv1, TLSv1.1 and TLSv1.2 protocols.
-
-If the cipher list does not contain any SSLv2 ciphersuites (the default
-cipher list does not) or extensions are required (for example server name)
-a client will send out TLSv1 client hello messages including extensions and
-will indicate that it also understands TLSv1.1, TLSv1.2 and permits a
-fallback to SSLv3. A server will support SSLv3, TLSv1, TLSv1.1 and TLSv1.2
-protocols. This is the best choice when compatibility is a concern.
-
-If any SSLv2 ciphersuites are included in the cipher list and no extensions
-are required then SSLv2 compatible client hellos will be used by clients and
-SSLv2 will be accepted by servers. This is B<not> recommended due to the
-insecurity of SSLv2 and the limited nature of the SSLv2 client hello
-prohibiting the use of extensions.
+TLSv1 protocol. A client will send out TLSv1 client hello messages and will
+indicate that it only understands TLSv1. A server will only understand TLSv1
+client hello messages.
-=back
+=item SSLv3_method(), SSLv3_server_method(), SSLv3_client_method()
+
+A TLS/SSL connection established with these methods will only understand the
+SSLv3 protocol. A client will send out SSLv3 client hello messages and will
+indicate that it only understands SSLv3. A server will only understand SSLv3
+client hello messages. The SSLv3 protocol is deprecated and should not be
+used.
+
+=item SSLv2_method(), SSLv2_server_method(), SSLv2_client_method()
+
+A TLS/SSL connection established with these methods will only understand the
+SSLv2 protocol. A client will send out SSLv2 client hello messages and will
+also indicate that it only understand SSLv2. A server will only understand
+SSLv2 client hello messages. The SSLv2 protocol offers little to no security
+and should not be used.
+As of OpenSSL 1.0.2g, EXPORT ciphers and 56-bit DES are no longer available
+with SSLv2.
-The list of protocols available can later be limited using the SSL_OP_NO_SSLv2,
-SSL_OP_NO_SSLv3, SSL_OP_NO_TLSv1, SSL_OP_NO_TLSv1_1 and SSL_OP_NO_TLSv1_2
-options of the SSL_CTX_set_options() or SSL_set_options() functions.
-Using these options it is possible to choose e.g. SSLv23_server_method() and
-be able to negotiate with all possible clients, but to only allow newer
-protocols like TLSv1, TLSv1.1 or TLS v1.2.
+=item DTLS_method(), DTLS_server_method(), DTLS_client_method()
-Applications which never want to support SSLv2 (even is the cipher string
-is configured to use SSLv2 ciphersuites) can set SSL_OP_NO_SSLv2.
+These are the version-flexible DTLS methods.
+
+=item DTLSv1_2_method(), DTLSv1_2_server_method(), DTLSv1_2_client_method()
+
+These are the version-specific methods for DTLSv1.2.
+
+=item DTLSv1_method(), DTLSv1_server_method(), DTLSv1_client_method()
+
+These are the version-specific methods for DTLSv1.
+
+=back
-SSL_CTX_new() initializes the list of ciphers, the session cache setting,
-the callbacks, the keys and certificates and the options to its default
-values.
+SSL_CTX_new() initializes the list of ciphers, the session cache setting, the
+callbacks, the keys and certificates and the options to its default values.
=head1 RETURN VALUES
@@ -91,8 +156,8 @@ The following return values can occur:
=item NULL
-The creation of a new SSL_CTX object failed. Check the error stack to
-find out the reason.
+The creation of a new SSL_CTX object failed. Check the error stack to find out
+the reason.
=item Pointer to an SSL_CTX object
@@ -102,6 +167,7 @@ The return value points to an allocated SSL_CTX object.
=head1 SEE ALSO
+L<SSL_CTX_set_options(3)>, L<SSL_CTX_clear_options(3)>, L<SSL_set_options(3)>,
L<SSL_CTX_free(3)|SSL_CTX_free(3)>, L<SSL_accept(3)|SSL_accept(3)>,
L<ssl(3)|ssl(3)>, L<SSL_set_connect_state(3)|SSL_set_connect_state(3)>
diff --git a/doc/ssl/SSL_CTX_set_options.pod b/doc/ssl/SSL_CTX_set_options.pod
index e80a72cd4d06..9a7e98c1d414 100644
--- a/doc/ssl/SSL_CTX_set_options.pod
+++ b/doc/ssl/SSL_CTX_set_options.pod
@@ -189,15 +189,25 @@ browser has a cert, it will crash/hang. Works for 3.x and 4.xbeta
=item SSL_OP_NO_SSLv2
Do not use the SSLv2 protocol.
+As of OpenSSL 1.0.2g the B<SSL_OP_NO_SSLv2> option is set by default.
=item SSL_OP_NO_SSLv3
Do not use the SSLv3 protocol.
+It is recommended that applications should set this option.
=item SSL_OP_NO_TLSv1
Do not use the TLSv1 protocol.
+=item SSL_OP_NO_TLSv1_1
+
+Do not use the TLSv1.1 protocol.
+
+=item SSL_OP_NO_TLSv1_2
+
+Do not use the TLSv1.2 protocol.
+
=item SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION
When performing renegotiation as a server, always start a new session
diff --git a/doc/ssl/ssl.pod b/doc/ssl/ssl.pod
index 242087e691e3..70cca178a204 100644
--- a/doc/ssl/ssl.pod
+++ b/doc/ssl/ssl.pod
@@ -130,41 +130,86 @@ protocol methods defined in B<SSL_METHOD> structures.
=over 4
-=item const SSL_METHOD *B<SSLv2_client_method>(void);
+=item const SSL_METHOD *B<SSLv23_method>(void);
-Constructor for the SSLv2 SSL_METHOD structure for a dedicated client.
+Constructor for the I<version-flexible> SSL_METHOD structure for
+clients, servers or both.
+See L<SSL_CTX_new(3)> for details.
-=item const SSL_METHOD *B<SSLv2_server_method>(void);
+=item const SSL_METHOD *B<SSLv23_client_method>(void);
-Constructor for the SSLv2 SSL_METHOD structure for a dedicated server.
+Constructor for the I<version-flexible> SSL_METHOD structure for
+clients.
-=item const SSL_METHOD *B<SSLv2_method>(void);
+=item const SSL_METHOD *B<SSLv23_client_method>(void);
-Constructor for the SSLv2 SSL_METHOD structure for combined client and server.
+Constructor for the I<version-flexible> SSL_METHOD structure for
+servers.
-=item const SSL_METHOD *B<SSLv3_client_method>(void);
+=item const SSL_METHOD *B<TLSv1_2_method>(void);
-Constructor for the SSLv3 SSL_METHOD structure for a dedicated client.
+Constructor for the TLSv1.2 SSL_METHOD structure for clients, servers
+or both.
-=item const SSL_METHOD *B<SSLv3_server_method>(void);
+=item const SSL_METHOD *B<TLSv1_2_client_method>(void);
-Constructor for the SSLv3 SSL_METHOD structure for a dedicated server.
+Constructor for the TLSv1.2 SSL_METHOD structure for clients.
-=item const SSL_METHOD *B<SSLv3_method>(void);
+=item const SSL_METHOD *B<TLSv1_2_server_method>(void);
+
+Constructor for the TLSv1.2 SSL_METHOD structure for servers.
+
+=item const SSL_METHOD *B<TLSv1_1_method>(void);
-Constructor for the SSLv3 SSL_METHOD structure for combined client and server.
+Constructor for the TLSv1.1 SSL_METHOD structure for clients, servers
+or both.
+
+=item const SSL_METHOD *B<TLSv1_1_client_method>(void);
+
+Constructor for the TLSv1.1 SSL_METHOD structure for clients.
+
+=item const SSL_METHOD *B<TLSv1_1_server_method>(void);
+
+Constructor for the TLSv1.1 SSL_METHOD structure for servers.
+
+=item const SSL_METHOD *B<TLSv1_method>(void);
+
+Constructor for the TLSv1 SSL_METHOD structure for clients, servers
+or both.
=item const SSL_METHOD *B<TLSv1_client_method>(void);
-Constructor for the TLSv1 SSL_METHOD structure for a dedicated client.
+Constructor for the TLSv1 SSL_METHOD structure for clients.
=item const SSL_METHOD *B<TLSv1_server_method>(void);
-Constructor for the TLSv1 SSL_METHOD structure for a dedicated server.
+Constructor for the TLSv1 SSL_METHOD structure for servers.
-=item const SSL_METHOD *B<TLSv1_method>(void);
+=item const SSL_METHOD *B<SSLv3_method>(void);
+
+Constructor for the SSLv3 SSL_METHOD structure for clients, servers
+or both.
+
+=item const SSL_METHOD *B<SSLv3_client_method>(void);
+
+Constructor for the SSLv3 SSL_METHOD structure for clients.
+
+=item const SSL_METHOD *B<SSLv3_server_method>(void);
+
+Constructor for the SSLv3 SSL_METHOD structure for servers.
+
+=item const SSL_METHOD *B<SSLv2_method>(void);
+
+Constructor for the SSLv2 SSL_METHOD structure for clients, servers
+or both.
+
+=item const SSL_METHOD *B<SSLv2_client_method>(void);
+
+Constructor for the SSLv2 SSL_METHOD structure for clients.
+
+=item const SSL_METHOD *B<SSLv2_server_method>(void);
-Constructor for the TLSv1 SSL_METHOD structure for combined client and server.
+Constructor for the SSLv2 SSL_METHOD structure for servers.
=back