aboutsummaryrefslogtreecommitdiffstats
path: root/crypto/poly1305/asm/poly1305-ppc.pl
diff options
context:
space:
mode:
Diffstat (limited to 'crypto/poly1305/asm/poly1305-ppc.pl')
-rwxr-xr-xcrypto/poly1305/asm/poly1305-ppc.pl645
1 files changed, 645 insertions, 0 deletions
diff --git a/crypto/poly1305/asm/poly1305-ppc.pl b/crypto/poly1305/asm/poly1305-ppc.pl
new file mode 100755
index 000000000000..0c6d015d585b
--- /dev/null
+++ b/crypto/poly1305/asm/poly1305-ppc.pl
@@ -0,0 +1,645 @@
+#! /usr/bin/env perl
+# Copyright 2016-2018 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License"). You may not use
+# this file except in compliance with the License. You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+#
+# ====================================================================
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# This module implements Poly1305 hash for PowerPC.
+#
+# June 2015
+#
+# Numbers are cycles per processed byte with poly1305_blocks alone,
+# and improvement coefficients relative to gcc-generated code.
+#
+# -m32 -m64
+#
+# Freescale e300 14.8/+80% -
+# PPC74x0 7.60/+60% -
+# PPC970 7.00/+114% 3.51/+205%
+# POWER7 3.75/+260% 1.93/+100%
+# POWER8 - 2.03/+200%
+# POWER9 - 2.00/+150%
+#
+# Do we need floating-point implementation for PPC? Results presented
+# in poly1305_ieee754.c are tricky to compare to, because they are for
+# compiler-generated code. On the other hand it's known that floating-
+# point performance can be dominated by FPU latency, which means that
+# there is limit even for ideally optimized (and even vectorized) code.
+# And this limit is estimated to be higher than above -m64 results. Or
+# in other words floating-point implementation can be meaningful to
+# consider only in 32-bit application context. We probably have to
+# recognize that 32-bit builds are getting less popular on high-end
+# systems and therefore tend to target embedded ones, which might not
+# even have FPU...
+#
+# On side note, Power ISA 2.07 enables vector base 2^26 implementation,
+# and POWER8 might have capacity to break 1.0 cycle per byte barrier...
+
+$flavour = shift;
+
+if ($flavour =~ /64/) {
+ $SIZE_T =8;
+ $LRSAVE =2*$SIZE_T;
+ $UCMP ="cmpld";
+ $STU ="stdu";
+ $POP ="ld";
+ $PUSH ="std";
+} elsif ($flavour =~ /32/) {
+ $SIZE_T =4;
+ $LRSAVE =$SIZE_T;
+ $UCMP ="cmplw";
+ $STU ="stwu";
+ $POP ="lwz";
+ $PUSH ="stw";
+} else { die "nonsense $flavour"; }
+
+# Define endianness based on flavour
+# i.e.: linux64le
+$LITTLE_ENDIAN = ($flavour=~/le$/) ? $SIZE_T : 0;
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or
+( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
+die "can't locate ppc-xlate.pl";
+
+open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!";
+
+$FRAME=24*$SIZE_T;
+
+$sp="r1";
+my ($ctx,$inp,$len,$padbit) = map("r$_",(3..6));
+my ($mac,$nonce)=($inp,$len);
+my $mask = "r0";
+
+$code=<<___;
+.machine "any"
+.text
+___
+ if ($flavour =~ /64/) {
+###############################################################################
+# base 2^64 implementation
+
+my ($h0,$h1,$h2,$d0,$d1,$d2, $r0,$r1,$s1, $t0,$t1) = map("r$_",(7..12,27..31));
+
+$code.=<<___;
+.globl .poly1305_init_int
+.align 4
+.poly1305_init_int:
+ xor r0,r0,r0
+ std r0,0($ctx) # zero hash value
+ std r0,8($ctx)
+ std r0,16($ctx)
+
+ $UCMP $inp,r0
+ beq- Lno_key
+___
+$code.=<<___ if ($LITTLE_ENDIAN);
+ ld $d0,0($inp) # load key material
+ ld $d1,8($inp)
+___
+$code.=<<___ if (!$LITTLE_ENDIAN);
+ li $h0,4
+ lwbrx $d0,0,$inp # load key material
+ li $d1,8
+ lwbrx $h0,$h0,$inp
+ li $h1,12
+ lwbrx $d1,$d1,$inp
+ lwbrx $h1,$h1,$inp
+ insrdi $d0,$h0,32,0
+ insrdi $d1,$h1,32,0
+___
+$code.=<<___;
+ lis $h1,0xfff # 0x0fff0000
+ ori $h1,$h1,0xfffc # 0x0ffffffc
+ insrdi $h1,$h1,32,0 # 0x0ffffffc0ffffffc
+ ori $h0,$h1,3 # 0x0ffffffc0fffffff
+
+ and $d0,$d0,$h0
+ and $d1,$d1,$h1
+
+ std $d0,32($ctx) # store key
+ std $d1,40($ctx)
+
+Lno_key:
+ xor r3,r3,r3
+ blr
+ .long 0
+ .byte 0,12,0x14,0,0,0,2,0
+.size .poly1305_init_int,.-.poly1305_init_int
+
+.globl .poly1305_blocks
+.align 4
+.poly1305_blocks:
+ srdi. $len,$len,4
+ beq- Labort
+
+ $STU $sp,-$FRAME($sp)
+ mflr r0
+ $PUSH r27,`$FRAME-$SIZE_T*5`($sp)
+ $PUSH r28,`$FRAME-$SIZE_T*4`($sp)
+ $PUSH r29,`$FRAME-$SIZE_T*3`($sp)
+ $PUSH r30,`$FRAME-$SIZE_T*2`($sp)
+ $PUSH r31,`$FRAME-$SIZE_T*1`($sp)
+ $PUSH r0,`$FRAME+$LRSAVE`($sp)
+
+ ld $r0,32($ctx) # load key
+ ld $r1,40($ctx)
+
+ ld $h0,0($ctx) # load hash value
+ ld $h1,8($ctx)
+ ld $h2,16($ctx)
+
+ srdi $s1,$r1,2
+ mtctr $len
+ add $s1,$s1,$r1 # s1 = r1 + r1>>2
+ li $mask,3
+ b Loop
+
+.align 4
+Loop:
+___
+$code.=<<___ if ($LITTLE_ENDIAN);
+ ld $t0,0($inp) # load input
+ ld $t1,8($inp)
+___
+$code.=<<___ if (!$LITTLE_ENDIAN);
+ li $d0,4
+ lwbrx $t0,0,$inp # load input
+ li $t1,8
+ lwbrx $d0,$d0,$inp
+ li $d1,12
+ lwbrx $t1,$t1,$inp
+ lwbrx $d1,$d1,$inp
+ insrdi $t0,$d0,32,0
+ insrdi $t1,$d1,32,0
+___
+$code.=<<___;
+ addi $inp,$inp,16
+
+ addc $h0,$h0,$t0 # accumulate input
+ adde $h1,$h1,$t1
+
+ mulld $d0,$h0,$r0 # h0*r0
+ mulhdu $d1,$h0,$r0
+ adde $h2,$h2,$padbit
+
+ mulld $t0,$h1,$s1 # h1*5*r1
+ mulhdu $t1,$h1,$s1
+ addc $d0,$d0,$t0
+ adde $d1,$d1,$t1
+
+ mulld $t0,$h0,$r1 # h0*r1
+ mulhdu $d2,$h0,$r1
+ addc $d1,$d1,$t0
+ addze $d2,$d2
+
+ mulld $t0,$h1,$r0 # h1*r0
+ mulhdu $t1,$h1,$r0
+ addc $d1,$d1,$t0
+ adde $d2,$d2,$t1
+
+ mulld $t0,$h2,$s1 # h2*5*r1
+ mulld $t1,$h2,$r0 # h2*r0
+ addc $d1,$d1,$t0
+ adde $d2,$d2,$t1
+
+ andc $t0,$d2,$mask # final reduction step
+ and $h2,$d2,$mask
+ srdi $t1,$t0,2
+ add $t0,$t0,$t1
+ addc $h0,$d0,$t0
+ addze $h1,$d1
+ addze $h2,$h2
+
+ bdnz Loop
+
+ std $h0,0($ctx) # store hash value
+ std $h1,8($ctx)
+ std $h2,16($ctx)
+
+ $POP r27,`$FRAME-$SIZE_T*5`($sp)
+ $POP r28,`$FRAME-$SIZE_T*4`($sp)
+ $POP r29,`$FRAME-$SIZE_T*3`($sp)
+ $POP r30,`$FRAME-$SIZE_T*2`($sp)
+ $POP r31,`$FRAME-$SIZE_T*1`($sp)
+ addi $sp,$sp,$FRAME
+Labort:
+ blr
+ .long 0
+ .byte 0,12,4,1,0x80,5,4,0
+.size .poly1305_blocks,.-.poly1305_blocks
+
+.globl .poly1305_emit
+.align 4
+.poly1305_emit:
+ ld $h0,0($ctx) # load hash
+ ld $h1,8($ctx)
+ ld $h2,16($ctx)
+ ld $padbit,0($nonce) # load nonce
+ ld $nonce,8($nonce)
+
+ addic $d0,$h0,5 # compare to modulus
+ addze $d1,$h1
+ addze $d2,$h2
+
+ srdi $mask,$d2,2 # did it carry/borrow?
+ neg $mask,$mask
+
+ andc $h0,$h0,$mask
+ and $d0,$d0,$mask
+ andc $h1,$h1,$mask
+ and $d1,$d1,$mask
+ or $h0,$h0,$d0
+ or $h1,$h1,$d1
+___
+$code.=<<___ if (!$LITTLE_ENDIAN);
+ rotldi $padbit,$padbit,32 # flip nonce words
+ rotldi $nonce,$nonce,32
+___
+$code.=<<___;
+ addc $h0,$h0,$padbit # accumulate nonce
+ adde $h1,$h1,$nonce
+___
+$code.=<<___ if ($LITTLE_ENDIAN);
+ std $h0,0($mac) # write result
+ std $h1,8($mac)
+___
+$code.=<<___ if (!$LITTLE_ENDIAN);
+ extrdi r0,$h0,32,0
+ li $d0,4
+ stwbrx $h0,0,$mac # write result
+ extrdi $h0,$h1,32,0
+ li $d1,8
+ stwbrx r0,$d0,$mac
+ li $d2,12
+ stwbrx $h1,$d1,$mac
+ stwbrx $h0,$d2,$mac
+___
+$code.=<<___;
+ blr
+ .long 0
+ .byte 0,12,0x14,0,0,0,3,0
+.size .poly1305_emit,.-.poly1305_emit
+___
+ } else {
+###############################################################################
+# base 2^32 implementation
+
+my ($h0,$h1,$h2,$h3,$h4, $r0,$r1,$r2,$r3, $s1,$s2,$s3,
+ $t0,$t1,$t2,$t3, $D0,$D1,$D2,$D3, $d0,$d1,$d2,$d3
+ ) = map("r$_",(7..12,14..31));
+
+$code.=<<___;
+.globl .poly1305_init_int
+.align 4
+.poly1305_init_int:
+ xor r0,r0,r0
+ stw r0,0($ctx) # zero hash value
+ stw r0,4($ctx)
+ stw r0,8($ctx)
+ stw r0,12($ctx)
+ stw r0,16($ctx)
+
+ $UCMP $inp,r0
+ beq- Lno_key
+___
+$code.=<<___ if ($LITTLE_ENDIAN);
+ lw $h0,0($inp) # load key material
+ lw $h1,4($inp)
+ lw $h2,8($inp)
+ lw $h3,12($inp)
+___
+$code.=<<___ if (!$LITTLE_ENDIAN);
+ li $h1,4
+ lwbrx $h0,0,$inp # load key material
+ li $h2,8
+ lwbrx $h1,$h1,$inp
+ li $h3,12
+ lwbrx $h2,$h2,$inp
+ lwbrx $h3,$h3,$inp
+___
+$code.=<<___;
+ lis $mask,0xf000 # 0xf0000000
+ li $r0,-4
+ andc $r0,$r0,$mask # 0x0ffffffc
+
+ andc $h0,$h0,$mask
+ and $h1,$h1,$r0
+ and $h2,$h2,$r0
+ and $h3,$h3,$r0
+
+ stw $h0,32($ctx) # store key
+ stw $h1,36($ctx)
+ stw $h2,40($ctx)
+ stw $h3,44($ctx)
+
+Lno_key:
+ xor r3,r3,r3
+ blr
+ .long 0
+ .byte 0,12,0x14,0,0,0,2,0
+.size .poly1305_init_int,.-.poly1305_init_int
+
+.globl .poly1305_blocks
+.align 4
+.poly1305_blocks:
+ srwi. $len,$len,4
+ beq- Labort
+
+ $STU $sp,-$FRAME($sp)
+ mflr r0
+ $PUSH r14,`$FRAME-$SIZE_T*18`($sp)
+ $PUSH r15,`$FRAME-$SIZE_T*17`($sp)
+ $PUSH r16,`$FRAME-$SIZE_T*16`($sp)
+ $PUSH r17,`$FRAME-$SIZE_T*15`($sp)
+ $PUSH r18,`$FRAME-$SIZE_T*14`($sp)
+ $PUSH r19,`$FRAME-$SIZE_T*13`($sp)
+ $PUSH r20,`$FRAME-$SIZE_T*12`($sp)
+ $PUSH r21,`$FRAME-$SIZE_T*11`($sp)
+ $PUSH r22,`$FRAME-$SIZE_T*10`($sp)
+ $PUSH r23,`$FRAME-$SIZE_T*9`($sp)
+ $PUSH r24,`$FRAME-$SIZE_T*8`($sp)
+ $PUSH r25,`$FRAME-$SIZE_T*7`($sp)
+ $PUSH r26,`$FRAME-$SIZE_T*6`($sp)
+ $PUSH r27,`$FRAME-$SIZE_T*5`($sp)
+ $PUSH r28,`$FRAME-$SIZE_T*4`($sp)
+ $PUSH r29,`$FRAME-$SIZE_T*3`($sp)
+ $PUSH r30,`$FRAME-$SIZE_T*2`($sp)
+ $PUSH r31,`$FRAME-$SIZE_T*1`($sp)
+ $PUSH r0,`$FRAME+$LRSAVE`($sp)
+
+ lwz $r0,32($ctx) # load key
+ lwz $r1,36($ctx)
+ lwz $r2,40($ctx)
+ lwz $r3,44($ctx)
+
+ lwz $h0,0($ctx) # load hash value
+ lwz $h1,4($ctx)
+ lwz $h2,8($ctx)
+ lwz $h3,12($ctx)
+ lwz $h4,16($ctx)
+
+ srwi $s1,$r1,2
+ srwi $s2,$r2,2
+ srwi $s3,$r3,2
+ add $s1,$s1,$r1 # si = ri + ri>>2
+ add $s2,$s2,$r2
+ add $s3,$s3,$r3
+ mtctr $len
+ li $mask,3
+ b Loop
+
+.align 4
+Loop:
+___
+$code.=<<___ if ($LITTLE_ENDIAN);
+ lwz $d0,0($inp) # load input
+ lwz $d1,4($inp)
+ lwz $d2,8($inp)
+ lwz $d3,12($inp)
+___
+$code.=<<___ if (!$LITTLE_ENDIAN);
+ li $d1,4
+ lwbrx $d0,0,$inp # load input
+ li $d2,8
+ lwbrx $d1,$d1,$inp
+ li $d3,12
+ lwbrx $d2,$d2,$inp
+ lwbrx $d3,$d3,$inp
+___
+$code.=<<___;
+ addi $inp,$inp,16
+
+ addc $h0,$h0,$d0 # accumulate input
+ adde $h1,$h1,$d1
+ adde $h2,$h2,$d2
+
+ mullw $d0,$h0,$r0 # h0*r0
+ mulhwu $D0,$h0,$r0
+
+ mullw $d1,$h0,$r1 # h0*r1
+ mulhwu $D1,$h0,$r1
+
+ mullw $d2,$h0,$r2 # h0*r2
+ mulhwu $D2,$h0,$r2
+
+ adde $h3,$h3,$d3
+ adde $h4,$h4,$padbit
+
+ mullw $d3,$h0,$r3 # h0*r3
+ mulhwu $D3,$h0,$r3
+
+ mullw $t0,$h1,$s3 # h1*s3
+ mulhwu $t1,$h1,$s3
+
+ mullw $t2,$h1,$r0 # h1*r0
+ mulhwu $t3,$h1,$r0
+ addc $d0,$d0,$t0
+ adde $D0,$D0,$t1
+
+ mullw $t0,$h1,$r1 # h1*r1
+ mulhwu $t1,$h1,$r1
+ addc $d1,$d1,$t2
+ adde $D1,$D1,$t3
+
+ mullw $t2,$h1,$r2 # h1*r2
+ mulhwu $t3,$h1,$r2
+ addc $d2,$d2,$t0
+ adde $D2,$D2,$t1
+
+ mullw $t0,$h2,$s2 # h2*s2
+ mulhwu $t1,$h2,$s2
+ addc $d3,$d3,$t2
+ adde $D3,$D3,$t3
+
+ mullw $t2,$h2,$s3 # h2*s3
+ mulhwu $t3,$h2,$s3
+ addc $d0,$d0,$t0
+ adde $D0,$D0,$t1
+
+ mullw $t0,$h2,$r0 # h2*r0
+ mulhwu $t1,$h2,$r0
+ addc $d1,$d1,$t2
+ adde $D1,$D1,$t3
+
+ mullw $t2,$h2,$r1 # h2*r1
+ mulhwu $t3,$h2,$r1
+ addc $d2,$d2,$t0
+ adde $D2,$D2,$t1
+
+ mullw $t0,$h3,$s1 # h3*s1
+ mulhwu $t1,$h3,$s1
+ addc $d3,$d3,$t2
+ adde $D3,$D3,$t3
+
+ mullw $t2,$h3,$s2 # h3*s2
+ mulhwu $t3,$h3,$s2
+ addc $d0,$d0,$t0
+ adde $D0,$D0,$t1
+
+ mullw $t0,$h3,$s3 # h3*s3
+ mulhwu $t1,$h3,$s3
+ addc $d1,$d1,$t2
+ adde $D1,$D1,$t3
+
+ mullw $t2,$h3,$r0 # h3*r0
+ mulhwu $t3,$h3,$r0
+ addc $d2,$d2,$t0
+ adde $D2,$D2,$t1
+
+ mullw $t0,$h4,$s1 # h4*s1
+ addc $d3,$d3,$t2
+ adde $D3,$D3,$t3
+ addc $d1,$d1,$t0
+
+ mullw $t1,$h4,$s2 # h4*s2
+ addze $D1,$D1
+ addc $d2,$d2,$t1
+ addze $D2,$D2
+
+ mullw $t2,$h4,$s3 # h4*s3
+ addc $d3,$d3,$t2
+ addze $D3,$D3
+
+ mullw $h4,$h4,$r0 # h4*r0
+
+ addc $h1,$d1,$D0
+ adde $h2,$d2,$D1
+ adde $h3,$d3,$D2
+ adde $h4,$h4,$D3
+
+ andc $D0,$h4,$mask # final reduction step
+ and $h4,$h4,$mask
+ srwi $D1,$D0,2
+ add $D0,$D0,$D1
+ addc $h0,$d0,$D0
+ addze $h1,$h1
+ addze $h2,$h2
+ addze $h3,$h3
+ addze $h4,$h4
+
+ bdnz Loop
+
+ stw $h0,0($ctx) # store hash value
+ stw $h1,4($ctx)
+ stw $h2,8($ctx)
+ stw $h3,12($ctx)
+ stw $h4,16($ctx)
+
+ $POP r14,`$FRAME-$SIZE_T*18`($sp)
+ $POP r15,`$FRAME-$SIZE_T*17`($sp)
+ $POP r16,`$FRAME-$SIZE_T*16`($sp)
+ $POP r17,`$FRAME-$SIZE_T*15`($sp)
+ $POP r18,`$FRAME-$SIZE_T*14`($sp)
+ $POP r19,`$FRAME-$SIZE_T*13`($sp)
+ $POP r20,`$FRAME-$SIZE_T*12`($sp)
+ $POP r21,`$FRAME-$SIZE_T*11`($sp)
+ $POP r22,`$FRAME-$SIZE_T*10`($sp)
+ $POP r23,`$FRAME-$SIZE_T*9`($sp)
+ $POP r24,`$FRAME-$SIZE_T*8`($sp)
+ $POP r25,`$FRAME-$SIZE_T*7`($sp)
+ $POP r26,`$FRAME-$SIZE_T*6`($sp)
+ $POP r27,`$FRAME-$SIZE_T*5`($sp)
+ $POP r28,`$FRAME-$SIZE_T*4`($sp)
+ $POP r29,`$FRAME-$SIZE_T*3`($sp)
+ $POP r30,`$FRAME-$SIZE_T*2`($sp)
+ $POP r31,`$FRAME-$SIZE_T*1`($sp)
+ addi $sp,$sp,$FRAME
+Labort:
+ blr
+ .long 0
+ .byte 0,12,4,1,0x80,18,4,0
+.size .poly1305_blocks,.-.poly1305_blocks
+
+.globl .poly1305_emit
+.align 4
+.poly1305_emit:
+ $STU $sp,-$FRAME($sp)
+ mflr r0
+ $PUSH r28,`$FRAME-$SIZE_T*4`($sp)
+ $PUSH r29,`$FRAME-$SIZE_T*3`($sp)
+ $PUSH r30,`$FRAME-$SIZE_T*2`($sp)
+ $PUSH r31,`$FRAME-$SIZE_T*1`($sp)
+ $PUSH r0,`$FRAME+$LRSAVE`($sp)
+
+ lwz $h0,0($ctx) # load hash
+ lwz $h1,4($ctx)
+ lwz $h2,8($ctx)
+ lwz $h3,12($ctx)
+ lwz $h4,16($ctx)
+
+ addic $d0,$h0,5 # compare to modulus
+ addze $d1,$h1
+ addze $d2,$h2
+ addze $d3,$h3
+ addze $mask,$h4
+
+ srwi $mask,$mask,2 # did it carry/borrow?
+ neg $mask,$mask
+
+ andc $h0,$h0,$mask
+ and $d0,$d0,$mask
+ andc $h1,$h1,$mask
+ and $d1,$d1,$mask
+ or $h0,$h0,$d0
+ lwz $d0,0($nonce) # load nonce
+ andc $h2,$h2,$mask
+ and $d2,$d2,$mask
+ or $h1,$h1,$d1
+ lwz $d1,4($nonce)
+ andc $h3,$h3,$mask
+ and $d3,$d3,$mask
+ or $h2,$h2,$d2
+ lwz $d2,8($nonce)
+ or $h3,$h3,$d3
+ lwz $d3,12($nonce)
+
+ addc $h0,$h0,$d0 # accumulate nonce
+ adde $h1,$h1,$d1
+ adde $h2,$h2,$d2
+ adde $h3,$h3,$d3
+___
+$code.=<<___ if ($LITTLE_ENDIAN);
+ stw $h0,0($mac) # write result
+ stw $h1,4($mac)
+ stw $h2,8($mac)
+ stw $h3,12($mac)
+___
+$code.=<<___ if (!$LITTLE_ENDIAN);
+ li $d1,4
+ stwbrx $h0,0,$mac # write result
+ li $d2,8
+ stwbrx $h1,$d1,$mac
+ li $d3,12
+ stwbrx $h2,$d2,$mac
+ stwbrx $h3,$d3,$mac
+___
+$code.=<<___;
+ $POP r28,`$FRAME-$SIZE_T*4`($sp)
+ $POP r29,`$FRAME-$SIZE_T*3`($sp)
+ $POP r30,`$FRAME-$SIZE_T*2`($sp)
+ $POP r31,`$FRAME-$SIZE_T*1`($sp)
+ addi $sp,$sp,$FRAME
+ blr
+ .long 0
+ .byte 0,12,4,1,0x80,4,3,0
+.size .poly1305_emit,.-.poly1305_emit
+___
+ }
+$code.=<<___;
+.asciz "Poly1305 for PPC, CRYPTOGAMS by <appro\@openssl.org>"
+___
+
+$code =~ s/\`([^\`]*)\`/eval $1/gem;
+print $code;
+close STDOUT;