diff options
268 files changed, 13999 insertions, 30361 deletions
diff --git a/FAQ b/FAQ deleted file mode 100644 index 357650a589bd..000000000000 --- a/FAQ +++ /dev/null @@ -1,160 +0,0 @@ -@(#)FAQ 8.13 (Berkeley) 10/14/96 - -Q: How can I get vi to display my character set? -A: Vi uses the C library routine isprint(3) to determine if a character - is printable, or should be displayed as an octal or hexadecimal value - on the screen. Generally, if vi is displaying printable characters - in octal/hexadecimal forms, your environment is not configured correctly. - Try looking at the man pages that allow you to configure your locale. - For example, to configure an ISO 8859-1 locale under Solaris using csh, - you would do: - - setenv LANG C - setenv LC_CTYPE iso_8859_1 - - Other LC_CTYPE systems/values that I'm told work: - - System Value - ====== ===== - FreeBSD lt_LN.ISO_8859-1 - HP-UX 9.X american.iso88591 - HP-UX 10.X en_US.iso88591 - SunOS 4.X iso_8859_1 - SunOS 5.X iso_8859_1 - - If there's no other solution, you can use the print and noprint edit - options of vi to specify that a specific character is printable or not - printable. - -Q: My map won't work! -A: One thing that you should immediately check if a vi map doesn't work - is if depends on the final cursor position after a P or p command. - Historic vi's were inconsistent as to the final position of the cursor, - and, to make matter worse, the final cursor position also depended on - whether the put text came from a named or unnamed buffer! Vi follows - the POSIX 1003.2 standard on this one, and makes this consistent, always - placing the cursor on the first character. - -Q: I'm using ksh or csh as my vi edit option shell value, and file - expansions don't work right! -A: The problem may be in your ksh or csh startup files, e.g., .cshrc. Vi - executes the shell to do name expansion, and the shell generally reads - its startup files. If the startup files are not correctly configured - for non-interactive use, e.g., they always echo a prompt to the screen, - vi will be unable to parse the output and things will not work - correctly. - -Q: How does the iclower edit option differ from the ignorecase (i.e. ic) - edit option? -A: The difference is that the ignorecase edit option always ignores the - case of letters in the Regular Expression (RE), and the iclower edit - option only ignores the case if there are no upper-case letters in the - RE. If any upper-case letters appear in the Regular Expression, then - it will be treated case-sensitively, as if the ignorecase edit option - was not set. - -Q: When I edit binary files, vi appends a <newline> to the last line! -A: This is historic practice for vi, and further, it's required by the - POSIX 1003.2 standard. My intent is to provide a command line and/or - edit option to turn this behavior off when I switch to version 2.0 of - the Berkeley DB package. - -Q: My cursor keys don't work when I'm in text input mode! -A: A common problem over slow links is that the set of characters sent by - the cursor keys don't arrive close enough together for vi to understand - that they are a single keystroke, and not separate keystrokes. Try - increasing the value of the escapetime edit option, which will cause - vi to wait longer before deciding that the <escape> character that - starts cursor key sequences doesn't have any characters following it. - -Q: When I edit some files, vi seems to hang forever, and I have to kill it. -A: Vi uses flock(2) and fcntl(2) to do file locking. When it attempts to - acquired a lock for a file on an NFS mounted filesystem, it can hang - for a very long (perhaps infinite) period of time. Turning off the - "lock" edit option will keep vi from attempting to acquire any locks - on the files you edit. - -Q: When I compile vi I get lots of warnings about pointer assignments - being incompatible! -A: Vi is partially written to support wide characters. When this code - interfaces with the code that doesn't yet support wide characters, - the pointer types clash. This will hopefully be fixed in the near - future, but I've been saying that for awhile, now. - -Q: I get jumpy scrolling behavior in the screen! -A: This is almost certainly a problem with the system's terminfo or - termcap information for your terminal. If the terminfo/termcap entry - doesn't have the settable scrolling region capabilities, or the more - powerful scrolling commands, these behaviors can result. Historic - implementations of vi, and some of the vi clones, don't suffer from - this problem because they wrote their own screen support instead of - using the curses library. - - The solution is to find a good terminfo or termcap entry for your - terminal, which will fix the problem for all of the applications on - your system, not just vi. Eric Raymond maintains the freely - redistributable termcap/terminfo entries. They can be downloaded - from http://www.ccil.org/~esr/ncurses.html, or you can contact him - at esr@snark.thyrsus.com. - -Q: The entire screen repaints on every keystroke! -A: Your system's curses implementation is broken. You should use the - curses implementation provided with vi or a curses replacement such - as ncurses. Eric Raymond is one of the maintainers of the freely - redistributable ncurses package. You can download ncurses from - http://www.ccil.org/~esr/ncurses.html, or you can contact him at - esr@snark.thyrsus.com. - -Q: When I use vi on a Sun console (terminal type sun-34) the screen - is occasionally trashed, usually when exiting vi! -A: The Sun console can't handle the 'al' capability of the termcap - entry (the il1 capability of terminfo entries). If you delete that - entry from your terminfo/termcap information everything should work - correctly. - -Q: I don't have a version of ctags (or I have ctags, but it doesn't tag - nearly enough things)! -A: There's a version of ctags available on the 4.4BSD-Lite distributions, - as well as the FreeBSD, NetBSD, Linux and GNU distributions. Or, you - might want to try Exuberant Ctags: - - Title: Exuberant Ctags - Version: 1.3 - Entered-date: 16JUN96 - Description: - A better ctags which generates tags for all possible tag types: - macro definitions, enumerated values (values inside enum{...}), - function and method definitions, enum/struct/union tags, external - function prototypes (optional), typedefs, and variable - declarations. It is far less easily fooled by code containing #if - preprocessor conditional constructs, using a conditional path - selection algorithm to resolve complicated choices, and a - fall-back algorithm when this one fails. Can also be used to print - out a list of selected objects found in source files. - Keywords: ctags, tags, exuberant - Author: darren@sirsi.com (Darren Hiebert) - darren@hiwaay.net (Darren Hiebert) - Maintained-by: darren@sirsi.com (Darren Hiebert) - darren@hiwaay.net (Darren Hiebert) - Primary-site: sunsite.unc.edu /pub/Linux/devel/lang/c - 27kB ctags-1.3.tar.gz - Alternate-site: ftp.halcyon.com /local/gvr - 27kB ctags-1.3.tar.gz - Original-site: - Platforms: UNIX, MSDOS, WindowsNT, Windows95, OS/2, Amiga - Copying-policy: Public domain - -Q: When I update a file I already have open, and use :e to reread it, I - get nul's for the rest of the file! -A: Your system's implementation of mmap(2) has a bug; you will have to - exit vi and re-execute it. - -Q: Where can I get cscope? -A: Cscope is available on UNIXWare System V Release 4.0 variants such as - Sun Solaris 2.x (/opt/SUNWspro/bin) and UNIXWare System V Release 4.1. - - You can buy version 13.3 source with an unrestricted license for $400 - from AT&T Software Solutions by calling +1-800-462-8146. Binary - redistribution of cscope is an additional $1500, one-time flat fee. - - For more information, see http://www.unipress.com/att/new/cscope.html. diff --git a/LAYOUT b/LAYOUT deleted file mode 100644 index e3a55ebb5778..000000000000 --- a/LAYOUT +++ /dev/null @@ -1,128 +0,0 @@ -# @(#)LAYOUT 8.12 (Berkeley) 10/10/96 - -LAYOUT - This file: the layout of the nvi sources. - -LICENSE - Nvi's copyright notice and conditions for redistribution. - -README - Welcome message and basic information. - -build/ - The build/configuration directory for nvi. See build/README for - more information. - -catalog/ - Support for message catalogs for nvi. See catalog/README for more - information. - -cl/ - Source files for nvi's curses screen support. - -clib/ - Replacement source files for C library functions. - -common/ - Source files for pieces of code that are shared by ex and vi, - e.g., searching and logging code or code translating line numbers - into requests to the dbopen(3) database code. It also has the - interface code for modifying "records" in the underlying database. - -curses/ - A stripped-down replacement curses library. Do not try and use - this library outside of nvi, many standard curses functions have - been removed because nvi doesn't use them. See build/README for - more information. - -db/ - A stripped-down replacement DB library. Do not try and use this - library outside of nvi, many standard DB functions have been - removed because nvi doesn't use them. See db/README for more - information. - -docs/ - Ex/vi documentation, both current and historic. - - USD.doc/ - [USD stands for "User's Supplementary Documents".] - - edit/ Roff source for "Edit: A tutorial". This document - was USD:14 in the 4.3BSD manuals, but was not - distributed with 4.4BSD. - - exref/ Roff source for "Ex Reference Manual -- Version - 3.7". This document was USD:16 in the 4.3BSD - manuals, and USD tabbed 12 in the 4.4BSD manuals. - - vi.man/ Roff source for a UNIX manual page for nex/nvi. - An updated version of the 4.4BSD manual page. - - vi.ref/ Roff source for the nex/nvi reference document. - An updated version of the 4.4BSD document, USD - tabbed 13. - - vitut/ Roff source for "An Introduction to Display - Editing with Vi". This document was USD:15 in - the 4.3BSD manuals, but was not distributed with - 4.4BSD. It includes the historic "Vi Quick - Reference" card. - - - PostScript preformatted versions of the nex/nvi reference - manual and manual page are in the files named with a ".ps" - suffix, in their respective source directories. Flat text - preformatted versions of the nex/nvi reference manual and - manual page are in the files named with a ".txt" suffix, - in their respective source directories. - - changelog -- Log of changes from version to version. - features -- Todo list, suggested features list. - internals/ - autowrite -- Vi autowrite option discussion. - context -- Previous context marks discussion. - gdb.script -- GDB debugging scripts. - input -- Vi maps, executable buffers, and input discussion. - openmode -- Open mode behaviors. - quoting -- Vi quoting discussion. - structures -- Out-of-date nvi internal structure description. - tutorial/ -- Historic vi tutorial(s), of unknown quality. - -ex/ - The ex source code. Because vi has the colon command, lots of - this code is used by vi. Generally, if functionality is shared - by both ex and vi, it's in the ex directory. If it's vi only, - it's in the vi directory. Files are generally named by the - command(s) they support, but occasionally with a name that - describes their functionality. - - version.h -- Version information. - -include/ - Replacement include files: - - bitstring.h -- The 4.4BSD bitstring operations. - sys/queue.h -- The 4.4BSD queue operations. - -perl_api/ - Source code supporting the Perl scripting language for nvi. - -perl_scripts/ - Scripts for Perl included with nvi. - -regex/ - Henry Spencer's POSIX 1003.2 regular expression (RE) library. - -tcl_api/ - Source code supporting the Tcl scripting language for nvi. - -tcl_scripts/ - Scripts for Tcl included with nvi. - -tk/ - Source files for nvi's Tk screen support. - - init.tcl -- Vi startup tcl script. - -vi/ - The vi source code. @@ -1,14 +1,19 @@ -The vi program is freely redistributable. You are welcome to copy, modify -and share it with others under the conditions listed in this file. If any -company (not any individual!) finds vi sufficiently useful that you would -have purchased it, or if any company wishes to redistribute it, contributions -to the authors would be appreciated. - /*- + * $Id: LICENSE,v 8.18 2011/07/10 11:58:35 zy Exp $ + */ + +The following are the copyrights and redistribution conditions that apply +to this copy of the Vi software. + +/* * Copyright (c) 1991, 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. - * Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996 + * Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000 * Keith Bostic. All rights reserved. + * Copyright (c) 1999, 2000 + * Sven Verdoolaege. All rights reserved. + * Copyright (c) 2011 + * Zhihao Yuan. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -18,11 +23,7 @@ to the authors would be appreciated. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the University of - * California, Berkeley and its contributors. - * 4. Neither the name of the University nor the names of its contributors + * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * @@ -1,31 +1,32 @@ -# @(#)README 8.147 (Berkeley) 10/19/96 +# $Id: README,v 9.0 2012/10/07 09:13:54 zy Exp $ -This is the README for nex/nvi, a freely redistributable implementation -of the ex/vi text editors originally distributed as part of the Fourth -Berkeley Software Distribution (4BSD), by the University of California, -Berkeley. +This is version 2.1.1 (2012-10-07) of nex/nvi, a reimplementation of the ex/vi +text editors originally distributed as part of the Fourth Berkeley +Software Distribution (4BSD), by the University of California, Berkeley. -The source code for nex/nvi can be retrieved by using anonymous ftp to -ftp.cs.berkeley.edu. The file ucb/4bsd/nvi.tar.gz is the gzip'd archive, -of version 1.71 of nex/nvi. This version is believed to be stable and -problem free. The file ucb/4bsd/nvi-###.ALPHA.tar.gz is a gzip'd archive -of the current alpha-test release of nex/nvi. This version reflects the -current development tree, and will be more likely to have problems. +The directory layout is as follows: -See the file: - build/README for information on building nvi. - LAYOUT for a description of where everything is. - LICENSE for the copyright and redistribution terms. + LICENSE ....... Copyright, use and redistribution information. + README ........ This file. + build ......... Build directory. + catalog ....... Message catalogs; see catalog/README. + cl ............ Vi interface to the curses(3) library. + common ........ Code shared by ex and vi. + docs .......... Ex/vi documentation, both current and historic. + ex ............ Ex source code. + regex ......... Modified regex library with wide character support. + vi ............ Vi source code. -If you have any questions about nex/nvi, problems with it, or concerns -about the conditions for redistribution, please contact me: +=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= + +o Nvi was written by Keith Bostic, and the last version is 1.79. After that, - Keith Bostic +1-508-287-4781 - 394 E. Riding Dr. bostic@bostic.com - Carlisle, MA 01741 - USA + Sven Verdoolaege added the iconv support and the DB3 locking. -Keith Bostic + Jun-ichiro itojun Hagino developed the file encoding detection + techniques in his nvi-m17n. + +The following acknowledgments were written by Keith Bostic: =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= o This software is several years old and is the product of many folks' work. @@ -63,51 +64,3 @@ o From the original vi acknowledgements, by William Joy and Mark Horton: o And... The financial support of UUNET Communications Services is gratefully acknowledged. - -=-=-=-=-=-=-=-=-=-=-= -o Status: - -This software is in beta test, and it's pretty stable. Almost all of the -historic functionality in ex/vi is there, the only major missing pieces -are open mode and the lisp edit option. - -Nvi is largely 8-bit clean. This isn't difficult to fix, and was left in -during initial development to keep things simple. Wide character support -will be integrated at the same time that it is made fully 8-bit clean. - -There aren't a lot of new features in nex/nvi, but there are a few things -you might like. The "Additional Features" section of the reference work -(docs/USD.doc/vi.ref/vi.ref.txt, docs/USD.doc/vi.ref/vi.ref.ps) has more -information. - -=-=-=-=-=-=-=-=-=-=-= -o Debugging: - -Code fixes are greatly appreciated, of course, but if you can't provide -them, please email me as much information as you can as to how I might -reproduce the bug, and I'll try to fix it locally. Stack traces of core -dumps are only rarely helpful -- an example file with a set of keystrokes -that causes the problem is almost invariably necessary. I know it's -annoying, but simply playing with the bug until you can reproduce it at -will, with minimal keystrokes, is immensely helpful to me. - -Please include the following in the bug report; - - o The version of nvi you're running (use :version to get it). - o The row/column dimensions of the screen (80 x 32). - o Unless you're confident that they're not part of the problem, - your startup files (.exrc, .nexrc) and the environment variable - (EXINIT, NEXINIT) values. (Cutting and pasting the output - of ":set all" is usually sufficient.) - -If you want to do your own debugging, recompile the program with DEBUG -defined. (Configuring with --enable-debug will do this for you.) This -turns on the additional command-line option -D, that takes either s or w -as an argument. The option -Ds causes nvi to ignore the EXINIT and -.exrc files on startup, and -Dw causes nvi to print out the process id -and wait for you to enter a <carriage-return> to continue. - -If you're running a memory checker (e.g. Purify) on nvi, you will first -want to recompile everything with "-DPURIFY" set in the CFLAGS. This -initializes allocated pages in the DB code, and free's allocated memory -at the end of the nvi execution. diff --git a/build/ExtUtils/Embed.pm b/build/ExtUtils/Embed.pm deleted file mode 100644 index 04525c18c908..000000000000 --- a/build/ExtUtils/Embed.pm +++ /dev/null @@ -1,473 +0,0 @@ -# $Id: Embed.pm,v 1.17 1996/07/02 13:48:17 dougm Exp $ -require 5.002; - -package ExtUtils::Embed; -require Exporter; -require FileHandle; -use Config; -use Getopt::Std; - -#Only when we need them -#require ExtUtils::MakeMaker; -#require ExtUtils::Liblist; - -use vars qw(@ISA @EXPORT $VERSION - @Extensions $Verbose $lib_ext - $opt_o $opt_s - ); -use strict; - -$VERSION = sprintf("%d.%02d", q$Revision: 1.17 $ =~ /(\d+)\.(\d+)/); -#for the namespace change -$Devel::embed::VERSION = "99.99"; - -sub Version { $VERSION; } - -@ISA = qw(Exporter); -@EXPORT = qw(&xsinit &ldopts - &ccopts &ccflags &ccdlflags &perl_inc - &xsi_header &xsi_protos &xsi_body); - -#let's have Miniperl borrow from us instead -#require ExtUtils::Miniperl; -#*canon = \&ExtUtils::Miniperl::canon; - -$Verbose = 0; -$lib_ext = $Config{lib_ext} || '.a'; - -sub xsinit { - my($file, $std, $mods) = @_; - my($fh,@mods,%seen); - $file ||= "perlxsi.c"; - - if (@_) { - @mods = @$mods if $mods; - } - else { - getopts('o:s:'); - $file = $opt_o if defined $opt_o; - $std = $opt_s if defined $opt_s; - @mods = @ARGV; - } - $std = 1 unless scalar @mods; - - if ($file eq "STDOUT") { - $fh = \*STDOUT; - } - else { - $fh = new FileHandle "> $file"; - } - - push(@mods, static_ext()) if defined $std; - @mods = grep(!$seen{$_}++, @mods); - - print $fh &xsi_header(); - print $fh "EXTERN_C void xs_init _((void));\n\n"; - print $fh &xsi_protos(@mods); - - print $fh "\nEXTERN_C void\nxs_init()\n{\n"; - print $fh &xsi_body(@mods); - print $fh "}\n"; - -} - -sub xsi_header { - return <<EOF; -#ifdef __cplusplus -extern "C" { -#endif - -#include <EXTERN.h> -#include <perl.h> - -#ifdef __cplusplus -} -# ifndef EXTERN_C -# define EXTERN_C extern "C" -# endif -#else -# ifndef EXTERN_C -# define EXTERN_C extern -# endif -#endif - -EOF -} - -sub xsi_protos { - my(@exts) = @_; - my(@retval,%seen); - - foreach $_ (@exts){ - my($pname) = canon('/', $_); - my($mname, $cname); - ($mname = $pname) =~ s!/!::!g; - ($cname = $pname) =~ s!/!__!g; - my($ccode) = "EXTERN_C void boot_${cname} _((CV* cv));\n"; - next if $seen{$ccode}++; - push(@retval, $ccode); - } - return join '', @retval; -} - -sub xsi_body { - my(@exts) = @_; - my($pname,@retval,%seen); - my($dl) = canon('/','DynaLoader'); - push(@retval, "\tdXSUB_SYS;\n") if $] > 5.002; - push(@retval, "\tchar *file = __FILE__;\n\n"); - - foreach $_ (@exts){ - my($pname) = canon('/', $_); - my($mname, $cname, $ccode); - ($mname = $pname) =~ s!/!::!g; - ($cname = $pname) =~ s!/!__!g; - if ($pname eq $dl){ - # Must NOT install 'DynaLoader::boot_DynaLoader' as 'bootstrap'! - # boot_DynaLoader is called directly in DynaLoader.pm - $ccode = "\t/* DynaLoader is a special case */\n\tnewXS(\"${mname}::boot_${cname}\", boot_${cname}, file);\n"; - push(@retval, $ccode) unless $seen{$ccode}++; - } else { - $ccode = "\tnewXS(\"${mname}::bootstrap\", boot_${cname}, file);\n"; - push(@retval, $ccode) unless $seen{$ccode}++; - } - } - return join '', @retval; -} - -sub static_ext { - unless (scalar @Extensions) { - @Extensions = sort split /\s+/, $Config{static_ext}; - unshift @Extensions, qw(DynaLoader); - } - @Extensions; -} - -sub ldopts { - require ExtUtils::MakeMaker; - require ExtUtils::Liblist; - my($std,$mods,$link_args,$path) = @_; - my(@mods,@link_args,@argv); - my($dllib,$config_libs,@potential_libs,@path); - local($") = ' ' unless $" eq ' '; - my $MM = bless {} => 'MY'; - if (scalar @_) { - @link_args = @$link_args if $link_args; - @mods = @$mods if $mods; - } - else { - @argv = @ARGV; - #hmm - while($_ = shift @argv) { - /^-std$/ && do { $std = 1; next; }; - /^--$/ && do { @link_args = @argv; last; }; - /^-I(.*)/ && do { $path = $1 || shift @argv; next; }; - push(@mods, $_); - } - } - $std = 1 unless scalar @link_args; - @path = $path ? split(/:/, $path) : @INC; - - push(@potential_libs, @link_args) if scalar @link_args; - push(@potential_libs, $Config{libs}) if defined $std; - - push(@mods, static_ext()) if $std; - - my($mod,@ns,$root,$sub,$extra,$archive,@archives); - print STDERR "Searching (@path) for archives\n" if $Verbose; - foreach $mod (@mods) { - @ns = split('::', $mod); - $sub = $ns[-1]; - $root = $MM->catdir(@ns); - - print STDERR "searching for '$sub${lib_ext}'\n" if $Verbose; - foreach (@path) { - next unless -e ($archive = $MM->catdir($_,"auto",$root,"$sub$lib_ext")); - push @archives, $archive; - if(-e ($extra = $MM->catdir($_,"auto",$root,"extralibs.ld"))) { - local(*FH); - if(open(FH, $extra)) { - my($libs) = <FH>; chomp $libs; - push @potential_libs, split /\s+/, $libs; - } - else { - warn "Couldn't open '$extra'"; - } - } - last; - } - } - #print STDERR "\@potential_libs = @potential_libs\n"; - - my($extralibs, $bsloadlibs, $ldloadlibs, $ld_run_path) = - $MM->ext(join ' ', - $MM->catdir("-L$Config{archlib}", "CORE"), " -lperl", - @potential_libs); - - my $ld_or_bs = $bsloadlibs || $ldloadlibs; - print STDERR "bs: $bsloadlibs ** ld: $ldloadlibs" if $Verbose; - my $linkage = "$Config{ldflags} @archives $ld_or_bs"; - print STDERR "ldopts: '$linkage'\n" if $Verbose; - - return $linkage if scalar @_; - print "$linkage\n"; -} - -sub ccflags { - print " $Config{ccflags} "; -} - -sub ccdlflags { - print " $Config{ccdlflags} "; -} - -sub perl_inc { - print " -I$Config{archlib}/CORE "; -} - -sub ccopts { - ccflags; - ccdlflags; - perl_inc; -} - -sub canon { - my($as, @ext) = @_; - foreach(@ext) { - # might be X::Y or lib/auto/X/Y/Y.a - next if s!::!/!g; - s:^(lib|ext)/(auto/)?::; - s:/\w+\.\w+$::; - } - grep(s:/:$as:, @ext) if ($as ne '/'); - @ext; -} - -__END__ - -=head1 NAME - -ExtUtils::Embed - Utilities for embedding Perl in C/C++ applications - -=head1 SYNOPSIS - - - perl -MExtUtils::Embed -e xsinit - perl -MExtUtils::Embed -e ldopts - -=head1 DESCRIPTION - -ExtUtils::Embed provides utility functions for embedding a Perl interpreter -and extensions in your C/C++ applications. -Typically, an application B<Makefile> will invoke ExtUtils::Embed -functions while building your application. - -=head1 @EXPORT - -ExtUtils::Embed exports the following functions: - -L<xsinit()>, L<ldopts()>, L<ccopts()>, L<perl_inc()>, L<ccflags()>, -L<ccdlflags()>, L<xsi_header()>, L<xsi_protos()>, L<xsi_body()> - -=head1 FUNCTIONS - -=item xsinit() - -Generate C/C++ code for the XS intializer function. - -When invoked as C<`perl -MExtUtils::Embed -e xsinit --`> -the following options are recognized: - -B<-o> <output filename> (Defaults to B<perlxsi.c>) - -B<-o STDOUT> will print to STDOUT. - -B<-std> (Write code for extensions that are linked with the current Perl.) - -Any additional arguments are expected to be names of modules -to generate code for. - -When invoked with parameters the following are accepted and optional: - -C<xsinit($filename,$std,[@modules])> - -Where, - -B<$filename> is equivalent to the B<-o> option. - -B<$std> is boolean, equivalent to the B<-std> option. - -B<[@modules]> is an array ref, same as additional arguments mentioned above. - -=item Examples - - - perl -MExtUtils::Embed -e xsinit -- -o xsinit.c Socket - - -This will generate code with an B<xs_init> function that glues the perl B<Socket::bootstrap> function -to the C B<boot_Socket> function and writes it to a file named "xsinit.c". - -Note that B<DynaLoader> is a special case where it must call B<boot_DynaLoader> directly. - - perl -MExtUtils::Embed -e xsinit - - -This will generate code for linking with B<DynaLoader> and -each static extension found in B<$Config{static_ext}>. -The code is written to the default file name B<perlxsi.c>. - - - perl -MExtUtils::Embed -e xsinit -- -o xsinit.c -std DBI DBD::Oracle - - -Here, code is written for all the currently linked extensions along with code -for B<DBI> and B<DBD::Oracle>. - -If you have a working B<DynaLoader> then there is rarely any need to statically link in any -other extensions. - -=item ldopts() - -Output arguments for linking the Perl library and extensions to your -application. - -When invoked as C<`perl -MExtUtils::Embed -e ldopts --`> -the following options are recognized: - -B<-std> - -Output arguments for linking the Perl library and any extensions linked -with the current Perl. - -B<-I> <path1:path2> - -Search path for ModuleName.a archives. -Default path is B<@INC>. -Library archives are expected to be found as -B</some/path/auto/ModuleName/ModuleName.a> -For example, when looking for B<Socket.a> relative to a search path, -we should find B<auto/Socket/Socket.a> - -When looking for B<DBD::Oracle> relative to a search path, -we should find B<auto/DBD/Oracle/Oracle.a> - -Keep in mind, you can always supply B</my/own/path/ModuleName.a> -as an additional linker argument. - -B<--> <list of linker args> - -Additional linker arguments to be considered. - -Any additional arguments found before the B<--> token -are expected to be names of modules to generate code for. - -When invoked with parameters the following are accepted and optional: - -C<ldopts($std,[@modules],[@link_args],$path)> - -Where, - -B<$std> is boolean, equivalent to the B<-std> option. - -B<[@modules]> is equivalent to additional arguments found before the B<--> token. - -B<[@link_args]> is equivalent to arguments found after the B<--> token. - -B<$path> is equivalent to the B<-I> option. - -In addition, when ldopts is called with parameters, it will return the argument string -rather than print it to STDOUT. - -=item Examples - - - perl -MExtUtils::Embed -e ldopts - - -This will print arguments for linking with B<libperl.a>, B<DynaLoader> and -extensions found in B<$Config{static_ext}>. This includes libraries -found in B<$Config{libs}> and the first ModuleName.a library -for each extension that is found by searching B<@INC> or the path -specifed by the B<-I> option. -In addition, when ModuleName.a is found, additional linker arguments -are picked up from the B<extralibs.ld> file in the same directory. - - - perl -MExtUtils::Embed -e ldopts -- -std Socket - - -This will do the same as the above example, along with printing additional arguments for linking with the B<Socket> extension. - - - perl -MExtUtils::Embed -e ldopts -- DynaLoader - - -This will print arguments for linking with just the B<DynaLoader> extension -and B<libperl.a>. - - - perl -MExtUtils::Embed -e ldopts -- -std Msql -- -L/usr/msql/lib -lmsql - - -Any arguments after the second '--' token are additional linker -arguments that will be examined for potential conflict. If there is no -conflict, the additional arguments will be part of the output. - - -=item perl_inc() - -For including perl header files this function simply prints: - - -I $Config{archlib}/CORE - -So, rather than having to say: - - perl -MConfig -e 'print "-I $Config{archlib}/CORE"' - -Just say: - - perl -MExtUtils::Embed -e perl_inc - -=item ccflags(), ccdlflags() - -These functions simply print $Config{ccflags} and $Config{ccdlflags} - -=item ccopts() - -This function combines perl_inc(), ccflags() and ccdlflags() into one. - -=item xsi_header() - -This function simply returns a string defining the same B<EXTERN_C> macro as -B<perlmain.c> along with #including B<perl.h> and B<EXTERN.h>. - -=item xsi_protos(@modules) - -This function returns a string of B<boot_$ModuleName> prototypes for each @modules. - -=item xsi_body(@modules) - -This function returns a string of calls to B<newXS()> that glue the module B<bootstrap> -function to B<boot_ModuleName> for each @modules. - -B<xsinit()> uses the xsi_* functions to generate most of it's code. - -=head1 EXAMPLES - -For examples on how to use B<ExtUtils::Embed> for building C/C++ applications -with embedded perl, see the eg/ directory and the I<perlembed> man page. - -=head1 SEE ALSO - -the I<perlembed> man page - -=head1 AUTHOR - -Doug MacEachern <dougm@osf.org> - -Based on ideas from Tim Bunce <Tim.Bunce@ig.co.uk> and -B<minimod.pl> by Andreas Koenig <k@anna.in-berlin.de> and Tim Bunce. - -=cut - diff --git a/build/Makefile.in b/build/Makefile.in deleted file mode 100644 index 54025e7d3b9d..000000000000 --- a/build/Makefile.in +++ /dev/null @@ -1,630 +0,0 @@ -# @(#)Makefile.in 8.75 (Berkeley) 10/23/96 - -srcdir= @srcdir@/.. -CC= @CC@ -OPTFLAG=@OPTFLAG@ -CFLAGS= -c $(OPTFLAG) @CFLAGS@ -I. -I$(srcdir)/include @CPPFLAGS@ -LDFLAGS=@LDFLAGS@ -PERL= @vi_cv_path_perl@ -PERLLIB=@vi_cv_perllib@ -SHRPENV=@shrpenv@ - -# Objects -COBJS= addbytes.o addch.o box.o clear.o clrtobot.o clrtoeol.o \ - cr_put.o ctrace.o cur_hash.o curses.o delch.o deleteln.o delwin.o \ - erase.o fullname.o getch.o getstr.o id_subwins.o idlok.o initscr.o \ - insch.o insertln.o longname.o move.o mvwin.o newwin.o overlay.o \ - overwrite.o putchar.o refresh.o scroll.o setterm.o standout.o \ - toucholap.o touchwin.o tscroll.o tstp.o tty.o unctrl.o waddnstr.o -CLOBJS= cl_bsd.o cl_funcs.o cl_main.o cl_read.o cl_screen.o cl_term.o -DBOBJS= db.o mpool.o \ - bt_close.o bt_conv.o bt_debug.o bt_delete.o bt_get.o bt_open.o \ - bt_overflow.o bt_page.o bt_put.o bt_search.o bt_seq.o \ - bt_split.o bt_utils.o \ - rec_close.o rec_delete.o rec_get.o rec_open.o rec_put.o \ - rec_search.o rec_seq.o rec_utils.o -REOBJS= regcomp.o regerror.o regexec.o regfree.o -TKOBJS= tk_funcs.o tk_main.o tk_read.o tk_screen.o tk_term.o tk_util.o -VIOBJS= cut.o delete.o ex.o ex_abbrev.o ex_append.o ex_args.o ex_argv.o \ - ex_at.o ex_bang.o ex_cd.o ex_cmd.o ex_cscope.o ex_delete.o \ - ex_display.o ex_edit.o ex_equal.o ex_file.o ex_filter.o \ - ex_global.o ex_init.o ex_join.o ex_map.o ex_mark.o ex_mkexrc.o \ - ex_move.o ex_open.o ex_perl.o ex_preserve.o ex_print.o ex_put.o \ - ex_quit.o ex_read.o ex_screen.o ex_script.o ex_set.o ex_shell.o \ - ex_shift.o ex_source.o ex_stop.o ex_subst.o ex_tag.o ex_tcl.o \ - ex_txt.o ex_undo.o ex_usage.o ex_util.o ex_version.o ex_visual.o \ - ex_write.o ex_yank.o ex_z.o exf.o getc.o key.o line.o log.o main.o \ - mark.o msg.o options.o options_f.o put.o recover.o screen.o \ - search.o seq.o util.o v_at.o v_ch.o v_cmd.o v_delete.o v_ex.o \ - v_increment.o v_init.o v_itxt.o v_left.o v_mark.o v_match.o \ - v_paragraph.o v_put.o v_redraw.o v_replace.o v_right.o v_screen.o \ - v_scroll.o v_search.o v_section.o v_sentence.o v_status.o v_txt.o \ - v_ulcase.o v_undo.o v_util.o v_word.o v_xchar.o v_yank.o v_z.o \ - v_zexit.o vi.o vs_line.o vs_msg.o vs_refresh.o vs_relative.o \ - vs_smap.o vs_split.o - -all: nvi @tknvi@ - -NVIALL= $(CLOBJS) $(VIOBJS) @cobjs@ @LIBOBJS@ -nvi nex: $(NVIALL) - $(SHRPENV) $(CC) $(LDFLAGS) -o $@ $(NVIALL) @LIBS@ - -rm -f nex - ln $@ nex - -TKALL= $(TKOBJS) $(VIOBJS) @LIBOBJS@ -tknvi: $(TKALL) - $(SHRPENV) $(CC) $(LDFLAGS) -o $@ $(TKALL) @TKLIBS@ - -chmod= @vi_cv_path_chmod@ -cp= @vi_cv_path_cp@ -ln= @vi_cv_path_ln@ -mkdir= @vi_cv_path_mkdir@ -rm= @vi_cv_path_rm@ -strip= @vi_cv_path_strip@ - -prefix= @prefix@ -bindir= @bindir@ -datadir=@datadir@ -mandir= @mandir@ -exec_prefix=@exec_prefix@ - -dmode= 755 -emode= 555 -fmode= 444 - -transform=@program_transform_name@ - -install: all install_common - @echo "Installing vi, ex, view: $(bindir) ..." - [ -d $(bindir) ] || \ - ($(mkdir) $(bindir) && $(chmod) $(dmode) $(bindir)) - cd $(bindir) && $(rm) -f `echo vi | sed '$(transform)'` - $(cp) nvi $(bindir)/`echo vi | sed '$(transform)'` - cd $(bindir) && [ -f $(strip) ] && \ - $(strip) `echo vi | sed '$(transform)'` - cd $(bindir) && $(chmod) $(emode) `echo vi | sed '$(transform)'` - cd $(bindir) && $(rm) -f `echo ex | sed '$(transform)'` - cd $(bindir) && $(rm) -f `echo view | sed '$(transform)'` - cd $(bindir) && $(ln) \ - `echo vi | sed '$(transform)'` `echo ex | sed '$(transform)'` - cd $(bindir) && $(ln) \ - `echo vi | sed '$(transform)'` `echo view | sed '$(transform)'` - [ -d $(mandir) ] || \ - ($(mkdir) $(mandir) && $(chmod) $(dmode) $(mandir)) - [ -d $(mandir)/cat1 ] || \ - ($(mkdir) $(mandir)/cat1 && $(chmod) $(dmode) $(mandir)/cat1) - @echo "Installing man pages: $(mandir) ..." - cd $(mandir)/cat1 && $(rm) -f `echo vi.0 | sed '$(transform)'` - $(cp) $(srcdir)/docs/USD.doc/vi.man/vi.0 \ - $(mandir)/cat1/`echo vi.0 | sed '$(transform)'` - cd $(mandir)/cat1 && $(chmod) $(fmode) `echo vi.0 | sed '$(transform)'` - cd $(mandir)/cat1 && $(rm) -f `echo ex.0 | sed '$(transform)'` - cd $(mandir)/cat1 && $(rm) -f `echo view.0 | sed '$(transform)'` - cd $(mandir)/cat1 && $(ln) \ - `echo vi.0 | sed '$(transform)'` `echo ex.0 | sed '$(transform)'` - cd $(mandir)/cat1 && $(ln) \ - `echo vi.0 | sed '$(transform)'` `echo view.0 | sed '$(transform)'` - [ -d $(mandir)/man1 ] || \ - ($(mkdir) $(mandir)/man1 && $(chmod) $(dmode) $(mandir)/man1) - cd $(mandir)/man1 && $(rm) -f `echo vi.1 | sed '$(transform)'` - $(cp) $(srcdir)/docs/USD.doc/vi.man/vi.1 \ - $(mandir)/man1/`echo vi.1 | sed '$(transform)'` - cd $(mandir)/man1 && $(chmod) $(fmode) `echo vi.1 | sed '$(transform)'` - cd $(mandir)/man1 && $(rm) -f `echo ex.1 | sed '$(transform)'` - cd $(mandir)/man1 && $(rm) -f `echo view.1 | sed '$(transform)'` - cd $(mandir)/man1 && $(ln) \ - `echo vi.1 | sed '$(transform)'` `echo ex.1 | sed '$(transform)'` - cd $(mandir)/man1 && $(ln) \ - `echo vi.1 | sed '$(transform)'` `echo view.1 | sed '$(transform)'` - -cat= dutch english french german ru_SU.KOI8-R spanish swedish -install_common: - [ -f $(chmod) ] - [ -f $(cp) ] - [ -f $(ln) ] - [ -f $(mkdir) ] - [ -f $(rm) ] - [ -d $(prefix) ] || \ - ($(mkdir) $(prefix) && $(chmod) $(dmode) $(prefix)) - [ -d $(exec_prefix) ] || \ - ($(mkdir) $(exec_prefix) && $(chmod) $(dmode) $(exec_prefix)) - [ -d $(datadir) ] || \ - ($(mkdir) $(datadir) && $(chmod) $(dmode) $(datadir)) - $(rm) -rf $(datadir)/vi - $(mkdir) $(datadir)/vi && $(chmod) $(dmode) $(datadir)/vi - @echo "Installing message catalogs: $(datadir)/vi/catalog ..." - $(mkdir) $(datadir)/vi/catalog && \ - $(chmod) $(dmode) $(datadir)/vi/catalog - (cd $(srcdir)/catalog && $(cp) $(cat) $(datadir)/vi/catalog && \ - cd $(datadir)/vi/catalog && $(chmod) $(fmode) *) - @echo "Installing Perl scripts: $(datadir)/vi/perl ..." - $(mkdir) $(datadir)/vi/perl && $(chmod) $(dmode) $(datadir)/vi/perl - [ -f VI.pm ] && $(cp) VI.pm $(datadir)/vi/perl && \ - cd $(datadir)/vi/perl && $(chmod) $(fmode) VI.pm) - (cd $(srcdir)/perl_scripts && $(cp) *.pl $(datadir)/vi/perl && \ - cd $(datadir)/vi/perl && $(chmod) $(fmode) *.pl) - @echo "Installing Tcl scripts: $(datadir)/vi/tcl ..." - $(mkdir) $(datadir)/vi/tcl && $(chmod) $(dmode) $(datadir)/vi/tcl - (cd $(srcdir)/tcl_scripts && $(cp) *.tcl $(datadir)/vi/tcl && \ - cd $(datadir)/vi/tcl && $(chmod) $(fmode) *.tcl) - @echo "Installing recover script: $(datadir)/vi/recover ..." - ($(cp) recover $(datadir)/vi/recover && \ - $(chmod) $(emode) $(datadir)/vi/recover) - -uninstall: - $(rm) -rf $(datadir)/vi - cd $(bindir) && $(rm) -f `echo ex | sed '$(transform)'` - cd $(bindir) && $(rm) -f `echo vi | sed '$(transform)'` - cd $(bindir) && $(rm) -f `echo view | sed '$(transform)'` - cd $(mandir)/cat1 && $(rm) -f `echo ex.0 | sed '$(transform)'` - cd $(mandir)/cat1 && $(rm) -f `echo vi.0 | sed '$(transform)'` - cd $(mandir)/cat1 && $(rm) -f `echo view.0 | sed '$(transform)'` - cd $(mandir)/man1 && $(rm) -f `echo ex.1 | sed '$(transform)'` - cd $(mandir)/man1 && $(rm) -f `echo vi.1 | sed '$(transform)'` - cd $(mandir)/man1 && $(rm) -f `echo view.1 | sed '$(transform)'` - -docs: - cd $(srcdir)/docs/USD.doc/vi.ref && $(MAKE) - cd $(srcdir)/docs/USD.doc/vi.man && $(MAKE) - cd $(srcdir)/docs/USD.doc/edit && $(MAKE) - cd $(srcdir)/docs/USD.doc/exref && $(MAKE) - cd $(srcdir)/docs/USD.doc/vitut && $(MAKE) - -clean: - -rm -f *.core *.o memcpy.c perl.c - -rm -f nex nvi tknvi core - -rm -f $(COBJS) $(CLOBJS) $(DBOBJS) $(REOBJS) - -rm -f $(TKOBJS) $(VIOBJS) - -cleandocs: - cd $(srcdir)/docs/USD.doc/vi.ref && $(MAKE) clean - cd $(srcdir)/docs/USD.doc/vi.man && $(MAKE) clean - cd $(srcdir)/docs/USD.doc/edit && $(MAKE) clean - cd $(srcdir)/docs/USD.doc/exref && $(MAKE) clean - cd $(srcdir)/docs/USD.doc/vitut && $(MAKE) clean - -distclean maintainer-clean realclean: clean cleandocs - -rm -f Makefile config.cache config.h config.log config.status - -rm -f pathnames.h port.h - -# Vi curses sources. -cl_bsd.o: $(srcdir)/cl/cl_bsd.c - $(CC) $(CFLAGS) $? -cl_funcs.o: $(srcdir)/cl/cl_funcs.c - $(CC) $(CFLAGS) $? -cl_main.o: $(srcdir)/cl/cl_main.c - $(CC) $(CFLAGS) $? -cl_read.o: $(srcdir)/cl/cl_read.c - $(CC) $(CFLAGS) $? -cl_screen.o: $(srcdir)/cl/cl_screen.c - $(CC) $(CFLAGS) $? -cl_term.o: $(srcdir)/cl/cl_term.c - $(CC) $(CFLAGS) $? - -# Vi Tk sources. -tk_funcs.o: $(srcdir)/tk/tk_funcs.c - $(CC) $(CFLAGS) @XINCS@ $? -tk_main.o: $(srcdir)/tk/tk_main.c - $(CC) $(CFLAGS) @XINCS@ $? -tk_read.o: $(srcdir)/tk/tk_read.c - $(CC) $(CFLAGS) @XINCS@ $? -tk_screen.o: $(srcdir)/tk/tk_screen.c - $(CC) $(CFLAGS) @XINCS@ $? -tk_term.o: $(srcdir)/tk/tk_term.c - $(CC) $(CFLAGS) @XINCS@ $? -tk_util.o: $(srcdir)/tk/tk_util.c - $(CC) $(CFLAGS) @XINCS@ $? - -# Vi Tcl/Perl interpreter sources. -api.o: $(srcdir)/common/api.c - $(CC) $(CFLAGS) $? -perl.c: $(srcdir)/perl_api/perl.xs $(srcdir)/perl_api/typemap - echo "#define _PATH_PERLSCRIPTS \"$(datadir)/vi/perl\"" > $@ - $(PERL) $(PERLLIB)/ExtUtils/xsubpp -typemap \ - $(PERLLIB)/ExtUtils/typemap $(srcdir)/perl_api/perl.xs >> $@ - ($(PERL) -ne 'print "sub $$1 {\$$curscr->$$1(\@_)}\n" \ - if /newXS\("VI::([^":]*)"/;' $@ ; echo "1;") > VI.pm -perl.o: perl.c - $(CC) $(CFLAGS) $? -perlsfio.o: $(srcdir)/perl_api/perlsfio.c - $(CC) $(CFLAGS) $? -tcl.o: $(srcdir)/tcl_api/tcl.c - $(CC) $(CFLAGS) $? - -# Vi sources. -cut.o: $(srcdir)/common/cut.c - $(CC) $(CFLAGS) $? -delete.o: $(srcdir)/common/delete.c - $(CC) $(CFLAGS) $? -exf.o: $(srcdir)/common/exf.c - $(CC) $(CFLAGS) $? -key.o: $(srcdir)/common/key.c - $(CC) $(CFLAGS) $? -line.o: $(srcdir)/common/line.c - $(CC) $(CFLAGS) $? -log.o: $(srcdir)/common/log.c - $(CC) $(CFLAGS) $? -main.o: $(srcdir)/common/main.c - $(CC) $(CFLAGS) $? -mark.o: $(srcdir)/common/mark.c - $(CC) $(CFLAGS) $? -msg.o: $(srcdir)/common/msg.c - $(CC) $(CFLAGS) $? -options.o: $(srcdir)/common/options.c - $(CC) $(CFLAGS) $? -options_f.o: $(srcdir)/common/options_f.c - $(CC) $(CFLAGS) $? -put.o: $(srcdir)/common/put.c - $(CC) $(CFLAGS) $? -screen.o: $(srcdir)/common/screen.c - $(CC) $(CFLAGS) $? -search.o: $(srcdir)/common/search.c - $(CC) $(CFLAGS) $? -seq.o: $(srcdir)/common/seq.c - $(CC) $(CFLAGS) $? -recover.o: $(srcdir)/common/recover.c - $(CC) $(CFLAGS) $? -util.o: $(srcdir)/common/util.c - $(CC) $(CFLAGS) $? -ex.o: $(srcdir)/ex/ex.c - $(CC) $(CFLAGS) $? -ex_abbrev.o: $(srcdir)/ex/ex_abbrev.c - $(CC) $(CFLAGS) $? -ex_append.o: $(srcdir)/ex/ex_append.c - $(CC) $(CFLAGS) $? -ex_args.o: $(srcdir)/ex/ex_args.c - $(CC) $(CFLAGS) $? -ex_argv.o: $(srcdir)/ex/ex_argv.c - $(CC) $(CFLAGS) $? -ex_at.o: $(srcdir)/ex/ex_at.c - $(CC) $(CFLAGS) $? -ex_bang.o: $(srcdir)/ex/ex_bang.c - $(CC) $(CFLAGS) $? -ex_cd.o: $(srcdir)/ex/ex_cd.c - $(CC) $(CFLAGS) $? -ex_cmd.o: $(srcdir)/ex/ex_cmd.c - $(CC) $(CFLAGS) $? -ex_cscope.o: $(srcdir)/ex/ex_cscope.c - $(CC) $(CFLAGS) $? -ex_delete.o: $(srcdir)/ex/ex_delete.c - $(CC) $(CFLAGS) $? -ex_digraph.o: $(srcdir)/ex/ex_digraph.c - $(CC) $(CFLAGS) $? -ex_display.o: $(srcdir)/ex/ex_display.c - $(CC) $(CFLAGS) $? -ex_edit.o: $(srcdir)/ex/ex_edit.c - $(CC) $(CFLAGS) $? -ex_equal.o: $(srcdir)/ex/ex_equal.c - $(CC) $(CFLAGS) $? -ex_file.o: $(srcdir)/ex/ex_file.c - $(CC) $(CFLAGS) $? -ex_filter.o: $(srcdir)/ex/ex_filter.c - $(CC) $(CFLAGS) $? -ex_global.o: $(srcdir)/ex/ex_global.c - $(CC) $(CFLAGS) $? -ex_init.o: $(srcdir)/ex/ex_init.c - $(CC) $(CFLAGS) $? -ex_join.o: $(srcdir)/ex/ex_join.c - $(CC) $(CFLAGS) $? -ex_map.o: $(srcdir)/ex/ex_map.c - $(CC) $(CFLAGS) $? -ex_mark.o: $(srcdir)/ex/ex_mark.c - $(CC) $(CFLAGS) $? -ex_mkexrc.o: $(srcdir)/ex/ex_mkexrc.c - $(CC) $(CFLAGS) $? -ex_move.o: $(srcdir)/ex/ex_move.c - $(CC) $(CFLAGS) $? -ex_open.o: $(srcdir)/ex/ex_open.c - $(CC) $(CFLAGS) $? -ex_perl.o: $(srcdir)/ex/ex_perl.c - $(CC) $(CFLAGS) $? -ex_preserve.o: $(srcdir)/ex/ex_preserve.c - $(CC) $(CFLAGS) $? -ex_print.o: $(srcdir)/ex/ex_print.c - $(CC) $(CFLAGS) $? -ex_put.o: $(srcdir)/ex/ex_put.c - $(CC) $(CFLAGS) $? -ex_quit.o: $(srcdir)/ex/ex_quit.c - $(CC) $(CFLAGS) $? -ex_read.o: $(srcdir)/ex/ex_read.c - $(CC) $(CFLAGS) $? -ex_screen.o: $(srcdir)/ex/ex_screen.c - $(CC) $(CFLAGS) $? -ex_script.o: $(srcdir)/ex/ex_script.c - $(CC) $(CFLAGS) $? -ex_set.o: $(srcdir)/ex/ex_set.c - $(CC) $(CFLAGS) $? -ex_shell.o: $(srcdir)/ex/ex_shell.c - $(CC) $(CFLAGS) $? -ex_shift.o: $(srcdir)/ex/ex_shift.c - $(CC) $(CFLAGS) $? -ex_source.o: $(srcdir)/ex/ex_source.c - $(CC) $(CFLAGS) $? -ex_stop.o: $(srcdir)/ex/ex_stop.c - $(CC) $(CFLAGS) $? -ex_subst.o: $(srcdir)/ex/ex_subst.c - $(CC) $(CFLAGS) $? -ex_tag.o: $(srcdir)/ex/ex_tag.c - $(CC) $(CFLAGS) $? -ex_tcl.o: $(srcdir)/ex/ex_tcl.c - $(CC) $(CFLAGS) $? -ex_txt.o: $(srcdir)/ex/ex_txt.c - $(CC) $(CFLAGS) $? -ex_undo.o: $(srcdir)/ex/ex_undo.c - $(CC) $(CFLAGS) $? -ex_usage.o: $(srcdir)/ex/ex_usage.c - $(CC) $(CFLAGS) $? -ex_util.o: $(srcdir)/ex/ex_util.c - $(CC) $(CFLAGS) $? -ex_version.o: $(srcdir)/ex/ex_version.c - $(CC) $(CFLAGS) $? -ex_visual.o: $(srcdir)/ex/ex_visual.c - $(CC) $(CFLAGS) $? -ex_write.o: $(srcdir)/ex/ex_write.c - $(CC) $(CFLAGS) $? -ex_yank.o: $(srcdir)/ex/ex_yank.c - $(CC) $(CFLAGS) $? -ex_z.o: $(srcdir)/ex/ex_z.c - $(CC) $(CFLAGS) $? -getc.o: $(srcdir)/vi/getc.c - $(CC) $(CFLAGS) $? -v_at.o: $(srcdir)/vi/v_at.c - $(CC) $(CFLAGS) $? -v_ch.o: $(srcdir)/vi/v_ch.c - $(CC) $(CFLAGS) $? -v_cmd.o: $(srcdir)/vi/v_cmd.c - $(CC) $(CFLAGS) $? -v_delete.o: $(srcdir)/vi/v_delete.c - $(CC) $(CFLAGS) $? -v_ex.o: $(srcdir)/vi/v_ex.c - $(CC) $(CFLAGS) $? -v_increment.o: $(srcdir)/vi/v_increment.c - $(CC) $(CFLAGS) $? -v_init.o: $(srcdir)/vi/v_init.c - $(CC) $(CFLAGS) $? -v_itxt.o: $(srcdir)/vi/v_itxt.c - $(CC) $(CFLAGS) $? -v_left.o: $(srcdir)/vi/v_left.c - $(CC) $(CFLAGS) $? -v_mark.o: $(srcdir)/vi/v_mark.c - $(CC) $(CFLAGS) $? -v_match.o: $(srcdir)/vi/v_match.c - $(CC) $(CFLAGS) $? -v_paragraph.o: $(srcdir)/vi/v_paragraph.c - $(CC) $(CFLAGS) $? -v_put.o: $(srcdir)/vi/v_put.c - $(CC) $(CFLAGS) $? -v_redraw.o: $(srcdir)/vi/v_redraw.c - $(CC) $(CFLAGS) $? -v_replace.o: $(srcdir)/vi/v_replace.c - $(CC) $(CFLAGS) $? -v_right.o: $(srcdir)/vi/v_right.c - $(CC) $(CFLAGS) $? -v_screen.o: $(srcdir)/vi/v_screen.c - $(CC) $(CFLAGS) $? -v_scroll.o: $(srcdir)/vi/v_scroll.c - $(CC) $(CFLAGS) $? -v_search.o: $(srcdir)/vi/v_search.c - $(CC) $(CFLAGS) $? -v_section.o: $(srcdir)/vi/v_section.c - $(CC) $(CFLAGS) $? -v_sentence.o: $(srcdir)/vi/v_sentence.c - $(CC) $(CFLAGS) $? -v_status.o: $(srcdir)/vi/v_status.c - $(CC) $(CFLAGS) $? -v_txt.o: $(srcdir)/vi/v_txt.c - $(CC) -c @no_op_OPTFLAG@ @CFLAGS@ -I. -I$(srcdir)/include @CPPFLAGS@ $? -v_ulcase.o: $(srcdir)/vi/v_ulcase.c - $(CC) $(CFLAGS) $? -v_undo.o: $(srcdir)/vi/v_undo.c - $(CC) $(CFLAGS) $? -v_util.o: $(srcdir)/vi/v_util.c - $(CC) $(CFLAGS) $? -v_word.o: $(srcdir)/vi/v_word.c - $(CC) $(CFLAGS) $? -v_xchar.o: $(srcdir)/vi/v_xchar.c - $(CC) $(CFLAGS) $? -v_yank.o: $(srcdir)/vi/v_yank.c - $(CC) $(CFLAGS) $? -v_z.o: $(srcdir)/vi/v_z.c - $(CC) $(CFLAGS) $? -v_zexit.o: $(srcdir)/vi/v_zexit.c - $(CC) $(CFLAGS) $? -vi.o: $(srcdir)/vi/vi.c - $(CC) $(CFLAGS) $? -vs_line.o: $(srcdir)/vi/vs_line.c - $(CC) $(CFLAGS) $? -vs_msg.o: $(srcdir)/vi/vs_msg.c - $(CC) $(CFLAGS) $? -vs_refresh.o: $(srcdir)/vi/vs_refresh.c - $(CC) $(CFLAGS) $? -vs_relative.o: $(srcdir)/vi/vs_relative.c - $(CC) $(CFLAGS) $? -vs_smap.o: $(srcdir)/vi/vs_smap.c - $(CC) $(CFLAGS) $? -vs_split.o: $(srcdir)/vi/vs_split.c - $(CC) $(CFLAGS) $? - -addbytes.o: $(srcdir)/curses/addbytes.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -addch.o: $(srcdir)/curses/addch.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -box.o: $(srcdir)/curses/box.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -clear.o: $(srcdir)/curses/clear.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -clrtobot.o: $(srcdir)/curses/clrtobot.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -clrtoeol.o: $(srcdir)/curses/clrtoeol.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -cr_put.o: $(srcdir)/curses/cr_put.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -ctrace.o: $(srcdir)/curses/ctrace.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -cur_hash.o: $(srcdir)/curses/cur_hash.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -curses.o: $(srcdir)/curses/curses.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -delch.o: $(srcdir)/curses/delch.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -deleteln.o: $(srcdir)/curses/deleteln.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -delwin.o: $(srcdir)/curses/delwin.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -erase.o: $(srcdir)/curses/erase.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -fullname.o: $(srcdir)/curses/fullname.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -getch.o: $(srcdir)/curses/getch.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -getstr.o: $(srcdir)/curses/getstr.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -id_subwins.o: $(srcdir)/curses/id_subwins.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -idlok.o: $(srcdir)/curses/idlok.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -initscr.o: $(srcdir)/curses/initscr.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -insch.o: $(srcdir)/curses/insch.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -insertln.o: $(srcdir)/curses/insertln.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -longname.o: $(srcdir)/curses/longname.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -move.o: $(srcdir)/curses/move.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -mvwin.o: $(srcdir)/curses/mvwin.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -newwin.o: $(srcdir)/curses/newwin.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -overlay.o: $(srcdir)/curses/overlay.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -overwrite.o: $(srcdir)/curses/overwrite.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -putchar.o: $(srcdir)/curses/putchar.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -refresh.o: $(srcdir)/curses/refresh.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -scroll.o: $(srcdir)/curses/scroll.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -setterm.o: $(srcdir)/curses/setterm.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -standout.o: $(srcdir)/curses/standout.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -toucholap.o: $(srcdir)/curses/toucholap.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -touchwin.o: $(srcdir)/curses/touchwin.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -tscroll.o: $(srcdir)/curses/tscroll.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -tstp.o: $(srcdir)/curses/tstp.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -tty.o: $(srcdir)/curses/tty.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -unctrl.o: $(srcdir)/curses/unctrl.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? -waddnstr.o: $(srcdir)/curses/waddnstr.c - $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? - -# DB sources. -db.o: $(srcdir)/db/db/db.c - $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) $? -mpool.o: $(srcdir)/db/mpool/mpool.c - $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/mpool $? -bt_close.o: $(srcdir)/db/btree/bt_close.c - $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/btree $? -bt_conv.o: $(srcdir)/db/btree/bt_conv.c - $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/btree $? -bt_debug.o: $(srcdir)/db/btree/bt_debug.c - $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/btree $? -bt_delete.o: $(srcdir)/db/btree/bt_delete.c - $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/btree $? -bt_get.o: $(srcdir)/db/btree/bt_get.c - $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/btree $? -bt_open.o: $(srcdir)/db/btree/bt_open.c - $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/btree $? -bt_overflow.o: $(srcdir)/db/btree/bt_overflow.c - $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/btree $? -bt_page.o: $(srcdir)/db/btree/bt_page.c - $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/btree $? -bt_put.o: $(srcdir)/db/btree/bt_put.c - $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/btree $? -bt_search.o: $(srcdir)/db/btree/bt_search.c - $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/btree $? -bt_seq.o: $(srcdir)/db/btree/bt_seq.c - $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/btree $? -bt_split.o: $(srcdir)/db/btree/bt_split.c - $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/btree $? -bt_utils.o: $(srcdir)/db/btree/bt_utils.c - $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/btree $? -rec_close.o: $(srcdir)/db/recno/rec_close.c - $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/recno $? -rec_delete.o: $(srcdir)/db/recno/rec_delete.c - $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/recno $? -rec_get.o: $(srcdir)/db/recno/rec_get.c - $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/recno $? -rec_open.o: $(srcdir)/db/recno/rec_open.c - $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/recno $? -rec_put.o: $(srcdir)/db/recno/rec_put.c - $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/recno $? -rec_search.o: $(srcdir)/db/recno/rec_search.c - $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/recno $? -rec_seq.o: $(srcdir)/db/recno/rec_seq.c - $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/recno $? -rec_utils.o: $(srcdir)/db/recno/rec_utils.c - $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/recno $? - -# Regular Expressions sources. -regcomp.o: $(srcdir)/regex/regcomp.c - $(CC) -D__REGEX_PRIVATE $(CFLAGS) $? -regerror.o: $(srcdir)/regex/regerror.c - $(CC) -D__REGEX_PRIVATE $(CFLAGS) $? -regexec.o: $(srcdir)/regex/regexec.c - $(CC) -D__REGEX_PRIVATE $(CFLAGS) $? -regfree.o: $(srcdir)/regex/regfree.c - $(CC) -D__REGEX_PRIVATE $(CFLAGS) $? - -# Random replacement and workaround sources. -addnstr.o: $(srcdir)/clib/addnstr.c - $(CC) $(CFLAGS) $? -bsearch.o: $(srcdir)/clib/bsearch.c - $(CC) $(CFLAGS) $? -env.o: $(srcdir)/clib/env.c - $(CC) $(CFLAGS) $? -fchmod.o: $(srcdir)/clib/fchmod.c - $(CC) $(CFLAGS) $(INC) $? -gethostname.o: $(srcdir)/clib/gethostname.c - $(CC) $(CFLAGS) $(INC) $? -getopt.o: $(srcdir)/clib/getopt.c - $(CC) $(CFLAGS) $(INC) $? -memchr.o: $(srcdir)/clib/memchr.c - $(CC) $(CFLAGS) $? -memcpy.o: $(srcdir)/clib/memmove.c - $(cp) $? memcpy.c - $(CC) $(CFLAGS) -DMEMCOPY memcpy.c -memmove.o: $(srcdir)/clib/memmove.c - $(CC) $(CFLAGS) -DMEMMOVE $? -memset.o: $(srcdir)/clib/memset.c - $(CC) $(CFLAGS) $? -mkstemp.o: $(srcdir)/clib/mkstemp.c - $(CC) $(CFLAGS) $? -mmap.o: $(srcdir)/clib/mmap.c - $(CC) $(CFLAGS) $? -realloc.o: $(srcdir)/clib/realloc.c - $(CC) $(CFLAGS) $? -snprintf.o: $(srcdir)/clib/snprintf.c - $(CC) $(CFLAGS) $? -strdup.o: $(srcdir)/clib/strdup.c - $(CC) $(CFLAGS) $? -strerror.o: $(srcdir)/clib/strerror.c - $(CC) $(CFLAGS) $? -strpbrk.o: $(srcdir)/clib/strpbrk.c - $(CC) $(CFLAGS) $? -strsep.o: $(srcdir)/clib/strsep.c - $(CC) $(CFLAGS) $? -strtol.o: $(srcdir)/clib/strtol.c - $(CC) $(CFLAGS) $? -strtoul.o: $(srcdir)/clib/strtoul.c - $(CC) $(CFLAGS) $? -vsnprintf.o: $(srcdir)/clib/vsnprintf.c - $(CC) $(CFLAGS) $? diff --git a/build/README b/build/README deleted file mode 100644 index efbce2b9dfbb..000000000000 --- a/build/README +++ /dev/null @@ -1,369 +0,0 @@ -# @(#)README 8.26 (Berkeley) 10/19/96 - -Nvi uses the GNU autoconf program for configuration and compilation. You -should enter: - - configure - make - -and nvi will configure the system and build one or two binaries: nvi and -tknvi. You can use any path to the configure script, e.g., to build for -an x86 architecture, I suggest that you do: - - mkdir build.x86 - cd build.x86 - ../build/configure - make - -There are options that you can specify to the configure command. See -the next section for a description of these options. - -If you want to rebuild or reconfigure nvi, for example, because you change -your mind as to the curses library that you want to use, create a new -directory and reconfigure it using "configure" and whatever options you -choose, don't try to selectively edit the files. - -By default, nvi is installed as "vi", with hard links to "ex" and "view". -To install them using different names, use the configure program options. -For example, to install them as "nvi", "nex" and "nview", use: - - configure --program-prefix=n - -See the section below on installation for details. - -Note, if you're building nvi on a LynxOS system, you should read the -README.LynxOS file in this directory for additional build instructions -that are specific to that operating system. - -If you have trouble with this procedure, send email to the addresses -listed in ../README. In that email, please provide a complete script -of the output for all of the above commands that you entered. - -=-=-=-=-=-=-= -NVI'S OPTIONS TO THE CONFIGURE PROGRAM -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= - -There are many options that you can enter to the configuration program. -To see a complete list of the options, enter "configure --help". Only -a few of them are nvi specific. These options are as follows: - - --disable-curses DON'T use the nvi-provided curses routines. - --disable-db DON'T use the nvi-provided DB routines. - --disable-re DON'T use the nvi-provided RE routines. - --enable-debug Build a debugging version. - --enable-perlinterp Include a Perl interpreter in vi. - --enable-tclinterp Include a Tk/Tcl interpreter in vi. - --enable-tknvi Build a Tk/Tcl front-end for vi. - -disable-curses: - By default, nvi loads its own implementation of the curses - routines (which are a stripped-down version of the 4.4BSD curses - library). If you have your own curses library implementation and - you want to use it instead, enter: - - --disable-curses - - as an argument to configure, and the curses routines will be taken - from whatever libraries you load. Note: System V based curses - implementations are usually broken. See the last section of this - README for further information about nvi and the curses library. - -disable-db: - By default, nvi loads its own versions of the Berkeley DB routines - (which are a stripped-down version of DB 1.85). If you have your - own version of the Berkeley DB routines and you want to use them - instead, enter: - - --disable-db - - as an argument to configure, and the DB routines will be taken - from whatever libraries you load. Make sure that the DB routines - you use are at least version 1.85 or later. - -disable-re: - By default, nvi loads its own versions of the POSIX 1003.2 Regular - Expression routines (which are Henry Spencer's implementation). - If your C library contains an implementation of the POSIX 1003.2 - RE routines (note, this is NOT the same as the historic UNIX RE - routines), and you want to use them instead, enter: - - --disable-re - - as an argument to configure, and the RE routines will be taken - from whatever libraries you load. Please ensure that your RE - routines implement Henry Spencer's extensions for doing vi-style - "word" searches. - -enable-debug: - If you want to build nvi with no optimization (i.e. without -O - as a compiler flag), with -g as a compiler flag, and with DEBUG - defined during compilation, enter: - - --enable-debug - - as an argument to configure. - -enable-perlinterp: - If you have the Perl 5 libraries and you want to compile in the - Perl interpreter, enter: - - --enable-perlinterp - - as an argument to configure. (Note: this is NOT possible with - Perl 4, or even with Perl 5 versions earlier than 5.002.) - -enable-tclinterp: - If you have the Tk/Tcl libraries and you want to compile in the - Tcl/Tk interpreter, enter: - - --enable-tclinterp - - as an argument to configure. If your Tk/Tcl include files and - libraries aren't in the standard library and include locations, - see the next section of this README file for more information. - -enable-tknvi: - If you have the Tk/Tcl libraries and you want to build the Tcl/Tk - nvi front-end, enter: - - --enable-tknvi - - as an argument to configure. If your Tk/Tcl include files and - libraries aren't in the standard library and include locations, - see the next section of this README file for more information. - -=-=-=-=-=-=-= -ADDING OR CHANGING COMPILERS, OR COMPILE OR LOAD LINE FLAGS -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= - -If you want to use a specific compiler, specify the CC environment -variable before running configure. For example: - - env CC=gcc configure - -Using anything other than the native compiler will almost certainly -mean that you'll want to check the compile and load line flags, too. - -If you want to specify additional load line flags, specify the ADDLDFLAGS -environment variable before running configure. For example: - - env ADDLDFLAGS="-Q" configure - -would specify the -Q flag in the load line when the nvi programs are -loaded. - -If you don't want configure to use the default load line flags for the -system, specify the LDFLAGS environment variable before running configure. -For example: - - env LDFLAGS="-32" configure - -will cause configure to set the load line flags to "-32", and not set -them based on the current system. - -If you want to specify additional compile line flags, specify the -ADDCPPFLAGS environment variable before running configure. For example: - - env ADDCPPFLAGS="-I../foo" configure - -would cause the compiler to be passed the -I../foo flag when compiling -test programs during configuration as well as when building nvi object -files. - -If you don't want configure to use the default compile line flags for the -system, specify the CPPFLAGS environment variable before running configure. -For example: - - env CPPFLAGS="-I.." configure - -will cause configure to use "-I.." as the compile line flags instead of -the default values. - -=-=-=-=-=-=-= -ADDING LIBRARIES AND INCLUDE FILES -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= - -If the Tk/Tcl or any other include files or libraries are in non-standard -places on your system, you will need to specify the directory path where -they can be found. - -If you want to specify additional library paths, set the ADDLIBS environment -variable before running configure. For example: - - env ADDLIBS="-L/a/b -L/e/f -ldb" configure - -would specify two additional directories to search for libraries, /a/b -and /e/f, and one additional library to load, "db". - -If you want to specify additional include paths, specify the ADDCPPFLAGS -environment variable before running configure. For example: - - env ADDCPPFLAGS="-I/usr/local/include" LIBS="-ldb" configure - -would search /usr/local/include for include files, as well as load the db -library as described above. - -As a final example, let's say that you've downloaded ncurses from the net -and you've built it in a directory named ncurses which is at the same -level in the filesystem hierarchy as nvi. You would enter something like: - - env ADDCPPFLAGS="-I../../ncurses/include" \ - ADDLIBS="-L../../ncurses/libraries" configure - -to cause nvi to look for the curses include files and the curses library -in the ncurses environment. - -Notes: - Make sure that you prepend -L to any library directory names, and - that you prepend -I to any include file directory names! Also, - make sure that you quote the paths as shown above, i.e. with - single or double quotes around the values you're specifying for - ADDCPPFLAGS and ADDLIBS. - - =-=-=-=-=-= - You should NOT need to add any libraries or include files to load - the Perl5 interpreter. The configure script will obtain that - information directly from the Perl5 program. This means that the - configure script must be able to find perl in its path. It looks - for "perl5" first, and then "perl". If you're building a Perl - interpreter and neither is found, it's a fatal error. - - =-=-=-=-=-= - You do not need to specify additional libraries to load Tk/Tcl, - Perl or curses, as the nvi configuration script adds the - appropriate libraries to the load line whenever you specify - --enable-tknvi or other Perl or Tk/Tcl related option, or build - the Tk/Tcl or curses version of nvi. The library names that are - automatically loaded are as follows: - - for Perl: -lperl - for Tk/Tcl: -ltk -ltcl -lm - for curses: -lcurses - - In addition, the configure script loads: - - ... the X libraries when loading the Tk/Tcl libraries, - if they exist. - - ... the -ltermcap or -ltermlib libraries when loading - any curses library, if they exist. - - =-=-=-=-=-= - The env command is available on most systems, and simply sets one - or more environment variables before running a command. If the - env command is not available to you, you can set the environment - variables in your shell before running configure. For example, - in sh or ksh, you could do: - - ADDLIBS="-L/a/b -L/e/f -ldb" configure - - and in csh or tcsh, you could do: - - setenv ADDLIBS "-L/a/b -L/e/f -ldb" - configure - - See your shell manual page for further information. - -=-=-=-=-=-=-= -INSTALLING NVI -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= - -Nvi installs the following files into the following locations, with -the following default values: - -Variables: Default value: -prefix /usr/local -exec_prefix $(prefix) -bindir $(prefix)/bin -datadir $(prefix)/share -mandir $(prefix)/man - -File(s): Default location ----------------------------------------- -vi $(bindir)/vi -vi.1 $(mandir)/man1/vi.1 -vi.0 $(mandir)/cat1/vi.0 -Perl scripts $(datadir)/vi/perl/ -Tcl scripts $(datadir)/vi/tcl/ -Message Catalogs $(datadir)/vi/catalog/ - -Notes: - There are two hard links to the vi program, named ex and view. - Similarly, there are two hard links to the unformatted vi manual - page, named ex.1 and view.1, and two hard links to the formatted - manual page, named ex.0 and view.0. These links are created when - the program and man pages are installed. - - If you want to install vi, ex, view and the man pages as nvi, nex, - nview, use the configure option --program-prefix=n. Other, more - complex transformations are possible -- use configure --help to - see more options. - - To move the entire installation tree somewhere besides /usr/local, - change the value of both "exec_prefix" and "prefix". To move the - binaries to a different place, change the value of "bindir". - Similarly, to put the datafiles (the message catalogs, Perl and - Tcl scripts) or the man pages in a different place, change the - value of "datadir" or "mandir". These values can be changed as - part of configuration: - - configure --exec_prefix=/usr/contrib --prefix=/usr/share - - or when doing the install itself: - - make exec_prefix=/usr/contrib prefix=/usr/contrib install - - The datafile directory (e.g., /usr/local/share/vi by default) is - completely removed and then recreated as part of the installation - process. - -=-=-=-=-=-=-= -NVI AND THE CURSES LIBRARY -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= - -The major portability problem for nvi is selecting a curses library. -Unfortunately, it is common to find broken versions of curses -- the -original System V curses was broken, resulting in all vendors whose -implementations are derived from System V having broken implementations -in turn. - -For this reason, BY DEFAULT, nvi uses the stripped-down curses library -that's included in its distribution. Of course, it would be preferable -to use the vendor's curses library, or one of the newer implementations -of curses, e.g., ncurses. - -To use the vendor's curses library, specify the: - - --disable-curses - -argument to the configure command. If you use the vendor's or other -curses library, and you see any of the following symptoms: - - + Core dumps in curses routines. - + Missing routines when compiling. - + Repainting the wrong characters on the screen. - + Displaying inverse video in the wrong places. - + Failure to reset your terminal to the correct modes on exit. - -you have a broken curses implementation, and you should reconfigure nvi -to use another curses library or the curses library provided with nvi. - -There are two alternative sources for curses libraries: - -#1: Compile the 4BSD curses library from any of the recent BSD - releases: FreeBSD, NetBSD or 4.4BSD-Lite release 2. These - libraries should be able to support nvi. - -#2: Retrieve and build the ncurses library. This library is not - recommended unreservedly, at least for now, for two reasons. - First, it can't be built on any system where the compiler - doesn't support function prototypes. Second, it currently has - a few bugs in its support for nvi. It mostly works, but it's - still not quite right. - -One final note. If you see the following symptoms: - - + Line-by-line screen repainting instead of scrolling. - -it usually means that your termcap or terminfo information is insufficient -for the terminal. diff --git a/build/README.LynxOS b/build/README.LynxOS deleted file mode 100644 index 2cc68dafc861..000000000000 --- a/build/README.LynxOS +++ /dev/null @@ -1,320 +0,0 @@ -README.LynxOS -============= - -Written by Ronald F. Guilmette <rfg@monkeys.com> - -Last modified Wed Aug 14 23:10:07 PDT 1996 ------------------------------------------- - -0. Introduction ---------------- - -This file describes how to build and install the Berkeley nvi editor for -the LynxOS 2.4.0 operating system. - -LynxOS 2.4.0 is available for a variety of different hardware platforms, in -particular, x86, m680x0, Sparc, and PowerPC. I have successfully built nvi -on all four of these flavors of LynxOS by following the procedures given in -this file. - -Note that these procedures may not work on versions of LynxOS prior to 2.4.0. -(As I understand it, a good deal of work went into making the 2.4.0 release -more POSIX-compliant, and I have no idea what build glitches, if any, you -might encounter if you try to build nvi on a pre-2.4.0 version of LynxOS.) - -There are basically four steps to configuring, building, and installing nvi -on LynxOS, namely: - - 1. Get setup to use the proper C compiler. - 2. Replace your installed `tr' program. - 3. Fix your system include files. - 4. Do a normal configure, build, and install of nvi. - -These steps are described in separate sections below. - -1. Get Setup to Use the Proper C Compiler ------------------------------------------- - -The first step when building nvi on LynxOS is to set your $PATH environment -variable properly so that the gcc 2.x compiler appears first on your path, -prior to the older (and less robust) gcc 1.xx compiler (typically installed -as /bin/gcc) and/or the old Lynx proprietary C compiler (typically installed -as /bin/cc), both of which may also be present on your system. - -Note that for most operating systems, the configure script for nvi tries -to use whatever compiler you have installed (and in your $PATH) as "cc", -however in the special case of LynxOS, the configure script will auto- -matically try to find a "gcc" program on your $PATH in preference to a -compiler called "cc". If the nvi configure script only find a compiler -called "cc", that's OK. It will still try to see if that is really just -the GNU C compiler installed under the name "cc". - -Regardless of the name however (be it "gcc" or "cc") the first C compiler -in your $PATH should be some _recent_ (i.e. 2.0 or later) version of the -GNU C compiler... and the nvi configure script now checks that this is the -case, and fails if it isn't. - -Oddly enough, LynxOS 2.4.0 (and some prior versions) shipped with as many -as three different C compilers installed, so it is important to set your -$PATH environment variable carfully in order to get the proper C compiler -to appear first in your $PATH. You want to avoid having either the /bin/gcc -compiler or the /bin/cc compiler be the first C compiler in your $PATH. - -To make sure that the GNU C version 2.x compiler which was shipped with your -LynxOS system appears first on your path, you will need to either set your -$PATH variable (for sh/bash/ksh users) or your $path variable (for csh/tcsh -users). You can, of course, just do this at the shell command prompt, but -it is probably better to actually edit this change into your .profile file -(for sh/bash/ksh users) or into your .cshrc file (for csh/tcsh users). - -The pathname of the directory that contains the GNU C version 2.x compiler -is (unfortunately) dependent upon the exact type of LynxOS system you have. - -For LynxOS 2.4.0 on x86 systems, gcc 2.x is located in: - - /cygnus/94q4-lynxos-x86/bin - -For LynxOS 2.4.0 on m680x0 systems, gcc 2.x is located in: - - /cygnus/94q4-lynxos-68k/bin - -For LynxOS 2.4.0 on Sparc systems, gcc 2.x is located in: - - /cygnus/94q4-lynxos-usparc/bin - -For LynxOS 2.4.0 on PowerPC systems, gcc 2.x is located in: - - /cygnus/95q2-lynxos-ppc/bin - -(Note also that these locations may change in LynxOS 2.5.x and beyond.) - -Anyway, it is imperative that you setup your $PATH environment variable -(*before* you do the configure step for nvi) so that the GNU C version 2.x -compiler appears in your $PATH before either the /bin/cc or /bin/gcc -compilers (if present). If you fail to do this, the configure step for -nvi will fail, because the compiler script actually checks (now) that the -compiler you are using (if your are on a LynxOS system) is gcc 2.0 or -later. - -To make absolutely sure that you will be configuring and building nvi with -the proper C compiler (i.e. the GNU C version 2.x compiler on your system) -you should add the directory name listed above for your specific system type -to your $PATH setting in your $HOME/.profile file. (For csh/tcsh users, you -will instead want to add the relevant directory name to the setting of your -$path variable in your ~/.cshrc file.) Once you have added the proper direc- -tory name (from the list given above) to your $HOME/.profile file (or to your -~/.cshrc file, if you are using csh or tcsh) you should log out completely -and then log back into the system just to make sure your new $PATH/$path -setting takes effect properly. - -When you finish making this adjustment to your $PATH (or $path), the most -up-to-date version of gcc on your system should be available to you as the -first `gcc' program on your $PATH. You should verify that this is indeed the -case simply by typing `gcc -v' and then checking the version number reported -by the compiler. It should say either "2.6-94q4" or (on PowerPC systems) it -should say "2.6-95q2". If you don't get these results, try again to set your -$PATH (or $path) until you do. You won't be able to build nvi until you are -properly setup to use gcc version 2.0 or later. - -Performing the steps shown above will insure that your subsequent configura- -tion and build steps for nvi will make use of the most up-to-date version of -gcc that was shipped with your Lynx operating system. (Note that the versions -of gcc which are currently shipping with LynxOS 2.4.0 are also somewhat out- -of-date themselves, but they are still quite a bit newer and more bug-free -and ANSI conformant that those other two C compilers, /bin/cc and /bin/gcc, -which also ship with LynxOS 2.4.0.) - -(Note: At present, LynxOS version 2.4.0 is the latest officially released -version of LynxOS, and all of the above information is accurate and correct -for LynxOS 2.4.0 as of the time of this writing. However it is rumored that -future releases of LynxOS may provide a still newer version of gcc, and that -it may be located in the /usr/bin directory. Thus, if you are building nvi -for some LynxOS version later than 2.4.0, you may wish to check and see if -your system has a program called /usr/bin/gcc, and use that version of gcc, -if available, rather than the one suggested above.) - -2. Replace Your Installed `tr' Program ---------------------------------------- - -The `tr' program which comes bundled with LynxOS 2.4.0 (as /bin/tr) has a -somewhat obscure bug which just happens to be tickled by almost all GNU -`autoconf' generated `configure' scripts (including the one that nowadays -comes bundled with nvi). Using the stock /bin/tr program on LynxOS when -executing such `configure' scripts _will_ cause these scripts to malfunction -in various ways. It is therefore imperative that you replace your LynxOS -/bin/tr program with a properly working version of the `tr' command _before_ -you even try to configure nvi. (You can tell if your `tr' program has the -bug by executng the command "echo ab- | tr ab- ABC". If this yields the -string "Ab-" then you have the bug. If it yields "ABC" then you don't.) - -You can obtain sources for a working version of the `tr' command as part of -the GNU `textutils' package (the latest version of which, at the time of this -writing, is 1.19). The GNU textutils package is available for downloading -from prep.ai.mit.edu in the pub/gnu directory. Look for the file named -textutils-1.19.tar.gz, or an even more recent version of textutils, if one -is available. Fetch it, gunzip it, untar it, and follow the directions in -the INSTALL file included in the tar file to build and install the entire -textutils set of utility programs (which includes a working `tr' program). -Then just make sure that the GNU version of `tr' appears on your $PATH -_before_ the LynxOS version of `tr' (i.e. /bin/tr). Be sure to do this -step _before_ you start to configure nvi. - -When building the textutils set of programs, I suggest that you use the most -up-to-date C compiler available on your system (as described above). Also, -note that it will be important for you to AVOID using the -O (optimize) -compiler option when building the GNU textutils package, even if you are -using the most up-to-date version of gcc which shipped with your system. -If you try to use -O when building the textutils package on an x86 with -the Cygnus 94q4 C compiler, you will end up with a `tr' program which will -malfunction even worse than the one you are trying to replace! If you use --O when building the textutils package on LynxOS on the PowerPC (using the -Cygnus 95q2 C compiler) you will just get yourself a compiler crash. So -just don't use -O when building textutils. You can avoid using -O by in- -voking make in the textutils directory as follows: - - make CFLAGS="-g" - -(Note: At present, LynxOS version 2.4.0 is the latest officially released -version of LynxOS, and all of the above information is accurate and correct -for LynxOS 2.4.0 as of the time of this writing. However it is rumored that -the bug in the /bin/tr program will be fixed in future releases of LynxOS, -so if you have a version of LynxOS later than 2.4.0, you may wish to check -and see if your /bin/tr program even has the problematic bug before bothering -with all of this.) - - -3. Fix Your System Include Files ---------------------------------- - -If you are building nvi on a PowerPC system, it is also important that you -apply the patches given at the end of this file to your /usr/include files. -(Note that you will have to be root in order to do this.) Two of the patches -included below fix a pair of serious bugs in the /usr/include/stdarg.h file -on the PowerPC, and you really _do_ want to have these bugs fixed anyway, -because without these fixes, anything that you compile which uses <stdarg.h> -will very likely malfunction at run-time. - -Regardless of which LynxOS platform you are using (i.e. x86, PowerPC, Sparc, -or m680x0) you may want to apply all of the system include files patches that -are included below anyway. Doing so will clean up a few minor problems with -the relevant system include files (i.e. <stdarg.h>, <ioctl.h>, and <wait.h>) -and this step will also prevent a few warnings which you would otherwise get -during the build of nvi. - -You can apply all of the patches given at the end of this file simply by -doing the following: - - su root - cd /usr/include - /bin/patch < this-file - -Where `this-file' is the actual full pathname of the file you are now reading, -wherever it may reside on your own system. - -(Note: At present, LynxOS version 2.4.0 is the latest officially released -version of LynxOS, and all of the above information is accurate and correct -for LynxOS 2.4.0 as of the time of this writing. However it is rumored that -future releases of LynxOS may incorporate some or all of the important system -include file fixes provided below. Thus, if you are building nvi for some -LynxOS version later than 2.4.0, you should probably go ahead and try to -apply the patches given below to your system include files, and then just -don't worry about it if these patches seem to have already been applied.) - - -4. A Brief Note about Sendmail -------------------------------- - -I should mention also that LynxOS does not normally ship with the `sendmail' -mail transfer program installed, either under /usr/lib/ or anywhere else for -that matter. This isn't really a big problem, but nvi normally wants and -expects to have a sendmail program available so that it can send users notifi- -cations (by mail) whenever a partially edited file is preserved by the editor -in response to a sudden system crash, a sudden system shutdown, or an unexpect- -ed serial-line hangup. You can configure and build nvi without any sendmail -program installed on your system, but you will get warnings about its absence -when you are doing the initial configure step prior to actually building nvi. -If you want to have a fully-functional nvi which does send out notification -messages (by mail) whenever partially edited files are preserved during a -serial line hangup or system crash, then you should get the BSD sendmail -sources (via ftp from ftp.cs.berkeley.edu), build and install sendmail, and -then reconfigure, rebuild, and reinstall nvi. - -Please contact me at the E-mail address below if you experience any problems in -building or using nvi on LynxOS. I make no guarrantees, but I may be willing -to try to help. - -Ron Guilmette -Roseville, California -<rfg@monkeys.com> -August 14, 1996 - - -cut here for LynxOS 2.4.0 system include files patches ------------------------------------------------------------------------------ -*** wait.h Fri Apr 26 10:02:45 1996 ---- wait.h Sun May 19 05:36:50 1996 -*************** -*** 94,104 **** - /* Function prototypes */ - #ifndef __LYNXOS -- #ifdef _POSIX_SOURCE - extern pid_t wait _AP((int *)); - extern pid_t waitpid _AP((pid_t, int *, int)); -! #else -! extern int wait _AP((union wait *)); -! extern int waitpid _AP((int, union wait *, int)); -! extern int wait3 _AP((union wait *, int, struct rusage *)); - #endif - #endif /* !__LYNXOS */ ---- 94,101 ---- - /* Function prototypes */ - #ifndef __LYNXOS - extern pid_t wait _AP((int *)); - extern pid_t waitpid _AP((pid_t, int *, int)); -! #ifndef _POSIX_SOURCE -! extern int wait3 _AP((int *, int, struct rusage *)); - #endif - #endif /* !__LYNXOS */ -*** ioctl.h Fri Apr 26 16:50:51 1996 ---- ioctl.h Sat May 18 17:55:16 1996 -*************** -*** 572,576 **** - - #ifndef __LYNXOS -! extern int ioctl _AP((int, int, char *)); - #endif - ---- 572,576 ---- - - #ifndef __LYNXOS -! extern int ioctl _AP((int, int, ...)); - #endif - -*** stdarg.h Fri Apr 26 16:51:02 1996 ---- stdarg.h Sat May 18 19:34:13 1996 -*************** -*** 88,92 **** - (((sizeof(TYPE) + sizeof(int) - 1) / sizeof(int)) * sizeof(int)) - -! #define va_start(AP, LASTARG) (AP = ((char *) __builtin_next_arg ())) - - void va_end(va_list); /* Defined in libgcc.a */ ---- 88,92 ---- - (((sizeof(TYPE) + sizeof(int) - 1) / sizeof(int)) * sizeof(int)) - -! #define va_start(AP, LASTARG) (AP = ((char *) __builtin_next_arg (LASTARG))) - - void va_end(va_list); /* Defined in libgcc.a */ -*************** -*** 162,166 **** - (((sizeof(TYPE) + sizeof(int) - 1) / sizeof(int)) * sizeof(int)) - -! #define va_start(AP, LASTARG) (AP = ((char *) __builtin_next_arg ())) - - void va_end(va_list); /* Defined in libgcc.a */ ---- 162,166 ---- - (((sizeof(TYPE) + sizeof(int) - 1) / sizeof(int)) * sizeof(int)) - -! #define va_start(AP, LASTARG) (AP = ((char *) __builtin_next_arg (LASTARG))) - - void va_end(va_list); /* Defined in libgcc.a */ diff --git a/build/acconfig.h b/build/acconfig.h deleted file mode 100644 index 567f9ee60070..000000000000 --- a/build/acconfig.h +++ /dev/null @@ -1,82 +0,0 @@ -/* @(#)acconfig.h 8.18 (Berkeley) 7/2/96 */ - -/* Define to `int' if <sys/types.h> doesn't define. */ -#undef ssize_t - -/* Define if you want a debugging version. */ -#undef DEBUG - -/* Define if you have a System V-style (broken) gettimeofday. */ -#undef HAVE_BROKEN_GETTIMEOFDAY - -/* Define if you have a Ultrix-style (broken) vdisable. */ -#undef HAVE_BROKEN_VDISABLE - -/* Define if you have a BSD version of curses. */ -#undef HAVE_BSD_CURSES - -/* Define if you have the curses(3) addnstr function. */ -#undef HAVE_CURSES_ADDNSTR - -/* Define if you have the curses(3) beep function. */ -#undef HAVE_CURSES_BEEP - -/* Define if you have the curses(3) flash function. */ -#undef HAVE_CURSES_FLASH - -/* Define if you have the curses(3) idlok function. */ -#undef HAVE_CURSES_IDLOK - -/* Define if you have the curses(3) keypad function. */ -#undef HAVE_CURSES_KEYPAD - -/* Define if you have the curses(3) newterm function. */ -#undef HAVE_CURSES_NEWTERM - -/* Define if you have the curses(3) setupterm function. */ -#undef HAVE_CURSES_SETUPTERM - -/* Define if you have the curses(3) tigetstr/tigetnum functions. */ -#undef HAVE_CURSES_TIGETSTR - -/* Define if you have the DB __hash_open call in the C library. */ -#undef HAVE_DB_HASH_OPEN - -/* Define if you have the chsize(2) system call. */ -#undef HAVE_FTRUNCATE_CHSIZE - -/* Define if you have the ftruncate(2) system call. */ -#undef HAVE_FTRUNCATE_FTRUNCATE - -/* Define if you have fcntl(2) style locking. */ -#undef HAVE_LOCK_FCNTL - -/* Define if you have flock(2) style locking. */ -#undef HAVE_LOCK_FLOCK - -/* Define if you want to compile in the Perl interpreter. */ -#undef HAVE_PERL_INTERP - -/* Define if your Perl is at least 5.003_01. */ -#undef HAVE_PERL_5_003_01 - -/* Define if you have the Berkeley style revoke(2) system call. */ -#undef HAVE_REVOKE - -/* Define if you have the Berkeley style strsep(3) function. */ -#undef HAVE_STRSEP - -/* Define if you have <sys/mman.h> */ -#undef HAVE_SYS_MMAN_H - -/* Define if you have <sys/select.h> */ -#undef HAVE_SYS_SELECT_H - -/* Define if you have the System V style pty calls. */ -#undef HAVE_SYS5_PTY - -/* Define if you want to compile in the Tcl interpreter. */ -#undef HAVE_TCL_INTERP - -/* Define if your sprintf returns a pointer, not a length. */ -#undef SPRINTF_RET_CHARPNT diff --git a/build/aclocal.m4 b/build/aclocal.m4 deleted file mode 100644 index de7e57ed3aac..000000000000 --- a/build/aclocal.m4 +++ /dev/null @@ -1,17 +0,0 @@ -AC_DEFUN(AM_SANITY_CHECK_CC, -[dnl Derived from macros from Bruno Haible and from Cygnus. -AC_MSG_CHECKING([whether the compiler ($CC $CFLAGS $LDFLAGS) actually works]) -AC_LANG_SAVE - AC_LANG_C - AC_TRY_RUN([main() { exit(0); }], - am_cv_prog_cc_works=yes, am_cv_prog_cc_works=no, - dnl When crosscompiling, just try linking. - AC_TRY_LINK([], [], am_cv_prog_cc_works=yes, - am_cv_prog_cc_works=no)) -AC_LANG_RESTORE -case "$am_cv_prog_cc_works" in - *no) AC_MSG_ERROR([Installation or configuration problem: C compiler cannot create executables.]) ;; - *yes) ;; -esac -AC_MSG_RESULT(yes) -])dnl diff --git a/build/config.guess b/build/config.guess deleted file mode 100755 index 4c314d97aacb..000000000000 --- a/build/config.guess +++ /dev/null @@ -1,571 +0,0 @@ -#! /bin/sh -# Attempt to guess a canonical system name. -# Copyright (C) 1992, 1993, 1994, 1995 Free Software Foundation, Inc. -# -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Written by Per Bothner <bothner@cygnus.com>. -# The master version of this file is at the FSF in /home/gd/gnu/lib. -# -# This script attempts to guess a canonical system name similar to -# config.sub. If it succeeds, it prints the system name on stdout, and -# exits with 0. Otherwise, it exits with 1. -# -# The plan is that this can be called by configure scripts if you -# don't specify an explicit system type (host/target name). -# -# Only a few systems have been added to this list; please add others -# (but try to keep the structure clean). -# - -# This is needed to find uname on a Pyramid OSx when run in the BSD universe. -# (ghazi@noc.rutgers.edu 8/24/94.) -if (test -f /.attbin/uname) >/dev/null 2>&1 ; then - PATH=$PATH:/.attbin ; export PATH -fi - -UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown -UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown -UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown -UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown - -trap 'rm -f dummy.c dummy.o dummy; exit 1' 1 2 15 - -# Note: order is significant - the case branches are not exclusive. - -case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in - alpha:OSF1:V*:*) - # After 1.2, OSF1 uses "V1.3" for uname -r. - echo alpha-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^V//'` - exit 0 ;; - alpha:OSF1:*:*) - # 1.2 uses "1.2" for uname -r. - echo alpha-dec-osf${UNAME_RELEASE} - exit 0 ;; - 21064:Windows_NT:50:3) - echo alpha-dec-winnt3.5 - exit 0 ;; - amiga:NetBSD:*:*) - echo m68k-cbm-netbsd${UNAME_RELEASE} - exit 0 ;; - arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) - echo arm-acorn-riscix${UNAME_RELEASE} - exit 0;; - Pyramid*:OSx*:*:*) - if test "`(/bin/universe) 2>/dev/null`" = att ; then - echo pyramid-pyramid-sysv3 - else - echo pyramid-pyramid-bsd - fi - exit 0 ;; - sun4*:SunOS:5.*:*) - echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - i86pc:SunOS:5.*:*) - echo i386-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - sun4*:SunOS:6*:*) - # According to config.sub, this is the proper way to canonicalize - # SunOS6. Hard to guess exactly what SunOS6 will be like, but - # it's likely to be more like Solaris than SunOS4. - echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - sun4*:SunOS:*:*) - case "`/usr/bin/arch -k`" in - Series*|S4*) - UNAME_RELEASE=`uname -v` - ;; - esac - # Japanese Language versions have a version number like `4.1.3-JL'. - echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` - exit 0 ;; - sun3*:SunOS:*:*) - echo m68k-sun-sunos${UNAME_RELEASE} - exit 0 ;; - atari*:NetBSD:*:*) - echo m68k-atari-netbsd${UNAME_RELEASE} - exit 0 ;; - sun3*:NetBSD:*:*) - echo m68k-sun-netbsd${UNAME_RELEASE} - exit 0 ;; - mac68k:NetBSD:*:*) - echo m68k-apple-netbsd${UNAME_RELEASE} - exit 0 ;; - RISC*:ULTRIX:*:*) - echo mips-dec-ultrix${UNAME_RELEASE} - exit 0 ;; - VAX*:ULTRIX*:*:*) - echo vax-dec-ultrix${UNAME_RELEASE} - exit 0 ;; - mips:*:4*:UMIPS) - echo mips-mips-riscos4sysv - exit 0 ;; - mips:*:5*:RISCos) - echo mips-mips-riscos${UNAME_RELEASE} - exit 0 ;; - m88k:CX/UX:7*:*) - echo m88k-harris-cxux7 - exit 0 ;; - m88k:*:4*:R4*) - echo m88k-motorola-sysv4 - exit 0 ;; - m88k:*:3*:R3*) - echo m88k-motorola-sysv3 - exit 0 ;; - AViiON:dgux:*:*) - if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \ - -o ${TARGET_BINARY_INTERFACE}x = x ] ; then - echo m88k-dg-dgux${UNAME_RELEASE} - else - echo m88k-dg-dguxbcs${UNAME_RELEASE} - fi - exit 0 ;; - M88*:DolphinOS:*:*) # DolphinOS (SVR3) - echo m88k-dolphin-sysv3 - exit 0 ;; - M88*:*:R3*:*) - # Delta 88k system running SVR3 - echo m88k-motorola-sysv3 - exit 0 ;; - XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) - echo m88k-tektronix-sysv3 - exit 0 ;; - Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) - echo m68k-tektronix-bsd - exit 0 ;; - *:IRIX*:*:*) - echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` - exit 0 ;; - ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' - i?86:AIX:*:*) - echo i386-ibm-aix - exit 0 ;; - *:AIX:2:3) - if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - sed 's/^ //' << EOF >dummy.c - #include <sys/systemcfg.h> - - main() - { - if (!__power_pc()) - exit(1); - puts("powerpc-ibm-aix3.2.5"); - exit(0); - } -EOF - ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0 - rm -f dummy.c dummy - echo rs6000-ibm-aix3.2.5 - elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then - echo rs6000-ibm-aix3.2.4 - else - echo rs6000-ibm-aix3.2 - fi - exit 0 ;; - *:AIX:*:4) - if /usr/sbin/lsattr -EHl proc0 | grep POWER >/dev/null 2>&1; then - IBM_ARCH=rs6000 - else - IBM_ARCH=powerpc - fi - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=4.${UNAME_RELEASE} - fi - echo ${IBM_ARCH}-ibm-aix${IBM_REV} - exit 0 ;; - *:AIX:*:*) - echo rs6000-ibm-aix - exit 0 ;; - ibmrt:4.4BSD:*|romp-ibm:BSD:*) - echo romp-ibm-bsd4.4 - exit 0 ;; - ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC NetBSD and - echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to - exit 0 ;; # report: romp-ibm BSD 4.3 - *:BOSX:*:*) - echo rs6000-bull-bosx - exit 0 ;; - DPX/2?00:B.O.S.:*:*) - echo m68k-bull-sysv3 - exit 0 ;; - 9000/[34]??:4.3bsd:1.*:*) - echo m68k-hp-bsd - exit 0 ;; - hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) - echo m68k-hp-bsd4.4 - exit 0 ;; - 9000/[3478]??:HP-UX:*:*) - case "${UNAME_MACHINE}" in - 9000/31? ) HP_ARCH=m68000 ;; - 9000/[34]?? ) HP_ARCH=m68k ;; - 9000/7?? | 9000/8?[79] ) HP_ARCH=hppa1.1 ;; - 9000/8?? ) HP_ARCH=hppa1.0 ;; - esac - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - echo ${HP_ARCH}-hp-hpux${HPUX_REV} - exit 0 ;; - 3050*:HI-UX:*:*) - sed 's/^ //' << EOF >dummy.c - #include <unistd.h> - int - main () - { - long cpu = sysconf (_SC_CPU_VERSION); - /* The order matters, because CPU_IS_HP_MC68K erroneously returns - true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct - results, however. */ - if (CPU_IS_PA_RISC (cpu)) - { - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; - case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; - default: puts ("hppa-hitachi-hiuxwe2"); break; - } - } - else if (CPU_IS_HP_MC68K (cpu)) - puts ("m68k-hitachi-hiuxwe2"); - else puts ("unknown-hitachi-hiuxwe2"); - exit (0); - } -EOF - ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0 - rm -f dummy.c dummy - echo unknown-hitachi-hiuxwe2 - exit 0 ;; - 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) - echo hppa1.1-hp-bsd - exit 0 ;; - 9000/8??:4.3bsd:*:*) - echo hppa1.0-hp-bsd - exit 0 ;; - hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) - echo hppa1.1-hp-osf - exit 0 ;; - hp8??:OSF1:*:*) - echo hppa1.0-hp-osf - exit 0 ;; - parisc*:Lites*:*:*) - echo hppa1.1-hp-lites - exit 0 ;; - C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) - echo c1-convex-bsd - exit 0 ;; - C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit 0 ;; - C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) - echo c34-convex-bsd - exit 0 ;; - C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) - echo c38-convex-bsd - exit 0 ;; - C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) - echo c4-convex-bsd - exit 0 ;; - CRAY*X-MP:*:*:*) - echo xmp-cray-unicos - exit 0 ;; - CRAY*Y-MP:*:*:*) - echo ymp-cray-unicos${UNAME_RELEASE} - exit 0 ;; - CRAY*C90:*:*:*) - echo c90-cray-unicos${UNAME_RELEASE} - exit 0 ;; - CRAY-2:*:*:*) - echo cray2-cray-unicos - exit 0 ;; - hp3[0-9][05]:NetBSD:*:*) - echo m68k-hp-netbsd${UNAME_RELEASE} - exit 0 ;; - i?86:BSD/386:*:* | *:BSD/OS:*:*) - echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} - exit 0 ;; - *:FreeBSD:*:*) - echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` - exit 0 ;; - *:NetBSD:*:*) - echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` - exit 0 ;; - *:GNU:*:*) - echo `echo ${UNAME_MACHINE}|sed -e 's,/.*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` - exit 0 ;; - *:Linux:*:*) - # The BFD linker knows what the default object file format is, so - # first see if it will tell us. - ld_help_string=`ld --help 2>&1` - if echo $ld_help_string | grep >/dev/null 2>&1 "supported emulations: elf_i?86"; then - echo "${UNAME_MACHINE}-unknown-linux" ; exit 0 - elif echo $ld_help_string | grep >/dev/null 2>&1 "supported emulations: i?86linux"; then - echo "${UNAME_MACHINE}-unknown-linuxaout" ; exit 0 - elif echo $ld_help_string | grep >/dev/null 2>&1 "supported emulations: i?86coff"; then - echo "${UNAME_MACHINE}-unknown-linuxcoff" ; exit 0 - elif test "${UNAME_MACHINE}" = "alpha" ; then - echo alpha-unknown-linux ; exit 0 - else - # Either a pre-BFD a.out linker (linuxoldld) or one that does not give us - # useful --help. Gcc wants to distinguish between linuxoldld and linuxaout. - test ! -d /usr/lib/ldscripts/. \ - && echo "${UNAME_MACHINE}-unknown-linuxoldld" && exit 0 - # Determine whether the default compiler is a.out or elf - cat >dummy.c <<EOF -main(argc, argv) -int argc; -char *argv[]; -{ -#ifdef __ELF__ - printf ("%s-unknown-linux\n", argv[1]); -#else - printf ("%s-unknown-linuxaout\n", argv[1]); -#endif - return 0; -} -EOF - ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0 - rm -f dummy.c dummy - fi ;; -# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions -# are messed up and put the nodename in both sysname and nodename. - i?86:DYNIX/ptx:4*:*) - echo i386-sequent-sysv4 - exit 0 ;; - i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*) - if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then - echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE} - else - echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE} - fi - exit 0 ;; - i?86:*:3.2:*) - if test -f /usr/options/cb.name; then - UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name` - echo ${UNAME_MACHINE}-unknown-isc$UNAME_REL - elif /bin/uname -X 2>/dev/null >/dev/null ; then - UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')` - (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486 - echo ${UNAME_MACHINE}-unknown-sco$UNAME_REL - else - echo ${UNAME_MACHINE}-unknown-sysv32 - fi - exit 0 ;; - Intel:Mach:3*:*) - echo i386-unknown-mach3 - exit 0 ;; - paragon:*:*:*) - echo i860-intel-osf1 - exit 0 ;; - i860:*:4.*:*) # i860-SVR4 - if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then - echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 - else # Add other i860-SVR4 vendors below as they are discovered. - echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 - fi - exit 0 ;; - mini*:CTIX:SYS*5:*) - # "miniframe" - echo m68010-convergent-sysv - exit 0 ;; - M680?0:*:R3V[567]*:*) - test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; - 3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0) - uname -p 2>/dev/null | grep 86 >/dev/null \ - && echo i486-ncr-sysv4.3 && exit 0 ;; - 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) - uname -p 2>/dev/null | grep 86 >/dev/null \ - && echo i486-ncr-sysv4 && exit 0 ;; - m68*:LynxOS:2.*:*) - echo m68k-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - mc68*:UNIX_System_V:4.*:*) - echo m68k-atari-sysv4 - exit 0 ;; - i?86:LynxOS:2.*:*) - echo i386-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - TSUNAMI:LynxOS:2.*:* | uSPARC2:LynxOS:2.*:*) - echo sparc-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - PowerPC:LynxOS:2.*:*) - echo powerpc-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - RM*:SINIX-*:*:*) - echo mips-sni-sysv4 - exit 0 ;; - *FTX*) - echo i860-stratus-sysv4 - exit 0 ;; - *:SINIX-*:*:*) - if uname -p 2>/dev/null >/dev/null ; then - UNAME_MACHINE=`(uname -p) 2>/dev/null` - echo ${UNAME_MACHINE}-sni-sysv4 - else - echo ns32k-sni-sysv - fi - exit 0 ;; - mc68*:A/UX:*:*) - echo m68k-apple-aux${UNAME_RELEASE} - exit 0 ;; -esac - -#echo '(No uname command or uname output not recognized.)' 1>&2 -#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 - -cat >dummy.c <<EOF -#ifdef _SEQUENT_ -# include <sys/types.h> -# include <sys/utsname.h> -#endif -main () -{ -#if defined (sony) -#if defined (MIPSEB) - /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, - I don't know.... */ - printf ("mips-sony-bsd\n"); exit (0); -#else -#include <sys/param.h> - printf ("m68k-sony-newsos%s\n", -#ifdef NEWSOS4 - "4" -#else - "" -#endif - ); exit (0); -#endif -#endif - -#if defined (__arm) && defined (__acorn) && defined (__unix) - printf ("arm-acorn-riscix"); exit (0); -#endif - -#if defined (hp300) && !defined (hpux) - printf ("m68k-hp-bsd\n"); exit (0); -#endif - -#if defined (NeXT) -#if !defined (__ARCHITECTURE__) -#define __ARCHITECTURE__ "m68k" -#endif - int version; - version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; - printf ("%s-next-nextstep%s\n", __ARCHITECTURE__, version==2 ? "2" : "3"); - exit (0); -#endif - -#if defined (MULTIMAX) || defined (n16) -#if defined (UMAXV) - printf ("ns32k-encore-sysv\n"); exit (0); -#else -#if defined (CMU) - printf ("ns32k-encore-mach\n"); exit (0); -#else - printf ("ns32k-encore-bsd\n"); exit (0); -#endif -#endif -#endif - -#if defined (__386BSD__) - printf ("i386-unknown-bsd\n"); exit (0); -#endif - -#if defined (sequent) -#if defined (i386) - printf ("i386-sequent-dynix\n"); exit (0); -#endif -#if defined (ns32000) - printf ("ns32k-sequent-dynix\n"); exit (0); -#endif -#endif - -#if defined (_SEQUENT_) - struct utsname un; - - uname(&un); - - if (strncmp(un.version, "V2", 2) == 0) { - printf ("i386-sequent-ptx2\n"); exit (0); - } - if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ - printf ("i386-sequent-ptx1\n"); exit (0); - } - printf ("i386-sequent-ptx\n"); exit (0); - -#endif - -#if defined (vax) -#if !defined (ultrix) - printf ("vax-dec-bsd\n"); exit (0); -#else - printf ("vax-dec-ultrix\n"); exit (0); -#endif -#endif - -#if defined (alliant) && defined (i860) - printf ("i860-alliant-bsd\n"); exit (0); -#endif - - exit (1); -} -EOF - -${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy && rm dummy.c dummy && exit 0 -rm -f dummy.c dummy - -# Apollos put the system type in the environment. - -test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } - -# Convex versions that predate uname can use getsysinfo(1) - -if [ -x /usr/convex/getsysinfo ] -then - case `getsysinfo -f cpu_type` in - c1*) - echo c1-convex-bsd - exit 0 ;; - c2*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit 0 ;; - c34*) - echo c34-convex-bsd - exit 0 ;; - c38*) - echo c38-convex-bsd - exit 0 ;; - c4*) - echo c4-convex-bsd - exit 0 ;; - esac -fi - -#echo '(Unable to guess system type)' 1>&2 - -exit 1 diff --git a/build/config.h.in b/build/config.h.in deleted file mode 100644 index c87fcdd7f214..000000000000 --- a/build/config.h.in +++ /dev/null @@ -1,179 +0,0 @@ -/* config.h.in. Generated automatically from configure.in by autoheader. */ - -/* Define to empty if the keyword does not work. */ -#undef const - -/* Define if you have a working `mmap' system call. */ -#undef HAVE_MMAP - -/* Define if your struct stat has st_blksize. */ -#undef HAVE_ST_BLKSIZE - -/* Define if you have <vfork.h>. */ -#undef HAVE_VFORK_H - -/* Define to `int' if <sys/types.h> doesn't define. */ -#undef mode_t - -/* Define to `long' if <sys/types.h> doesn't define. */ -#undef off_t - -/* Define to `int' if <sys/types.h> doesn't define. */ -#undef pid_t - -/* Define to `unsigned' if <sys/types.h> doesn't define. */ -#undef size_t - -/* Define if you have the ANSI C header files. */ -#undef STDC_HEADERS - -/* Define if your <sys/time.h> declares struct tm. */ -#undef TM_IN_SYS_TIME - -/* Define vfork as fork if vfork does not work. */ -#undef vfork - -/* Define if your processor stores words with the most significant - byte first (like Motorola and SPARC, unlike Intel and VAX). */ -#undef WORDS_BIGENDIAN - -/* Define to `int' if <sys/types.h> doesn't define. */ -#undef ssize_t - -/* Define if you want a debugging version. */ -#undef DEBUG - -/* Define if you have a System V-style (broken) gettimeofday. */ -#undef HAVE_BROKEN_GETTIMEOFDAY - -/* Define if you have a Ultrix-style (broken) vdisable. */ -#undef HAVE_BROKEN_VDISABLE - -/* Define if you have a BSD version of curses. */ -#undef HAVE_BSD_CURSES - -/* Define if you have the curses(3) addnstr function. */ -#undef HAVE_CURSES_ADDNSTR - -/* Define if you have the curses(3) beep function. */ -#undef HAVE_CURSES_BEEP - -/* Define if you have the curses(3) flash function. */ -#undef HAVE_CURSES_FLASH - -/* Define if you have the curses(3) idlok function. */ -#undef HAVE_CURSES_IDLOK - -/* Define if you have the curses(3) keypad function. */ -#undef HAVE_CURSES_KEYPAD - -/* Define if you have the curses(3) newterm function. */ -#undef HAVE_CURSES_NEWTERM - -/* Define if you have the curses(3) setupterm function. */ -#undef HAVE_CURSES_SETUPTERM - -/* Define if you have the curses(3) tigetstr/tigetnum functions. */ -#undef HAVE_CURSES_TIGETSTR - -/* Define if you have the chsize(2) system call. */ -#undef HAVE_FTRUNCATE_CHSIZE - -/* Define if you have the ftruncate(2) system call. */ -#undef HAVE_FTRUNCATE_FTRUNCATE - -/* Define if you have fcntl(2) style locking. */ -#undef HAVE_LOCK_FCNTL - -/* Define if you have flock(2) style locking. */ -#undef HAVE_LOCK_FLOCK - -/* Define if you want to compile in the Perl interpreter. */ -#undef HAVE_PERL_INTERP - -/* Define if your Perl is at least 5.003_01. */ -#undef HAVE_PERL_5_003_01 - -/* Define if you have the Berkeley style revoke(2) system call. */ -#undef HAVE_REVOKE - -/* Define if you have <sys/mman.h> */ -#undef HAVE_SYS_MMAN_H - -/* Define if you have <sys/select.h> */ -#undef HAVE_SYS_SELECT_H - -/* Define if you have the System V style pty calls. */ -#undef HAVE_SYS5_PTY - -/* Define if you want to compile in the Tcl interpreter. */ -#undef HAVE_TCL_INTERP - -/* Define if your sprintf returns a pointer, not a length. */ -#undef SPRINTF_RET_CHARPNT - -/* Define if you have the bsearch function. */ -#undef HAVE_BSEARCH - -/* Define if you have the gethostname function. */ -#undef HAVE_GETHOSTNAME - -/* Define if you have the getopt function. */ -#undef HAVE_GETOPT - -/* Define if you have the getpagesize function. */ -#undef HAVE_GETPAGESIZE - -/* Define if you have the memchr function. */ -#undef HAVE_MEMCHR - -/* Define if you have the memcpy function. */ -#undef HAVE_MEMCPY - -/* Define if you have the memmove function. */ -#undef HAVE_MEMMOVE - -/* Define if you have the memset function. */ -#undef HAVE_MEMSET - -/* Define if you have the mkstemp function. */ -#undef HAVE_MKSTEMP - -/* Define if you have the mmap function. */ -#undef HAVE_MMAP - -/* Define if you have the select function. */ -#undef HAVE_SELECT - -/* Define if you have the setenv function. */ -#undef HAVE_SETENV - -/* Define if you have the snprintf function. */ -#undef HAVE_SNPRINTF - -/* Define if you have the strdup function. */ -#undef HAVE_STRDUP - -/* Define if you have the strerror function. */ -#undef HAVE_STRERROR - -/* Define if you have the strpbrk function. */ -#undef HAVE_STRPBRK - -/* Define if you have the strsep function. */ -#undef HAVE_STRSEP - -/* Define if you have the strtol function. */ -#undef HAVE_STRTOL - -/* Define if you have the strtoul function. */ -#undef HAVE_STRTOUL - -/* Define if you have the unsetenv function. */ -#undef HAVE_UNSETENV - -/* Define if you have the valloc function. */ -#undef HAVE_VALLOC - -/* Define if you have the vsnprintf function. */ -#undef HAVE_VSNPRINTF diff --git a/build/config.sub b/build/config.sub deleted file mode 100755 index 43f086781962..000000000000 --- a/build/config.sub +++ /dev/null @@ -1,872 +0,0 @@ -#! /bin/sh -# Configuration validation subroutine script, version 1.1. -# Copyright (C) 1991, 1992, 1993, 1994, 1995 Free Software Foundation, Inc. -# This file is (in principle) common to ALL GNU software. -# The presence of a machine in this file suggests that SOME GNU software -# can handle that machine. It does not imply ALL GNU software can. -# -# This file is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, -# Boston, MA 02111-1307, USA. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Configuration subroutine to validate and canonicalize a configuration type. -# Supply the specified configuration type as an argument. -# If it is invalid, we print an error message on stderr and exit with code 1. -# Otherwise, we print the canonical config type on stdout and succeed. - -# This file is supposed to be the same for all GNU packages -# and recognize all the CPU types, system types and aliases -# that are meaningful with *any* GNU software. -# Each package is responsible for reporting which valid configurations -# it does not support. The user should be able to distinguish -# a failure to support a valid configuration from a meaningless -# configuration. - -# The goal of this file is to map all the various variations of a given -# machine specification into a single specification in the form: -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# It is wrong to echo any other type of specification. - -if [ x$1 = x ] -then - echo Configuration name missing. 1>&2 - echo "Usage: $0 CPU-MFR-OPSYS" 1>&2 - echo "or $0 ALIAS" 1>&2 - echo where ALIAS is a recognized configuration type. 1>&2 - exit 1 -fi - -# First pass through any local machine types. -case $1 in - *local*) - echo $1 - exit 0 - ;; - *) - ;; -esac - -# Separate what the user gave into CPU-COMPANY and OS (if any). -basic_machine=`echo $1 | sed 's/-[^-]*$//'` -if [ $basic_machine != $1 ] -then os=`echo $1 | sed 's/.*-/-/'` -else os=; fi - -### Let's recognize common machines as not being operating systems so -### that things like config.sub decstation-3100 work. We also -### recognize some manufacturers as not being operating systems, so we -### can provide default operating systems below. -case $os in - -sun*os*) - # Prevent following clause from handling this invalid input. - ;; - -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ - -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ - -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ - -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ - -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ - -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp ) - os= - basic_machine=$1 - ;; - -hiux*) - os=-hiuxwe2 - ;; - -sco4) - os=-sco3.2v4 - basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'` - ;; - -sco3.2.[4-9]*) - os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` - basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'` - ;; - -sco3.2v[4-9]*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'` - ;; - -sco*) - os=-sco3.2v2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'` - ;; - -isc) - os=-isc2.2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'` - ;; - -clix*) - basic_machine=clipper-intergraph - ;; - -isc*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'` - ;; - -lynx*) - os=-lynxos - ;; - -ptx*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` - ;; - -windowsnt*) - os=`echo $os | sed -e 's/windowsnt/winnt/'` - ;; -esac - -# Decode aliases for certain CPU-COMPANY combinations. -case $basic_machine in - # Recognize the basic CPU types without company name. - # Some are omitted here because they have special meanings below. - tahoe | i[345]86 | i860 | m68k | m68000 | m88k | ns32k | arm \ - | arme[lb] | pyramid \ - | tron | a29k | 580 | i960 | h8300 | hppa1.0 | hppa1.1 \ - | alpha | we32k | ns16k | clipper | sparclite | i370 | sh \ - | powerpc | powerpcle | sparc64 | 1750a | dsp16xx | mips64 | mipsel \ - | pdp11 | mips64el | mips64orion | mips64orionel \ - | sparc) - basic_machine=$basic_machine-unknown - ;; - # Object if more than one company name word. - *-*-*) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; - # Recognize the basic CPU types with company name. - vax-* | tahoe-* | i[345]86-* | i860-* | m68k-* | m68000-* | m88k-* \ - | sparc-* | ns32k-* | fx80-* | arm-* | c[123]* \ - | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* | power-* \ - | none-* | 580-* | cray2-* | h8300-* | i960-* | xmp-* | ymp-* \ - | hppa1.0-* | hppa1.1-* | alpha-* | we32k-* | cydra-* | ns16k-* \ - | pn-* | np1-* | xps100-* | clipper-* | orion-* | sparclite-* \ - | pdp11-* | sh-* | powerpc-* | powerpcle-* | sparc64-* | mips64-* | mipsel-* \ - | mips64el-* | mips64orion-* | mips64orionel-*) - ;; - # Recognize the various machine names and aliases which stand - # for a CPU type and a company and sometimes even an OS. - 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) - basic_machine=m68000-att - ;; - 3b*) - basic_machine=we32k-att - ;; - alliant | fx80) - basic_machine=fx80-alliant - ;; - altos | altos3068) - basic_machine=m68k-altos - ;; - am29k) - basic_machine=a29k-none - os=-bsd - ;; - amdahl) - basic_machine=580-amdahl - os=-sysv - ;; - amiga | amiga-*) - basic_machine=m68k-cbm - ;; - amigados) - basic_machine=m68k-cbm - os=-amigados - ;; - amigaunix | amix) - basic_machine=m68k-cbm - os=-sysv4 - ;; - apollo68) - basic_machine=m68k-apollo - os=-sysv - ;; - balance) - basic_machine=ns32k-sequent - os=-dynix - ;; - convex-c1) - basic_machine=c1-convex - os=-bsd - ;; - convex-c2) - basic_machine=c2-convex - os=-bsd - ;; - convex-c32) - basic_machine=c32-convex - os=-bsd - ;; - convex-c34) - basic_machine=c34-convex - os=-bsd - ;; - convex-c38) - basic_machine=c38-convex - os=-bsd - ;; - cray | ymp) - basic_machine=ymp-cray - os=-unicos - ;; - cray2) - basic_machine=cray2-cray - os=-unicos - ;; - crds | unos) - basic_machine=m68k-crds - ;; - da30 | da30-*) - basic_machine=m68k-da30 - ;; - decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) - basic_machine=mips-dec - ;; - delta | 3300 | motorola-3300 | motorola-delta \ - | 3300-motorola | delta-motorola) - basic_machine=m68k-motorola - ;; - delta88) - basic_machine=m88k-motorola - os=-sysv3 - ;; - dpx20 | dpx20-*) - basic_machine=rs6000-bull - os=-bosx - ;; - dpx2* | dpx2*-bull) - basic_machine=m68k-bull - os=-sysv3 - ;; - ebmon29k) - basic_machine=a29k-amd - os=-ebmon - ;; - elxsi) - basic_machine=elxsi-elxsi - os=-bsd - ;; - encore | umax | mmax) - basic_machine=ns32k-encore - ;; - fx2800) - basic_machine=i860-alliant - ;; - genix) - basic_machine=ns32k-ns - ;; - gmicro) - basic_machine=tron-gmicro - os=-sysv - ;; - h3050r* | hiux*) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - h8300hms) - basic_machine=h8300-hitachi - os=-hms - ;; - harris) - basic_machine=m88k-harris - os=-sysv3 - ;; - hp300-*) - basic_machine=m68k-hp - ;; - hp300bsd) - basic_machine=m68k-hp - os=-bsd - ;; - hp300hpux) - basic_machine=m68k-hp - os=-hpux - ;; - hp9k2[0-9][0-9] | hp9k31[0-9]) - basic_machine=m68000-hp - ;; - hp9k3[2-9][0-9]) - basic_machine=m68k-hp - ;; - hp9k7[0-9][0-9] | hp7[0-9][0-9] | hp9k8[0-9]7 | hp8[0-9]7) - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][0-9] | hp8[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - i370-ibm* | ibm*) - basic_machine=i370-ibm - os=-mvs - ;; -# I'm not sure what "Sysv32" means. Should this be sysv3.2? - i[345]86v32) - basic_machine=`echo $1 | sed -e 's/86.*/86-unknown/'` - os=-sysv32 - ;; - i[345]86v4*) - basic_machine=`echo $1 | sed -e 's/86.*/86-unknown/'` - os=-sysv4 - ;; - i[345]86v) - basic_machine=`echo $1 | sed -e 's/86.*/86-unknown/'` - os=-sysv - ;; - i[345]86sol2) - basic_machine=`echo $1 | sed -e 's/86.*/86-unknown/'` - os=-solaris2 - ;; - iris | iris4d) - basic_machine=mips-sgi - case $os in - -irix*) - ;; - *) - os=-irix4 - ;; - esac - ;; - isi68 | isi) - basic_machine=m68k-isi - os=-sysv - ;; - m88k-omron*) - basic_machine=m88k-omron - ;; - mac | macintosh) - basic_machine=m68k-apple - ;; - magnum | m3230) - basic_machine=mips-mips - os=-sysv - ;; - merlin) - basic_machine=ns32k-utek - os=-sysv - ;; - miniframe) - basic_machine=m68000-convergent - ;; - mips3*-*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` - ;; - mips3*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown - ;; - ncr3000) - basic_machine=i486-ncr - os=-sysv4 - ;; - news | news700 | news800 | news900) - basic_machine=m68k-sony - os=-newsos - ;; - news1000) - basic_machine=m68030-sony - os=-newsos - ;; - news-3600 | risc-news) - basic_machine=mips-sony - os=-newsos - ;; - next | m*-next ) - basic_machine=m68k-next - case $os in - -nextstep* ) - ;; - -ns2*) - os=-nextstep2 - ;; - *) - os=-nextstep3 - ;; - esac - ;; - nh3000) - basic_machine=m68k-harris - os=-cxux - ;; - nh[45]000) - basic_machine=m88k-harris - os=-cxux - ;; - nindy960) - basic_machine=i960-intel - os=-nindy - ;; - np1) - basic_machine=np1-gould - ;; - pa-hitachi) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - paragon) - basic_machine=i860-intel - os=-osf - ;; - pbd) - basic_machine=sparc-tti - ;; - pbb) - basic_machine=m68k-tti - ;; - pc532 | pc532-*) - basic_machine=ns32k-pc532 - ;; - pentium | p5 | p6) - # We don't have specific support for the Intel Pentium (p6) followon yet, so just call it a Pentium - basic_machine=i586-intel - ;; - pentium-* | p5-* | p6-*) - # We don't have specific support for the Intel Pentium (p6) followon yet, so just call it a Pentium - basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - k5) - # We don't have specific support for AMD's K5 yet, so just call it a Pentium - basic_machine=i586-amd - ;; - nexen) - # We don't have specific support for Nexgen yet, so just call it a Pentium - basic_machine=i586-nexgen - ;; - pn) - basic_machine=pn-gould - ;; - power) basic_machine=rs6000-ibm - ;; - ppc) basic_machine=powerpc-unknown - ;; - ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppcle | powerpclittle | ppc-le | powerpc-little) - basic_machine=powerpcle-unknown - ;; - ppcle-* | powerpclittle-*) - basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ps2) - basic_machine=i386-ibm - ;; - rm[46]00) - basic_machine=mips-siemens - ;; - rtpc | rtpc-*) - basic_machine=romp-ibm - ;; - sequent) - basic_machine=i386-sequent - ;; - sh) - basic_machine=sh-hitachi - os=-hms - ;; - sps7) - basic_machine=m68k-bull - os=-sysv2 - ;; - spur) - basic_machine=spur-unknown - ;; - sun2) - basic_machine=m68000-sun - ;; - sun2os3) - basic_machine=m68000-sun - os=-sunos3 - ;; - sun2os4) - basic_machine=m68000-sun - os=-sunos4 - ;; - sun3os3) - basic_machine=m68k-sun - os=-sunos3 - ;; - sun3os4) - basic_machine=m68k-sun - os=-sunos4 - ;; - sun4os3) - basic_machine=sparc-sun - os=-sunos3 - ;; - sun4os4) - basic_machine=sparc-sun - os=-sunos4 - ;; - sun4sol2) - basic_machine=sparc-sun - os=-solaris2 - ;; - sun3 | sun3-*) - basic_machine=m68k-sun - ;; - sun4) - basic_machine=sparc-sun - ;; - sun386 | sun386i | roadrunner) - basic_machine=i386-sun - ;; - symmetry) - basic_machine=i386-sequent - os=-dynix - ;; - tower | tower-32) - basic_machine=m68k-ncr - ;; - udi29k) - basic_machine=a29k-amd - os=-udi - ;; - ultra3) - basic_machine=a29k-nyu - os=-sym1 - ;; - vaxv) - basic_machine=vax-dec - os=-sysv - ;; - vms) - basic_machine=vax-dec - os=-vms - ;; - vxworks960) - basic_machine=i960-wrs - os=-vxworks - ;; - vxworks68) - basic_machine=m68k-wrs - os=-vxworks - ;; - vxworks29k) - basic_machine=a29k-wrs - os=-vxworks - ;; - xmp) - basic_machine=xmp-cray - os=-unicos - ;; - xps | xps100) - basic_machine=xps100-honeywell - ;; - none) - basic_machine=none-none - os=-none - ;; - -# Here we handle the default manufacturer of certain CPU types. It is in -# some cases the only manufacturer, in others, it is the most popular. - mips) - basic_machine=mips-mips - ;; - romp) - basic_machine=romp-ibm - ;; - rs6000) - basic_machine=rs6000-ibm - ;; - vax) - basic_machine=vax-dec - ;; - pdp11) - basic_machine=pdp11-dec - ;; - we32k) - basic_machine=we32k-att - ;; - sparc) - basic_machine=sparc-sun - ;; - cydra) - basic_machine=cydra-cydrome - ;; - orion) - basic_machine=orion-highlevel - ;; - orion105) - basic_machine=clipper-highlevel - ;; - *) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; -esac - -# Here we canonicalize certain aliases for manufacturers. -case $basic_machine in - *-digital*) - basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` - ;; - *-commodore*) - basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` - ;; - *) - ;; -esac - -# Decode manufacturer-specific aliases for certain operating systems. - -if [ x"$os" != x"" ] -then -case $os in - # -solaris* is a basic system type, with this one exception. - -solaris1 | -solaris1.*) - os=`echo $os | sed -e 's|solaris1|sunos4|'` - ;; - -solaris) - os=-solaris2 - ;; - -unixware* | svr4*) - os=-sysv4 - ;; - -gnu/linux*) - os=`echo $os | sed -e 's|gnu/linux|linux|'` - ;; - # First accept the basic system types. - # The portable systems comes first. - # Each alternative MUST END IN A *, to match a version number. - # -sysv* is not here because it comes later, after sysvr4. - -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ - | -vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[345]* \ - | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ - | -amigados* | -msdos* | -newsos* | -unicos* | -aos* \ - | -nindy* | -vxworks* | -ebmon* | -hms* | -mvs* | -clix* \ - | -riscos* | -linux* | -uniplus* | -iris* | -rtu* | -xenix* \ - | -hiux* | -386bsd* | -netbsd* | -freebsd* | -riscix* \ - | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* \ - | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ - | -udi* | -eabi* | -lites* ) - # Remember, each alternative MUST END IN *, to match a version number. - ;; - -aux*) - ;; - -sunos5*) - os=`echo $os | sed -e 's|sunos5|solaris2|'` - ;; - -sunos6*) - os=`echo $os | sed -e 's|sunos6|solaris3|'` - ;; - -osfrose*) - os=-osfrose - ;; - -osf*) - os=-osf - ;; - -utek*) - os=-bsd - ;; - -dynix*) - os=-bsd - ;; - -acis*) - os=-aos - ;; - -ctix* | -uts*) - os=-sysv - ;; - # Preserve the version number of sinix5. - -sinix5.*) - os=`echo $os | sed -e 's|sinix|sysv|'` - ;; - -sinix*) - os=-sysv4 - ;; - -triton*) - os=-sysv3 - ;; - -oss*) - os=-sysv3 - ;; - -svr4) - os=-sysv4 - ;; - -svr3) - os=-sysv3 - ;; - -sysvr4) - os=-sysv4 - ;; - # This must come after -sysvr4. - -sysv*) - ;; - -xenix) - os=-xenix - ;; - -none) - ;; - *) - # Get rid of the `-' at the beginning of $os. - os=`echo $os | sed 's/[^-]*-//'` - echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 - exit 1 - ;; -esac -else - -# Here we handle the default operating systems that come with various machines. -# The value should be what the vendor currently ships out the door with their -# machine or put another way, the most popular os provided with the machine. - -# Note that if you're going to try to match "-MANUFACTURER" here (say, -# "-sun"), then you have to tell the case statement up towards the top -# that MANUFACTURER isn't an operating system. Otherwise, code above -# will signal an error saying that MANUFACTURER isn't an operating -# system, and we'll never get to this point. - -case $basic_machine in - *-acorn) - os=-riscix1.2 - ;; - arm*-semi) - os=-aout - ;; - pdp11-*) - os=-none - ;; - *-dec | vax-*) - os=-ultrix4.2 - ;; - m68*-apollo) - os=-domain - ;; - i386-sun) - os=-sunos4.0.2 - ;; - m68000-sun) - os=-sunos3 - # This also exists in the configure program, but was not the - # default. - # os=-sunos4 - ;; - *-tti) # must be before sparc entry or we get the wrong os. - os=-sysv3 - ;; - sparc-* | *-sun) - os=-sunos4.1.1 - ;; - *-ibm) - os=-aix - ;; - *-hp) - os=-hpux - ;; - *-hitachi) - os=-hiux - ;; - i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) - os=-sysv - ;; - *-cbm) - os=-amigados - ;; - *-dg) - os=-dgux - ;; - *-dolphin) - os=-sysv3 - ;; - m68k-ccur) - os=-rtu - ;; - m88k-omron*) - os=-luna - ;; - *-sequent) - os=-ptx - ;; - *-crds) - os=-unos - ;; - *-ns) - os=-genix - ;; - i370-*) - os=-mvs - ;; - *-next) - os=-nextstep3 - ;; - *-gould) - os=-sysv - ;; - *-highlevel) - os=-bsd - ;; - *-encore) - os=-bsd - ;; - *-sgi) - os=-irix - ;; - *-siemens) - os=-sysv4 - ;; - *-masscomp) - os=-rtu - ;; - *) - os=-none - ;; -esac -fi - -# Here we handle the case where we know the os, and the CPU type, but not the -# manufacturer. We pick the logical manufacturer. -vendor=unknown -case $basic_machine in - *-unknown) - case $os in - -riscix*) - vendor=acorn - ;; - -sunos*) - vendor=sun - ;; - -aix*) - vendor=ibm - ;; - -hpux*) - vendor=hp - ;; - -hiux*) - vendor=hitachi - ;; - -unos*) - vendor=crds - ;; - -dgux*) - vendor=dg - ;; - -luna*) - vendor=omron - ;; - -genix*) - vendor=ns - ;; - -mvs*) - vendor=ibm - ;; - -ptx*) - vendor=sequent - ;; - -vxworks*) - vendor=wrs - ;; - -aux*) - vendor=apple - ;; - esac - basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` - ;; -esac - -echo $basic_machine$os diff --git a/build/configure b/build/configure deleted file mode 100755 index e2055d113ca8..000000000000 --- a/build/configure +++ /dev/null @@ -1,4446 +0,0 @@ -#! /bin/sh - -# Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.7 -# Copyright (C) 1992, 1993, 1994 Free Software Foundation, Inc. -# -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. - -# Defaults: -ac_help= -ac_default_prefix=/usr/local -# Any additions from configure.in: -ac_help="$ac_help - --enable-debug Build a debugging version." -ac_help="$ac_help - --with-x use the X Window System" -ac_help="$ac_help - --enable-perlinterp Include a Perl interpreter in vi." -ac_help="$ac_help - --enable-tknvi Build a Tk/Tcl front-end for vi." -ac_help="$ac_help - --enable-tclinterp Include a Tk/Tcl interpreter in vi." -ac_help="$ac_help - --disable-curses DON'T use the nvi-provided curses routines." -ac_help="$ac_help - --disable-db DON'T use the nvi-provided DB routines." -ac_help="$ac_help - --disable-re DON'T use the nvi-provided RE routines." - -# Initialize some variables set by options. -# The variables have the same names as the options, with -# dashes changed to underlines. -build=NONE -cache_file=./config.cache -exec_prefix=NONE -host=NONE -no_create= -nonopt=NONE -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -target=NONE -verbose= -x_includes=NONE -x_libraries=NONE -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datadir='${prefix}/share' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -libdir='${exec_prefix}/lib' -includedir='${prefix}/include' -oldincludedir='/usr/include' -infodir='${prefix}/info' -mandir='${prefix}/man' - -# Initialize some other variables. -subdirs= -MFLAGS= MAKEFLAGS= - -ac_prev= -for ac_option -do - - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval "$ac_prev=\$ac_option" - ac_prev= - continue - fi - - case "$ac_option" in - -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; - *) ac_optarg= ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case "$ac_option" in - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir="$ac_optarg" ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build="$ac_optarg" ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file="$ac_optarg" ;; - - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ - | --da=*) - datadir="$ac_optarg" ;; - - -disable-* | --disable-*) - ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then - { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } - fi - ac_feature=`echo $ac_feature| sed 's/-/_/g'` - eval "enable_${ac_feature}=no" ;; - - -enable-* | --enable-*) - ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then - { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } - fi - ac_feature=`echo $ac_feature| sed 's/-/_/g'` - case "$ac_option" in - *=*) ;; - *) ac_optarg=yes ;; - esac - eval "enable_${ac_feature}='$ac_optarg'" ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix="$ac_optarg" ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he) - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat << EOF -Usage: configure [options] [host] -Options: [defaults in brackets after descriptions] -Configuration: - --cache-file=FILE cache test results in FILE - --help print this message - --no-create do not create output files - --quiet, --silent do not print \`checking...' messages - --version print the version of autoconf that created configure -Directory and file names: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [same as prefix] - --bindir=DIR user executables in DIR [EPREFIX/bin] - --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] - --libexecdir=DIR program executables in DIR [EPREFIX/libexec] - --datadir=DIR read-only architecture-independent data in DIR - [PREFIX/share] - --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data in DIR - [PREFIX/com] - --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] - --libdir=DIR object code libraries in DIR [EPREFIX/lib] - --includedir=DIR C header files in DIR [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] - --infodir=DIR info documentation in DIR [PREFIX/info] - --mandir=DIR man documentation in DIR [PREFIX/man] - --srcdir=DIR find the sources in DIR [configure dir or ..] - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM - run sed PROGRAM on installed program names -EOF - cat << EOF -Host type: - --build=BUILD configure for building on BUILD [BUILD=HOST] - --host=HOST configure for HOST [guessed] - --target=TARGET configure for TARGET [TARGET=HOST] -Features and packages: - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --x-includes=DIR X include files are in DIR - --x-libraries=DIR X library files are in DIR -EOF - if test -n "$ac_help"; then - echo "--enable and --with options recognized:$ac_help" - fi - exit 0 ;; - - -host | --host | --hos | --ho) - ac_prev=host ;; - -host=* | --host=* | --hos=* | --ho=*) - host="$ac_optarg" ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir="$ac_optarg" ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir="$ac_optarg" ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir="$ac_optarg" ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir="$ac_optarg" ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst \ - | --locals | --local | --loca | --loc | --lo) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) - localstatedir="$ac_optarg" ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir="$ac_optarg" ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir="$ac_optarg" ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix="$ac_optarg" ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix="$ac_optarg" ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix="$ac_optarg" ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name="$ac_optarg" ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir="$ac_optarg" ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir="$ac_optarg" ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site="$ac_optarg" ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir="$ac_optarg" ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir="$ac_optarg" ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target="$ac_optarg" ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.7" - exit 0 ;; - - -with-* | --with-*) - ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then - { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } - fi - ac_package=`echo $ac_package| sed 's/-/_/g'` - case "$ac_option" in - *=*) ;; - *) ac_optarg=yes ;; - esac - eval "with_${ac_package}='$ac_optarg'" ;; - - -without-* | --without-*) - ac_package=`echo $ac_option|sed -e 's/-*without-//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then - { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } - fi - ac_package=`echo $ac_package| sed 's/-/_/g'` - eval "with_${ac_package}=no" ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes="$ac_optarg" ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries="$ac_optarg" ;; - - -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } - ;; - - *) - if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then - echo "configure: warning: $ac_option: invalid host type" 1>&2 - fi - if test "x$nonopt" != xNONE; then - { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } - fi - nonopt="$ac_option" - ;; - - esac -done - -if test -n "$ac_prev"; then - { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } -fi - -trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - -# File descriptor usage: -# 0 standard input -# 1 file creation -# 2 errors and warnings -# 3 some systems may open it to /dev/tty -# 4 used on the Kubota Titan -# 6 checking for... messages and results -# 5 compiler messages saved in config.log -if test "$silent" = yes; then - exec 6>/dev/null -else - exec 6>&1 -fi -exec 5>./config.log - -echo "\ -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. -" 1>&5 - -# Strip out --no-create and --no-recursion so they do not pile up. -# Also quote any args containing shell metacharacters. -ac_configure_args= -for ac_arg -do - case "$ac_arg" in - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) ;; - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) - ac_configure_args="$ac_configure_args '$ac_arg'" ;; - *) ac_configure_args="$ac_configure_args $ac_arg" ;; - esac -done - -# NLS nuisances. -# Only set LANG and LC_ALL to C if already set. -# These must not be set unconditionally because not all systems understand -# e.g. LANG=C (notably SCO). -if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi -if test "${LANG+set}" = set; then LANG=C; export LANG; fi - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo > confdefs.h - -# A filename unique to this package, relative to the directory that -# configure is in, which we can look for to find out if srcdir is correct. -ac_unique_file=../common/main.c - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then its parent. - ac_prog=$0 - ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` - test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. - srcdir=$ac_confdir - if test ! -r $srcdir/$ac_unique_file; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r $srcdir/$ac_unique_file; then - if test "$ac_srcdir_defaulted" = yes; then - { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } - else - { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } - fi -fi -srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` - -# Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi -fi -for ac_site_file in $CONFIG_SITE; do - if test -r "$ac_site_file"; then - echo "loading site script $ac_site_file" - . "$ac_site_file" - fi -done - -if test -r "$cache_file"; then - echo "loading cache $cache_file" - . $cache_file -else - echo "creating cache $cache_file" - > $cache_file -fi - -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='echo $CPP $CPPFLAGS 1>&5; -$CPP $CPPFLAGS' -ac_compile='echo ${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5; -${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5 2>&5' -ac_link='echo ${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5; -${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5 2>&5' - -if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then - # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. - if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then - ac_n= ac_c=' -' ac_t=' ' - else - ac_n=-n ac_c= ac_t= - fi -else - ac_n= ac_c='\c' ac_t= -fi - - - - -ac_aux_dir= -for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do - if test -f $ac_dir/install-sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f $ac_dir/install.sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - fi -done -if test -z "$ac_aux_dir"; then - { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; } -fi -ac_config_guess=$ac_aux_dir/config.guess -ac_config_sub=$ac_aux_dir/config.sub -ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# ./install, which can be erroneously created by make from ./install.sh. -echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -if test -z "$INSTALL"; then -if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - # Account for people who put trailing slashes in PATH elements. - case "$ac_dir/" in - /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - for ac_prog in ginstall installbsd scoinst install; do - if test -f $ac_dir/$ac_prog; then - if test $ac_prog = install && - grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - # OSF/1 installbsd also uses dspmsg, but is usable. - : - else - ac_cv_path_install="$ac_dir/$ac_prog -c" - break 2 - fi - fi - done - ;; - esac - done - IFS="$ac_save_ifs" - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL="$ac_cv_path_install" - else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the path is relative. - INSTALL="$ac_install_sh" - fi -fi -echo "$ac_t""$INSTALL" 1>&6 - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - - -# Make sure we can run config.sub. -if $ac_config_sub sun4 >/dev/null 2>&1; then : -else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } -fi - -echo $ac_n "checking host system type""... $ac_c" 1>&6 - -host_alias=$host -case "$host_alias" in -NONE) - case $nonopt in - NONE) - if host_alias=`$ac_config_guess`; then : - else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } - fi ;; - *) host_alias=$nonopt ;; - esac ;; -esac - -host=`$ac_config_sub $host_alias` -host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'` -host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'` -host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'` -echo "$ac_t""$host" 1>&6 - -if test "$program_transform_name" = s,x,x,; then - program_transform_name= -else - # Double any \ or $. echo might interpret backslashes. - cat <<\EOF_SED > conftestsed -s,\\,\\\\,g; s,\$,$$,g -EOF_SED - program_transform_name="`echo $program_transform_name|sed -f conftestsed`" - rm -f conftestsed -fi -test "$program_prefix" != NONE && - program_transform_name="s,^,${program_prefix},; $program_transform_name" -# Use a double $ so make ignores it. -test "$program_suffix" != NONE && - program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" - -# sed with no file args requires a program. -test "$program_transform_name" = "" && program_transform_name="s,x,x," - - -echo $ac_n "checking if --enable-debug option specified""... $ac_c" 1>&6 -# Check whether --enable-debug or --disable-debug was given. -if test "${enable_debug+set}" = set; then - enableval="$enable_debug" - vi_cv_debug="yes" -else - vi_cv_debug="no" -fi - -if test "$vi_cv_debug" = yes; then - cat >> confdefs.h <<\EOF -#define DEBUG 1 -EOF - - OPTFLAG=${OPTFLAG-"-g"} - no_op_OPTFLAG=${no_op_OPTFLAG-"-g"} -fi -echo "$ac_t""$vi_cv_debug" 1>&6 - - - -case "$host_os" in -aix3.2.5) OPTFLAG=${OPTFLAG-"-O"};; -aix4.1*) CFLAGS=${CFLAGS-"-qstrict"} - OPTFLAG=${OPTFLAG-"-O3"};; -aux*) CPPFLAGS=${CPPFLAGS-"-ZP -D_BSD_SOURCE -D_SYSV_SOURCE -D_AUX_SOURCE"} - LDFLAGS=${LDFLAGS-"-ZP"} - OPTFLAG=${OPTFLAG-"-O"};; -bsd4.4) OPTFLAG=${OPTFLAG-"-O2"};; -bsdi*) CC=${CC-"shlicc"} - OPTFLAG=${OPTFLAG-"-O2"};; -irix6*) OPTFLAG=${OPTFLAG-"-O2"};; -irix*) OPTFLAG=${OPTFLAG-"-O2"};; -lynxos*) # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="gcc" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_prog_CC" && ac_cv_prog_CC="cc" -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - -echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.c <<EOF -#ifdef __GNUC__ - yes; -#endif -EOF -if ${CC-cc} -E conftest.c 2>&5 | egrep yes >/dev/null 2>&1; then - ac_cv_prog_gcc=yes -else - ac_cv_prog_gcc=no -fi -fi - -echo "$ac_t""$ac_cv_prog_gcc" 1>&6 -if test $ac_cv_prog_gcc = yes; then - GCC=yes - if test "${CFLAGS+set}" != set; then - echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - echo 'void f(){}' > conftest.c -if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then - ac_cv_prog_gcc_g=yes -else - ac_cv_prog_gcc_g=no -fi -rm -f conftest* - -fi - -echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6 - if test $ac_cv_prog_gcc_g = yes; then - CFLAGS="-g -O" - else - CFLAGS="-O" - fi - fi -else - GCC= - test "${CFLAGS+set}" = set || CFLAGS="-g" -fi - - echo $ac_n "checking for GNU C (gcc) version 2.x""... $ac_c" 1>&6 - ac_cv_gcc_vers=`${CC-cc} -v 2>&1 | \ - grep "gcc version " | sed 's/.*version //'` - ac_cv_gcc_major=`echo "$ac_cv_gcc_vers" | sed 's/\..*//'` - if test "$ac_cv_gcc_major" = "2" ; then - echo "$ac_t""yes" 1>&6 - else - echo "$ac_t""no" 1>&6 - echo "Fatal error: Nvi requires gcc 2.x to build on LynxOS." - echo "See build/README.LynxOS for more information." - exit 1 - fi;; -nextstep3) CPPFLAGS=${CPPFLAGS-"-w -pipe -posix"} - LDFLAGS=${LDFLAGS-"-posix"} - OPTFLAG=${OPTFLAG-"-O9"};; -osf*) CFLAGS=${CFLAGS-"-Olimit 1000"};; -solaris*) no_op_OPTFLAG=${no_op_OPTFLAG-""};; -sunos*) no_op_OPTFLAG=${no_op_OPTFLAG-""};; -esac - - -CC=${CC-cc} - - -OPTFLAG=${OPTFLAG-"-O"} - - -no_op_OPTFLAG=${no_op_OPTFLAG-"$OPTFLAG"} - -case "$host_os" in -bsdi2.1) LIBS=${LIBS-"-lipc"};; -dgux*) LIBS=${LIBS-"-ldgc"};; -irix6*) LIBS=${LIBS-"-lbsd"};; -irix*) LIBS=${LIBS-"-lc_s -lbsd"};; -isc*) LIBS=${LIBS-"-lcposix -linet"};; -netbsd1*) LIBS=${LIBS-"-lcrypt"};; -ptx*) LIBS=${LIBS-"-lseq -linet -lsocket"};; -sco3.2*) LIBS=${LIBS-"-lsocket"};; -sinix*) LIBS=${LIBS-"-lelf -lc"};; -solaris*) LIBS=${LIBS-"-lsocket -lnsl -ldl"} - RLIBS=yes;; -wgs*) LIBS=${LIBS-"-lnsl"};; -esac - -case "$host_os" in -aux*) LIBOBJS="getopt.o strpbrk.o $LIBOBJS";; -esac - -case "$host_os" in -ultrix*) cat >> confdefs.h <<\EOF -#define HAVE_BROKEN_VDISABLE 1 -EOF -;; -esac - -CPPFLAGS="$ADDCPPFLAGS $CPPFLAGS" - -LDFLAGS="$ADDLDFLAGS $LDFLAGS" - -LIBS="$ADDLIBS $LIBS" - -# If we cannot run a trivial program, we must be cross compiling. -echo $ac_n "checking whether cross-compiling""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_c_cross'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test "$cross_compiling" = yes; then - ac_cv_c_cross=yes -else -cat > conftest.$ac_ext <<EOF -#line 839 "configure" -#include "confdefs.h" -main(){return(0);} -EOF -eval $ac_link -if test -s conftest && (./conftest; exit) 2>/dev/null; then - ac_cv_c_cross=no -else - ac_cv_c_cross=yes -fi -fi -rm -fr conftest* -fi - -echo "$ac_t""$ac_cv_c_cross" 1>&6 -cross_compiling=$ac_cv_c_cross - -echo $ac_n "checking whether the compiler ($CC $CFLAGS $LDFLAGS) actually works""... $ac_c" 1>&6 - - ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='echo $CPP $CPPFLAGS 1>&5; -$CPP $CPPFLAGS' -ac_compile='echo ${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5; -${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5 2>&5' -ac_link='echo ${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5; -${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5 2>&5' - - if test "$cross_compiling" = yes; then - cat > conftest.$ac_ext <<EOF -#line 869 "configure" -#include "confdefs.h" - -int main() { return 0; } -int t() { - -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - am_cv_prog_cc_works=yes -else - rm -rf conftest* - am_cv_prog_cc_works=no -fi -rm -f conftest* - -else -cat > conftest.$ac_ext <<EOF -#line 888 "configure" -#include "confdefs.h" -main() { exit(0); } -EOF -eval $ac_link -if test -s conftest && (./conftest; exit) 2>/dev/null; then - am_cv_prog_cc_works=yes -else - am_cv_prog_cc_works=no -fi -fi -rm -fr conftest* - -case "$am_cv_prog_cc_works" in - *no) { echo "configure: error: Installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } ;; - *yes) ;; -esac -echo "$ac_t""yes" 1>&6 - - -PATH="$PATH:/usr/bin:/usr/sbin:/sbin:/etc:/usr/etc:/usr/lib:/usr/ucblib:" - -# Extract the first word of "sh", so it can be a program name with args. -set dummy sh; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_path_vi_cv_path_shell'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - case "$vi_cv_path_shell" in - /*) - ac_cv_path_vi_cv_path_shell="$vi_cv_path_shell" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_path_vi_cv_path_shell="$ac_dir/$ac_word" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_vi_cv_path_shell" && ac_cv_path_vi_cv_path_shell="no" - ;; -esac -fi -vi_cv_path_shell="$ac_cv_path_vi_cv_path_shell" -if test -n "$vi_cv_path_shell"; then - echo "$ac_t""$vi_cv_path_shell" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -if test "$vi_cv_path_shell" = no; then - echo "Fatal error: the shell utility not found." - exit 1 -fi - -# Extract the first word of "sendmail", so it can be a program name with args. -set dummy sendmail; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_path_vi_cv_path_sendmail'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - case "$vi_cv_path_sendmail" in - /*) - ac_cv_path_vi_cv_path_sendmail="$vi_cv_path_sendmail" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_path_vi_cv_path_sendmail="$ac_dir/$ac_word" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_vi_cv_path_sendmail" && ac_cv_path_vi_cv_path_sendmail="no" - ;; -esac -fi -vi_cv_path_sendmail="$ac_cv_path_vi_cv_path_sendmail" -if test -n "$vi_cv_path_sendmail"; then - echo "$ac_t""$vi_cv_path_sendmail" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -if test "$vi_cv_path_sendmail" = no; then - echo "WARNING: The sendmail utility was not found!" - echo "WARNING: Users will not be told of saved files." -fi - - -for ac_prog in perl5 perl -do -# Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_path_vi_cv_path_perl'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - case "$vi_cv_path_perl" in - /*) - ac_cv_path_vi_cv_path_perl="$vi_cv_path_perl" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_path_vi_cv_path_perl="$ac_dir/$ac_word" - break - fi - done - IFS="$ac_save_ifs" - ;; -esac -fi -vi_cv_path_perl="$ac_cv_path_vi_cv_path_perl" -if test -n "$vi_cv_path_perl"; then - echo "$ac_t""$vi_cv_path_perl" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -test -n "$vi_cv_path_perl" && break -done -test -n "$vi_cv_path_perl" || vi_cv_path_perl="no" - - - -echo $ac_n "checking for preserve directory""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'vi_cv_path_preserve'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - dirlist="/var/preserve /var/tmp /usr/tmp" - vi_cv_path_preserve=no - for i in $dirlist; do - if test -d $i/vi.recover; then - vi_cv_path_preserve=$i/vi.recover - break; - fi - done - if test "$vi_cv_path_preserve" = no; then - for i in $dirlist; do - if test -d $i -a -w $i; then - vi_cv_path_preserve=$i/vi.recover - break; - fi - done - - fi -fi - -if test "$vi_cv_path_preserve" = no; then - echo "Fatal error: no writeable preserve directory found." - exit 1 -fi -echo "$ac_t""$vi_cv_path_preserve" 1>&6 - -# Extract the first word of "chmod", so it can be a program name with args. -set dummy chmod; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_path_vi_cv_path_chmod'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - case "$vi_cv_path_chmod" in - /*) - ac_cv_path_vi_cv_path_chmod="$vi_cv_path_chmod" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_path_vi_cv_path_chmod="$ac_dir/$ac_word" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_vi_cv_path_chmod" && ac_cv_path_vi_cv_path_chmod="missing_chmod" - ;; -esac -fi -vi_cv_path_chmod="$ac_cv_path_vi_cv_path_chmod" -if test -n "$vi_cv_path_chmod"; then - echo "$ac_t""$vi_cv_path_chmod" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -# Extract the first word of "cp", so it can be a program name with args. -set dummy cp; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_path_vi_cv_path_cp'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - case "$vi_cv_path_cp" in - /*) - ac_cv_path_vi_cv_path_cp="$vi_cv_path_cp" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_path_vi_cv_path_cp="$ac_dir/$ac_word" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_vi_cv_path_cp" && ac_cv_path_vi_cv_path_cp="missing_cp" - ;; -esac -fi -vi_cv_path_cp="$ac_cv_path_vi_cv_path_cp" -if test -n "$vi_cv_path_cp"; then - echo "$ac_t""$vi_cv_path_cp" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -# Extract the first word of "ln", so it can be a program name with args. -set dummy ln; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_path_vi_cv_path_ln'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - case "$vi_cv_path_ln" in - /*) - ac_cv_path_vi_cv_path_ln="$vi_cv_path_ln" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_path_vi_cv_path_ln="$ac_dir/$ac_word" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_vi_cv_path_ln" && ac_cv_path_vi_cv_path_ln="missing_ln" - ;; -esac -fi -vi_cv_path_ln="$ac_cv_path_vi_cv_path_ln" -if test -n "$vi_cv_path_ln"; then - echo "$ac_t""$vi_cv_path_ln" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -# Extract the first word of "mkdir", so it can be a program name with args. -set dummy mkdir; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_path_vi_cv_path_mkdir'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - case "$vi_cv_path_mkdir" in - /*) - ac_cv_path_vi_cv_path_mkdir="$vi_cv_path_mkdir" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_path_vi_cv_path_mkdir="$ac_dir/$ac_word" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_vi_cv_path_mkdir" && ac_cv_path_vi_cv_path_mkdir="missing_mkdir" - ;; -esac -fi -vi_cv_path_mkdir="$ac_cv_path_vi_cv_path_mkdir" -if test -n "$vi_cv_path_mkdir"; then - echo "$ac_t""$vi_cv_path_mkdir" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -# Extract the first word of "rm", so it can be a program name with args. -set dummy rm; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_path_vi_cv_path_rm'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - case "$vi_cv_path_rm" in - /*) - ac_cv_path_vi_cv_path_rm="$vi_cv_path_rm" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_path_vi_cv_path_rm="$ac_dir/$ac_word" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_vi_cv_path_rm" && ac_cv_path_vi_cv_path_rm="missing_rm" - ;; -esac -fi -vi_cv_path_rm="$ac_cv_path_vi_cv_path_rm" -if test -n "$vi_cv_path_rm"; then - echo "$ac_t""$vi_cv_path_rm" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -# Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_path_vi_cv_path_strip'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - case "$vi_cv_path_strip" in - /*) - ac_cv_path_vi_cv_path_strip="$vi_cv_path_strip" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_path_vi_cv_path_strip="$ac_dir/$ac_word" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_vi_cv_path_strip" && ac_cv_path_vi_cv_path_strip="missing_strip" - ;; -esac -fi -vi_cv_path_strip="$ac_cv_path_vi_cv_path_strip" -if test -n "$vi_cv_path_strip"; then - echo "$ac_t""$vi_cv_path_strip" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - -echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then -if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - # This must be in double quotes, not single quotes, because CPP may get - # substituted into the Makefile and "${CC-cc}" will confuse make. - CPP="${CC-cc} -E" - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. - cat > conftest.$ac_ext <<EOF -#line 1252 "configure" -#include "confdefs.h" -#include <assert.h> -Syntax Error -EOF -eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - : -else - echo "$ac_err" >&5 - rm -rf conftest* - CPP="${CC-cc} -E -traditional-cpp" - cat > conftest.$ac_ext <<EOF -#line 1266 "configure" -#include "confdefs.h" -#include <assert.h> -Syntax Error -EOF -eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - : -else - echo "$ac_err" >&5 - rm -rf conftest* - CPP=/lib/cpp -fi -rm -f conftest* -fi -rm -f conftest* - ac_cv_prog_CPP="$CPP" -fi - CPP="$ac_cv_prog_CPP" -else - ac_cv_prog_CPP="$CPP" -fi -echo "$ac_t""$CPP" 1>&6 - -# If we find X, set shell vars x_includes and x_libraries to the -# paths, otherwise set no_x=yes. -# Uses ac_ vars as temps to allow command line to override cache and checks. -# --without-x overrides everything else, but does not touch the cache. -echo $ac_n "checking for X""... $ac_c" 1>&6 - -# Check whether --with-x or --without-x was given. -if test "${with_x+set}" = set; then - withval="$with_x" - : -fi - -if test "x$with_x" = xno; then - no_x=yes -else - if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then - no_x= - else -if eval "test \"`echo '$''{'ac_cv_path_x'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - # One or both of the vars are not set, and there is no cached value. -no_x=yes -rm -fr conftestdir -if mkdir conftestdir; then - cd conftestdir - # Make sure to not put "make" in the Imakefile rules, since we grep it out. - cat > Imakefile <<'EOF' -acfindx: - @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"' -EOF - if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then - no_x= - # GNU make sometimes prints "make[1]: Entering...", which would confuse us. - eval `${MAKE-make} acfindx 2>/dev/null | grep -v make` - # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. - for ac_extension in a so sl; do - if test ! -f $ac_im_usrlibdir/libX11.$ac_extension && - test -f $ac_im_libdir/libX11.$ac_extension; then - ac_im_usrlibdir=$ac_im_libdir; break - fi - done - # Screen out bogus values from the imake configuration. - case "$ac_im_incroot" in - /usr/include) ;; - *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;; - esac - case "$ac_im_usrlibdir" in - /usr/lib | /lib) ;; - *) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;; - esac - fi - cd .. - rm -fr conftestdir -fi - -if test "$no_x" = yes; then -test -z "$x_direct_test_library" && x_direct_test_library=Xt -test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc -test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h -cat > conftest.$ac_ext <<EOF -#line 1352 "configure" -#include "confdefs.h" -#include <$x_direct_test_include> -EOF -eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - rm -rf conftest* - no_x= ac_x_includes= -else - echo "$ac_err" >&5 - rm -rf conftest* - for ac_dir in \ - /usr/X11R6/include \ - /usr/X11R5/include \ - /usr/X11R4/include \ - \ - /usr/include/X11R6 \ - /usr/include/X11R5 \ - /usr/include/X11R4 \ - \ - /usr/local/X11R6/include \ - /usr/local/X11R5/include \ - /usr/local/X11R4/include \ - \ - /usr/local/include/X11R6 \ - /usr/local/include/X11R5 \ - /usr/local/include/X11R4 \ - \ - /usr/X11/include \ - /usr/include/X11 \ - /usr/local/X11/include \ - /usr/local/include/X11 \ - \ - /usr/X386/include \ - /usr/x386/include \ - /usr/XFree86/include/X11 \ - \ - /usr/include \ - /usr/local/include \ - /usr/unsupported/include \ - /usr/athena/include \ - /usr/local/x11r5/include \ - /usr/lpp/Xamples/include \ - \ - /usr/openwin/include \ - /usr/openwin/share/include \ - ; \ - do - if test -r "$ac_dir/$x_direct_test_include"; then - no_x= ac_x_includes=$ac_dir - break - fi - done -fi -rm -f conftest* - -# Check for the libraries. -# See if we find them without any special options. -# Don't add to $LIBS permanently. -ac_save_LIBS="$LIBS" -LIBS="-l$x_direct_test_library $LIBS" -cat > conftest.$ac_ext <<EOF -#line 1415 "configure" -#include "confdefs.h" - -int main() { return 0; } -int t() { -${x_direct_test_function}() -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - LIBS="$ac_save_LIBS" no_x= ac_x_libraries= -else - rm -rf conftest* - LIBS="$ac_save_LIBS" -# First see if replacing the include by lib works. -for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \ - /usr/X11R6/lib \ - /usr/X11R5/lib \ - /usr/X11R4/lib \ - \ - /usr/lib/X11R6 \ - /usr/lib/X11R5 \ - /usr/lib/X11R4 \ - \ - /usr/local/X11R6/lib \ - /usr/local/X11R5/lib \ - /usr/local/X11R4/lib \ - \ - /usr/local/lib/X11R6 \ - /usr/local/lib/X11R5 \ - /usr/local/lib/X11R4 \ - \ - /usr/X11/lib \ - /usr/lib/X11 \ - /usr/local/X11/lib \ - /usr/local/lib/X11 \ - \ - /usr/X386/lib \ - /usr/x386/lib \ - /usr/XFree86/lib/X11 \ - \ - /usr/lib \ - /usr/local/lib \ - /usr/unsupported/lib \ - /usr/athena/lib \ - /usr/local/x11r5/lib \ - /usr/lpp/Xamples/lib \ - \ - /usr/openwin/lib \ - /usr/openwin/share/lib \ - ; \ -do - for ac_extension in a so sl; do - if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then - no_x= ac_x_libraries=$ac_dir - break 2 - fi - done -done -fi -rm -f conftest* - -fi -if test "$no_x" = yes; then - ac_cv_path_x="no_x=yes" -else - ac_cv_path_x="no_x= ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries" -fi -fi - fi - eval "$ac_cv_path_x" -fi # $with_x != no - -if test "$no_x" = yes; then - echo "$ac_t""no" 1>&6 -else - test "x$x_includes" = xNONE && x_includes=$ac_x_includes - test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries - ac_cv_path_x="no_x= ac_x_includes=$x_includes ac_x_libraries=$x_libraries" - echo "$ac_t""libraries $x_libraries, headers $x_includes" 1>&6 -fi - - -if test "$no_x" != yes; then - if test "X$x_libraries" != "X"; then - if test "X$RLIBS" = "Xyes"; then - XLIBS="-R$x_libraries -L$x_libraries $XLIBS" - else - XLIBS="-L$x_libraries $XLIBS" - fi - fi - XLIBS="$XLIBS -lX11" - if test "X$x_includes" != "X"; then - XINCS="-I$x_includes" - fi -fi - - - -echo $ac_n "checking if --enable-perlinterp option specified""... $ac_c" 1>&6 -# Check whether --enable-perlinterp or --disable-perlinterp was given. -if test "${enable_perlinterp+set}" = set; then - enableval="$enable_perlinterp" - vi_cv_perlinterp="yes" -else - vi_cv_perlinterp="no" -fi - -echo "$ac_t""$vi_cv_perlinterp" 1>&6 -if test "$vi_cv_perlinterp" = "yes"; then - if test "$vi_cv_path_perl" = no; then - echo "Fatal error: no perl5 utility found." - exit 1 - fi - $vi_cv_path_perl -e 'require 5.002' || { - echo "Fatal error: perl5 must be version 5.002 or later." - exit 1 - } - $vi_cv_path_perl -e 'close(STDERR);require 5.003_01' && - cat >> confdefs.h <<\EOF -#define HAVE_PERL_5_003_01 1 -EOF - - - eval `$vi_cv_path_perl -V:shrpenv` - if test "X$shrpenv" = "XUNKNOWN"; then # pre 5.003_04 - shrpenv="" - fi - vi_cv_perllib=`$vi_cv_path_perl -MConfig -e 'print $Config{privlib}'` - perlcppflags=`$vi_cv_path_perl -Mlib=$srcdir -MExtUtils::Embed \ - -e 'ccflags;perl_inc'` - if test "X$perlcppflags" != "X"; then - CPPFLAGS="$perlcppflags $CPPFLAGS" - fi - perllibs=`cd $srcdir;$vi_cv_path_perl -MExtUtils::Embed \ - -e 'ldopts'` - if test "X$perllibs" != "X"; then - LIBS="$perllibs $LIBS" - fi - perlldflags=`cd $srcdir;$vi_cv_path_perl -MExtUtils::Embed \ - -e 'ccdlflags'` - if test "X$perlldflags" != "X"; then - LDFLAGS="$perlldflags $LDFLAGS" - fi - LIBOBJS="perl.o perlsfio.o $LIBOBJS" - cat >> confdefs.h <<\EOF -#define HAVE_PERL_INTERP 1 -EOF - -fi - - - -echo $ac_n "checking if --enable-tknvi option specified""... $ac_c" 1>&6 -# Check whether --enable-tknvi or --disable-tknvi was given. -if test "${enable_tknvi+set}" = set; then - enableval="$enable_tknvi" - vi_cv_tknvi="yes" -else - vi_cv_tknvi="no" -fi - -echo "$ac_t""$vi_cv_tknvi" 1>&6 -if test "$vi_cv_tknvi" = "yes"; then - tknvi=tknvi - TKLIBS="-ltk -ltcl -lm $XLIBS $LIBS" -fi - -echo $ac_n "checking if --enable-tclinterp option specified""... $ac_c" 1>&6 -# Check whether --enable-tclinterp or --disable-tclinterp was given. -if test "${enable_tclinterp+set}" = set; then - enableval="$enable_tclinterp" - vi_cv_tclinterp="yes" -else - vi_cv_tclinterp="no" -fi - -echo "$ac_t""$vi_cv_tclinterp" 1>&6 -if test "$vi_cv_tclinterp" = "yes"; then - LIBOBJS="tcl.o $LIBOBJS" - LIBS="-ltk -ltcl -lm $XLIBS $LIBS" - cat >> confdefs.h <<\EOF -#define HAVE_TCL_INTERP 1 -EOF - -fi - -if test "$vi_cv_tknvi" = "yes" || test "$vi_cv_tclinterp" = "yes"; then - echo $ac_n "checking for -ltcl""... $ac_c" 1>&6 -ac_lib_var=`echo tcl | tr '.-/+' '___p'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-ltcl -ltk -lm $LIBS" -cat > conftest.$ac_ext <<EOF -#line 1611 "configure" -#include "confdefs.h" - -int main() { return 0; } -int t() { -main() -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - vi_cv_tkfatal="no" -else - echo "$ac_t""no" 1>&6 -vi_cv_tkfatal="yes" -fi - - if test "$vi_cv_tkfatal" = "yes"; then - echo "Fatal error: no Tk/Tcl library; see the section" - echo "ADDING LIBRARIES AND INCLUDE FILES in the README file." - exit 1 - fi -fi - -if test "$vi_cv_tclinterp" = yes || test "$vi_cv_perlinterp" = yes; then - LIBOBJS="api.o $LIBOBJS" -fi - -echo $ac_n "checking for -ltermlib""... $ac_c" 1>&6 -ac_lib_var=`echo termlib | tr '.-/+' '___p'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-ltermlib $LIBS" -cat > conftest.$ac_ext <<EOF -#line 1657 "configure" -#include "confdefs.h" - -int main() { return 0; } -int t() { -tgetent() -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - vi_cv_termlib=-ltermlib -else - echo "$ac_t""no" 1>&6 -vi_cv_termlib=no -fi - -if test "$vi_cv_termlib" = no; then - echo $ac_n "checking for -ltermcap""... $ac_c" 1>&6 -ac_lib_var=`echo termcap | tr '.-/+' '___p'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-ltermcap $LIBS" -cat > conftest.$ac_ext <<EOF -#line 1693 "configure" -#include "confdefs.h" - -int main() { return 0; } -int t() { -tgetent() -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - vi_cv_termlib=-ltermcap -else - echo "$ac_t""no" 1>&6 -vi_cv_termlib=no -fi - -fi -if test "$vi_cv_termlib" != no; then - LIBS="$vi_cv_termlib $LIBS" -fi - -echo $ac_n "checking if --disable-curses option specified""... $ac_c" 1>&6 -# Check whether --enable-curses or --disable-curses was given. -if test "${enable_curses+set}" = set; then - enableval="$enable_curses" - vi_cv_curses="other curses" -else - vi_cv_curses="bundled curses" -fi - -echo "$ac_t""$vi_cv_curses" 1>&6 -case "$vi_cv_curses" in -"bundled curses") - CPPFLAGS="-I\$(srcdir)/curses $CPPFLAGS" - cobjs="\$(COBJS)";; -"other curses") - LIBS="-lcurses $LIBS";; -esac - -echo $ac_n "checking for sys/mman.h""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'vi_cv_include_sys_mman'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 1748 "configure" -#include "confdefs.h" -#include <sys/mman.h> -EOF -eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - rm -rf conftest* - vi_cv_include_sys_mman=yes -else - echo "$ac_err" >&5 - rm -rf conftest* - vi_cv_include_sys_mman=no -fi -rm -f conftest* -fi - -if test "$vi_cv_include_sys_mman" = yes; then - cat >> confdefs.h <<\EOF -#define HAVE_SYS_MMAN_H 1 -EOF - -fi -echo "$ac_t""$vi_cv_include_sys_mman" 1>&6 - -echo $ac_n "checking for sys/select.h""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'vi_cv_include_sys_select'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 1778 "configure" -#include "confdefs.h" -#include <sys/select.h> -EOF -eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - rm -rf conftest* - vi_cv_include_sys_select=yes -else - echo "$ac_err" >&5 - rm -rf conftest* - vi_cv_include_sys_select=no -fi -rm -f conftest* -fi - -if test "$vi_cv_include_sys_select" = yes; then - cat >> confdefs.h <<\EOF -#define HAVE_SYS_SELECT_H 1 -EOF - -fi -echo "$ac_t""$vi_cv_include_sys_select" 1>&6 - -echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 1808 "configure" -#include "confdefs.h" -#include <stdlib.h> -#include <stdarg.h> -#include <string.h> -#include <float.h> -EOF -eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - rm -rf conftest* - ac_cv_header_stdc=yes -else - echo "$ac_err" >&5 - rm -rf conftest* - ac_cv_header_stdc=no -fi -rm -f conftest* - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. -cat > conftest.$ac_ext <<EOF -#line 1830 "configure" -#include "confdefs.h" -#include <string.h> -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "memchr" >/dev/null 2>&1; then - : -else - rm -rf conftest* - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. -cat > conftest.$ac_ext <<EOF -#line 1848 "configure" -#include "confdefs.h" -#include <stdlib.h> -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "free" >/dev/null 2>&1; then - : -else - rm -rf conftest* - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. -if test "$cross_compiling" = yes; then - : -else -cat > conftest.$ac_ext <<EOF -#line 1869 "configure" -#include "confdefs.h" -#include <ctype.h> -#define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int main () { int i; for (i = 0; i < 256; i++) -if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); -exit (0); } - -EOF -eval $ac_link -if test -s conftest && (./conftest; exit) 2>/dev/null; then - : -else - ac_cv_header_stdc=no -fi -fi -rm -fr conftest* -fi -fi - -echo "$ac_t""$ac_cv_header_stdc" 1>&6 -if test $ac_cv_header_stdc = yes; then - cat >> confdefs.h <<\EOF -#define STDC_HEADERS 1 -EOF - -fi - -echo $ac_n "checking for ssize_t""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_type_ssize_t'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 1904 "configure" -#include "confdefs.h" -#include <sys/types.h> -#if STDC_HEADERS -#include <stdlib.h> -#endif -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "ssize_t" >/dev/null 2>&1; then - rm -rf conftest* - ac_cv_type_ssize_t=yes -else - rm -rf conftest* - ac_cv_type_ssize_t=no -fi -rm -f conftest* - -fi -echo "$ac_t""$ac_cv_type_ssize_t" 1>&6 -if test $ac_cv_type_ssize_t = no; then - cat >> confdefs.h <<\EOF -#define ssize_t int -EOF - -fi - -echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_cv_c_bigendian=unknown -# See if sys/param.h defines the BYTE_ORDER macro. -cat > conftest.$ac_ext <<EOF -#line 1937 "configure" -#include "confdefs.h" -#include <sys/types.h> -#include <sys/param.h> -int main() { return 0; } -int t() { - -#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN - bogus endian macros -#endif -; return 0; } -EOF -if eval $ac_compile; then - rm -rf conftest* - # It does; now see whether it defined to BIG_ENDIAN or not. -cat > conftest.$ac_ext <<EOF -#line 1953 "configure" -#include "confdefs.h" -#include <sys/types.h> -#include <sys/param.h> -int main() { return 0; } -int t() { - -#if BYTE_ORDER != BIG_ENDIAN - not big endian -#endif -; return 0; } -EOF -if eval $ac_compile; then - rm -rf conftest* - ac_cv_c_bigendian=yes -else - rm -rf conftest* - ac_cv_c_bigendian=no -fi -rm -f conftest* - -fi -rm -f conftest* - -if test $ac_cv_c_bigendian = unknown; then -if test "$cross_compiling" = yes; then - { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } -else -cat > conftest.$ac_ext <<EOF -#line 1982 "configure" -#include "confdefs.h" -main () { - /* Are we little or big endian? From Harbison&Steele. */ - union - { - long l; - char c[sizeof (long)]; - } u; - u.l = 1; - exit (u.c[sizeof (long) - 1] == 1); -} -EOF -eval $ac_link -if test -s conftest && (./conftest; exit) 2>/dev/null; then - ac_cv_c_bigendian=no -else - ac_cv_c_bigendian=yes -fi -fi -rm -fr conftest* -fi -fi - -echo "$ac_t""$ac_cv_c_bigendian" 1>&6 -if test $ac_cv_c_bigendian = yes; then - cat >> confdefs.h <<\EOF -#define WORDS_BIGENDIAN 1 -EOF - -fi - -echo $ac_n "checking for working const""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 2019 "configure" -#include "confdefs.h" - -int main() { return 0; } -int t() { - -/* Ultrix mips cc rejects this. */ -typedef int charset[2]; const charset x; -/* SunOS 4.1.1 cc rejects this. */ -char const *const *ccp; -char **p; -/* NEC SVR4.0.2 mips cc rejects this. */ -struct point {int x, y;}; -static struct point const zero = {0,0}; -/* AIX XL C 1.02.0.0 rejects this. - It does not let you subtract one const X* pointer from another in an arm - of an if-expression whose if-part is not a constant expression */ -const char *g = "string"; -ccp = &g + (g ? g-g : 0); -/* HPUX 7.0 cc rejects these. */ -++ccp; -p = (char**) ccp; -ccp = (char const *const *) p; -{ /* SCO 3.2v4 cc rejects this. */ - char *t; - char const *s = 0 ? (char *) 0 : (char const *) 0; - - *t++ = 0; -} -{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ - int x[] = {25, 17}; - const int *foo = &x[0]; - ++foo; -} -{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ - typedef const int *iptr; - iptr p = 0; - ++p; -} -{ /* AIX XL C 1.02.0.0 rejects this saying - "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ - struct s { int j; const int *ap[3]; }; - struct s *b; b->j = 5; -} -{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ - const int foo = 10; -} - -; return 0; } -EOF -if eval $ac_compile; then - rm -rf conftest* - ac_cv_c_const=yes -else - rm -rf conftest* - ac_cv_c_const=no -fi -rm -f conftest* - -fi - -echo "$ac_t""$ac_cv_c_const" 1>&6 -if test $ac_cv_c_const = no; then - cat >> confdefs.h <<\EOF -#define const -EOF - -fi - -echo $ac_n "checking for st_blksize in struct stat""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_struct_st_blksize'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 2093 "configure" -#include "confdefs.h" -#include <sys/types.h> -#include <sys/stat.h> -int main() { return 0; } -int t() { -struct stat s; s.st_blksize; -; return 0; } -EOF -if eval $ac_compile; then - rm -rf conftest* - ac_cv_struct_st_blksize=yes -else - rm -rf conftest* - ac_cv_struct_st_blksize=no -fi -rm -f conftest* - -fi - -echo "$ac_t""$ac_cv_struct_st_blksize" 1>&6 -if test $ac_cv_struct_st_blksize = yes; then - cat >> confdefs.h <<\EOF -#define HAVE_ST_BLKSIZE 1 -EOF - -fi - -echo $ac_n "checking for mode_t""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_type_mode_t'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 2126 "configure" -#include "confdefs.h" -#include <sys/types.h> -#if STDC_HEADERS -#include <stdlib.h> -#endif -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "mode_t" >/dev/null 2>&1; then - rm -rf conftest* - ac_cv_type_mode_t=yes -else - rm -rf conftest* - ac_cv_type_mode_t=no -fi -rm -f conftest* - -fi -echo "$ac_t""$ac_cv_type_mode_t" 1>&6 -if test $ac_cv_type_mode_t = no; then - cat >> confdefs.h <<\EOF -#define mode_t int -EOF - -fi - -echo $ac_n "checking for off_t""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 2157 "configure" -#include "confdefs.h" -#include <sys/types.h> -#if STDC_HEADERS -#include <stdlib.h> -#endif -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "off_t" >/dev/null 2>&1; then - rm -rf conftest* - ac_cv_type_off_t=yes -else - rm -rf conftest* - ac_cv_type_off_t=no -fi -rm -f conftest* - -fi -echo "$ac_t""$ac_cv_type_off_t" 1>&6 -if test $ac_cv_type_off_t = no; then - cat >> confdefs.h <<\EOF -#define off_t long -EOF - -fi - -echo $ac_n "checking for pid_t""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 2188 "configure" -#include "confdefs.h" -#include <sys/types.h> -#if STDC_HEADERS -#include <stdlib.h> -#endif -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "pid_t" >/dev/null 2>&1; then - rm -rf conftest* - ac_cv_type_pid_t=yes -else - rm -rf conftest* - ac_cv_type_pid_t=no -fi -rm -f conftest* - -fi -echo "$ac_t""$ac_cv_type_pid_t" 1>&6 -if test $ac_cv_type_pid_t = no; then - cat >> confdefs.h <<\EOF -#define pid_t int -EOF - -fi - -echo $ac_n "checking for size_t""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 2219 "configure" -#include "confdefs.h" -#include <sys/types.h> -#if STDC_HEADERS -#include <stdlib.h> -#endif -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "size_t" >/dev/null 2>&1; then - rm -rf conftest* - ac_cv_type_size_t=yes -else - rm -rf conftest* - ac_cv_type_size_t=no -fi -rm -f conftest* - -fi -echo "$ac_t""$ac_cv_type_size_t" 1>&6 -if test $ac_cv_type_size_t = no; then - cat >> confdefs.h <<\EOF -#define size_t unsigned -EOF - -fi - -echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 2250 "configure" -#include "confdefs.h" -#include <sys/types.h> -#include <time.h> -int main() { return 0; } -int t() { -struct tm *tp; tp->tm_sec; -; return 0; } -EOF -if eval $ac_compile; then - rm -rf conftest* - ac_cv_struct_tm=time.h -else - rm -rf conftest* - ac_cv_struct_tm=sys/time.h -fi -rm -f conftest* - -fi - -echo "$ac_t""$ac_cv_struct_tm" 1>&6 -if test $ac_cv_struct_tm = sys/time.h; then - cat >> confdefs.h <<\EOF -#define TM_IN_SYS_TIME 1 -EOF - -fi - - - for ac_func in bsearch gethostname getopt memchr memcpy memmove memset -do -echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 2286 "configure" -#include "confdefs.h" -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func(); below. */ -#include <assert.h> -/* Override any gcc2 internal prototype to avoid an error. */ -char $ac_func(); - -int main() { return 0; } -int t() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -choke me -#else -$ac_func(); -#endif - -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - eval "ac_cv_func_$ac_func=yes" -else - rm -rf conftest* - eval "ac_cv_func_$ac_func=no" -fi -rm -f conftest* - -fi -if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` - cat >> confdefs.h <<EOF -#define $ac_tr_func 1 -EOF - -else - echo "$ac_t""no" 1>&6 -fi -done - -for ac_func in bsearch gethostname getopt memchr memcpy memmove memset -do -echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 2337 "configure" -#include "confdefs.h" -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func(); below. */ -#include <assert.h> -/* Override any gcc2 internal prototype to avoid an error. */ -char $ac_func(); - -int main() { return 0; } -int t() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -choke me -#else -$ac_func(); -#endif - -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - eval "ac_cv_func_$ac_func=yes" -else - rm -rf conftest* - eval "ac_cv_func_$ac_func=no" -fi -rm -f conftest* - -fi -if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then - echo "$ac_t""yes" 1>&6 - : -else - echo "$ac_t""no" 1>&6 -LIBOBJS="$LIBOBJS ${ac_func}.o" -fi - -done - - for ac_func in mkstemp mmap snprintf strdup strerror strpbrk strtol -do -echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 2386 "configure" -#include "confdefs.h" -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func(); below. */ -#include <assert.h> -/* Override any gcc2 internal prototype to avoid an error. */ -char $ac_func(); - -int main() { return 0; } -int t() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -choke me -#else -$ac_func(); -#endif - -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - eval "ac_cv_func_$ac_func=yes" -else - rm -rf conftest* - eval "ac_cv_func_$ac_func=no" -fi -rm -f conftest* - -fi -if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` - cat >> confdefs.h <<EOF -#define $ac_tr_func 1 -EOF - -else - echo "$ac_t""no" 1>&6 -fi -done - -for ac_func in mkstemp mmap snprintf strdup strerror strpbrk strtol -do -echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 2437 "configure" -#include "confdefs.h" -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func(); below. */ -#include <assert.h> -/* Override any gcc2 internal prototype to avoid an error. */ -char $ac_func(); - -int main() { return 0; } -int t() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -choke me -#else -$ac_func(); -#endif - -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - eval "ac_cv_func_$ac_func=yes" -else - rm -rf conftest* - eval "ac_cv_func_$ac_func=no" -fi -rm -f conftest* - -fi -if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then - echo "$ac_t""yes" 1>&6 - : -else - echo "$ac_t""no" 1>&6 -LIBOBJS="$LIBOBJS ${ac_func}.o" -fi - -done - - for ac_func in strtoul vsnprintf -do -echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 2486 "configure" -#include "confdefs.h" -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func(); below. */ -#include <assert.h> -/* Override any gcc2 internal prototype to avoid an error. */ -char $ac_func(); - -int main() { return 0; } -int t() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -choke me -#else -$ac_func(); -#endif - -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - eval "ac_cv_func_$ac_func=yes" -else - rm -rf conftest* - eval "ac_cv_func_$ac_func=no" -fi -rm -f conftest* - -fi -if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` - cat >> confdefs.h <<EOF -#define $ac_tr_func 1 -EOF - -else - echo "$ac_t""no" 1>&6 -fi -done - -for ac_func in strtoul vsnprintf -do -echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 2537 "configure" -#include "confdefs.h" -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func(); below. */ -#include <assert.h> -/* Override any gcc2 internal prototype to avoid an error. */ -char $ac_func(); - -int main() { return 0; } -int t() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -choke me -#else -$ac_func(); -#endif - -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - eval "ac_cv_func_$ac_func=yes" -else - rm -rf conftest* - eval "ac_cv_func_$ac_func=no" -fi -rm -f conftest* - -fi -if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then - echo "$ac_t""yes" 1>&6 - : -else - echo "$ac_t""no" 1>&6 -LIBOBJS="$LIBOBJS ${ac_func}.o" -fi - -done - - -for ac_func in select -do -echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 2587 "configure" -#include "confdefs.h" -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func(); below. */ -#include <assert.h> -/* Override any gcc2 internal prototype to avoid an error. */ -char $ac_func(); - -int main() { return 0; } -int t() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -choke me -#else -$ac_func(); -#endif - -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - eval "ac_cv_func_$ac_func=yes" -else - rm -rf conftest* - eval "ac_cv_func_$ac_func=no" -fi -rm -f conftest* - -fi -if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` - cat >> confdefs.h <<EOF -#define $ac_tr_func 1 -EOF - -else - echo "$ac_t""no" 1>&6 -fi -done - -for ac_func in setenv -do -echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 2638 "configure" -#include "confdefs.h" -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func(); below. */ -#include <assert.h> -/* Override any gcc2 internal prototype to avoid an error. */ -char $ac_func(); - -int main() { return 0; } -int t() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -choke me -#else -$ac_func(); -#endif - -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - eval "ac_cv_func_$ac_func=yes" -else - rm -rf conftest* - eval "ac_cv_func_$ac_func=no" -fi -rm -f conftest* - -fi -if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` - cat >> confdefs.h <<EOF -#define $ac_tr_func 1 -EOF - need_env=no -else - echo "$ac_t""no" 1>&6 -need_env=yes -fi -done - -for ac_func in strsep -do -echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 2690 "configure" -#include "confdefs.h" -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func(); below. */ -#include <assert.h> -/* Override any gcc2 internal prototype to avoid an error. */ -char $ac_func(); - -int main() { return 0; } -int t() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -choke me -#else -$ac_func(); -#endif - -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - eval "ac_cv_func_$ac_func=yes" -else - rm -rf conftest* - eval "ac_cv_func_$ac_func=no" -fi -rm -f conftest* - -fi -if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` - cat >> confdefs.h <<EOF -#define $ac_tr_func 1 -EOF - need_strsep=no -else - echo "$ac_t""no" 1>&6 -need_strsep=yes -fi -done - -for ac_func in unsetenv -do -echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 2742 "configure" -#include "confdefs.h" -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func(); below. */ -#include <assert.h> -/* Override any gcc2 internal prototype to avoid an error. */ -char $ac_func(); - -int main() { return 0; } -int t() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -choke me -#else -$ac_func(); -#endif - -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - eval "ac_cv_func_$ac_func=yes" -else - rm -rf conftest* - eval "ac_cv_func_$ac_func=no" -fi -rm -f conftest* - -fi -if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` - cat >> confdefs.h <<EOF -#define $ac_tr_func 1 -EOF - -else - echo "$ac_t""no" 1>&6 -need_env=yes -fi -done - - -for ac_func in valloc getpagesize -do -echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 2795 "configure" -#include "confdefs.h" -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func(); below. */ -#include <assert.h> -/* Override any gcc2 internal prototype to avoid an error. */ -char $ac_func(); - -int main() { return 0; } -int t() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -choke me -#else -$ac_func(); -#endif - -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - eval "ac_cv_func_$ac_func=yes" -else - rm -rf conftest* - eval "ac_cv_func_$ac_func=no" -fi -rm -f conftest* - -fi -if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` - cat >> confdefs.h <<EOF -#define $ac_tr_func 1 -EOF - -else - echo "$ac_t""no" 1>&6 -fi -done - -echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_func_mmap'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test "$cross_compiling" = yes; then - ac_cv_func_mmap=no -else -cat > conftest.$ac_ext <<EOF -#line 2847 "configure" -#include "confdefs.h" - -/* Thanks to Mike Haertel and Jim Avera for this test. */ -#include <sys/types.h> -#include <fcntl.h> -#include <sys/mman.h> - -#ifndef HAVE_GETPAGESIZE -# include <sys/param.h> -# ifdef EXEC_PAGESIZE -# define getpagesize() EXEC_PAGESIZE -# else -# ifdef NBPG -# define getpagesize() NBPG * CLSIZE -# ifndef CLSIZE -# define CLSIZE 1 -# endif -# else -# ifdef NBPC -# define getpagesize() NBPC -# else -# define getpagesize() PAGESIZE /* SVR4 */ -# endif -# endif -# endif -#endif - -#ifndef HAVE_VALLOC -# define valloc malloc -#endif - -#ifdef __cplusplus -extern "C" { void *valloc(unsigned), *malloc(unsigned); } -#else -char *valloc(), *malloc(); -#endif - -int -main() -{ - char *buf1, *buf2, *buf3; - int i = getpagesize(), j; - int i2 = i * 2; - int fd; - - buf1 = (char *)valloc(i2); - buf2 = (char *)valloc(i); - buf3 = (char *)malloc(i2); - for (j = 0; j < i2; ++j) - *(buf1 + j) = rand(); - fd = open("conftestmmap", O_CREAT | O_RDWR, 0666); - write(fd, buf1, i2); - mmap(buf2, i, PROT_READ | PROT_WRITE, MAP_FIXED | MAP_PRIVATE, fd, 0); - for (j = 0; j < i; ++j) - if (*(buf1 + j) != *(buf2 + j)) - exit(1); - lseek(fd, (long)i, 0); - read(fd, buf2, i); /* read into mapped memory -- file should not change */ - /* (it does in i386 SVR4.0 - Jim Avera, jima@netcom.com) */ - lseek(fd, (long)0, 0); - read(fd, buf3, i2); - for (j = 0; j < i2; ++j) - if (*(buf1 + j) != *(buf3 + j)) - exit(1); - exit(0); -} - -EOF -eval $ac_link -if test -s conftest && (./conftest; exit) 2>/dev/null; then - ac_cv_func_mmap=yes -else - ac_cv_func_mmap=no -fi -fi -rm -fr conftest* -fi - -echo "$ac_t""$ac_cv_func_mmap" 1>&6 -if test $ac_cv_func_mmap = yes; then - cat >> confdefs.h <<\EOF -#define HAVE_MMAP 1 -EOF - -fi - -ac_safe=`echo "vfork.h" | tr './\055' '___'` -echo $ac_n "checking for vfork.h""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 2940 "configure" -#include "confdefs.h" -#include <vfork.h> -EOF -eval "$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - cat >> confdefs.h <<\EOF -#define HAVE_VFORK_H 1 -EOF - -else - echo "$ac_t""no" 1>&6 -fi - -echo $ac_n "checking for working vfork""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test "$cross_compiling" = yes; then - echo $ac_n "checking for vfork""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 2976 "configure" -#include "confdefs.h" -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char vfork(); below. */ -#include <assert.h> -/* Override any gcc2 internal prototype to avoid an error. */ -char vfork(); - -int main() { return 0; } -int t() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_vfork) || defined (__stub___vfork) -choke me -#else -vfork(); -#endif - -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - eval "ac_cv_func_vfork=yes" -else - rm -rf conftest* - eval "ac_cv_func_vfork=no" -fi -rm -f conftest* - -fi -if eval "test \"`echo '$ac_cv_func_'vfork`\" = yes"; then - echo "$ac_t""yes" 1>&6 - : -else - echo "$ac_t""no" 1>&6 -fi - -else -cat > conftest.$ac_ext <<EOF -#line 3017 "configure" -#include "confdefs.h" -/* Thanks to Paul Eggert for this test. */ -#include <stdio.h> -#include <sys/types.h> -#include <sys/stat.h> -#ifdef HAVE_UNISTD_H -#include <unistd.h> -#endif -#ifdef HAVE_VFORK_H -#include <vfork.h> -#endif -/* On some sparc systems, changes by the child to local and incoming - argument registers are propagated back to the parent. - The compiler is told about this with #include <vfork.h>, - but some compilers (e.g. gcc -O) don't grok <vfork.h>. - Test for this by using a static variable whose address - is put into a register that is clobbered by the vfork. */ -static -#ifdef __cplusplus -sparc_address_test (int arg) -#else -sparc_address_test (arg) int arg; -#endif -{ - static pid_t child; - if (!child) { - child = vfork (); - if (child < 0) - perror ("vfork"); - if (!child) { - arg = getpid(); - write(-1, "", 0); - _exit (arg); - } - } -} -main() { - pid_t parent = getpid (); - pid_t child; - - sparc_address_test (); - - child = vfork (); - - if (child == 0) { - /* Here is another test for sparc vfork register problems. - This test uses lots of local variables, at least - as many local variables as main has allocated so far - including compiler temporaries. 4 locals are enough for - gcc 1.40.3 on a Solaris 4.1.3 sparc, but we use 8 to be safe. - A buggy compiler should reuse the register of parent - for one of the local variables, since it will think that - parent can't possibly be used any more in this routine. - Assigning to the local variable will thus munge parent - in the parent process. */ - pid_t - p = getpid(), p1 = getpid(), p2 = getpid(), p3 = getpid(), - p4 = getpid(), p5 = getpid(), p6 = getpid(), p7 = getpid(); - /* Convince the compiler that p..p7 are live; otherwise, it might - use the same hardware register for all 8 local variables. */ - if (p != p1 || p != p2 || p != p3 || p != p4 - || p != p5 || p != p6 || p != p7) - _exit(1); - - /* On some systems (e.g. IRIX 3.3), - vfork doesn't separate parent from child file descriptors. - If the child closes a descriptor before it execs or exits, - this munges the parent's descriptor as well. - Test for this by closing stdout in the child. */ - _exit(close(fileno(stdout)) != 0); - } else { - int status; - struct stat st; - - while (wait(&status) != child) - ; - exit( - /* Was there some problem with vforking? */ - child < 0 - - /* Did the child fail? (This shouldn't happen.) */ - || status - - /* Did the vfork/compiler bug occur? */ - || parent != getpid() - - /* Did the file descriptor bug occur? */ - || fstat(fileno(stdout), &st) != 0 - ); - } -} -EOF -eval $ac_link -if test -s conftest && (./conftest; exit) 2>/dev/null; then - ac_cv_func_vfork=yes -else - ac_cv_func_vfork=no -fi -fi -rm -fr conftest* -fi - -echo "$ac_t""$ac_cv_func_vfork" 1>&6 -if test $ac_cv_func_vfork = no; then - cat >> confdefs.h <<\EOF -#define vfork fork -EOF - -fi - - -if test "$need_env" = yes; then - LIBOBJS="env.o $LIBOBJS" -fi - -if test "$need_strsep" = yes; then - LIBOBJS="strsep.o $LIBOBJS" -fi - -echo $ac_n "checking for fcntl/flock""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'vi_cv_lock'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - vi_cv_lock=none - case "$host_os" in - dgux*);; - irix*);; - *) - cat > conftest.$ac_ext <<EOF -#line 3147 "configure" -#include "confdefs.h" -#include <fcntl.h> -int main() { return 0; } -int t() { -flock(0, 0); -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - vi_cv_lock=flock -fi -rm -f conftest* -;; - esac - if test "$vi_cv_lock" = none; then - cat > conftest.$ac_ext <<EOF -#line 3164 "configure" -#include "confdefs.h" -#include <fcntl.h> -int main() { return 0; } -int t() { -fcntl(0, F_SETLK, 0); -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - vi_cv_lock=fcntl -fi -rm -f conftest* - - fi -fi - - -if test "$vi_cv_lock" = flock; then - cat >> confdefs.h <<\EOF -#define HAVE_LOCK_FLOCK 1 -EOF - -fi -if test "$vi_cv_lock" = fcntl; then - cat >> confdefs.h <<\EOF -#define HAVE_LOCK_FCNTL 1 -EOF - -fi -echo "$ac_t""$vi_cv_lock" 1>&6 - -echo $ac_n "checking for ftruncate/chsize""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'vi_cv_ftruncate'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 3201 "configure" -#include "confdefs.h" -#include <unistd.h> -int main() { return 0; } -int t() { -ftruncate(0, 0); -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - vi_cv_ftruncate=ftruncate -else - rm -rf conftest* - cat > conftest.$ac_ext <<EOF -#line 3215 "configure" -#include "confdefs.h" -#include <unistd.h> -int main() { return 0; } -int t() { -chsize(0, 0); -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - vi_cv_ftruncate=chsize -else - rm -rf conftest* - vi_cv_ftruncate=no -fi -rm -f conftest* - -fi -rm -f conftest* - -fi - -if test "$vi_cv_ftruncate" = ftruncate; then - cat >> confdefs.h <<\EOF -#define HAVE_FTRUNCATE_FTRUNCATE 1 -EOF - -fi -if test "$vi_cv_ftruncate" = chsize; then - cat >> confdefs.h <<\EOF -#define HAVE_FTRUNCATE_CHSIZE 1 -EOF - -fi -if test "$vi_cv_ftruncate" = no; then - echo - echo "Fatal error: no file truncation system call." - exit 1 -fi -echo "$ac_t""$vi_cv_ftruncate" 1>&6 - -echo $ac_n "checking for tigetstr/tigetnum""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'vi_cv_have_curses_tigetstr'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 3261 "configure" -#include "confdefs.h" -#include <curses.h> -int main() { return 0; } -int t() { -tigetstr(0); -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - vi_cv_have_curses_tigetstr=yes -else - rm -rf conftest* - vi_cv_have_curses_tigetstr=no -fi -rm -f conftest* - -fi - -if test "$vi_cv_have_curses_tigetstr" = yes; then - cat >> confdefs.h <<\EOF -#define HAVE_CURSES_TIGETSTR 1 -EOF - -fi -echo "$ac_t""$vi_cv_have_curses_tigetstr" 1>&6 - -if test "$vi_cv_curses" = "bundled curses"; then - cat >> confdefs.h <<\EOF -#define HAVE_BSD_CURSES 1 -EOF - - cat >> confdefs.h <<\EOF -#define HAVE_CURSES_ADDNSTR 1 -EOF - - cat >> confdefs.h <<\EOF -#define HAVE_CURSES_IDLOK 1 -EOF - -else - echo $ac_n "checking for addnstr""... $ac_c" 1>&6 - if eval "test \"`echo '$''{'vi_cv_have_curses_addnstr'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 3307 "configure" -#include "confdefs.h" -#include <curses.h> -int main() { return 0; } -int t() { -addnstr(0, 0); -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - vi_cv_have_curses_addnstr=yes -else - rm -rf conftest* - vi_cv_have_curses_addnstr=no -fi -rm -f conftest* - -fi - - if test "$vi_cv_have_curses_addnstr" = yes; then - cat >> confdefs.h <<\EOF -#define HAVE_CURSES_ADDNSTR 1 -EOF - - fi - echo "$ac_t""$vi_cv_have_curses_addnstr" 1>&6 - - echo $ac_n "checking for beep""... $ac_c" 1>&6 - if eval "test \"`echo '$''{'vi_cv_have_curses_beep'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 3339 "configure" -#include "confdefs.h" -#include <curses.h> -int main() { return 0; } -int t() { -beep(); -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - vi_cv_have_curses_beep=yes -else - rm -rf conftest* - vi_cv_have_curses_beep=no -fi -rm -f conftest* - -fi - - if test "$vi_cv_have_curses_beep" = yes; then - cat >> confdefs.h <<\EOF -#define HAVE_CURSES_BEEP 1 -EOF - - fi - echo "$ac_t""$vi_cv_have_curses_beep" 1>&6 - - echo $ac_n "checking for flash""... $ac_c" 1>&6 - if eval "test \"`echo '$''{'vi_cv_have_curses_flash'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 3371 "configure" -#include "confdefs.h" -#include <curses.h> -int main() { return 0; } -int t() { -flash(); -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - vi_cv_have_curses_flash=yes -else - rm -rf conftest* - vi_cv_have_curses_flash=no -fi -rm -f conftest* - -fi - - if test "$vi_cv_have_curses_flash" = yes; then - cat >> confdefs.h <<\EOF -#define HAVE_CURSES_FLASH 1 -EOF - - fi - echo "$ac_t""$vi_cv_have_curses_flash" 1>&6 - - echo $ac_n "checking for idlok""... $ac_c" 1>&6 - if eval "test \"`echo '$''{'vi_cv_have_curses_idlok'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 3403 "configure" -#include "confdefs.h" -#include <curses.h> -int main() { return 0; } -int t() { -idlok(0, 0); -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - vi_cv_have_curses_idlok=yes -else - rm -rf conftest* - vi_cv_have_curses_idlok=no -fi -rm -f conftest* - -fi - - if test "$vi_cv_have_curses_idlok" = yes; then - cat >> confdefs.h <<\EOF -#define HAVE_CURSES_IDLOK 1 -EOF - - fi - echo "$ac_t""$vi_cv_have_curses_idlok" 1>&6 - - echo $ac_n "checking for keypad""... $ac_c" 1>&6 - if eval "test \"`echo '$''{'vi_cv_have_curses_keypad'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 3435 "configure" -#include "confdefs.h" -#include <curses.h> -int main() { return 0; } -int t() { -keypad(0, 0); -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - vi_cv_have_curses_keypad=yes -else - rm -rf conftest* - vi_cv_have_curses_keypad=no -fi -rm -f conftest* - -fi - - if test "$vi_cv_have_curses_keypad" = yes; then - cat >> confdefs.h <<\EOF -#define HAVE_CURSES_KEYPAD 1 -EOF - - fi - echo "$ac_t""$vi_cv_have_curses_keypad" 1>&6 - - echo $ac_n "checking for newterm""... $ac_c" 1>&6 - if eval "test \"`echo '$''{'vi_cv_have_curses_newterm'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 3467 "configure" -#include "confdefs.h" -#include <curses.h> -int main() { return 0; } -int t() { -newterm(0, 0, 0); -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - vi_cv_have_curses_newterm=yes -else - rm -rf conftest* - vi_cv_have_curses_newterm=no -fi -rm -f conftest* - -fi - - if test "$vi_cv_have_curses_newterm" = yes; then - cat >> confdefs.h <<\EOF -#define HAVE_CURSES_NEWTERM 1 -EOF - - fi - echo "$ac_t""$vi_cv_have_curses_newterm" 1>&6 - - if test "$vi_cv_have_curses_newterm" = no; then - cat >> confdefs.h <<\EOF -#define HAVE_BSD_CURSES 1 -EOF - - fi -fi - -echo $ac_n "checking for setupterm""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'vi_cv_have_curses_setupterm'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 3507 "configure" -#include "confdefs.h" -#include <curses.h> -int main() { return 0; } -int t() { -setupterm(0, 0, 0); -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - vi_cv_have_curses_setupterm=yes -else - rm -rf conftest* - vi_cv_have_curses_setupterm=no -fi -rm -f conftest* - -fi - -if test "$vi_cv_have_curses_setupterm" = yes; then - cat >> confdefs.h <<\EOF -#define HAVE_CURSES_SETUPTERM 1 -EOF - -fi -echo "$ac_t""$vi_cv_have_curses_setupterm" 1>&6 - -echo $ac_n "checking for broken gettimeofday system call""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'vi_cv_gettimeofday'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 3539 "configure" -#include "confdefs.h" -#include <sys/types.h> -#include <sys/time.h> -int main() { return 0; } -int t() { -gettimeofday(0, 0); -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - vi_cv_gettimeofday=okay -else - rm -rf conftest* - vi_cv_gettimeofday=broken -fi -rm -f conftest* - -fi - -if test "$vi_cv_gettimeofday" = broken; then - cat >> confdefs.h <<\EOF -#define HAVE_BROKEN_GETTIMEOFDAY 1 -EOF - -fi -echo "$ac_t""$vi_cv_gettimeofday" 1>&6 - -echo $ac_n "checking for System V pty calls""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'vi_cv_sys5_pty'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 3572 "configure" -#include "confdefs.h" - -int main() { return 0; } -int t() { -grantpt(0); -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - vi_cv_sys5_pty=yes -else - rm -rf conftest* - vi_cv_sys5_pty=no -fi -rm -f conftest* - -fi - -if test "$vi_cv_sys5_pty" = yes; then - cat >> confdefs.h <<\EOF -#define HAVE_SYS5_PTY 1 -EOF - -fi -echo "$ac_t""$vi_cv_sys5_pty" 1>&6 - -echo $ac_n "checking for revoke system call""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'vi_cv_revoke'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 3604 "configure" -#include "confdefs.h" - -int main() { return 0; } -int t() { -revoke("a"); -; return 0; } -EOF -if eval $ac_link; then - rm -rf conftest* - vi_cv_revoke=yes -else - rm -rf conftest* - vi_cv_revoke=no -fi -rm -f conftest* - -fi - -if test "$vi_cv_revoke" = yes; then - cat >> confdefs.h <<\EOF -#define HAVE_REVOKE 1 -EOF - -fi -echo "$ac_t""$vi_cv_revoke" 1>&6 - -echo $ac_n "checking for int type sprintf return value""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'vi_cv_sprintf_count'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test "$cross_compiling" = yes; then - { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } -else -cat > conftest.$ac_ext <<EOF -#line 3639 "configure" -#include "confdefs.h" -main(){char buf[20]; exit(sprintf(buf, "XXX") != 3);} -EOF -eval $ac_link -if test -s conftest && (./conftest; exit) 2>/dev/null; then - vi_cv_sprintf_count=yes -else - vi_cv_sprintf_count=no -fi -fi -rm -fr conftest* -fi - -if test "$vi_cv_sprintf_count" = no; then - cat >> confdefs.h <<\EOF -#define SPRINTF_RET_CHARPNT 1 -EOF - -fi -echo "$ac_t""$vi_cv_sprintf_count" 1>&6 - -echo $ac_n "checking if --disable-db option specified""... $ac_c" 1>&6 -# Check whether --enable-db or --disable-db was given. -if test "${enable_db+set}" = set; then - enableval="$enable_db" - vi_cv_db_lib="other DB" -else - vi_cv_db_lib="bundled DB" -fi - -echo "$ac_t""$vi_cv_db_lib" 1>&6 -case "$vi_cv_db_lib" in -"bundled DB") - CPPFLAGS="-I\$(srcdir)/db/include $CPPFLAGS" - LIBOBJS="\$(DBOBJS) $LIBOBJS";; -"other DB") - ;; -esac - -echo $ac_n "checking if --disable-re option specified""... $ac_c" 1>&6 -# Check whether --enable-re or --disable-re was given. -if test "${enable_re+set}" = set; then - enableval="$enable_re" - vi_cv_re_lib="other RE" -else - vi_cv_re_lib="bundled RE" -fi - -echo "$ac_t""$vi_cv_re_lib" 1>&6 -case "$vi_cv_re_lib" in -"bundled RE") - CPPFLAGS="-I\$(srcdir)/regex $CPPFLAGS" - LIBOBJS="\$(REOBJS) $LIBOBJS";; -"other RE") - ;; -esac - - -echo $ac_n "checking for u_char""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'vi_cv_uchar'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 3703 "configure" -#include "confdefs.h" -#include <sys/types.h> -int main() { return 0; } -int t() { -u_char foo; -; return 0; } -EOF -if eval $ac_compile; then - rm -rf conftest* - vi_cv_uchar=yes -else - rm -rf conftest* - vi_cv_uchar=no -fi -rm -f conftest* - -fi - -echo "$ac_t""$vi_cv_uchar" 1>&6 -if test "$vi_cv_uchar" = no; then - u_char_decl="typedef unsigned char u_char;" -fi - - -echo $ac_n "checking for u_short""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'vi_cv_ushort'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 3733 "configure" -#include "confdefs.h" -#include <sys/types.h> -int main() { return 0; } -int t() { -u_short foo; -; return 0; } -EOF -if eval $ac_compile; then - rm -rf conftest* - vi_cv_ushort=yes -else - rm -rf conftest* - vi_cv_ushort=no -fi -rm -f conftest* - -fi - -echo "$ac_t""$vi_cv_ushort" 1>&6 -if test "$vi_cv_ushort" = no; then - u_short_decl="typedef unsigned short u_short;" -fi - - -echo $ac_n "checking for u_int""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'vi_cv_uint'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 3763 "configure" -#include "confdefs.h" -#include <sys/types.h> -int main() { return 0; } -int t() { -u_int foo; -; return 0; } -EOF -if eval $ac_compile; then - rm -rf conftest* - vi_cv_uint=yes -else - rm -rf conftest* - vi_cv_uint=no -fi -rm -f conftest* - -fi - -echo "$ac_t""$vi_cv_uint" 1>&6 -if test "$vi_cv_uint" = no; then - u_int_decl="typedef unsigned int u_int;" -fi - - -echo $ac_n "checking for u_long""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'vi_cv_ulong'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 3793 "configure" -#include "confdefs.h" -#include <sys/types.h> -int main() { return 0; } -int t() { -u_long foo; -; return 0; } -EOF -if eval $ac_compile; then - rm -rf conftest* - vi_cv_ulong=yes -else - rm -rf conftest* - vi_cv_ulong=no -fi -rm -f conftest* - -fi - -echo "$ac_t""$vi_cv_ulong" 1>&6 -if test "$vi_cv_ulong" = no; then - u_long_decl="typedef unsigned long u_long;" -fi - - -echo $ac_n "checking for u_int8_t""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'vi_cv_uint8'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 3823 "configure" -#include "confdefs.h" -#include <sys/types.h> -int main() { return 0; } -int t() { -u_int8_t foo; -; return 0; } -EOF -if eval $ac_compile; then - rm -rf conftest* - vi_cv_uint8=yes -else - rm -rf conftest* - if test "$cross_compiling" = yes; then - { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } -else -cat > conftest.$ac_ext <<EOF -#line 3840 "configure" -#include "confdefs.h" -main(){exit(sizeof(unsigned char) != 1);} -EOF -eval $ac_link -if test -s conftest && (./conftest; exit) 2>/dev/null; then - vi_cv_uint8="unsigned char" -else - vi_cv_uint8=no -fi -fi -rm -fr conftest* -fi -rm -f conftest* - -fi - -echo "$ac_t""$vi_cv_uint8" 1>&6 -if test "$vi_cv_uint8" = no; then - echo - echo "Fatal error: no unsigned, 8-bit integral type." - exit 1 -fi -if test "$vi_cv_uint8" != yes; then - u_int8_decl="typedef $vi_cv_uint8 u_int8_t;" -fi - - -echo $ac_n "checking for u_int16_t""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'vi_cv_uint16'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 3873 "configure" -#include "confdefs.h" -#include <sys/types.h> -int main() { return 0; } -int t() { -u_int16_t foo; -; return 0; } -EOF -if eval $ac_compile; then - rm -rf conftest* - vi_cv_uint16=yes -else - rm -rf conftest* - if test "$cross_compiling" = yes; then - { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } -else -cat > conftest.$ac_ext <<EOF -#line 3890 "configure" -#include "confdefs.h" -main(){exit(sizeof(unsigned short) != 2);} -EOF -eval $ac_link -if test -s conftest && (./conftest; exit) 2>/dev/null; then - vi_cv_uint16="unsigned short" -else - if test "$cross_compiling" = yes; then - { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } -else -cat > conftest.$ac_ext <<EOF -#line 3902 "configure" -#include "confdefs.h" -main(){exit(sizeof(unsigned int) != 2);} -EOF -eval $ac_link -if test -s conftest && (./conftest; exit) 2>/dev/null; then - vi_cv_uint16="unsigned int" -else - vi_cv_uint16=no -fi -fi -rm -fr conftest* -fi -fi -rm -fr conftest* -fi -rm -f conftest* - -fi - -echo "$ac_t""$vi_cv_uint16" 1>&6 -if test "$vi_cv_uint16" = no; then - echo - echo "Fatal error: no unsigned, 16-bit integral type." - exit 1 -fi -if test "$vi_cv_uint16" != yes; then - u_int16_decl="typedef $vi_cv_uint16 u_int16_t;" -fi - - -echo $ac_n "checking for int16_t""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'vi_cv_int16'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 3938 "configure" -#include "confdefs.h" -#include <sys/types.h> -int main() { return 0; } -int t() { -int16_t foo; -; return 0; } -EOF -if eval $ac_compile; then - rm -rf conftest* - vi_cv_int16=yes -else - rm -rf conftest* - if test "$cross_compiling" = yes; then - { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } -else -cat > conftest.$ac_ext <<EOF -#line 3955 "configure" -#include "confdefs.h" -main(){exit(sizeof(short) != 2);} -EOF -eval $ac_link -if test -s conftest && (./conftest; exit) 2>/dev/null; then - vi_cv_int16="short" -else - if test "$cross_compiling" = yes; then - { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } -else -cat > conftest.$ac_ext <<EOF -#line 3967 "configure" -#include "confdefs.h" -main(){exit(sizeof(int) != 2);} -EOF -eval $ac_link -if test -s conftest && (./conftest; exit) 2>/dev/null; then - vi_cv_int16="int" -else - vi_cv_int16=no -fi -fi -rm -fr conftest* -fi -fi -rm -fr conftest* -fi -rm -f conftest* - -fi - -echo "$ac_t""$vi_cv_int16" 1>&6 -if test "$vi_cv_int16" = no; then - echo - echo "Fatal error: no signed, 16-bit integral type." - exit 1 -fi -if test "$vi_cv_int16" != yes; then - int16_decl="typedef $vi_cv_int16 int16_t;" -fi - - -echo $ac_n "checking for u_int32_t""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'vi_cv_uint32'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 4003 "configure" -#include "confdefs.h" -#include <sys/types.h> -int main() { return 0; } -int t() { -u_int32_t foo; -; return 0; } -EOF -if eval $ac_compile; then - rm -rf conftest* - vi_cv_uint32=yes -else - rm -rf conftest* - if test "$cross_compiling" = yes; then - { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } -else -cat > conftest.$ac_ext <<EOF -#line 4020 "configure" -#include "confdefs.h" -main(){exit(sizeof(unsigned int) != 4);} -EOF -eval $ac_link -if test -s conftest && (./conftest; exit) 2>/dev/null; then - vi_cv_uint32="unsigned int" -else - if test "$cross_compiling" = yes; then - { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } -else -cat > conftest.$ac_ext <<EOF -#line 4032 "configure" -#include "confdefs.h" -main(){exit(sizeof(unsigned long) != 4);} -EOF -eval $ac_link -if test -s conftest && (./conftest; exit) 2>/dev/null; then - vi_cv_uint32="unsigned long" -else - vi_cv_uint32=no -fi -fi -rm -fr conftest* -fi -fi -rm -fr conftest* -fi -rm -f conftest* - -fi - -echo "$ac_t""$vi_cv_uint32" 1>&6 -if test "$vi_cv_uint32" = no; then - echo - echo "Fatal error: no unsigned, 32-bit integral type." - exit 1 -fi -if test "$vi_cv_uint32" != yes; then - u_int32_decl="typedef $vi_cv_uint32 u_int32_t;" -fi - - -echo $ac_n "checking for int32_t""... $ac_c" 1>&6 -if eval "test \"`echo '$''{'vi_cv_int32'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 4068 "configure" -#include "confdefs.h" -#include <sys/types.h> -int main() { return 0; } -int t() { -int32_t foo; -; return 0; } -EOF -if eval $ac_compile; then - rm -rf conftest* - vi_cv_int32=yes -else - rm -rf conftest* - if test "$cross_compiling" = yes; then - { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } -else -cat > conftest.$ac_ext <<EOF -#line 4085 "configure" -#include "confdefs.h" -main(){exit(sizeof(int) != 4);} -EOF -eval $ac_link -if test -s conftest && (./conftest; exit) 2>/dev/null; then - vi_cv_int32="int" -else - if test "$cross_compiling" = yes; then - { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } -else -cat > conftest.$ac_ext <<EOF -#line 4097 "configure" -#include "confdefs.h" -main(){exit(sizeof(long) != 4);} -EOF -eval $ac_link -if test -s conftest && (./conftest; exit) 2>/dev/null; then - vi_cv_int32="long" -else - vi_cv_int32=no -fi -fi -rm -fr conftest* -fi -fi -rm -fr conftest* -fi -rm -f conftest* - -fi - -echo "$ac_t""$vi_cv_int32" 1>&6 -if test "$vi_cv_int32" = no; then - echo - echo "Fatal error: no signed, 32-bit integral type." - exit 1 -fi -if test "$vi_cv_int32" != yes; then - int32_decl="typedef $vi_cv_int32 int32_t;" -fi - -trap '' 1 2 15 -cat > confcache <<\EOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs. It is not useful on other systems. -# If it contains results you don't want to keep, you may remove or edit it. -# -# By default, configure uses ./config.cache as the cache file, -# creating it if it does not exist already. You can give configure -# the --cache-file=FILE option to use a different cache file; that is -# what configure does when it calls configure scripts in -# subdirectories, so they share the cache. -# Giving --cache-file=/dev/null disables caching, for debugging configure. -# config.status only pays attention to the cache file if you give it the -# --recheck option to rerun configure. -# -EOF -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -(set) 2>&1 | - sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \ - >> confcache -if cmp -s $cache_file confcache; then - : -else - if test -w $cache_file; then - echo "updating cache $cache_file" - cat confcache > $cache_file - else - echo "not updating unwritable cache $cache_file" - fi -fi -rm -f confcache - -trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -# Any assignment to VPATH causes Sun make to only execute -# the first set of double-colon rules, so remove it if not needed. -# If there is a colon in the path, we need to keep it. -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' -fi - -trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 - -DEFS=-DHAVE_CONFIG_H - -# Without the "./", some shells look in PATH for config.status. -: ${CONFIG_STATUS=./config.status} - -echo creating $CONFIG_STATUS -rm -f $CONFIG_STATUS -cat > $CONFIG_STATUS <<EOF -#! /bin/sh -# Generated automatically by configure. -# Run this file to recreate the current configuration. -# This directory was configured as follows, -# on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# -# $0 $ac_configure_args -# -# Compiler output produced by configure, useful for debugging -# configure, is in ./config.log if it exists. - -ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" -for ac_option -do - case "\$ac_option" in - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" - exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; - -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.7" - exit 0 ;; - -help | --help | --hel | --he | --h) - echo "\$ac_cs_usage"; exit 0 ;; - *) echo "\$ac_cs_usage"; exit 1 ;; - esac -done - -ac_given_srcdir=$srcdir -ac_given_INSTALL="$INSTALL" - -trap 'rm -fr `echo "Makefile port.h:port.h.in - pathnames.h:pathnames.h.in recover:recover.in config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 -EOF -cat >> $CONFIG_STATUS <<EOF - -# Protect against being on the right side of a sed subst in config.status. -sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g; - s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF -$ac_vpsub -$extrasub -s%@CFLAGS@%$CFLAGS%g -s%@CPPFLAGS@%$CPPFLAGS%g -s%@CXXFLAGS@%$CXXFLAGS%g -s%@DEFS@%$DEFS%g -s%@LDFLAGS@%$LDFLAGS%g -s%@LIBS@%$LIBS%g -s%@exec_prefix@%$exec_prefix%g -s%@prefix@%$prefix%g -s%@program_transform_name@%$program_transform_name%g -s%@bindir@%$bindir%g -s%@sbindir@%$sbindir%g -s%@libexecdir@%$libexecdir%g -s%@datadir@%$datadir%g -s%@sysconfdir@%$sysconfdir%g -s%@sharedstatedir@%$sharedstatedir%g -s%@localstatedir@%$localstatedir%g -s%@libdir@%$libdir%g -s%@includedir@%$includedir%g -s%@oldincludedir@%$oldincludedir%g -s%@infodir@%$infodir%g -s%@mandir@%$mandir%g -s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g -s%@INSTALL_DATA@%$INSTALL_DATA%g -s%@host@%$host%g -s%@host_alias@%$host_alias%g -s%@host_cpu@%$host_cpu%g -s%@host_vendor@%$host_vendor%g -s%@host_os@%$host_os%g -s%@CC@%$CC%g -s%@OPTFLAG@%$OPTFLAG%g -s%@no_op_OPTFLAG@%$no_op_OPTFLAG%g -s%@vi_cv_path_shell@%$vi_cv_path_shell%g -s%@vi_cv_path_sendmail@%$vi_cv_path_sendmail%g -s%@vi_cv_path_perl@%$vi_cv_path_perl%g -s%@vi_cv_path_preserve@%$vi_cv_path_preserve%g -s%@vi_cv_path_chmod@%$vi_cv_path_chmod%g -s%@vi_cv_path_cp@%$vi_cv_path_cp%g -s%@vi_cv_path_ln@%$vi_cv_path_ln%g -s%@vi_cv_path_mkdir@%$vi_cv_path_mkdir%g -s%@vi_cv_path_rm@%$vi_cv_path_rm%g -s%@vi_cv_path_strip@%$vi_cv_path_strip%g -s%@CPP@%$CPP%g -s%@XINCS@%$XINCS%g -s%@shrpenv@%$shrpenv%g -s%@vi_cv_perllib@%$vi_cv_perllib%g -s%@tknvi@%$tknvi%g -s%@TKLIBS@%$TKLIBS%g -s%@cobjs@%$cobjs%g -s%@LIBOBJS@%$LIBOBJS%g -s%@u_char_decl@%$u_char_decl%g -s%@u_short_decl@%$u_short_decl%g -s%@u_int_decl@%$u_int_decl%g -s%@u_long_decl@%$u_long_decl%g -s%@u_int8_decl@%$u_int8_decl%g -s%@u_int16_decl@%$u_int16_decl%g -s%@int16_decl@%$int16_decl%g -s%@u_int32_decl@%$u_int32_decl%g -s%@int32_decl@%$int32_decl%g - -CEOF -EOF -cat >> $CONFIG_STATUS <<EOF - -CONFIG_FILES=\${CONFIG_FILES-"Makefile port.h:port.h.in - pathnames.h:pathnames.h.in recover:recover.in"} -EOF -cat >> $CONFIG_STATUS <<\EOF -for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then - # Support "outfile[:infile]", defaulting infile="outfile.in". - case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'` - ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - *) ac_file_in="${ac_file}.in" ;; - esac - - # Adjust relative srcdir, etc. for subdirectories. - - # Remove last slash and all that follows it. Not all systems have dirname. - ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` - if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then - # The file is in a subdirectory. - test ! -d "$ac_dir" && mkdir "$ac_dir" - ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" - # A "../" for each directory in $ac_dir_suffix. - ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` - else - ac_dir_suffix= ac_dots= - fi - - case "$ac_given_srcdir" in - .) srcdir=. - if test -z "$ac_dots"; then top_srcdir=. - else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; - /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; - *) # Relative path. - srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" - top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac - - case "$ac_given_INSTALL" in - [/$]*) INSTALL="$ac_given_INSTALL" ;; - *) INSTALL="$ac_dots$ac_given_INSTALL" ;; - esac - echo creating "$ac_file" - rm -f "$ac_file" - configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." - case "$ac_file" in - *Makefile*) ac_comsub="1i\\ -# $configure_input" ;; - *) ac_comsub= ;; - esac - sed -e "$ac_comsub -s%@configure_input@%$configure_input%g -s%@srcdir@%$srcdir%g -s%@top_srcdir@%$top_srcdir%g -s%@INSTALL@%$INSTALL%g -" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file -fi; done -rm -f conftest.subs - -# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where -# NAME is the cpp macro being defined and VALUE is the value it is being given. -# -# ac_d sets the value in "#define NAME VALUE" lines. -ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)' -ac_dB='\([ ][ ]*\)[^ ]*%\1#\2' -ac_dC='\3' -ac_dD='%g' -# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE". -ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' -ac_uB='\([ ]\)%\1#\2define\3' -ac_uC=' ' -ac_uD='\4%g' -# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE". -ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' -ac_eB='$%\1#\2define\3' -ac_eC=' ' -ac_eD='%g' - -CONFIG_HEADERS=${CONFIG_HEADERS-"config.h"} -for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then - # Support "outfile[:infile]", defaulting infile="outfile.in". - case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'` - ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - *) ac_file_in="${ac_file}.in" ;; - esac - - echo creating $ac_file - - rm -f conftest.frag conftest.in conftest.out - cp $ac_given_srcdir/$ac_file_in conftest.in - -EOF - -# Transform confdefs.h into a sed script conftest.vals that substitutes -# the proper values into config.h.in to produce config.h. And first: -# Protect against being on the right side of a sed subst in config.status. -# Protect against being in an unquoted here document in config.status. -rm -f conftest.vals -cat > conftest.hdr <<\EOF -s/[\\&%]/\\&/g -s%[\\$`]%\\&%g -s%#define \([A-Za-z_][A-Za-z0-9_]*\) \(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp -s%ac_d%ac_u%gp -s%ac_u%ac_e%gp -EOF -sed -n -f conftest.hdr confdefs.h > conftest.vals -rm -f conftest.hdr - -# This sed command replaces #undef with comments. This is necessary, for -# example, in the case of _POSIX_SOURCE, which is predefined and required -# on some systems where configure will not decide to define it. -cat >> conftest.vals <<\EOF -s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */% -EOF - -# Break up conftest.vals because some shells have a limit on -# the size of here documents, and old seds have small limits too. -# Maximum number of lines to put in a single here document. -ac_max_here_lines=12 - -rm -f conftest.tail -while : -do - ac_lines=`grep -c . conftest.vals` - # grep -c gives empty output for an empty file on some AIX systems. - if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi - # Write a limited-size here document to conftest.frag. - echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS - sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS - echo 'CEOF - sed -f conftest.frag conftest.in > conftest.out - rm -f conftest.in - mv conftest.out conftest.in -' >> $CONFIG_STATUS - sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail - rm -f conftest.vals - mv conftest.tail conftest.vals -done -rm -f conftest.vals - -cat >> $CONFIG_STATUS <<\EOF - rm -f conftest.frag conftest.h - echo "/* $ac_file. Generated automatically by configure. */" > conftest.h - cat conftest.in >> conftest.h - rm -f conftest.in - if cmp -s $ac_file conftest.h 2>/dev/null; then - echo "$ac_file is unchanged" - rm -f conftest.h - else - rm -f $ac_file - mv conftest.h $ac_file - fi -fi; done - - - -exit 0 -EOF -chmod +x $CONFIG_STATUS -rm -fr confdefs* $ac_clean_files -test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 - diff --git a/build/configure.in b/build/configure.in deleted file mode 100644 index cb8e4637d957..000000000000 --- a/build/configure.in +++ /dev/null @@ -1,725 +0,0 @@ -dnl @(#)configure.in 8.134 (Berkeley) 10/15/96 - -dnl Process this file with autoconf to produce a configure script. -AC_INIT(../common/main.c) -AC_CONFIG_HEADER(config.h) - -dnl Configure setup. -AC_PROG_INSTALL() -AC_CANONICAL_HOST -AC_ARG_PROGRAM() - -dnl If the user wants a debugging environment, set OPTFLAG now. (Some -dnl compilers won't mix optimizing and debug flags.) -AC_MSG_CHECKING(if --enable-debug option specified) -AC_ARG_ENABLE(debug, - [ --enable-debug Build a debugging version.], - [vi_cv_debug="yes"], [vi_cv_debug="no"]) -if test "$vi_cv_debug" = yes; then - AC_DEFINE(DEBUG) - OPTFLAG=${OPTFLAG-"-g"} - no_op_OPTFLAG=${no_op_OPTFLAG-"-g"} -fi -AC_MSG_RESULT($vi_cv_debug) - -dnl This is where we handle stuff that autoconf can't handle. -dnl XXX -dnl Don't override anything if it's already set from the environment. - -dnl Compiler, preprocessor and load flags. -dnl AUX: -ZP disables _BSD_SOURCE et al, but enables POSIX at link time. -dnl LynxOS: We check for gcc 2.x or better, the gcc 1 that was shipped with -dnl LynxOS historically wasn't good enough. -AC_SUBST(CPPFLAGS) -case "$host_os" in -aix3.2.5) OPTFLAG=${OPTFLAG-"-O"};; -aix4.1*) CFLAGS=${CFLAGS-"-qstrict"} - OPTFLAG=${OPTFLAG-"-O3"};; -aux*) CPPFLAGS=${CPPFLAGS-"-ZP -D_BSD_SOURCE -D_SYSV_SOURCE -D_AUX_SOURCE"} - LDFLAGS=${LDFLAGS-"-ZP"} - OPTFLAG=${OPTFLAG-"-O"};; -bsd4.4) OPTFLAG=${OPTFLAG-"-O2"};; -bsdi*) CC=${CC-"shlicc"} - OPTFLAG=${OPTFLAG-"-O2"};; -irix6*) OPTFLAG=${OPTFLAG-"-O2"};; -irix*) OPTFLAG=${OPTFLAG-"-O2"};; -lynxos*) AC_PROG_CC() - AC_MSG_CHECKING([for GNU C (gcc) version 2.x]) - ac_cv_gcc_vers=`${CC-cc} -v 2>&1 | \ - grep "gcc version " | sed 's/.*version //'` - ac_cv_gcc_major=`echo "$ac_cv_gcc_vers" | sed 's/\..*//'` - if test "$ac_cv_gcc_major" = "2" ; then - AC_MSG_RESULT(yes) - else - AC_MSG_RESULT(no) - echo "Fatal error: Nvi requires gcc 2.x to build on LynxOS." - echo "See build/README.LynxOS for more information." - exit 1 - fi;; -nextstep3) CPPFLAGS=${CPPFLAGS-"-w -pipe -posix"} - LDFLAGS=${LDFLAGS-"-posix"} - OPTFLAG=${OPTFLAG-"-O9"};; -osf*) CFLAGS=${CFLAGS-"-Olimit 1000"};; -solaris*) no_op_OPTFLAG=${no_op_OPTFLAG-""};; -sunos*) no_op_OPTFLAG=${no_op_OPTFLAG-""};; -esac - -dnl The default compiler is cc. -AC_SUBST(CC) -CC=${CC-cc} - -dnl The default OPTFLAG is -O -AC_SUBST(OPTFLAG) -OPTFLAG=${OPTFLAG-"-O"} - -dnl The SunOS/Solaris compiler can't optimize vi/v_txt.c; the symptom is -dnl that the command 35i==<esc> turns into an infinite loop. -AC_SUBST(no_op_OPTFLAG) -no_op_OPTFLAG=${no_op_OPTFLAG-"$OPTFLAG"} - -dnl Libraries. -case "$host_os" in -bsdi2.1) LIBS=${LIBS-"-lipc"};; -dgux*) LIBS=${LIBS-"-ldgc"};; -irix6*) LIBS=${LIBS-"-lbsd"};; -irix*) LIBS=${LIBS-"-lc_s -lbsd"};; -isc*) LIBS=${LIBS-"-lcposix -linet"};; -netbsd1*) LIBS=${LIBS-"-lcrypt"};; -ptx*) LIBS=${LIBS-"-lseq -linet -lsocket"};; -sco3.2*) LIBS=${LIBS-"-lsocket"};; -sinix*) LIBS=${LIBS-"-lelf -lc"};; -solaris*) LIBS=${LIBS-"-lsocket -lnsl -ldl"} - RLIBS=yes;; -wgs*) LIBS=${LIBS-"-lnsl"};; -esac - -dnl A/UX has a broken getopt(3), strpbrk(3). -case "$host_os" in -aux*) LIBOBJS="getopt.o strpbrk.o $LIBOBJS";; -esac - -dnl Ultrix has a broken POSIX.1 VDISABLE value. -case "$host_os" in -ultrix*) AC_DEFINE(HAVE_BROKEN_VDISABLE);; -esac - -dnl The user may have additional CPP information. -CPPFLAGS="$ADDCPPFLAGS $CPPFLAGS" - -dnl The user may have additional load line information. -LDFLAGS="$ADDLDFLAGS $LDFLAGS" - -dnl The user may have additional library information. -LIBS="$ADDLIBS $LIBS" - -dnl Check to see if it's going to work. -AM_SANITY_CHECK_CC - -dnl Checks for programs. -PATH="$PATH:/usr/bin:/usr/sbin:/sbin:/etc:/usr/etc:/usr/lib:/usr/ucblib:" - -dnl Check for the shell path. -AC_PATH_PROG(vi_cv_path_shell, sh, no) -if test "$vi_cv_path_shell" = no; then - echo "Fatal error: the shell utility not found." - exit 1 -fi - -dnl Check for the sendmail path. -AC_PATH_PROG(vi_cv_path_sendmail, sendmail, no) -if test "$vi_cv_path_sendmail" = no; then - echo "WARNING: The sendmail utility was not found!" - echo "WARNING: Users will not be told of saved files." -fi - -dnl Check for the perl5/perl path. -AC_SUBST(vi_cv_path_perl) -AC_PATH_PROGS(vi_cv_path_perl, perl5 perl, no) - -dnl Check for the "preserve" path. -dnl Historically, nvi has used /var/tmp/vi.recover. The Linux filesystem -dnl standard (FSSTND) uses /var/preserve; we add the vi.recover directory -dnl beneath it so that we don't have name collisions with other editors. -dnl Other systems have /var/preserve as well, so we test first for an already -dnl existing name, and then use the first one that's writeable. -AC_SUBST(vi_cv_path_preserve) -AC_MSG_CHECKING(for preserve directory) -AC_CACHE_VAL(vi_cv_path_preserve, [dnl - dirlist="/var/preserve /var/tmp /usr/tmp" - vi_cv_path_preserve=no - for i in $dirlist; do - if test -d $i/vi.recover; then - vi_cv_path_preserve=$i/vi.recover - break; - fi - done - if test "$vi_cv_path_preserve" = no; then - for i in $dirlist; do - if test -d $i -a -w $i; then - vi_cv_path_preserve=$i/vi.recover - break; - fi - done - - fi]) -if test "$vi_cv_path_preserve" = no; then - echo "Fatal error: no writeable preserve directory found." - exit 1 -fi -AC_MSG_RESULT($vi_cv_path_preserve) - -dnl Check for programs used for installation -AC_PATH_PROG(vi_cv_path_chmod, chmod, missing_chmod) -AC_PATH_PROG(vi_cv_path_cp, cp, missing_cp) -AC_PATH_PROG(vi_cv_path_ln, ln, missing_ln) -AC_PATH_PROG(vi_cv_path_mkdir, mkdir, missing_mkdir) -AC_PATH_PROG(vi_cv_path_rm, rm, missing_rm) -AC_PATH_PROG(vi_cv_path_strip, strip, missing_strip) - -dnl Checks for libraries. -dnl Find the X libraries and includes. -AC_PATH_X -AC_SUBST(XINCS) -if test "$no_x" != yes; then - if test "X$x_libraries" != "X"; then - if test "X$RLIBS" = "Xyes"; then - XLIBS="-R$x_libraries -L$x_libraries $XLIBS" - else - XLIBS="-L$x_libraries $XLIBS" - fi - fi - XLIBS="$XLIBS -lX11" - if test "X$x_includes" != "X"; then - XINCS="-I$x_includes" - fi -fi - -dnl If the user wants a Perl interpreter in nvi, load it. -AC_SUBST(shrpenv) -AC_SUBST(vi_cv_perllib) -AC_MSG_CHECKING(if --enable-perlinterp option specified) -AC_ARG_ENABLE(perlinterp, - [ --enable-perlinterp Include a Perl interpreter in vi.], - [vi_cv_perlinterp="yes"], [vi_cv_perlinterp="no"]) -AC_MSG_RESULT($vi_cv_perlinterp) -if test "$vi_cv_perlinterp" = "yes"; then - if test "$vi_cv_path_perl" = no; then - echo "Fatal error: no perl5 utility found." - exit 1 - fi - $vi_cv_path_perl -e 'require 5.002' || { - echo "Fatal error: perl5 must be version 5.002 or later." - exit 1 - } - $vi_cv_path_perl -e 'close(STDERR);require 5.003_01' && - AC_DEFINE(HAVE_PERL_5_003_01) - - eval `$vi_cv_path_perl -V:shrpenv` - if test "X$shrpenv" = "XUNKNOWN"; then # pre 5.003_04 - shrpenv="" - fi - vi_cv_perllib=`$vi_cv_path_perl -MConfig -e 'print $Config{privlib}'` - perlcppflags=`$vi_cv_path_perl -Mlib=$srcdir -MExtUtils::Embed \ - -e 'ccflags;perl_inc'` - if test "X$perlcppflags" != "X"; then - CPPFLAGS="$perlcppflags $CPPFLAGS" - fi - perllibs=`cd $srcdir;$vi_cv_path_perl -MExtUtils::Embed \ - -e 'ldopts'` - if test "X$perllibs" != "X"; then - LIBS="$perllibs $LIBS" - fi - perlldflags=`cd $srcdir;$vi_cv_path_perl -MExtUtils::Embed \ - -e 'ccdlflags'` - if test "X$perlldflags" != "X"; then - LDFLAGS="$perlldflags $LDFLAGS" - fi - LIBOBJS="perl.o perlsfio.o $LIBOBJS" - AC_DEFINE(HAVE_PERL_INTERP) -fi - -dnl If the user wants a Tk/Tcl front-end for nvi, build it. -AC_SUBST(tknvi) -AC_SUBST(TKLIBS) -AC_MSG_CHECKING(if --enable-tknvi option specified) -AC_ARG_ENABLE(tknvi, - [ --enable-tknvi Build a Tk/Tcl front-end for vi.], - [vi_cv_tknvi="yes"], [vi_cv_tknvi="no"]) -AC_MSG_RESULT($vi_cv_tknvi) -if test "$vi_cv_tknvi" = "yes"; then - tknvi=tknvi - TKLIBS="-ltk -ltcl -lm $XLIBS $LIBS" -fi - -dnl If the user wants a Tk/Tcl interpreter in nvi, load it. -AC_MSG_CHECKING(if --enable-tclinterp option specified) -AC_ARG_ENABLE(tclinterp, - [ --enable-tclinterp Include a Tk/Tcl interpreter in vi.], - [vi_cv_tclinterp="yes"], [vi_cv_tclinterp="no"]) -AC_MSG_RESULT($vi_cv_tclinterp) -if test "$vi_cv_tclinterp" = "yes"; then - LIBOBJS="tcl.o $LIBOBJS" - LIBS="-ltk -ltcl -lm $XLIBS $LIBS" - AC_DEFINE(HAVE_TCL_INTERP) -fi - -dnl Make sure that we can find a Tk/Tcl library. -if test "$vi_cv_tknvi" = "yes" || test "$vi_cv_tclinterp" = "yes"; then - AC_CHECK_LIB(tcl, main, - [vi_cv_tkfatal="no"], [vi_cv_tkfatal="yes"], -ltk -lm) - if test "$vi_cv_tkfatal" = "yes"; then - echo "Fatal error: no Tk/Tcl library; see the section" - echo "ADDING LIBRARIES AND INCLUDE FILES in the README file." - exit 1 - fi -fi - -dnl Both Tcl/Tk and Perl interpreters need the vi api code. -if test "$vi_cv_tclinterp" = yes || test "$vi_cv_perlinterp" = yes; then - LIBOBJS="api.o $LIBOBJS" -fi - -dnl Check for the termcap/termlib library. Compile in nvi's curses routines -dnl unless the user specifies otherwise. These two checks must occur in the -dnl current order, and -lcurses must be loaded before -ltermcap/-ltermlib. -AC_CHECK_LIB(termlib, tgetent, - [vi_cv_termlib=-ltermlib], [vi_cv_termlib=no]) -if test "$vi_cv_termlib" = no; then - AC_CHECK_LIB(termcap, tgetent, - [vi_cv_termlib=-ltermcap], [vi_cv_termlib=no]) -fi -if test "$vi_cv_termlib" != no; then - LIBS="$vi_cv_termlib $LIBS" -fi -AC_SUBST(cobjs) -AC_MSG_CHECKING(if --disable-curses option specified) -AC_ARG_ENABLE(curses, - [ --disable-curses DON'T use the nvi-provided curses routines.], - [vi_cv_curses="other curses"], [vi_cv_curses="bundled curses"]) -AC_MSG_RESULT($vi_cv_curses) -case "$vi_cv_curses" in -"bundled curses") - CPPFLAGS="-I\$(srcdir)/curses $CPPFLAGS" - cobjs="\$(COBJS)";; -"other curses") - LIBS="-lcurses $LIBS";; -esac - -dnl Checks for header files. -AC_MSG_CHECKING(for sys/mman.h) -AC_CACHE_VAL(vi_cv_include_sys_mman, [dnl -AC_TRY_CPP([#include <sys/mman.h>], - [vi_cv_include_sys_mman=yes], [vi_cv_include_sys_mman=no])]) -if test "$vi_cv_include_sys_mman" = yes; then - AC_DEFINE(HAVE_SYS_MMAN_H) -fi -AC_MSG_RESULT($vi_cv_include_sys_mman) - -AC_MSG_CHECKING(for sys/select.h) -AC_CACHE_VAL(vi_cv_include_sys_select, [dnl -AC_TRY_CPP([#include <sys/select.h>], - [vi_cv_include_sys_select=yes], [vi_cv_include_sys_select=no])]) -if test "$vi_cv_include_sys_select" = yes; then - AC_DEFINE(HAVE_SYS_SELECT_H) -fi -AC_MSG_RESULT($vi_cv_include_sys_select) - -dnl Checks for typedefs, structures, and compiler characteristics. -AC_CHECK_TYPE(ssize_t, int) -AC_C_BIGENDIAN -AC_C_CONST -AC_STRUCT_ST_BLKSIZE -AC_TYPE_MODE_T -AC_TYPE_OFF_T -AC_TYPE_PID_T -AC_TYPE_SIZE_T -AC_STRUCT_TM - -dnl Checks for library functions. - AC_CHECK_FUNCS(bsearch gethostname getopt memchr memcpy memmove memset) -AC_REPLACE_FUNCS(bsearch gethostname getopt memchr memcpy memmove memset) - AC_CHECK_FUNCS(mkstemp mmap snprintf strdup strerror strpbrk strtol) -AC_REPLACE_FUNCS(mkstemp mmap snprintf strdup strerror strpbrk strtol) - AC_CHECK_FUNCS(strtoul vsnprintf) -AC_REPLACE_FUNCS(strtoul vsnprintf) - -AC_CHECK_FUNCS(select) -AC_CHECK_FUNCS(setenv, [need_env=no], [need_env=yes]) -AC_CHECK_FUNCS(strsep, [need_strsep=no], [need_strsep=yes]) -AC_CHECK_FUNCS(unsetenv,, [need_env=yes]) - -AC_FUNC_MMAP -AC_FUNC_VFORK - -dnl If we needed setenv or unsetenv, add in the clib/env.c replacement file. -if test "$need_env" = yes; then - LIBOBJS="env.o $LIBOBJS" -fi - -dnl If we need strsep, add it and define it so we get a prototype. -if test "$need_strsep" = yes; then - LIBOBJS="strsep.o $LIBOBJS" -fi - -dnl Check for fcntl/flock -dnl Use flock preferentially, since it has cleaner semantics and won't -dnl hang up the editor. -dnl XXX -dnl Ultrix has a broken fcntl, but a working flock. -dnl IRIX and DGUX have a broken flock, but working fcntl. -AC_MSG_CHECKING(for fcntl/flock) -AC_CACHE_VAL(vi_cv_lock, [dnl - vi_cv_lock=none - case "$host_os" in - dgux*);; - irix*);; - *) - AC_TRY_LINK([#include <fcntl.h>], [flock(0, 0);], - [vi_cv_lock=flock]);; - esac - if test "$vi_cv_lock" = none; then - AC_TRY_LINK([#include <fcntl.h>], [fcntl(0, F_SETLK, 0);], - [vi_cv_lock=fcntl]) - fi]) - -if test "$vi_cv_lock" = flock; then - AC_DEFINE(HAVE_LOCK_FLOCK) -fi -if test "$vi_cv_lock" = fcntl; then - AC_DEFINE(HAVE_LOCK_FCNTL) -fi -AC_MSG_RESULT($vi_cv_lock) - -dnl Check for ftruncate/chsize -AC_MSG_CHECKING(for ftruncate/chsize) -AC_CACHE_VAL(vi_cv_ftruncate, [dnl -AC_TRY_LINK([#include <unistd.h>], [ftruncate(0, 0);], - [vi_cv_ftruncate=ftruncate], -AC_TRY_LINK([#include <unistd.h>], [chsize(0, 0);], - [vi_cv_ftruncate=chsize], [vi_cv_ftruncate=no]))]) -if test "$vi_cv_ftruncate" = ftruncate; then - AC_DEFINE(HAVE_FTRUNCATE_FTRUNCATE) -fi -if test "$vi_cv_ftruncate" = chsize; then - AC_DEFINE(HAVE_FTRUNCATE_CHSIZE) -fi -if test "$vi_cv_ftruncate" = no; then - echo - echo "Fatal error: no file truncation system call." - exit 1 -fi -AC_MSG_RESULT($vi_cv_ftruncate) - -dnl Check for the tigetstr/tigetnum functions. -AC_MSG_CHECKING(for tigetstr/tigetnum) -AC_CACHE_VAL(vi_cv_have_curses_tigetstr, [dnl -AC_TRY_LINK([#include <curses.h>], [tigetstr(0);], - [vi_cv_have_curses_tigetstr=yes], - [vi_cv_have_curses_tigetstr=no])]) -if test "$vi_cv_have_curses_tigetstr" = yes; then - AC_DEFINE(HAVE_CURSES_TIGETSTR) -fi -AC_MSG_RESULT($vi_cv_have_curses_tigetstr) - -dnl Check for potentially missing curses functions in system or user-specified -dnl libraries. We also have to guess at whether the specified library is a -dnl BSD or System V style curses. Use the newterm function, all System V -dnl curses implementations have it, none, as far as I know, of the BSD ones do. -if test "$vi_cv_curses" = "bundled curses"; then - AC_DEFINE(HAVE_BSD_CURSES) - AC_DEFINE(HAVE_CURSES_ADDNSTR) - AC_DEFINE(HAVE_CURSES_IDLOK) -else - dnl Check for the addnstr function. - AC_MSG_CHECKING(for addnstr) - AC_CACHE_VAL(vi_cv_have_curses_addnstr, [dnl - AC_TRY_LINK([#include <curses.h>], [addnstr(0, 0);], - [vi_cv_have_curses_addnstr=yes], - [vi_cv_have_curses_addnstr=no])]) - if test "$vi_cv_have_curses_addnstr" = yes; then - AC_DEFINE(HAVE_CURSES_ADDNSTR) - fi - AC_MSG_RESULT($vi_cv_have_curses_addnstr) - - dnl Check for the beep function. - AC_MSG_CHECKING(for beep) - AC_CACHE_VAL(vi_cv_have_curses_beep, [dnl - AC_TRY_LINK([#include <curses.h>], [beep();], - [vi_cv_have_curses_beep=yes], - [vi_cv_have_curses_beep=no])]) - if test "$vi_cv_have_curses_beep" = yes; then - AC_DEFINE(HAVE_CURSES_BEEP) - fi - AC_MSG_RESULT($vi_cv_have_curses_beep) - - dnl Check for the flash function. - AC_MSG_CHECKING(for flash) - AC_CACHE_VAL(vi_cv_have_curses_flash, [dnl - AC_TRY_LINK([#include <curses.h>], [flash();], - [vi_cv_have_curses_flash=yes], - [vi_cv_have_curses_flash=no])]) - if test "$vi_cv_have_curses_flash" = yes; then - AC_DEFINE(HAVE_CURSES_FLASH) - fi - AC_MSG_RESULT($vi_cv_have_curses_flash) - - dnl Check for the idlok function. - AC_MSG_CHECKING(for idlok) - AC_CACHE_VAL(vi_cv_have_curses_idlok, [dnl - AC_TRY_LINK([#include <curses.h>], [idlok(0, 0);], - [vi_cv_have_curses_idlok=yes], - [vi_cv_have_curses_idlok=no])]) - if test "$vi_cv_have_curses_idlok" = yes; then - AC_DEFINE(HAVE_CURSES_IDLOK) - fi - AC_MSG_RESULT($vi_cv_have_curses_idlok) - - dnl Check for the keypad function. - AC_MSG_CHECKING(for keypad) - AC_CACHE_VAL(vi_cv_have_curses_keypad, [dnl - AC_TRY_LINK([#include <curses.h>], [keypad(0, 0);], - [vi_cv_have_curses_keypad=yes], - [vi_cv_have_curses_keypad=no])]) - if test "$vi_cv_have_curses_keypad" = yes; then - AC_DEFINE(HAVE_CURSES_KEYPAD) - fi - AC_MSG_RESULT($vi_cv_have_curses_keypad) - - dnl Check for the newterm function. - AC_MSG_CHECKING(for newterm) - AC_CACHE_VAL(vi_cv_have_curses_newterm, [dnl - AC_TRY_LINK([#include <curses.h>], [newterm(0, 0, 0);], - [vi_cv_have_curses_newterm=yes], - [vi_cv_have_curses_newterm=no])]) - if test "$vi_cv_have_curses_newterm" = yes; then - AC_DEFINE(HAVE_CURSES_NEWTERM) - fi - AC_MSG_RESULT($vi_cv_have_curses_newterm) - - if test "$vi_cv_have_curses_newterm" = no; then - AC_DEFINE(HAVE_BSD_CURSES) - fi -fi - -dnl Check for the setupterm function. We make this check regardless of -dnl using the system library, because it may be part of the underlying -dnl termcap/termlib support, and we want to use the local one. -AC_MSG_CHECKING(for setupterm) -AC_CACHE_VAL(vi_cv_have_curses_setupterm, [dnl -AC_TRY_LINK([#include <curses.h>], [setupterm(0, 0, 0);], - [vi_cv_have_curses_setupterm=yes], - [vi_cv_have_curses_setupterm=no])]) -if test "$vi_cv_have_curses_setupterm" = yes; then - AC_DEFINE(HAVE_CURSES_SETUPTERM) -fi -AC_MSG_RESULT($vi_cv_have_curses_setupterm) - -dnl Some moron decided to drop off an argument from the gettimeofday call, -dnl without changing the name. -AC_MSG_CHECKING(for broken gettimeofday system call) -AC_CACHE_VAL(vi_cv_gettimeofday, [dnl -AC_TRY_LINK([#include <sys/types.h> -#include <sys/time.h>], [gettimeofday(0, 0);], - [vi_cv_gettimeofday=okay], [vi_cv_gettimeofday=broken])]) -if test "$vi_cv_gettimeofday" = broken; then - AC_DEFINE(HAVE_BROKEN_GETTIMEOFDAY) -fi -AC_MSG_RESULT($vi_cv_gettimeofday) - -dnl Check for which version of openpty to use, System V or Berkeley. -AC_MSG_CHECKING(for System V pty calls) -AC_CACHE_VAL(vi_cv_sys5_pty, [dnl -AC_TRY_LINK(, [grantpt(0);], - [vi_cv_sys5_pty=yes], [vi_cv_sys5_pty=no])]) -if test "$vi_cv_sys5_pty" = yes; then - AC_DEFINE(HAVE_SYS5_PTY) -fi -AC_MSG_RESULT($vi_cv_sys5_pty) - -dnl Check for the revoke system call. -AC_MSG_CHECKING(for revoke system call) -AC_CACHE_VAL(vi_cv_revoke, [dnl -AC_TRY_LINK(, [revoke("a");], - [vi_cv_revoke=yes], [vi_cv_revoke=no])]) -if test "$vi_cv_revoke" = yes; then - AC_DEFINE(HAVE_REVOKE) -fi -AC_MSG_RESULT($vi_cv_revoke) - -dnl Some versions of sprintf return a pointer to the first argument instead -dnl of a character count. We assume that the return value of snprintf and -dnl vsprintf etc. will be the same as sprintf, and check the easy one. -AC_MSG_CHECKING(for int type sprintf return value) -AC_CACHE_VAL(vi_cv_sprintf_count, [dnl -AC_TRY_RUN([main(){char buf[20]; exit(sprintf(buf, "XXX") != 3);}], - [vi_cv_sprintf_count=yes], [vi_cv_sprintf_count=no])]) -if test "$vi_cv_sprintf_count" = no; then - AC_DEFINE(SPRINTF_RET_CHARPNT) -fi -AC_MSG_RESULT($vi_cv_sprintf_count) - -dnl We compile in nvi's DB routines unless the user specifies otherwise. -AC_MSG_CHECKING(if --disable-db option specified) -AC_ARG_ENABLE(db, - [ --disable-db DON'T use the nvi-provided DB routines.], - [vi_cv_db_lib="other DB"], [vi_cv_db_lib="bundled DB"]) -AC_MSG_RESULT($vi_cv_db_lib) -case "$vi_cv_db_lib" in -"bundled DB") - CPPFLAGS="-I\$(srcdir)/db/include $CPPFLAGS" - LIBOBJS="\$(DBOBJS) $LIBOBJS";; -"other DB") - ;; -esac - -dnl We compile in nvi's RE routines unless the user specifies otherwise. -AC_MSG_CHECKING(if --disable-re option specified) -AC_ARG_ENABLE(re, - [ --disable-re DON'T use the nvi-provided RE routines.], - [vi_cv_re_lib="other RE"], [vi_cv_re_lib="bundled RE"]) -AC_MSG_RESULT($vi_cv_re_lib) -case "$vi_cv_re_lib" in -"bundled RE") - CPPFLAGS="-I\$(srcdir)/regex $CPPFLAGS" - LIBOBJS="\$(REOBJS) $LIBOBJS";; -"other RE") - ;; -esac - -dnl Check for the standard shorthand types. -AC_SUBST(u_char_decl) -AC_MSG_CHECKING(for u_char) -AC_CACHE_VAL(vi_cv_uchar, [dnl -AC_TRY_COMPILE([#include <sys/types.h>], u_char foo;, - [vi_cv_uchar=yes], [vi_cv_uchar=no])]) -AC_MSG_RESULT($vi_cv_uchar) -if test "$vi_cv_uchar" = no; then - u_char_decl="typedef unsigned char u_char;" -fi - -AC_SUBST(u_short_decl) -AC_MSG_CHECKING(for u_short) -AC_CACHE_VAL(vi_cv_ushort, [dnl -AC_TRY_COMPILE([#include <sys/types.h>], u_short foo;, - [vi_cv_ushort=yes], [vi_cv_ushort=no])]) -AC_MSG_RESULT($vi_cv_ushort) -if test "$vi_cv_ushort" = no; then - u_short_decl="typedef unsigned short u_short;" -fi - -AC_SUBST(u_int_decl) -AC_MSG_CHECKING(for u_int) -AC_CACHE_VAL(vi_cv_uint, [dnl -AC_TRY_COMPILE([#include <sys/types.h>], u_int foo;, - [vi_cv_uint=yes], [vi_cv_uint=no])]) -AC_MSG_RESULT($vi_cv_uint) -if test "$vi_cv_uint" = no; then - u_int_decl="typedef unsigned int u_int;" -fi - -AC_SUBST(u_long_decl) -AC_MSG_CHECKING(for u_long) -AC_CACHE_VAL(vi_cv_ulong, [dnl -AC_TRY_COMPILE([#include <sys/types.h>], u_long foo;, - [vi_cv_ulong=yes], [vi_cv_ulong=no])]) -AC_MSG_RESULT($vi_cv_ulong) -if test "$vi_cv_ulong" = no; then - u_long_decl="typedef unsigned long u_long;" -fi - -dnl DB/Vi use specific integer sizes. -AC_SUBST(u_int8_decl) -AC_MSG_CHECKING(for u_int8_t) -AC_CACHE_VAL(vi_cv_uint8, [dnl -AC_TRY_COMPILE([#include <sys/types.h>], u_int8_t foo;, - [vi_cv_uint8=yes], -AC_TRY_RUN([main(){exit(sizeof(unsigned char) != 1);}], - [vi_cv_uint8="unsigned char"], [vi_cv_uint8=no]))]) -AC_MSG_RESULT($vi_cv_uint8) -if test "$vi_cv_uint8" = no; then - echo - echo "Fatal error: no unsigned, 8-bit integral type." - exit 1 -fi -if test "$vi_cv_uint8" != yes; then - u_int8_decl="typedef $vi_cv_uint8 u_int8_t;" -fi - -AC_SUBST(u_int16_decl) -AC_MSG_CHECKING(for u_int16_t) -AC_CACHE_VAL(vi_cv_uint16, [dnl -AC_TRY_COMPILE([#include <sys/types.h>], u_int16_t foo;, - [vi_cv_uint16=yes], -AC_TRY_RUN([main(){exit(sizeof(unsigned short) != 2);}], - [vi_cv_uint16="unsigned short"], -AC_TRY_RUN([main(){exit(sizeof(unsigned int) != 2);}], - [vi_cv_uint16="unsigned int"], [vi_cv_uint16=no])))]) -AC_MSG_RESULT($vi_cv_uint16) -if test "$vi_cv_uint16" = no; then - echo - echo "Fatal error: no unsigned, 16-bit integral type." - exit 1 -fi -if test "$vi_cv_uint16" != yes; then - u_int16_decl="typedef $vi_cv_uint16 u_int16_t;" -fi - -AC_SUBST(int16_decl) -AC_MSG_CHECKING(for int16_t) -AC_CACHE_VAL(vi_cv_int16, [dnl -AC_TRY_COMPILE([#include <sys/types.h>], int16_t foo;, - [vi_cv_int16=yes], -AC_TRY_RUN([main(){exit(sizeof(short) != 2);}], - [vi_cv_int16="short"], -AC_TRY_RUN([main(){exit(sizeof(int) != 2);}], - [vi_cv_int16="int"], [vi_cv_int16=no])))]) -AC_MSG_RESULT($vi_cv_int16) -if test "$vi_cv_int16" = no; then - echo - echo "Fatal error: no signed, 16-bit integral type." - exit 1 -fi -if test "$vi_cv_int16" != yes; then - int16_decl="typedef $vi_cv_int16 int16_t;" -fi - -AC_SUBST(u_int32_decl) -AC_MSG_CHECKING(for u_int32_t) -AC_CACHE_VAL(vi_cv_uint32, [dnl -AC_TRY_COMPILE([#include <sys/types.h>], u_int32_t foo;, - [vi_cv_uint32=yes], -AC_TRY_RUN([main(){exit(sizeof(unsigned int) != 4);}], - [vi_cv_uint32="unsigned int"], -AC_TRY_RUN([main(){exit(sizeof(unsigned long) != 4);}], - [vi_cv_uint32="unsigned long"], [vi_cv_uint32=no])))]) -AC_MSG_RESULT($vi_cv_uint32) -if test "$vi_cv_uint32" = no; then - echo - echo "Fatal error: no unsigned, 32-bit integral type." - exit 1 -fi -if test "$vi_cv_uint32" != yes; then - u_int32_decl="typedef $vi_cv_uint32 u_int32_t;" -fi - -AC_SUBST(int32_decl) -AC_MSG_CHECKING(for int32_t) -AC_CACHE_VAL(vi_cv_int32, [dnl -AC_TRY_COMPILE([#include <sys/types.h>], int32_t foo;, - [vi_cv_int32=yes], -AC_TRY_RUN([main(){exit(sizeof(int) != 4);}], - [vi_cv_int32="int"], -AC_TRY_RUN([main(){exit(sizeof(long) != 4);}], - [vi_cv_int32="long"], [vi_cv_int32=no])))]) -AC_MSG_RESULT($vi_cv_int32) -if test "$vi_cv_int32" = no; then - echo - echo "Fatal error: no signed, 32-bit integral type." - exit 1 -fi -if test "$vi_cv_int32" != yes; then - int32_decl="typedef $vi_cv_int32 int32_t;" -fi - -AC_OUTPUT(Makefile port.h:port.h.in - pathnames.h:pathnames.h.in recover:recover.in) diff --git a/build/distrib b/build/distrib deleted file mode 100644 index 45dbe52f4049..000000000000 --- a/build/distrib +++ /dev/null @@ -1,84 +0,0 @@ -#! /bin/sh -# @(#)distrib 8.11 (Berkeley) 10/23/96 - -# Clean -#make -f Makefile.in clean -#rm -f configure config.h.in - -# Build autoconf structure. -echo "Running autoheader" -autoheader 2>&1 | sed '/warning: AC_TRY_RUN called without default/d' -chmod 444 config.h.in -echo "Running autoconf" -autoconf 2>&1 | sed '/warning: AC_TRY_RUN called without default/d' -chmod 555 configure config.guess config.sub install-sh - -# Build include files. -f=../include/cl_extern.h -echo "Building $f" -rm -f $f -sed -n "s/^ \* PUBLIC: \(.*\)/\1/p" ../cl/*.c > $f -chmod 444 $f - -f=../include/com_extern.h -echo "Building $f" -rm -f $f -sed -n "s/^ \* PUBLIC: \(.*\)/\1/p" ../clib/*.c ../common/*.c > $f -chmod 444 $f - -f=../include/ex_def.h -echo "Building $f" -rm -f $f -awk -f ../ex/ex.awk ../ex/ex_cmd.c > $f -chmod 444 $f - -f=../include/ex_extern.h -echo "Building $f" -rm -f $f -sed -n "s/^ \* PUBLIC: \(.*\)/\1/p" ../ex/*.c > $f -chmod 444 $f - -if [ -d ../ip ]; then - f=../include/ip_extern.h - echo "Building $f" - rm -f $f - sed -n "s/^ \* PUBLIC: \(.*\)/\1/p" ../ip/*.c > $f - chmod 444 $f -fi - -f=../include/options_def.h -echo "Building $f" -rm -f $f -awk -f ../common/options.awk ../common/options.c > $f -chmod 444 $f - -f=../include/perl_extern.h -echo "Building $f" -rm -f $f -sed -n "s/^ \* PUBLIC: \(.*\)/\1/p" ../perl_api/*.xs ../perl_api/*.c > $f -chmod 444 $f - -f=../include/tcl_extern.h -echo "Building $f" -rm -f $f -sed -n "s/^ \* PUBLIC: \(.*\)/\1/p" ../tcl_api/*.c > $f -chmod 444 $f - -f=../include/tk_extern.h -echo "Building $f" -rm -f $f -sed -n "s/^ \* PUBLIC: \(.*\)/\1/p" ../tk/*.c > $f -chmod 444 $f - -f=../include/vi_extern.h -echo "Building $f" -rm -f $f -sed -n "s/^ \* PUBLIC: \(.*\)/\1/p" ../vi/*.c > $f -chmod 444 $f - -# Build tags files. -echo "Building tags files" -rm -f tags -ctags -w -d ../cl/*.[ch] ../common/*.[ch] ../ex/*.[ch] ../perl_api/*.[ch] \ - ../tcl_api/*.[ch] ../tk/*.[ch] ../vi/*.[ch] -chmod 444 tags diff --git a/build/install-sh b/build/install-sh deleted file mode 100755 index ab74c882e923..000000000000 --- a/build/install-sh +++ /dev/null @@ -1,238 +0,0 @@ -#!/bin/sh -# -# install - install a program, script, or datafile -# This comes from X11R5. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. -# - - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" - - -# put in absolute paths if you don't have them in your path; or use env. vars. - -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" - -tranformbasename="" -transform_arg="" -instcmd="$mvprog" -chmodcmd="$chmodprog 0755" -chowncmd="" -chgrpcmd="" -stripcmd="" -rmcmd="$rmprog -f" -mvcmd="$mvprog" -src="" -dst="" -dir_arg="" - -while [ x"$1" != x ]; do - case $1 in - -c) instcmd="$cpprog" - shift - continue;; - - -d) dir_arg=true - shift - continue;; - - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - -s) stripcmd="$stripprog" - shift - continue;; - - -t=*) transformarg=`echo $1 | sed 's/-t=//'` - shift - continue;; - - -b=*) transformbasename=`echo $1 | sed 's/-b=//'` - shift - continue;; - - *) if [ x"$src" = x ] - then - src=$1 - else - # this colon is to work around a 386BSD /bin/sh bug - : - dst=$1 - fi - shift - continue;; - esac -done - -if [ x"$src" = x ] -then - echo "install: no input file specified" - exit 1 -else - true -fi - -if [ x"$dir_arg" != x ]; then - dst=$src - src="" - - if [ -d $dst ]; then - instcmd=: - else - instcmd=mkdir - fi -else - -# Waiting for this to be detected by the "$instcmd $src $dsttmp" command -# might cause directories to be created, which would be especially bad -# if $src (and thus $dsttmp) contains '*'. - - if [ -f $src -o -d $src ] - then - true - else - echo "install: $src does not exist" - exit 1 - fi - - if [ x"$dst" = x ] - then - echo "install: no destination specified" - exit 1 - else - true - fi - -# If destination is a directory, append the input filename; if your system -# does not like double slashes in filenames, you may need to add some logic - - if [ -d $dst ] - then - dst="$dst"/`basename $src` - else - true - fi -fi - -## this sed command emulates the dirname command -dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` - -# Make sure that the destination directory exists. -# this part is taken from Noah Friedman's mkinstalldirs script - -# Skip lots of stat calls in the usual case. -if [ ! -d "$dstdir" ]; then -defaultIFS=' -' -IFS="${IFS-${defaultIFS}}" - -oIFS="${IFS}" -# Some sh's can't handle IFS=/ for some reason. -IFS='%' -set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` -IFS="${oIFS}" - -pathcomp='' - -while [ $# -ne 0 ] ; do - pathcomp="${pathcomp}${1}" - shift - - if [ ! -d "${pathcomp}" ] ; - then - $mkdirprog "${pathcomp}" - else - true - fi - - pathcomp="${pathcomp}/" -done -fi - -if [ x"$dir_arg" != x ] -then - $doit $instcmd $dst && - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi -else - -# If we're going to rename the final executable, determine the name now. - - if [ x"$transformarg" = x ] - then - dstfile=`basename $dst` - else - dstfile=`basename $dst $transformbasename | - sed $transformarg`$transformbasename - fi - -# don't allow the sed command to completely eliminate the filename - - if [ x"$dstfile" = x ] - then - dstfile=`basename $dst` - else - true - fi - -# Make a temp file name in the proper directory. - - dsttmp=$dstdir/#inst.$$# - -# Move or copy the file name to the temp name - - $doit $instcmd $src $dsttmp && - - trap "rm -f ${dsttmp}" 0 && - -# and set any options; do chmod last to preserve setuid bits - -# If any of these fail, we abort the whole thing. If we want to -# ignore errors from any of these, just make sure not to ignore -# errors from the above "$doit $instcmd $src $dsttmp" command. - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && - -# Now rename the file to the real destination. - - $doit $rmcmd -f $dstdir/$dstfile && - $doit $mvcmd $dsttmp $dstdir/$dstfile - -fi && - - -exit 0 diff --git a/build/pathnames.h.in b/build/pathnames.h.in deleted file mode 100644 index 09cf97460ae8..000000000000 --- a/build/pathnames.h.in +++ /dev/null @@ -1,45 +0,0 @@ -/* @(#)pathnames.h.in 8.4 (Berkeley) 6/26/96 */ - -#ifndef _PATH_BSHELL -#define _PATH_BSHELL "@vi_cv_path_shell@" -#endif - -#ifndef _PATH_EXRC -#define _PATH_EXRC ".exrc" -#endif - -#ifndef _PATH_MSGCAT -#define _PATH_MSGCAT "./" -#endif - -#ifndef _PATH_NEXRC -#define _PATH_NEXRC ".nexrc" -#endif - -#ifndef _PATH_PRESERVE -#define _PATH_PRESERVE "@vi_cv_path_preserve@" -#endif - -#ifndef _PATH_SYSV_PTY -#define _PATH_SYSV_PTY "/dev/ptmx" -#endif - -#ifndef _PATH_SENDMAIL -#define _PATH_SENDMAIL "@vi_cv_path_sendmail@" -#endif - -#ifndef _PATH_SYSEXRC -#define _PATH_SYSEXRC "/etc/vi.exrc" -#endif - -#ifndef _PATH_TAGS -#define _PATH_TAGS "tags" -#endif - -#ifndef _PATH_TMP -#define _PATH_TMP "/tmp" -#endif - -#ifndef _PATH_TTY -#define _PATH_TTY "/dev/tty" -#endif diff --git a/build/port.h.in b/build/port.h.in deleted file mode 100644 index 6696848ecc7d..000000000000 --- a/build/port.h.in +++ /dev/null @@ -1,185 +0,0 @@ -/* @(#)port.h.in 8.13 (Berkeley) 6/12/96 */ - -/* - * Declare the basic types, if they aren't already declared. Named and - * some system's db.h files protect them with __BIT_TYPES_DEFINED__. - */ -#ifndef __BIT_TYPES_DEFINED__ -#define __BIT_TYPES_DEFINED__ -@u_int8_decl@ -@int16_decl@ -@u_int16_decl@ -@int32_decl@ -@u_int32_decl@ -#endif - -@u_char_decl@ -@u_short_decl@ -@u_int_decl@ -@u_long_decl@ - -/* - * XXX - * Handle function prototypes. This steps on name space that vi doesn't - * control, but all of the other solutions are worse. - */ -#undef __P -#if defined(__STDC__) || defined(__cplusplus) -#define __P(protos) protos /* ANSI C prototypes */ -#else -#define __P(protos) () /* K&R C preprocessor */ -#endif - -/* - * XXX - * Some versions of System V changed the number of arguments to gettimeofday - * without changing the name. - */ -#ifdef HAVE_BROKEN_GETTIMEOFDAY -#define gettimeofday(tv, tz) gettimeofday(tv) -#endif - -/* - * XXX - * If we don't have mmap, we fake it with read and write, but we'll - * still need the header information. - */ -#ifndef HAVE_SYS_MMAN_H -#define MAP_SHARED 1 /* share changes */ -#define MAP_PRIVATE 2 /* changes are private */ -#define PROT_READ 0x1 /* pages can be read */ -#define PROT_WRITE 0x2 /* pages can be written */ -#define PROT_EXEC 0x4 /* pages can be executed */ -#endif - -/* - * XXX - * POSIX 1003.1 names for file descriptors. - */ -#ifndef STDERR_FILENO -#define STDIN_FILENO 0 /* ANSI C #defines */ -#define STDOUT_FILENO 1 -#define STDERR_FILENO 2 -#endif - -/* - * XXX - * POSIX 1003.1 names for seek settings. - */ -#ifndef SEEK_END -#define SEEK_SET 0 /* POSIX 1003.1 seek values */ -#define SEEK_CUR 1 -#define SEEK_END 2 -#endif - -/* - * Hack _POSIX_VDISABLE to \377 since Ultrix doesn't honor _POSIX_VDISABLE - * (treats it as ^@). The symptom is that the ^@ keystroke immediately - * drops core. - */ -#ifdef HAVE_BROKEN_VDISABLE -#undef _POSIX_VDISABLE -#define _POSIX_VDISABLE ((unsigned char)'\377') -#endif - -/* - * XXX - * POSIX 1003.1 tty disabling character. - */ -#ifndef _POSIX_VDISABLE -#define _POSIX_VDISABLE 0 /* Some systems used 0. */ -#endif - -/* - * XXX - * 4.4BSD extension to only set the software termios bits. - */ -#ifndef TCSASOFT /* 4.4BSD extension. */ -#define TCSASOFT 0 -#endif - -/* - * XXX - * POSIX 1003.1 maximum path length. - */ -#ifndef MAXPATHLEN -#ifdef PATH_MAX -#define MAXPATHLEN PATH_MAX -#else -#define MAXPATHLEN 1024 -#endif -#endif - -/* - * XXX - * MIN, MAX, historically in <sys/param.h> - */ -#ifndef MAX -#define MAX(_a,_b) ((_a)<(_b)?(_b):(_a)) -#endif -#ifndef MIN -#define MIN(_a,_b) ((_a)<(_b)?(_a):(_b)) -#endif - -/* - * XXX - * "DB" isn't always portable, and we want the private information. - */ -#define DB L__DB -#undef pgno_t /* IRIX has its own version. */ -#define pgno_t L__db_pgno_t - -/* - * XXX - * 4.4BSD extension to provide lock values in the open(2) call. - */ -#ifndef O_EXLOCK -#define O_EXLOCK 0 -#endif - -#ifndef O_SHLOCK -#define O_SHLOCK 0 -#endif - -/* - * XXX - * POSIX 1003.1 bad file format errno. - */ -#ifndef EFTYPE -#define EFTYPE EINVAL -#endif - -/* - * XXX - * POSIX 1003.2 RE length limit. - */ -#ifndef _POSIX2_RE_DUP_MAX -#define _POSIX2_RE_DUP_MAX 255 -#endif - -/* - * XXX - * 4.4BSD extension to determine if a program dropped core from the exit - * status. - */ -#ifndef WCOREDUMP -#define WCOREDUMP(a) 0 -#endif - -/* - * XXX - * Endian-ness of the machine. - */ -#if !defined(LITTLE_ENDIAN) -#define LITTLE_ENDIAN 1234 -#endif -#if !defined(BIG_ENDIAN) -#define BIG_ENDIAN 4321 -#endif -#if !defined(BYTE_ORDER) -#if WORDS_BIGENDIAN == 1 -#define BYTE_ORDER BIG_ENDIAN -#else -#define BYTE_ORDER LITTLE_ENDIAN -#endif -#endif diff --git a/build/recover.in b/build/recover.in deleted file mode 100644 index cfaf75f2c287..000000000000 --- a/build/recover.in +++ /dev/null @@ -1,49 +0,0 @@ -#!/bin/sh - -# -# @(#)recover.in 8.8 (Berkeley) 10/10/96 -# -# Script to recover nvi edit sessions. - -RECDIR="@vi_cv_path_preserve@" -SENDMAIL="@vi_cv_path_sendmail@" - -echo 'Recovering nvi editor sessions.' - -# Check editor backup files. -vibackup=`echo $RECDIR/vi.*` -if [ "$vibackup" != "$RECDIR/vi.*" ]; then - for i in $vibackup; do - # Only test files that are readable. - if test ! -r $i; then - continue - fi - - # Unmodified nvi editor backup files either have the - # execute bit set or are zero length. Delete them. - if test -x $i -o ! -s $i; then - rm $i - fi - done -fi - -# It is possible to get incomplete recovery files, if the editor crashes -# at the right time. -virecovery=`echo $RECDIR/recover.*` -if [ "$virecovery" != "$RECDIR/recover.*" ]; then - for i in $virecovery; do - # Only test files that are readable. - if test ! -r $i; then - continue - fi - - # Delete any recovery files that are zero length, corrupted, - # or that have no corresponding backup file. Else send mail - # to the user. - recfile=`awk '/^X-vi-recover-path:/{print $2}' < $i` - if test -n "$recfile" -a -s "$recfile"; then - $SENDMAIL -t < $i - else - rm $i - fi - done -fi diff --git a/build/spell.ok b/build/spell.ok deleted file mode 100644 index fc103f43602d..000000000000 --- a/build/spell.ok +++ /dev/null @@ -1,58 +0,0 @@ -ADDCPPFLAGS -ADDLDFLAGS -ADDLIBS -CPPFLAGS -FreeBSD -LDFLAGS -LIBS -Lite -NVI -NVI'S -NetBSD -Nvi -POSIX -Perl -README -Tcl -Tk -asnvi -asvi -autoconf -bindir -cd -contrib -csh -datadir -datafiles -db -distclean -env -filesystem -foo -gcc -ksh -lcurses -ldb -lm -lperl -ltcl -ltermcap -ltermlib -ltk -mandir -mkdir -ncurses -nex -nvi -nview -perl -perlinterp -setenv -sh -tcl -tclinterp -tcsh -terminfo -tknvi -usr -vi diff --git a/catalog/Makefile b/catalog/Makefile index 1044051ff389..11e71cce6d7b 100644 --- a/catalog/Makefile +++ b/catalog/Makefile @@ -1,7 +1,8 @@ -# @(#)Makefile 8.29 (Berkeley) 10/19/96 +# $Id: Makefile,v 9.0 2012/10/19 15:13:11 zy Exp $ -CAT= dutch english french german ru_SU.KOI8-R spanish swedish -FILES= ../cl/*.c ../common/*.c ../ex/*.c ../tk/*.c ../vi/*.c +CAT= dutch english french german polish ru_RU.KOI8-R spanish swedish \ + uk_UA.KOI8-U zh_CN.GB2312 +FILES= ../cl/*.c ../common/*.c ../ex/*.c ../vi/*.c all: dump ${CAT} @@ -18,13 +19,10 @@ ${CAT}: english.base print "DUPLICATE MESSAGE NUMBER " $$1; \ exit 1; \ } \ - for (; nline < $$1; ++nline) \ - print ""; \ print $0; \ }' | \ - sed -e '1s/^/VI_MESSAGE_CATALOG/' \ - -e '/"/s/^[^"]*"//' \ - -e '1!s/"$$/X/' > $@; \ + sed -e '1s/^/$$set 1~$$quote "~/; 1y/~/\n/' | \ + gencat $@ /dev/stdin; \ chmod 444 $@; \ if grep DUPLICATE $@ > /dev/null; then \ grep DUPLICATE $@; \ @@ -34,7 +32,8 @@ ${CAT}: english.base fi CHK= dutch.check english.check french.check german.check \ - ru_SU.KOI8-R.check spanish.check swedish.check + polish.check ru_RU.KOI8-R.check spanish.check swedish.check \ + uk_UA.KOI8-U.check zh_CN.GB2312.check check: ${CHK} ${CHK}: ${CAT} @echo "... $@"; \ @@ -63,19 +62,14 @@ ${CHK}: ${CAT} echo "Duplicate messages, both id and message (this is okay):"; \ sed '/^$$/d' < $$f.base | sort | uniq -c | \ awk '$$1 != 1 { print $$0 }' | sort -n; \ - echo =========================; \ - echo "Duplicate messages, just message (this is okay):"; \ - sed '/^$$/d' < $$f | sort | uniq -c | \ - awk '$$1 != 1 { print $$0 }' | sort -n; \ echo =========================) > $@ english.base: dump ${FILES} #Makefile ./dump ${FILES} |\ sed -e '/|/!d' \ -e 's/|/ "/' \ - -e 's/^"//' \ - -e 's/\\"/"/g' |\ - sort -n > $@ + -e 's/^"//' |\ + sort -nu > $@ dump: dump.c ${CC} -O -o dump dump.c diff --git a/catalog/README b/catalog/README index 15a706358869..42a728afbe2e 100644 --- a/catalog/README +++ b/catalog/README @@ -1,15 +1,9 @@ -# @(#)README 8.4 (Berkeley) 11/22/94 +# $Id: README,v 9.0 2012/10/19 17:06:15 zy Exp $ Generally, all non-system error and informational messages in nvi are catalog messages, i.e. they can be tailored to a specific langauge. -Command strings, usage strings, system errors and other "known text" -are not. It would certainly be possible to internationalize all the -text strings in nvi, but it's unclear that it's the right thing to do. - -First, there's no portable way to do message catalogs. The System V -scheme is a reasonable choice, but none of the 4BSD derived systems -support it. So, catalogs are completely implemented within nvi, and -don't require any library support. +Command strings, usage strings, system errors and other 'known text' +are not. Message catalogs in nvi are fairly simple. Every catalog message consists of two parts -- an initial number followed by a pipe (`|') @@ -33,19 +27,7 @@ For example: msgq(sp, M_ERR, "002|Error: %d %x", arg1, arg2); -is a format string that displays two arguments. It is possible, however, -to reorder the arguments or to not display all of them. The convention -nvi uses is the System V printf(3) convention, i.e. "%[0-9]*$" is the name -of a specific, numbered argument. For example: - - msgq(sp, M_ERR, "002|Error: %2$d %1$x", arg1, arg2); - -displays the arguments in reverse order. - -If the system supports this convention in its library printf routines -(as specified by the test #define NL_ARGMAX), nvi uses those routines. -Otherwise, there is some serious magic going on in common/msg.c to make -this all work. +is a format string that displays two arguments. Arguments to the msgq function are required to contain ONLY printable characters. No further translation is done by the msgq routine before @@ -54,14 +36,16 @@ displaying the message on the screen. For example, in the msgq call: msgq(sp, M_ERR, "003|File: %s", file_name); "file_name" must contain only printable characters. The routine -msg_print() returns a printable version of a string in allocated -memory. For example: +msg_print() returns a printable version of a string; the third argument +indicates whether the string needs to be freed. For example: char *p; + int nf; - p = msg_print(sp, file_name); - msgq(sp, M_ERR, M("003", "File: %s"), p); - FREE_SPACE(sp, p, 0); + p = msg_print(sp, file_name, &nf); + msgq(sp, M_ERR, "003|File: %s", p); + if (nf) + FREE_SPACE(sp, p, 0); makes sure that "file_name" is printable before calling the msgq routine. @@ -71,63 +55,40 @@ routine. The message catalogs themselves are maintained in two files. The first is the "base file" which contains two fields, a record number and the message itself. All base files are named using the convention -"vi_<language>.base", e.g. the English one is "vi_english.base". For +"<language>.base", e.g. the English one is "english.base". For example: - 002 "Unable to create temporary file" - 003 "Warning: %s is not a regular file" - 004 "%s already locked, session is read-only" - 005 "%s: remove" - 006 "%s: close" - 007 "%s: remove" - 008 "%s: remove" - 009 "Read-only file, not written; use ! to override" - 010 "Read-only file, not written" - -are the first few lines of the current vi_english.base file. Note that -message #1 is missing -- the first message of each catalog is a special -one, so that nvi can recognize message catalog files. It's added by the -Makefile script that creates the second version of the message catalog. - -The second file is the file used by nvi to access messages, and is a list -of the messages, one per line: - - VI_MESSAGE_CATALOG - Unable to create temporary fileX - Warning: %s is not a regular fileX - %s already locked, session is read-onlyX - %s: removeX - %s: closeX - %s: removeX - %s: removeX - Read-only file, not written; use ! to overrideX - Read-only file, not writtenX - -Note that all messages have had a trailing 'X' character appended. This -is to provide nvi a place to store a trailing nul for the message so that -C library routines that expect one won't be disappointed. - -These files are named for their language, e.g. "vi_english". The second -files are automatically created from the first files. + 002 "Line length overflow" + 003 "unable to delete line %lu" + 004 "unable to append to line %lu" + 005 "unable to insert at line %lu" + 006 "unable to store line %lu" + 007 "unable to get last line" -To create a new catalog for nvi: +are the first few lines of the current english.base file. -Copy the file vi_english.base to a file that you can modify , e.g. "cp -vi_english.base vi_german.base". For each of the messages in the file, -replace the message with the string that you want to use. To find out -what the arguments to a message are, I'm afraid you'll have to search -the source code for the message number. You can find them fairly quickly -by doing: +Before this file being converted to the second file, the POSIX formatted +message catalog file, by gencat(1), two lines: - cd ..; egrep '123\|' */*.[chys] + $set 1 + $quote " + +will be inserted before the base text to setup the set_id and the quote +character. So the double-quote needs to be escaped by a backslash to be +included in a message; same as the backslash itself. + +These files are named for their language, e.g. "english". However, a +locale(1) name is also recommended. + +To create a new catalog for nvi: -I'm sorry that there's not an easier way, but I couldn't think of -anything that wasn't a lot of work. +Copy the file english.base to a file that you can modify , e.g. "cp +english.base german.base". For each of the messages in the file, +replace the message with the string that you want to use. If you have +doubts about the meaning of a message, just email me. -If, for some reason, you don't have the file vi_english.base, or you -have new sources for which you want to create a new base catalog, you -can create it by running the command "make english" in the catalog -directory. +A latest english.base can be created from source by running the command +"make english" in the catalog/ directory. Once you've translated all of the strings, then add your catalog to the "CAT=" line of the Makefile, and run the command "make catalog". This @@ -156,11 +117,11 @@ a single place. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= To select a catalog when running nvi, set the "msgcat" option. If the value of this option ends with a '/', it is treated as the name of a -directory that contains a message catalog "vi_XXXX", where XXXX is the -value of the LANG environmental variable, if it's set, or the value of -the LC_MESSAGES environmental variable if it's not. If neither of those -environmental variables are set, or if the option doesn't end in a '/', -the option is treated as the full path name of the message catalog to use. +directory that contains a message catalog "$LC_MESSAGES", which is set +through the LC_MESSAGES environment variable but returned by setlocale(3). +Check the output of locale(1) to validate such a value. If the option +doesn't end in a '/', the option is treated as the full path name of the +message catalog to use. If any messages are missing from the catalog, the backup text (English) is used instead. diff --git a/catalog/dump.c b/catalog/dump.c index 0b3cd26520d5..4cd39df863b2 100644 --- a/catalog/dump.c +++ b/catalog/dump.c @@ -2,43 +2,17 @@ * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the University of - * California, Berkeley and its contributors. - * 4. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. + * %sccs.include.redist.c% */ #ifndef lint static char copyright[] = -"@(#) Copyright (c) 1992, 1993, 1994\n\ +"%Z% Copyright (c) 1992, 1993, 1994\n\ The Regents of the University of California. All rights reserved.\n"; #endif /* not lint */ #ifndef lint -static char sccsid[] = "@(#)dump.c 8.1 (Berkeley) 8/31/94"; +static char sccsid[] = "$Id: dump.c,v 8.2 2011/07/14 00:05:25 zy Exp $"; #endif /* not lint */ #include <ctype.h> @@ -105,10 +79,10 @@ main(argc, argv) for (; *argv != NULL; ++argv) { if ((fp = fopen(*argv, "r")) == NULL) { perror(*argv); - exit (1); + return (1); } parse(fp); (void)fclose(fp); } - exit (0); + return (0); } diff --git a/catalog/dutch b/catalog/dutch deleted file mode 100644 index de9fb603bf8e..000000000000 --- a/catalog/dutch +++ /dev/null @@ -1,317 +0,0 @@ -VI_MESSAGE_CATALOG -regel te langX -kan regel %lu niet verwijderenX -kan niet toevoegen aan regel %luX -kan niet invoegen vooraan regel %luX -kan regel %lu niet opslaanX -kan laatste regel niet lezenX -Fout: kan regel %lu niet vindenX -log bestandX -Er vindt geen logging plaats, kan wijzigingen niet ongedaan makenX -geen wijzigingen om ongedaan te makenX -Er vindt geen logging plaats, kan wijzigingen niet ongedaan makenX -Er vindt geen logging plaats, herhaling niet mogelijkX -geen wijzigingen om te herhalenX -%s/%d: schrijven naar log misluktX -Vi's standaard invoer en uitvoer moeten aan een terminal gekoppeld zijnX -Merk %s: niet gezetX -Merk %s: de regel is verwijderdX -Merk %s: de cursor positie bestaat niet meerX -Fout: X -nieuw bestandX -naam veranderdX -gewijzigdX -ongewijzigdX -NIET BEVEILIGDX -niet schrijfbaarX -regel %lu uit %lu [%ld%%]X -leeg bestandX -regel %luX -Het bestand %s is geen message catalogX -Niet in staat om de standaard %s optie in te stellenX -Gebruik: %sX -set: optie %s onbekend: 'set all' laat alle opties zienX -set: [no]%s optie kan geen waarde hebbenX -set: %s optie moet een waarde hebbenX -set: %s optie: %sX -set: %s optie: %s: getal is te grootX -set: %s optie: %s is een ongeldige waardeX -set: %s optie moet een waarde hebbenX -Te weinig kolommen op het scherm, minder dan %dX -Aantal kolommen te groot, meer dan %dX -Te weinig regels op het scherm, minder dan %dX -Aantal regels te groot, meer dan %dX -De lisp optie is niet ondersteundX -messages niet uitgeschakeld: %sX -messages niet geactiveerd: %sX - -De paragraph optie moet karakter paren bevattenX -De section optie moet karakter paren bevattenX - - - -De standaard buffer is leegX -Buffer %s is leegX -Bestanden met newlines in de naam kunnen niet hersteld wordenX -Wijzigingen kunnen niet ongedaan gemaakt worden als deze sessie misluktX -Bestand wordt gecopieerd voor herstel...X -Herstel mechanisme werkt niet: %sX -Wijzigingen kunnen niet ongedaan gemaakt worden als deze sessie misluktX -Kon bestand niet veilig stellen: %sX -Bestand wordt gecopieerd voor herstel...X -Informatie met betrekking tot gebruiker nummer %u niet gevondenX -Kan herstel bestand niet beveiligenX -herstel buffer overgelopenX -herstel bestandX -%s: verminkt herstel bestandX -%s: verminkt herstel bestandX -U heeft geen bestand genaamd %s te herstellenX -U kan eerdere versies van dit bestand herstellenX -U kan nog meer bestanden herstellenX -kan geen email versturen: %sX -Bestand leeg; niets om te doorzoekenX -Einde van het bestand bereikt zonder dat het patroon gevonden isX -Geen vorig zoek patroonX -Patroon niet gevondenX -Begin van het bestand bereikt zonder dat het patroon gevonden isX -Zoek-operatie omgeslagenX -Bezig met zoeken...X -Geen niet-printbaar karakter gevondenX -Onbekend commandoX - -Commando niet beschikbaar in ex modeX -Aantal mag niet nul zijnX -%s: ongeldige regel aanduidingX -Interne fout in syntax tabel (%s: %s)X -Gebruik: %sX -%s: tijdelijke buffer niet vrijgegevenX -Vlag offset voor regel 1X -Vlag offset voorbij bestands eindeX -bestand/scherm veranderd tijdens uitvoeren van @ in een blokX -bestand/scherm veranderd tijdens uitvoeren van globaal/v commandoX -Ex commando mislukt: rest van commando(s) genegeerdX -Ex commando mislukt: gemappede toetsen genegeerdX -Het tweede adres is kleiner dan het eersteX -Geen merk naam opgegevenX -\\ niet gevolgd door / of ?X -Referentie aan een regel nummer kleiner dan 0X -Het %s commando is onbekendX -Adres waarde te grootX -Adres waarde te kleinX -Ongeldige adres combinatieX -Ongeldig adres: slechts %lu regels in het bestand aanwezigX -Ongeldig adres: het bestand is leegX -Het %s commando staat het adres 0 niet toeX -Geen afkortingen om weer te gevenX -Afkortingen moeten eindigen met een "woord" letterX -Afkortingen mogen geen tabulaties of spaties bevattenX -Afkortingen mogen geen woord/niet-woord karakters mengen, behalve aan het eindeX -"%s" is geen afkortingX -Vi commando mislukt: gemappede toetsen genegeerdX -Dit is het laatste bestandX -Dit is het eerste bestandX -Dit is het eerste bestandX -lijst met bestanden is leegX -Geen voorgaand commando om "!" te vervangenX -Geen bestandsnaam voor %%X -Geen bestandsnaam voor #X -Fout: execl: %sX -I/O fout: %sX -Bestand gewijzigd sinds laatste schrijfactie; schrijf het weg of gebruik ! om het te forcerenX -Kan uw home directory niet vindenX -Nieuwe huidige directory: %sX -Geen cut buffers aanwezigX -Het %s commando kan niet gebruikt worden in een globaal of v commandoX -%s/%s: niet gelezen: noch U noch root is de eigenaarX -%s/%s: niet gelezen: U bent niet de eigenaarX -%s/%s: niet gelezen: kan gewijzigd worden door andere gebruikersX -%s: niet gelezen: noch U noch root is de eigenaar"X -%s: niet gelezen: U bent niet de eigenaarX -%s: niet gelezen: kan gewijzigd worden door andere gebruikersX -Geen volgende regel om samen te voegenX -Geen input map entriesX -Geen command map entriesX -Het %s karakter kan niet ge-remapped wordenX -"%s" is niet gemappedX -Merk naam moet een enkel karakter zijnX -%s bestaat al, niet weggeschreven; gebruik ! om het te forcerenX -Nieuw .exrc bestand: %s. X -doel regel ligt in het blokX -Het open commando vereist dat de open optie actief isX -Het open commando is nog niet ondersteundX -Kan dit bestand niet veilig stellenX -Bestand veilig gesteldX -%s resulteert in te veel bestandsnamenX -Alleen echte bestanden en named pipes kunnen gelezen wordenX -%s: lees beveiliging niet beschikbaarX -Bezig met lezen...X -%s: %lu regels, %lu karaktersX -Geen achtergrond schermen aanwezigX -Het script commando is alleen beschikbaar in vi modeX -Geen comando om uit te voerenX -shiftwidth optie op 0 gezetX -Count te grootX -Count te kleinX -Reguliere expressie opgegeven; r vlag heeft geen betekenisX -De #, l en p vlaggen kunnen niet gecombineerd worden met de c vlag in vi modeX -Geen match gevondenX -Geen voorafgaande tag aanwezigX -Minder dan %s elementen op de tags stapel; gebruik :display t[ags]X -Geen bestand genaamd %s op de tags stapel; gebruik :display t[ags]X -Kies Enter om door te gaan: X -%s: tag niet gevondenX -%s: verminkte tag in %sX -%s: Het regel nummer van deze tag is voorbij het einde van het bestandX -De tags stapel is leegX -%s: zoek patroon niet gevondenX -%d andere bestanden te wijzigenX -Buffer %s is leegX -Bevestig wijziging? [n]X -OnderbrokenX -Geen voorafgaande buffer om uit te voerenX -Geen vorige reguliere expressieX -Het %s commando vereist dat er een bestand geladen isX -Gebruik: %sX -Het visual commando vereist dat de open optie actief isX - -Leeg bestandX -Geen voorafgaand F, f, T of t zoek commandoX -%s niet gevondenX -Geen voorafgaand bestand te bewerkenX -Cursor niet op een getalX -Getal wordt te grootX -Getal wordt te kleinX -Geen overeenkomstig karakter op deze regelX -Overeenkomstig karakter niet gevondenX -Geen karakters te vervangenX -Geen ander scherm aanwezigX -Karakters achter het zoek patroon, de regel offset, en/of het z commandoX -Geen voorafgaand zoek patroonX -Zoekopdracht na omslag teruggekeerd op originele positieX -Afkorting overschrijdt expansie limiet: karakters genegeerdX -Ongeldig karakter; quote to enterX -Reeds aan het begin van de invoerX -Niet meer karakters te verwijderenX -Verplaatsing voorbij het einde van het bestandX -Verplaatsing voorbij het einde van de regelX -Cursor niet verplaatstX -Reeds aan het begin van het bestandX -Verplaatsing voorbij het begin van het bestandX -Reeds in de eerste kolomX -Buffers moeten voor het commando opgegeven wordenX -Reeds bij het einde van het bestandX -Reeds bij het einde van de regelX -%s is geen vi commandoX -Gebruik: %sX -Geen karakters te verwijderenX -Het Q commando vereist de ex terminal interfaceX -Geen commando om te herhalenX -Het bestand is leegX -%s mag niet gebruikt worden als een verplaatsings commandoX -Al in commando modeX -Cursor niet in een woordX - -Windows optie waarde is te groot, maximum is %uX -ToevoegenX -VeranderenX -CommandoX -InvoegenX -VervangenX -Verplaatsing voorbij het eind van het schermX -Verplaatsing voorbij het begin van het schermX -Scherm moet meer dan %d regels hebben om het te kunnen splitsenX -Er zijn geen achtergrond schermenX -Er is geen achtergrond scherm waarin U bestand %s aan het bewerken bentX -U kan uw enige scherm niet in de achtergrond zettenX -Het scherm kan slechts verkleind worden tot %d regelsX -Het scherm kan niet kleinerX -Het scherm kan niet groterX - -Dit scherm kan niet gesuspend wordenX -Onderbroken: gemappede toetsen genegeerdX -vi: tijdelijke buffer niet vrijgegevenX -Deze terminal heeft geen %s toetsX -Er kan slechts een buffer opgegeven wordenX -Getal groter dan %luX -OnderbrokenX -Aanmaken van tijdelijk bestand is misluktX -Waarschuwing: %s is geen regulier bestandX -%s is al geopend, bestand is in deze sessie niet schrijfbaarX -%s: verwijdering misluktX -%s: sluiting misluktX -%s: verwijdering misluktX -%s: verwijdering misluktX -Bestand niet schrijfbaar, niet weggeschreven; gebruik ! om het te forcerenX -Bestand niet schrijfbaar, niet weggeschrevenX -%s bestaat al, niet weggeschreven; gebruik ! om het te forcerenX -%s bestaat al, niet weggeschrevenX -Gebruik ! om een incompleet bestand weg te schrijvenX -Bestand incompleet, niet weggeschrevenX -%s: bestand op disk nieuwer dan deze versie; gebruik ! om het te forcerenX -%s: bestand op disk nieuwer dan deze versieX -%s: schrijf beveiliging niet beschikbaarX -Bezig met schrijven...X -%s: WAARSCHUWING: BESTAND INCOMPLEETX -Reeds op de eerste tag van deze groepX -%s: nieuw bestand: %lu regels, %lu karaktersX -%s: %lu regels, %lu karaktersX -%s resulteert in te veel bestandsnamenX -%s: geen normaal bestandX -%s: U bent niet de eigenaarX -%s: kan gewijzigd worden door andere gebruikersX -Bestand gewijzigd sinds laatste schrijfactie; schrijf het weg of gebruik ! om het te forcerenX -Bestand gewijzigd sinds laatste schrijfactie; schrijf het weg of gebruik :edit! om het te forcerenX -Bestand gewijzigd sinds laatste schrijfactie; schrijf het weg of gebruik ! om het te forcerenX -Tijdelijk bestand; exit negeert wijzigingenX -Bestand niet schrijfbaar, wijzigingen niet automatisch weggeschrevenX -log opnieuw gestartX -Bevestig? [ynq]X -Druk op een toets om door te gaan: X -Druk op een toets om door te gaan [: voor meer ex commandos]: X -Druk op een toets om door te gaan [q om te stoppen]: X -Deze vorm van %s vereist de ex terminal interfaceX -Entering ex input mode.X -Commando mislukt, nog geen bestand geladen.X - doorgaan?X -Onverwacht character eventX -Onverwacht end-of-file eventX -Geen match gevonden voor dit patroonX -Onverwacht interrupt eventX -Onverwacht quit eventX -Onverwacht repaint eventX -Reeds op de laatste tag van deze groepX -Het %s command vereist de ex terminal interfaceX -Deze vorm van %s is niet ondersteund als de secure edit optie actief isX -Onverwacht string eventX -Onverwacht timeout eventX -Onverwacht write eventX - -Shell expansies zijn niet ondersteund als de secure edit optie actief isX -Het %s commando is niet ondersteund als de secure edit optie actief isX -set: %s mag niet uitgezet wordenX -Scherm te klein.X -toegevoegdX -gewijzigdX -verwijderdX -samengevoegdX -verplaatstX -verschovenX -gebufferdX -regelX -regelsX -Vi was niet geladen met een Tcl interpreterX -Bestand gewijzigd sinds het de laatste keer weg is geschreven.X -Shell expansie misluktX -Geen %s edit optie opgegevenX -Vi was niet geladen met een Perl interpreterX -Geen ex commando om uit te voerenX -Kies <CR> om commando uit te voeren, :q om te stoppenX -Gebruik "cscope help" voor uitlegX -Nog geen cscope connectie aanwezigX -%s: onbekend zoek type: gebruik een van %sX -%d: onbekende cscope sessieX -set: de %s optie mag nooit aangezet wordenX -set: de %s optie mag nooit op 0 gezet wordenX -%s: toegevoegd: %lu regels, %lu karaktersX -Onverwacht resize eventX -%d bestanden te wijzigenX diff --git a/catalog/dutch.base b/catalog/dutch.base index 2d8667e6d460..eca193c28c04 100644 --- a/catalog/dutch.base +++ b/catalog/dutch.base @@ -43,8 +43,7 @@ 044 "De lisp optie is niet ondersteund" 045 "messages niet uitgeschakeld: %s" 046 "messages niet geactiveerd: %s" -048 "De paragraph optie moet karakter paren bevatten" -049 "De section optie moet karakter paren bevatten" +047 "De %s optie moet karakter paren bevatten" 053 "De standaard buffer is leeg" 054 "Buffer %s is leeg" 055 "Bestanden met newlines in de naam kunnen niet hersteld worden" @@ -97,16 +96,16 @@ 103 "Ongeldig adres: het bestand is leeg" 104 "Het %s commando staat het adres 0 niet toe" 105 "Geen afkortingen om weer te geven" -106 "Afkortingen moeten eindigen met een "woord" letter" +106 "Afkortingen moeten eindigen met een \"woord\" letter" 107 "Afkortingen mogen geen tabulaties of spaties bevatten" 108 "Afkortingen mogen geen woord/niet-woord karakters mengen, behalve aan het einde" -109 ""%s" is geen afkorting" +109 "\"%s\" is geen afkorting" 110 "Vi commando mislukt: gemappede toetsen genegeerd" 111 "Dit is het laatste bestand" 112 "Dit is het eerste bestand" 113 "Dit is het eerste bestand" 114 "lijst met bestanden is leeg" -115 "Geen voorgaand commando om "!" te vervangen" +115 "Geen voorgaand commando om \"!\" te vervangen" 116 "Geen bestandsnaam voor %%" 117 "Geen bestandsnaam voor #" 118 "Fout: execl: %s" @@ -119,14 +118,14 @@ 125 "%s/%s: niet gelezen: noch U noch root is de eigenaar" 126 "%s/%s: niet gelezen: U bent niet de eigenaar" 127 "%s/%s: niet gelezen: kan gewijzigd worden door andere gebruikers" -128 "%s: niet gelezen: noch U noch root is de eigenaar"" +128 "%s: niet gelezen: noch U noch root is de eigenaar" 129 "%s: niet gelezen: U bent niet de eigenaar" 130 "%s: niet gelezen: kan gewijzigd worden door andere gebruikers" 131 "Geen volgende regel om samen te voegen" 132 "Geen input map entries" 133 "Geen command map entries" 134 "Het %s karakter kan niet ge-remapped worden" -135 ""%s" is niet gemapped" +135 "\"%s\" is niet gemapped" 136 "Merk naam moet een enkel karakter zijn" 137 "%s bestaat al, niet weggeschreven; gebruik ! om het te forceren" 138 "Nieuw .exrc bestand: %s. " @@ -296,7 +295,7 @@ 306 "Vi was niet geladen met een Perl interpreter" 307 "Geen ex commando om uit te voeren" 308 "Kies <CR> om commando uit te voeren, :q om te stoppen" -309 "Gebruik "cscope help" voor uitleg" +309 "Gebruik \"cscope help\" voor uitleg" 310 "Nog geen cscope connectie aanwezig" 311 "%s: onbekend zoek type: gebruik een van %s" 312 "%d: onbekende cscope sessie" diff --git a/catalog/dutch.check b/catalog/dutch.check deleted file mode 100644 index d651aec75cc2..000000000000 --- a/catalog/dutch.check +++ /dev/null @@ -1,37 +0,0 @@ -Unused message id's (this is okay): -001 -047 -050 -051 -052 -081 -176 -213 -229 -288 -========================= -MISSING ERROR MESSAGES (Please add!): -========================= -Extra error messages (just delete them): -========================= -MESSAGES WITH THE SAME MESSAGE ID's (FIX!): -========================= -Duplicate messages, both id and message (this is okay): -========================= -Duplicate messages, just message (this is okay): - 2 %s bestaat al, niet weggeschreven; gebruik ! om het te forcerenX - 2 %s resulteert in te veel bestandsnamenX - 2 %s: %lu regels, %lu karaktersX - 2 %s: verminkt herstel bestandX - 2 Bestand wordt gecopieerd voor herstel...X - 2 Buffer %s is leegX - 2 Dit is het eerste bestandX - 2 Er vindt geen logging plaats, kan wijzigingen niet ongedaan makenX - 2 OnderbrokenX - 2 Wijzigingen kunnen niet ongedaan gemaakt worden als deze sessie misluktX - 2 gewijzigdX - 2 set: %s optie moet een waarde hebbenX - 3 %s: verwijdering misluktX - 3 Bestand gewijzigd sinds laatste schrijfactie; schrijf het weg of gebruik ! om het te forcerenX - 4 Gebruik: %sX -========================= diff --git a/catalog/english b/catalog/english deleted file mode 100644 index f34451d9b6d5..000000000000 --- a/catalog/english +++ /dev/null @@ -1,317 +0,0 @@ -VI_MESSAGE_CATALOG -Line length overflowX -unable to delete line %luX -unable to append to line %luX -unable to insert at line %luX -unable to store line %luX -unable to get last lineX -Error: unable to retrieve line %luX -Log fileX -Logging not being performed, undo not possibleX -No changes to undoX -Logging not being performed, undo not possibleX -Logging not being performed, roll-forward not possibleX -No changes to re-doX -%s/%d: log put errorX -Vi's standard input and output must be a terminalX -Mark %s: not setX -Mark %s: the line was deletedX -Mark %s: cursor position no longer existsX -Error: X -new fileX -name changedX -modifiedX -unmodifiedX -UNLOCKEDX -readonlyX -line %lu of %lu [%ld%%]X -empty fileX -line %luX -The file %s is not a message catalogX -Unable to set default %s optionX -Usage: %sX -set: no %s option: 'set all' gives all option valuesX -set: [no]%s option doesn't take a valueX -set: %s option isn't a booleanX -set: %s option: %sX -set: %s option: %s: value overflowX -set: %s option: %s is an illegal numberX -set: %s option isn't a booleanX -Screen columns too small, less than %dX -Screen columns too large, greater than %dX -Screen lines too small, less than %dX -Screen lines too large, greater than %dX -The lisp option is not implementedX -messages not turned off: %sX -messages not turned on: %sX - -The paragraph option must be in two character groupsX -The section option must be in two character groupsX - - - -The default buffer is emptyX -Buffer %s is emptyX -Files with newlines in the name are unrecoverableX -Modifications not recoverable if the session failsX -Copying file for recovery...X -Preservation failed: %sX -Modifications not recoverable if the session failsX -File backup failed: %sX -Copying file for recovery...X -Information on user id %u not foundX -Unable to lock recovery fileX -Recovery file buffer overrunX -Recovery fileX -%s: malformed recovery fileX -%s: malformed recovery fileX -No files named %s, readable by you, to recoverX -There are older versions of this file for you to recoverX -There are other files for you to recoverX -not sending email: %sX -File empty; nothing to searchX -Reached end-of-file without finding the patternX -No previous search patternX -Pattern not foundX -Reached top-of-file without finding the patternX -Search wrappedX -Searching...X -No non-printable character foundX -Unknown command nameX - -%s: command not available in ex modeX -Count may not be zeroX -%s: bad line specificationX -Internal syntax table error (%s: %s)X -Usage: %sX -%s: temporary buffer not releasedX -Flag offset to before line 1X -Flag offset past end-of-fileX -@ with range running when the file/screen changedX -Global/v command running when the file/screen changedX -Ex command failed: pending commands discardedX -Ex command failed: mapped keys discardedX -The second address is smaller than the firstX -No mark name suppliedX -\\ not followed by / or ?X -Reference to a line number less than 0X -The %s command is unknownX -Address value overflowX -Address value underflowX -Illegal address combinationX -Illegal address: only %lu lines in the fileX -Illegal address: the file is emptyX -The %s command doesn't permit an address of 0X -No abbreviations to displayX -Abbreviations must end with a "word" characterX -Abbreviations may not contain tabs or spacesX -Abbreviations may not mix word/non-word characters, except at the endX -"%s" is not an abbreviationX -Vi command failed: mapped keys discardedX -No more files to editX -No previous files to editX -No previous files to rewindX -No file list to displayX -No previous command to replace "!"X -No filename to substitute for %%X -No filename to substitute for #X -Error: execl: %sX -I/O error: %sX -File modified since last complete write; write or use ! to overrideX -Unable to find home directory locationX -New current directory: %sX -No cut buffers to displayX -The %s command can't be used as part of a global or v commandX -%s/%s: not sourced: not owned by you or rootX -%s/%s: not sourced: not owned by youX -%s/%s: not sourced: writeable by a user other than the ownerX -%s: not sourced: not owned by you or rootX -%s: not sourced: not owned by youX -%s: not sourced: writeable by a user other than the ownerX -No following lines to joinX -No input map entriesX -No command map entriesX -The %s character may not be remappedX -"%s" isn't currently mappedX -Mark names must be a single characterX -%s exists, not written; use ! to overrideX -New exrc file: %sX -Destination line is inside move rangeX -The open command requires that the open option be setX -The open command is not yet implementedX -Preservation of this file not possibleX -File preservedX -%s: expanded into too many file namesX -Only regular files and named pipes may be readX -%s: read lock was unavailableX -Reading...X -%s: %lu lines, %lu charactersX -No background screens to displayX -The script command is only available in vi modeX -No command to executeX -shiftwidth option set to 0X -Count overflowX -Count underflowX -Regular expression specified; r flag meaninglessX -The #, l and p flags may not be combined with the c flag in vi modeX -No match foundX -No previous tag enteredX -Less than %s entries on the tags stack; use :display t[ags]X -No file %s on the tags stack to return to; use :display t[ags]X -Press Enter to continue: X -%s: tag not foundX -%s: corrupted tag in %sX -%s: the tag's line number is past the end of the fileX -The tags stack is emptyX -%s: search pattern not foundX -%d more files to editX -Buffer %s is emptyX -Confirm change? [n]X -InterruptedX -No previous buffer to executeX -No previous regular expressionX -The %s command requires that a file have already been read inX -Usage: %sX -The visual command requires that the open option be setX - -Empty fileX -No previous F, f, T or t searchX -%s not foundX -No previous file to editX -Cursor not in a numberX -Resulting number too largeX -Resulting number too smallX -No match character on this lineX -Matching character not foundX -No characters to replaceX -No other screen to switch toX -Characters after search string, line offset and/or z commandX -No previous search patternX -Search wrapped to original positionX -Abbreviation exceeded expansion limit: characters discardedX -Illegal character; quote to enterX -Already at the beginning of the insertX -No more characters to eraseX -Movement past the end-of-fileX -Movement past the end-of-lineX -No cursor movement madeX -Already at the beginning of the fileX -Movement past the beginning of the fileX -Already in the first columnX -Buffers should be specified before the commandX -Already at end-of-fileX -Already at end-of-lineX -%s isn't a vi commandX -Usage: %sX -No characters to deleteX -The Q command requires the ex terminal interfaceX -No command to repeatX -The file is emptyX -%s may not be used as a motion commandX -Already in command modeX -Cursor not in a wordX - -Windows option value is too large, max is %uX -AppendX -ChangeX -CommandX -InsertX -ReplaceX -Movement past the end-of-screenX -Movement past the beginning-of-screenX -Screen must be larger than %d lines to splitX -There are no background screensX -There's no background screen editing a file named %sX -You may not background your only displayed screenX -The screen can only shrink to %d rowsX -The screen cannot shrinkX -The screen cannot growX - -This screen may not be suspendedX -Interrupted: mapped keys discardedX -vi: temporary buffer not releasedX -This terminal has no %s keyX -Only one buffer may be specifiedX -Number larger than %luX -InterruptedX -Unable to create temporary fileX -Warning: %s is not a regular fileX -%s already locked, session is read-onlyX -%s: removeX -%s: closeX -%s: removeX -%s: removeX -Read-only file, not written; use ! to overrideX -Read-only file, not writtenX -%s exists, not written; use ! to overrideX -%s exists, not writtenX -Partial file, not written; use ! to overrideX -Partial file, not writtenX -%s: file modified more recently than this copy; use ! to overrideX -%s: file modified more recently than this copyX -%s: write lock was unavailableX -Writing...X -%s: WARNING: FILE TRUNCATEDX -Already at the first tag of this groupX -%s: new file: %lu lines, %lu charactersX -%s: %lu lines, %lu charactersX -%s expanded into too many file namesX -%s: not a regular fileX -%s: not owned by youX -%s: accessible by a user other than the ownerX -File modified since last complete write; write or use ! to overrideX -File modified since last complete write; write or use :edit! to overrideX -File modified since last complete write; write or use ! to overrideX -File is a temporary; exit will discard modificationsX -File readonly, modifications not auto-writtenX -Log restartedX -confirm? [ynq]X -Press any key to continue: X -Press any key to continue [: to enter more ex commands]: X -Press any key to continue [q to quit]: X -That form of %s requires the ex terminal interfaceX -Entering ex input mode.X -Command failed, no file read in yet.X - cont?X -Unexpected character eventX -Unexpected end-of-file eventX -No matches for queryX -Unexpected interrupt eventX -Unexpected quit eventX -Unexpected repaint eventX -Already at the last tag of this groupX -The %s command requires the ex terminal interfaceX -That form of %s is not supported when the secure edit option is setX -Unexpected string eventX -Unexpected timeout eventX -Unexpected write eventX - -Shell expansions not supported when the secure edit option is setX -The %s command is not supported when the secure edit option is setX -set: the %s option may not be turned offX -Display too small.X -addedX -changedX -deletedX -joinedX -movedX -shiftedX -yankedX -lineX -linesX -Vi was not loaded with a Tcl interpreterX -File modified since last write.X -Shell expansion failedX -No %s edit option specifiedX -Vi was not loaded with a Perl interpreterX -No ex command to executeX -Enter <CR> to execute a command, :q to exitX -Use "cscope help" for helpX -No cscope connections runningX -%s: unknown search type: use one of %sX -%d: no such cscope sessionX -set: the %s option may never be turned onX -set: the %s option may never be set to 0X -%s: appended: %lu lines, %lu charactersX -Unexpected resize eventX -%d files to editX diff --git a/catalog/english.base b/catalog/english.base deleted file mode 100644 index 6d8d7bf60bbf..000000000000 --- a/catalog/english.base +++ /dev/null @@ -1,309 +0,0 @@ -002 "Line length overflow" -003 "unable to delete line %lu" -004 "unable to append to line %lu" -005 "unable to insert at line %lu" -006 "unable to store line %lu" -007 "unable to get last line" -008 "Error: unable to retrieve line %lu" -009 "Log file" -010 "Logging not being performed, undo not possible" -011 "No changes to undo" -012 "Logging not being performed, undo not possible" -013 "Logging not being performed, roll-forward not possible" -014 "No changes to re-do" -015 "%s/%d: log put error" -016 "Vi's standard input and output must be a terminal" -017 "Mark %s: not set" -018 "Mark %s: the line was deleted" -019 "Mark %s: cursor position no longer exists" -020 "Error: " -021 "new file" -022 "name changed" -023 "modified" -024 "unmodified" -025 "UNLOCKED" -026 "readonly" -027 "line %lu of %lu [%ld%%]" -028 "empty file" -029 "line %lu" -030 "The file %s is not a message catalog" -031 "Unable to set default %s option" -032 "Usage: %s" -033 "set: no %s option: 'set all' gives all option values" -034 "set: [no]%s option doesn't take a value" -035 "set: %s option isn't a boolean" -036 "set: %s option: %s" -037 "set: %s option: %s: value overflow" -038 "set: %s option: %s is an illegal number" -039 "set: %s option isn't a boolean" -040 "Screen columns too small, less than %d" -041 "Screen columns too large, greater than %d" -042 "Screen lines too small, less than %d" -043 "Screen lines too large, greater than %d" -044 "The lisp option is not implemented" -045 "messages not turned off: %s" -046 "messages not turned on: %s" -048 "The paragraph option must be in two character groups" -049 "The section option must be in two character groups" -053 "The default buffer is empty" -054 "Buffer %s is empty" -055 "Files with newlines in the name are unrecoverable" -056 "Modifications not recoverable if the session fails" -057 "Copying file for recovery..." -058 "Preservation failed: %s" -059 "Modifications not recoverable if the session fails" -060 "File backup failed: %s" -061 "Copying file for recovery..." -062 "Information on user id %u not found" -063 "Unable to lock recovery file" -064 "Recovery file buffer overrun" -065 "Recovery file" -066 "%s: malformed recovery file" -067 "%s: malformed recovery file" -068 "No files named %s, readable by you, to recover" -069 "There are older versions of this file for you to recover" -070 "There are other files for you to recover" -071 "not sending email: %s" -072 "File empty; nothing to search" -073 "Reached end-of-file without finding the pattern" -074 "No previous search pattern" -075 "Pattern not found" -076 "Reached top-of-file without finding the pattern" -077 "Search wrapped" -078 "Searching..." -079 "No non-printable character found" -080 "Unknown command name" -082 "%s: command not available in ex mode" -083 "Count may not be zero" -084 "%s: bad line specification" -085 "Internal syntax table error (%s: %s)" -086 "Usage: %s" -087 "%s: temporary buffer not released" -088 "Flag offset to before line 1" -089 "Flag offset past end-of-file" -090 "@ with range running when the file/screen changed" -091 "Global/v command running when the file/screen changed" -092 "Ex command failed: pending commands discarded" -093 "Ex command failed: mapped keys discarded" -094 "The second address is smaller than the first" -095 "No mark name supplied" -096 "\\ not followed by / or ?" -097 "Reference to a line number less than 0" -098 "The %s command is unknown" -099 "Address value overflow" -100 "Address value underflow" -101 "Illegal address combination" -102 "Illegal address: only %lu lines in the file" -103 "Illegal address: the file is empty" -104 "The %s command doesn't permit an address of 0" -105 "No abbreviations to display" -106 "Abbreviations must end with a "word" character" -107 "Abbreviations may not contain tabs or spaces" -108 "Abbreviations may not mix word/non-word characters, except at the end" -109 ""%s" is not an abbreviation" -110 "Vi command failed: mapped keys discarded" -111 "No more files to edit" -112 "No previous files to edit" -113 "No previous files to rewind" -114 "No file list to display" -115 "No previous command to replace "!"" -116 "No filename to substitute for %%" -117 "No filename to substitute for #" -118 "Error: execl: %s" -119 "I/O error: %s" -120 "File modified since last complete write; write or use ! to override" -121 "Unable to find home directory location" -122 "New current directory: %s" -123 "No cut buffers to display" -124 "The %s command can't be used as part of a global or v command" -125 "%s/%s: not sourced: not owned by you or root" -126 "%s/%s: not sourced: not owned by you" -127 "%s/%s: not sourced: writeable by a user other than the owner" -128 "%s: not sourced: not owned by you or root" -129 "%s: not sourced: not owned by you" -130 "%s: not sourced: writeable by a user other than the owner" -131 "No following lines to join" -132 "No input map entries" -133 "No command map entries" -134 "The %s character may not be remapped" -135 ""%s" isn't currently mapped" -136 "Mark names must be a single character" -137 "%s exists, not written; use ! to override" -138 "New exrc file: %s" -139 "Destination line is inside move range" -140 "The open command requires that the open option be set" -141 "The open command is not yet implemented" -142 "Preservation of this file not possible" -143 "File preserved" -144 "%s: expanded into too many file names" -145 "Only regular files and named pipes may be read" -146 "%s: read lock was unavailable" -147 "Reading..." -148 "%s: %lu lines, %lu characters" -149 "No background screens to display" -150 "The script command is only available in vi mode" -151 "No command to execute" -152 "shiftwidth option set to 0" -153 "Count overflow" -154 "Count underflow" -155 "Regular expression specified; r flag meaningless" -156 "The #, l and p flags may not be combined with the c flag in vi mode" -157 "No match found" -158 "No previous tag entered" -159 "Less than %s entries on the tags stack; use :display t[ags]" -160 "No file %s on the tags stack to return to; use :display t[ags]" -161 "Press Enter to continue: " -162 "%s: tag not found" -163 "%s: corrupted tag in %s" -164 "%s: the tag's line number is past the end of the file" -165 "The tags stack is empty" -166 "%s: search pattern not found" -167 "%d more files to edit" -168 "Buffer %s is empty" -169 "Confirm change? [n]" -170 "Interrupted" -171 "No previous buffer to execute" -172 "No previous regular expression" -173 "The %s command requires that a file have already been read in" -174 "Usage: %s" -175 "The visual command requires that the open option be set" -177 "Empty file" -178 "No previous F, f, T or t search" -179 "%s not found" -180 "No previous file to edit" -181 "Cursor not in a number" -182 "Resulting number too large" -183 "Resulting number too small" -184 "No match character on this line" -185 "Matching character not found" -186 "No characters to replace" -187 "No other screen to switch to" -188 "Characters after search string, line offset and/or z command" -189 "No previous search pattern" -190 "Search wrapped to original position" -191 "Abbreviation exceeded expansion limit: characters discarded" -192 "Illegal character; quote to enter" -193 "Already at the beginning of the insert" -194 "No more characters to erase" -195 "Movement past the end-of-file" -196 "Movement past the end-of-line" -197 "No cursor movement made" -198 "Already at the beginning of the file" -199 "Movement past the beginning of the file" -200 "Already in the first column" -201 "Buffers should be specified before the command" -202 "Already at end-of-file" -203 "Already at end-of-line" -204 "%s isn't a vi command" -205 "Usage: %s" -206 "No characters to delete" -207 "The Q command requires the ex terminal interface" -208 "No command to repeat" -209 "The file is empty" -209 "The file is empty" -210 "%s may not be used as a motion command" -211 "Already in command mode" -212 "Cursor not in a word" -214 "Windows option value is too large, max is %u" -215 "Append" -216 "Change" -217 "Command" -218 "Insert" -219 "Replace" -220 "Movement past the end-of-screen" -221 "Movement past the beginning-of-screen" -222 "Screen must be larger than %d lines to split" -223 "There are no background screens" -224 "There's no background screen editing a file named %s" -225 "You may not background your only displayed screen" -226 "The screen can only shrink to %d rows" -227 "The screen cannot shrink" -228 "The screen cannot grow" -230 "This screen may not be suspended" -231 "Interrupted: mapped keys discarded" -232 "vi: temporary buffer not released" -233 "This terminal has no %s key" -234 "Only one buffer may be specified" -235 "Number larger than %lu" -236 "Interrupted" -237 "Unable to create temporary file" -238 "Warning: %s is not a regular file" -239 "%s already locked, session is read-only" -240 "%s: remove" -241 "%s: close" -242 "%s: remove" -243 "%s: remove" -244 "Read-only file, not written; use ! to override" -245 "Read-only file, not written" -246 "%s exists, not written; use ! to override" -247 "%s exists, not written" -248 "Partial file, not written; use ! to override" -249 "Partial file, not written" -250 "%s: file modified more recently than this copy; use ! to override" -251 "%s: file modified more recently than this copy" -252 "%s: write lock was unavailable" -253 "Writing..." -254 "%s: WARNING: FILE TRUNCATED" -255 "Already at the first tag of this group" -256 "%s: new file: %lu lines, %lu characters" -257 "%s: %lu lines, %lu characters" -258 "%s expanded into too many file names" -259 "%s: not a regular file" -260 "%s: not owned by you" -261 "%s: accessible by a user other than the owner" -262 "File modified since last complete write; write or use ! to override" -263 "File modified since last complete write; write or use :edit! to override" -264 "File modified since last complete write; write or use ! to override" -265 "File is a temporary; exit will discard modifications" -266 "File readonly, modifications not auto-written" -267 "Log restarted" -268 "confirm? [ynq]" -269 "Press any key to continue: " -270 "Press any key to continue [: to enter more ex commands]: " -271 "Press any key to continue [q to quit]: " -272 "That form of %s requires the ex terminal interface" -273 "Entering ex input mode." -274 "Command failed, no file read in yet." -275 " cont?" -276 "Unexpected character event" -277 "Unexpected end-of-file event" -278 "No matches for query" -279 "Unexpected interrupt event" -280 "Unexpected quit event" -281 "Unexpected repaint event" -282 "Already at the last tag of this group" -283 "The %s command requires the ex terminal interface" -284 "That form of %s is not supported when the secure edit option is set" -285 "Unexpected string event" -286 "Unexpected timeout event" -287 "Unexpected write event" -289 "Shell expansions not supported when the secure edit option is set" -290 "The %s command is not supported when the secure edit option is set" -291 "set: the %s option may not be turned off" -292 "Display too small." -293 "added" -294 "changed" -295 "deleted" -296 "joined" -297 "moved" -298 "shifted" -299 "yanked" -300 "line" -301 "lines" -302 "Vi was not loaded with a Tcl interpreter" -303 "File modified since last write." -304 "Shell expansion failed" -304 "Shell expansion failed" -305 "No %s edit option specified" -306 "Vi was not loaded with a Perl interpreter" -307 "No ex command to execute" -308 "Enter <CR> to execute a command, :q to exit" -309 "Use "cscope help" for help" -310 "No cscope connections running" -311 "%s: unknown search type: use one of %s" -312 "%d: no such cscope session" -313 "set: the %s option may never be turned on" -314 "set: the %s option may never be set to 0" -315 "%s: appended: %lu lines, %lu characters" -316 "Unexpected resize event" -317 "%d files to edit" diff --git a/catalog/english.check b/catalog/english.check deleted file mode 100644 index 51093785c87c..000000000000 --- a/catalog/english.check +++ /dev/null @@ -1,36 +0,0 @@ -Unused message id's (this is okay): -001 -047 -050 -051 -052 -081 -176 -229 -288 -========================= -MISSING ERROR MESSAGES (Please add!): -========================= -Extra error messages (just delete them): -========================= -MESSAGES WITH THE SAME MESSAGE ID's (FIX!): -========================= -Duplicate messages, both id and message (this is okay): - 2 209 "The file is empty" - 2 304 "Shell expansion failed" -========================= -Duplicate messages, just message (this is okay): - 2 %s exists, not written; use ! to overrideX - 2 %s: %lu lines, %lu charactersX - 2 %s: malformed recovery fileX - 2 Buffer %s is emptyX - 2 Copying file for recovery...X - 2 InterruptedX - 2 Logging not being performed, undo not possibleX - 2 Modifications not recoverable if the session failsX - 2 No previous search patternX - 2 set: %s option isn't a booleanX - 3 %s: removeX - 3 File modified since last complete write; write or use ! to overrideX - 4 Usage: %sX -========================= diff --git a/catalog/french b/catalog/french deleted file mode 100644 index a75c486ef9ba..000000000000 --- a/catalog/french +++ /dev/null @@ -1,317 +0,0 @@ -VI_MESSAGE_CATALOG -D‚passement de longueur de ligneX -impossible de supprimer la ligne %luX -impossible d'ajouter … la ligne %luX -impossible d'ins‚rer devant la ligne %luX -impossible de stocker la ligne %luX -impossible d'obtenir la derniŠre ligneX -Erreur : impossible de r‚cup‚rer la ligne %luX -Fichier journalX -Aucune connexion n'‚tant effectu‚e, impossible d'annulerX -Aucune action … annulerX -Aucune connexion n'‚tant effectu‚e, impossible d'annulerX -Aucune connexion n'‚tant effectu‚e, reprise actualis‚e impossibleX -Aucune action … refaireX -%s/%d : Erreur d'‚criture de journalX -L'entr‚e et la sortie Vi standards doivent ˆtre un terminalX -Marque %s : non d‚finieX -Marque %s : la ligne a ‚t‚ supprim‚eX -Marque %s : la position du curseur n'existe plusX -Erreur : X -nouveau fichierX -le nom a chang‚X -modifi‚X -non modifi‚X -DEVERROUILLEX -lecture seuleX -ligne %lu de %lu [%ld%%]X -fichier videX -ligne %luX -Ce fichier %s n'est pas un catalogue de messagesX -Impossible de configurer option %s par d‚fautX -Utilisation : %sX -D‚finition : pas d'option %s : 'tout d‚finir' donne toutes les valeurs optionnellesX -D‚finition : option [no]%s ne prend pas de valeurX -D‚finition : l'option %s n'est pas bool‚enneX -D‚finition : option %s : %sX -D‚finition : option %s : %s : D‚passement de valeurX -D‚finition : option %s : %s n'est pas un nombre valideX -D‚finition : l'option %s n'est pas bool‚enneX -Les colonnes de l'‚cran sont trop petites, inf‚rieures … %dX -Les colonnes de l'‚cran sont trop grandes, sup‚rieures … %dX -Les lignes de l'‚cran sont trop courtes, inf‚rieures … %dX -Les lignes de l'‚cran sont trop longues, sup‚rieures … %dX -L'option lisp n'est pas impl‚ment‚eX -Les messages ne sont pas d‚sactiv‚s : %sX -Les messages ne sont pas activ‚s : %sX - -L'option de paragraphe doit ˆtre en groupe de deux caractŠresX -L'option de section doit ˆtre en groupe de deux caractŠresX - - - -Le tampon par d‚faut est videX -Le tampon %s est videX -Les fichiers dont le nom contient des caractŠres de saut de ligne sont irr‚cup‚rablesX -Impossible de r‚cup‚rer les modifications si la session ‚choueX -Copie en cours du fichier pour r‚cup‚ration...X -La pr‚servation a ‚chou‚ : %sX -Impossible de r‚cup‚rer les modifications si la session ‚choueX -La sauvegarde du fichier a ‚chou‚ : %sX -Copie en cours du fichier pour r‚cup‚ration...X -Les renseignements sur l'identit‚ %u de l'utilisateur sont introuvablesX -Impossible de verrouiller le fichier de r‚cup‚rationX -D‚bordement de tampon du fichier de r‚cup‚rationX -Fichier de r‚cup‚rationX -%s : Fichier de r‚cup‚ration malform‚X -%s : Fichier de r‚cup‚ration malform‚X -Aucun fichier nomm‚ %s … r‚cup‚rer, que vous puissiez lireX -Il existe des versions r‚cup‚rables ant‚rieures … ce fichierX -Vous avez d'autres fichiers … r‚cup‚rerX -pas d'envoi d'email : %sX -Fichier vide, rien … rechercherX -Fin de fichier atteinte sans trouver le motifX -Pas de motif de recherche pr‚c‚dentX -Motif introuvableX -D‚but du fichier atteint sans trouver le motifX -La recherche est revenue … son point de d‚partX -Recherche en cours...X -CaractŠre non-imprimable introuvableX -Nom de commande inconnuX - -%s : Commande non disponible en ex modeX -Le compte ne peut ˆtre z‚roX -%s : mauvaise sp‚cification de ligneX -Erreur de tableau de syntaxe interne (%s: %s)X -Utilisation : %sX -%s : tampon temporaire non lib‚r‚X -D‚calage de drapeau hors de la ligne 1X -D‚calage de drapeau hors de la fin du fichierX -@ avec plage, en cours d'ex‚cution quand le fichier/l'‚cran a chang‚X -Commande Global/v en cours d'ex‚cution quand le fichier/l'‚cran a chang‚X -La commande ex a ‚chou‚ : commandes en attente abandonn‚esX -La commande ex a ‚chou‚ : les touches affect‚es sont abandonn‚esX -La deuxiŠme adresse est plus petite que la premiŠreX -Aucun nom de marque fourniX -\\ pas suivi par / ou ?X -R‚f‚rence … un num‚ro de ligne inf‚rieure … 0X -La commande %s est inconnueX -D‚passement de la valeur adresseX -D‚passement n‚gatif de la valeur adresseX -Combinaison d'adresse non valideX -Adresse non valide : il n'y a que des lignes %lu dans le fichierX -Adresse non valide : le fichier est videX -La commande %s ne permet pas une adresse de 0X -Pas d'abr‚viations … afficherX -Les abr‚viations doivent finir par un caractŠre"motX -Les abr‚viations ne peuvent pas contenir de tabulations ni d'espacesX -Les abr‚viations ne peuvent pas contenir un m‚lange de caractŠres mot/non-mot, sauf … la finX -"%s" n'est pas une abr‚viationX -La commande Vi a ‚chou‚ : Les touches affect‚es ont ‚t‚ abandonn‚esX -Plus de fichiers … ‚diterX -Pas de fichiers pr‚c‚dents … ‚diterX -Pas de fichiers pr‚c‚dents … rembobinerX -Pas de liste de fichiers … afficherX -Pas de commande pr‚c‚dente … remplacer"!"X -Pas de nom de fichier … substituer … %%X -Pas de nom de fichier … substituer … #X -Erreur : execl : %sX -Erreur E/S : %sX -Fichier modifi‚ depuis la derniŠre ‚criture complŠte ; ‚crire ou utiliser ! pour outrepasserX -Impossible de trouver l'emplacement du r‚pertoire d'origineX -Nouveau r‚pertoire en cours : %sX -Pas de tampon de coupure … afficherX -La commande %s ne peut pas ˆtre utilis‚e … l'int‚rieur d'une commande globale ou commande vX -%s/%s : ‚chec de source : ni vous ni le super-utilisateur n'ˆtes les propri‚taires X -%s/%s : ‚chec de source : vous n'ˆtes pas le propri‚taireX -%s/%s : ‚chec de source : peut ˆtre ‚crit par un utilisateur autre que le propri‚taireX -%s : ‚chec de source : ni vous ni le super-utilisateur n'ˆtes les propri‚tairesX -%s : ‚chec de source : vous n'ˆtes pas le propri‚taireX -%s : ‚chec de source : peut ˆtre ‚crit par un utilisateur autre que le propri‚taireX -Pas de lignes suivantes … joindreX -Pas d'entr‚es de mappage d'entr‚eX -Pas d'entr‚es de mappage de commandesX -Le caractŠre %s ne peut pas ˆtre remapp‚X -"%s" n'est pas actuellement mapp‚X -Les noms de marque ne doivent avoir qu'un caractŠreX -%s existe, non enregistr‚; utiliser ! pour outrepasserX -Nouveau fichier exrc : %sX -La ligne de destination est … l'int‚rieur de la plage … d‚placerX -La commande ouverte n‚cessite que l'option ouverte soit d‚finieX -La commande ouverte n'est pas encore impl‚ment‚eX -La pr‚servation de ce fichier est impossibleX -Fichier pr‚serv‚X -%s: ‚tendu dans trop de noms de fichiersX -Vous ne pouvez lire que les fichiers standards et les canaux de transmission nomm‚sX -%s: Interdiction de lecture non disponibleX -Lecture en cours...X -%s: %lu lignes, %lu caractŠresX -Pas d'‚crans d'arriŠre-plan … afficherX -La commande script n'est disponible qu'en mode viX -Pas de commande … ex‚cuterX -Option de largeur de d‚calage d‚finie sur 0X -Compter d‚passementX -Compter d‚passement n‚gatifX -Expression standard sp‚cifi‚e; drapeau r superfluX -Vous ne pouvez pas en mode vi, combiner les drapeaux #, l et p avec le drapeau cX -Aucune correspondance trouv‚eX -Aucune marque pr‚c‚dente entr‚eX -Moins de %s entr‚es dans la pile de marques ; utilisez t[ags]X -Pas de fichier %s vers lequel retourner dans la pile de marques ; utiliser : affichage t[ags]X -Appuyez sur Entr‚e pour continuer :X -%s : marque introuvableX -%s : marque corrompue en %sX -%s : le num‚ro de ligne de la marque d‚passe la fin du fichierX -La pile de marques est videX -%s : motif de recherche introuvableX -%d fichiers suppl‚mentaires … ‚diterX -Le tampon %s est vide -Confirmer les changements ? [n]X -InterrompuX -Pas de tampon pr‚c‚dent … ex‚cuterX -Pas d'expression standard pr‚c‚denteX -La commande %s n‚cessite qu'un fichier ait d‚j… ‚t‚ lu en m‚moireX -Utilisation : %sX -La commande visuelle n‚cessite que l'option ouverte soit d‚finieX - -Fichier videX -Pas de recherche pr‚c‚dente F, f, T ou tX -%s introuvableX -Pas de fichier pr‚c‚dent … ‚diterX -Le curseur n'est pas dans un nombreX -Le nombre obtenu est trop grandX -Le nombre obtenu est trop petitX -Pas de correspondance de caractŠre sur cette ligneX -CaractŠre correspondant introuvableX -Pas de caractŠres … remplacerX -Pas d'autre ‚cran vers lequel basculerX -CaractŠres aprŠs la chaŒne de recherche, d‚calage de ligne et/ou commande zX -Pas de motif de recherche pr‚c‚dentX -La recherche est revenue … son point de d‚partX -L'abr‚viation a d‚pass‚ la limite de l'expansion : caractŠres abandonn‚sX -CaractŠre non valide ; guillemet pour saisirX -D‚j… au d‚but de l'insertionX -Plus de caractŠres … effacerX -D‚placement hors de fin de fichierX -D‚placement hors de fin de ligneX -Aucun mouvement de curseur n'a ‚t‚ effectu‚X -D‚j… au d‚but du fichierX -D‚placement hors du d‚but du fichierX -D‚j… dans la premiŠre colonneX -Les tampons doivent ˆtre sp‚cifi‚s avant la commandeX -D‚j… … la fin du fichierX -D‚j… … la fin de la ligneX -%s n'est pas une commande viX -Utilisation : %sX -Pas de caractŠres … supprimerX -La commande Q n‚cessite une interface terminal exX -Pas de commande … r‚p‚terX -Le fichier est videX -Vous ne pouvez pas utiliser %s comme commande de d‚placementX -D‚j… en mode commandeX -Le curseur n'est pas dans un motX - -Valeur optionnelle de fenˆtre trop grande, maximum est %uX -AjouterX -ChangerX -CommandeX -Ins‚rerX -RemplacerX -D‚placement hors de la fin d'‚cranX -D‚placement hors du d‚but d'‚cranX -L'‚cran doit ˆtre sup‚rieur … %d lignes pour se fractionnerX -Il n'y a pas d'‚cran d'arriŠre-planX -Il n'y a pas d'‚cran d'arriŠre-plan qui ‚dite un fichier nomm‚ %sX -Vous ne pouvez pas mettre … l'arriŠre-plan votre seul ‚cran affich‚X -L'‚cran ne peut ˆtre r‚duit qu'… %d rangsX -L'‚cran n'est pas auto-r‚ductibleX -L'‚cran n'est pas auto-extensibleX - -Vous ne pouvez pas mettre cet ‚cran en attenteX -Interrompu : les touches affect‚es ont ‚t‚ abandonn‚esX -vi : le tampon temporaire n' a pas ‚t‚ lib‚r‚X -Ce terminal n'a pas de touche %sX -Vous ne pouvez sp‚cifier qu'un seul tamponX -Nombre sup‚rieur … %luX -InterrompuX -Impossible de cr‚er un fichier temporaireX -Avertissement : %s n'est pas un fichier standardX -%s d‚j… verrouill‚, session en lecture seuleX -%s: supprimerX -%s: fermerX -%s: supprimerX -%s: supprimerX -Fichier en lecture seule, pas ‚crit, utiliser ! pour outrepasserX -Fichier en lecture seule, pas ‚critX -%s existe, pas ‚crit; utiliser ! pour outrepasserX -%s existe, pas ‚critX -Fichier partiel, pas ‚crit; utiliser ! pour outrepasserX -Fichier partiel, pas ‚critX -%s: fichier modifi‚ plus r‚cemment que cet exemplaire; utiliser ! pour outrepasserX -%s: fichier modifi‚ plus r‚cemment que cet exemplaireX -%s: interdiction d'‚criture non disponibleX -Ecriture en cours...X -%s: AVERTISSEMENT : FICHIER TRONQUEX -PremiŠre marque de ce groupe d‚j… atteinteX -%s: nouveau fichier : %lu lignes, %lu caractŠresX -%s: %lu lignes, %lu caractŠresX -%s ‚tendue … trop de noms de fichiersX -%s: pas un fichier standardX -%s: ne vous appartient pasX -%s: accessible par un utilisateur autre que son propri‚taireX -Fichier modif‚ depuis la derniŠre ‚criture complŠte ; ‚crire ou utiliser ! pour outrepasser X -Fichier modif‚ depuis la derniŠre ‚criture complŠte ; ‚crire ou utiliser :edit! pour outrepasserX -Fichier modif‚ depuis la derniŠre ‚criture complŠte ; ‚crire ou utiliser ! pour outrepasserX -Fichier temporaire ; quitter annulera les modificationsX -Fichier en lecture seule ; les modifications ne sont pas ‚crites automatiquementX -Journal red‚marr‚X -confirmer ? [ynq]X -Appuyez sur n'importe quelle touche pour continuer : X -Appuyez sur n'importe quelle touche pour continuer [: pour entrer plus de commandes ex] : X -Appuyez sur n'importe quelle touche pour continuer [q pour Quitter]: X -Cette forme de %s n‚cessite l'interface de terminal exX -Entr‚e de mode entr‚e ex.X -La commande a ‚chou‚, aucun fichier n'a encore ‚t‚ lu.X -cont?X -Ev‚nement impr‚vu de caractŠreX -Ev‚nement impr‚vu de fin-de-fichierX -Pas de correspondances pour cette requˆteX -Ev‚nement impr‚vu d'interruptionX -Ev‚nement quitter impr‚vuX -Ev‚nement impr‚vu de rafraŒchissementX -La derniŠre marque de ce groupe a d‚j… ‚t‚ atteinteX -La commande %s n‚cessite l'interface de terminal exX -Cette forme de %s n'est pas reconnue quand l'option d'‚dition prot‚g‚e est activ‚eX -Ev‚nement impr‚vu de chaŒneX -Ev‚nement impr‚vu de d‚lai impartiX -Ev‚nement d'‚criture impr‚vuX - -Les expansions du shell ne sont pas reconnues quand l'option d'‚dition prot‚g‚e est activ‚eX -La commande %s n'est pas reconnue quand l'option d'‚dition prot‚g‚e est activ‚eX -D‚finition : l'option %s ne peut pas ˆtre d‚sactiv‚eX -Affichage trop petit.X -ajout‚X -chang‚X -supprim‚X -jointX -d‚plac‚X -d‚cal‚X -coup‚X -ligneX -lignesX -Vi n'a pas ‚t‚ charg‚ avec un interpr‚tateur TclX -Ficher modifi‚ depuis le dernier enregistrement.X -L'expansion du shell a ‚chou‚X -Pas d'option d'‚dition %s sp‚cifi‚eX -Vi n'a pas ‚t‚ charg‚ avec un interpr‚tateur PerlX -Pas de commande ex … ex‚cuterX -Entrez <CR> pour ex‚cuter une commande, :q pour quitterX -Utiliser "cscope help" pour obtenir de l'aideX -Aucune connexion cscope n'est lanc‚eX -%s : type de recherche inconnu : utiliser un des %sX -%d : Il n'existe pas de telle session cscopeX -D‚finition : l'option %s ne peut jamais ˆtre activ‚eX -D‚finition : l'option %s ne peut jamais ˆtre d‚finie sur 0X -%s: joints : %lu lignes, %lu caractŠresX -‚v‚nement impr‚vu de redimensionnementX -%d fichiers … ‚diterX diff --git a/catalog/french.base b/catalog/french.base index db2d45f9b220..234b8c6ba2c7 100644 --- a/catalog/french.base +++ b/catalog/french.base @@ -1,309 +1,306 @@ -002 "D‚passement de longueur de ligne" +002 "Dépassement de longueur de ligne" 003 "impossible de supprimer la ligne %lu" -004 "impossible d'ajouter … la ligne %lu" -005 "impossible d'ins‚rer devant la ligne %lu" +004 "impossible d'ajouter à la ligne %lu" +005 "impossible d'insérer devant la ligne %lu" 006 "impossible de stocker la ligne %lu" -007 "impossible d'obtenir la derniŠre ligne" -008 "Erreur : impossible de r‚cup‚rer la ligne %lu" +007 "impossible d'obtenir la dernière ligne" +008 "Erreur : impossible de récupérer la ligne %lu" 009 "Fichier journal" -010 "Aucune connexion n'‚tant effectu‚e, impossible d'annuler" -011 "Aucune action … annuler" -012 "Aucune connexion n'‚tant effectu‚e, impossible d'annuler" -013 "Aucune connexion n'‚tant effectu‚e, reprise actualis‚e impossible" -014 "Aucune action … refaire" -015 "%s/%d : Erreur d'‚criture de journal" -016 "L'entr‚e et la sortie Vi standards doivent ˆtre un terminal" -017 "Marque %s : non d‚finie" -018 "Marque %s : la ligne a ‚t‚ supprim‚e" +010 "Aucune journalisation n'étant effectuée, impossible d'annuler" +011 "Aucune action à annuler" +012 "Aucune journalisation n'étant effectuée, impossible d'annuler" +013 "Aucune journalisation n'étant effectuée, reprise actualisée impossible" +014 "Aucune action à refaire" +015 "%s/%d : Erreur d'écriture de journal" +016 "L'entrée et la sortie Vi standards doivent être un terminal" +017 "Marque %s : non définie" +018 "Marque %s : la ligne a été supprimée" 019 "Marque %s : la position du curseur n'existe plus" 020 "Erreur : " 021 "nouveau fichier" -022 "le nom a chang‚" -023 "modifi‚" -024 "non modifi‚" -025 "DEVERROUILLE" +022 "le nom a changé" +023 "modifié" +024 "non modifié" +025 "DÉVERROUILLÉ" 026 "lecture seule" 027 "ligne %lu de %lu [%ld%%]" 028 "fichier vide" 029 "ligne %lu" 030 "Ce fichier %s n'est pas un catalogue de messages" -031 "Impossible de configurer option %s par d‚faut" +031 "Impossible de configurer option %s par défaut" 032 "Utilisation : %s" -033 "D‚finition : pas d'option %s : 'tout d‚finir' donne toutes les valeurs optionnelles" -034 "D‚finition : option [no]%s ne prend pas de valeur" -035 "D‚finition : l'option %s n'est pas bool‚enne" -036 "D‚finition : option %s : %s" -037 "D‚finition : option %s : %s : D‚passement de valeur" -038 "D‚finition : option %s : %s n'est pas un nombre valide" -039 "D‚finition : l'option %s n'est pas bool‚enne" -040 "Les colonnes de l'‚cran sont trop petites, inf‚rieures … %d" -041 "Les colonnes de l'‚cran sont trop grandes, sup‚rieures … %d" -042 "Les lignes de l'‚cran sont trop courtes, inf‚rieures … %d" -043 "Les lignes de l'‚cran sont trop longues, sup‚rieures … %d" -044 "L'option lisp n'est pas impl‚ment‚e" -045 "Les messages ne sont pas d‚sactiv‚s : %s" -046 "Les messages ne sont pas activ‚s : %s" -048 "L'option de paragraphe doit ˆtre en groupe de deux caractŠres" -049 "L'option de section doit ˆtre en groupe de deux caractŠres" -053 "Le tampon par d‚faut est vide" +033 "Définition : pas d'option %s : 'set all' donne toutes les valeurs optionnelles" +034 "Définition : option [no]%s ne prend pas de valeur" +035 "Définition : l'option %s n'est pas booléenne" +036 "Définition : option %s : %s" +037 "Définition : option %s : %s : Dépassement de valeur" +038 "Définition : option %s : %s n'est pas un nombre valide" +039 "Définition : l'option %s n'est pas booléenne" +040 "Les colonnes de l'écran sont trop petites, inférieures à %d" +041 "Les colonnes de l'écran sont trop grandes, supérieures à %d" +042 "Les lignes de l'écran sont trop courtes, inférieures à %d" +043 "Les lignes de l'écran sont trop longues, supérieures à %d" +044 "L'option lisp n'est pas implémentée" +045 "Les messages ne sont pas désactivés : %s" +046 "Les messages ne sont pas activés : %s" +047 "L'option de %s doit être en groupe de deux caractères" +053 "Le tampon par défaut est vide" 054 "Le tampon %s est vide" -055 "Les fichiers dont le nom contient des caractŠres de saut de ligne sont irr‚cup‚rables" -056 "Impossible de r‚cup‚rer les modifications si la session ‚choue" -057 "Copie en cours du fichier pour r‚cup‚ration..." -058 "La pr‚servation a ‚chou‚ : %s" -059 "Impossible de r‚cup‚rer les modifications si la session ‚choue" -060 "La sauvegarde du fichier a ‚chou‚ : %s" -061 "Copie en cours du fichier pour r‚cup‚ration..." -062 "Les renseignements sur l'identit‚ %u de l'utilisateur sont introuvables" -063 "Impossible de verrouiller le fichier de r‚cup‚ration" -064 "D‚bordement de tampon du fichier de r‚cup‚ration" -065 "Fichier de r‚cup‚ration" -066 "%s : Fichier de r‚cup‚ration malform‚" -067 "%s : Fichier de r‚cup‚ration malform‚" -068 "Aucun fichier nomm‚ %s … r‚cup‚rer, que vous puissiez lire" -069 "Il existe des versions r‚cup‚rables ant‚rieures … ce fichier" -070 "Vous avez d'autres fichiers … r‚cup‚rer" +055 "Les fichiers dont le nom contient des caractères de saut de ligne sont irrécupérables" +056 "Impossible de récupérer les modifications si la session échoue" +057 "Copie en cours du fichier pour récupération..." +058 "La préservation a échoué : %s" +059 "Impossible de récupérer les modifications si la session échoue" +060 "La sauvegarde du fichier a échoué : %s" +061 "Copie en cours du fichier pour récupération..." +062 "Les renseignements sur l'identité %u de l'utilisateur sont introuvables" +063 "Impossible de verrouiller le fichier de récupération" +064 "Débordement de tampon du fichier de récupération" +065 "Fichier de récupération" +066 "%s : Fichier de récupération malformé" +067 "%s : Fichier de récupération malformé" +068 "Aucun fichier nommé %s à récupérer, que vous puissiez lire" +069 "Il existe des versions récupérables antérieures à ce fichier" +070 "Vous avez d'autres fichiers à récupérer" 071 "pas d'envoi d'email : %s" -072 "Fichier vide, rien … rechercher" +072 "Fichier vide, rien à rechercher" 073 "Fin de fichier atteinte sans trouver le motif" -074 "Pas de motif de recherche pr‚c‚dent" +074 "Pas de motif de recherche précédent" 075 "Motif introuvable" -076 "D‚but du fichier atteint sans trouver le motif" -077 "La recherche est revenue … son point de d‚part" +076 "Début du fichier atteint sans trouver le motif" +077 "La recherche est revenue à son point de départ" 078 "Recherche en cours..." -079 "CaractŠre non-imprimable introuvable" +079 "Caractère non-imprimable introuvable" 080 "Nom de commande inconnu" 082 "%s : Commande non disponible en ex mode" -083 "Le compte ne peut ˆtre z‚ro" -084 "%s : mauvaise sp‚cification de ligne" +083 "Le compteur ne peut être zéro" +084 "%s : mauvaise spécification de ligne" 085 "Erreur de tableau de syntaxe interne (%s: %s)" 086 "Utilisation : %s" -087 "%s : tampon temporaire non lib‚r‚" -088 "D‚calage de drapeau hors de la ligne 1" -089 "D‚calage de drapeau hors de la fin du fichier" -090 "@ avec plage, en cours d'ex‚cution quand le fichier/l'‚cran a chang‚" -091 "Commande Global/v en cours d'ex‚cution quand le fichier/l'‚cran a chang‚" -092 "La commande ex a ‚chou‚ : commandes en attente abandonn‚es" -093 "La commande ex a ‚chou‚ : les touches affect‚es sont abandonn‚es" -094 "La deuxiŠme adresse est plus petite que la premiŠre" +087 "%s : tampon temporaire non libéré" +088 "Décalage de drapeau hors de la ligne 1" +089 "Décalage de drapeau hors de la fin du fichier" +090 "@ avec plage, en cours d'exécution quand le fichier/l'écran a changé" +091 "Commande Global/v en cours d'exécution quand le fichier/l'écran a changé" +092 "La commande ex a échoué : commandes en attente abandonnées" +093 "La commande ex a échoué : les touches affectées sont abandonnées" +094 "La deuxième adresse est plus petite que la première" 095 "Aucun nom de marque fourni" -096 "\\ pas suivi par / ou ?" -097 "R‚f‚rence … un num‚ro de ligne inf‚rieure … 0" +096 "\\ non suivi par / ou ?" +097 "Référence à un numéro de ligne inférieure à 0" 098 "La commande %s est inconnue" -099 "D‚passement de la valeur adresse" -100 "D‚passement n‚gatif de la valeur adresse" +099 "Dépassement de la valeur adresse" +100 "Dépassement négatif de la valeur adresse" 101 "Combinaison d'adresse non valide" -102 "Adresse non valide : il n'y a que des lignes %lu dans le fichier" +102 "Adresse non valide : il n'y a que %lu lignes dans ce fichier" 103 "Adresse non valide : le fichier est vide" 104 "La commande %s ne permet pas une adresse de 0" -105 "Pas d'abr‚viations … afficher" -106 "Les abr‚viations doivent finir par un caractŠre"mot" -107 "Les abr‚viations ne peuvent pas contenir de tabulations ni d'espaces" -108 "Les abr‚viations ne peuvent pas contenir un m‚lange de caractŠres mot/non-mot, sauf … la fin" -109 ""%s" n'est pas une abr‚viation" -110 "La commande Vi a ‚chou‚ : Les touches affect‚es ont ‚t‚ abandonn‚es" -111 "Plus de fichiers … ‚diter" -112 "Pas de fichiers pr‚c‚dents … ‚diter" -113 "Pas de fichiers pr‚c‚dents … rembobiner" -114 "Pas de liste de fichiers … afficher" -115 "Pas de commande pr‚c‚dente … remplacer"!"" -116 "Pas de nom de fichier … substituer … %%" -117 "Pas de nom de fichier … substituer … #" +105 "Pas d'abréviations à afficher" +106 "Les abréviations doivent finir par un caractère \"mot\"" +107 "Les abréviations ne peuvent pas contenir de tabulations ni d'espaces" +108 "Les abréviations ne peuvent pas contenir un mélange de caractères mot/non-mot, sauf à la fin" +109 "\"%s\" n'est pas une abréviation" +110 "La commande Vi a échoué : Les touches affectées ont été abandonnées" +111 "Plus de fichiers à éditer" +112 "Pas de fichiers précédents à éditer" +113 "Pas de fichiers précédents à rembobiner" +114 "Pas de liste de fichiers à afficher" +115 "Pas de commande précédente à remplacer \"!\"" +116 "Pas de nom de fichier à substituer à %%" +117 "Pas de nom de fichier à substituer à #" 118 "Erreur : execl : %s" 119 "Erreur E/S : %s" -120 "Fichier modifi‚ depuis la derniŠre ‚criture complŠte ; ‚crire ou utiliser ! pour outrepasser" -121 "Impossible de trouver l'emplacement du r‚pertoire d'origine" -122 "Nouveau r‚pertoire en cours : %s" -123 "Pas de tampon de coupure … afficher" -124 "La commande %s ne peut pas ˆtre utilis‚e … l'int‚rieur d'une commande globale ou commande v" -125 "%s/%s : ‚chec de source : ni vous ni le super-utilisateur n'ˆtes les propri‚taires " -126 "%s/%s : ‚chec de source : vous n'ˆtes pas le propri‚taire" -127 "%s/%s : ‚chec de source : peut ˆtre ‚crit par un utilisateur autre que le propri‚taire" -128 "%s : ‚chec de source : ni vous ni le super-utilisateur n'ˆtes les propri‚taires" -129 "%s : ‚chec de source : vous n'ˆtes pas le propri‚taire" -130 "%s : ‚chec de source : peut ˆtre ‚crit par un utilisateur autre que le propri‚taire" -131 "Pas de lignes suivantes … joindre" -132 "Pas d'entr‚es de mappage d'entr‚e" -133 "Pas d'entr‚es de mappage de commandes" -134 "Le caractŠre %s ne peut pas ˆtre remapp‚" -135 ""%s" n'est pas actuellement mapp‚" -136 "Les noms de marque ne doivent avoir qu'un caractŠre" -137 "%s existe, non enregistr‚; utiliser ! pour outrepasser" +120 "Fichier modifié depuis la dernière écriture complète ; écrire ou utiliser ! pour outrepasser" +121 "Impossible de trouver l'emplacement du répertoire d'origine" +122 "Nouveau répertoire en cours : %s" +123 "Pas de tampon de coupure à afficher" +124 "La commande %s ne peut pas être utilisée à l'intérieur d'une commande globale ou commande v" +125 "%s/%s : échec de source : ni vous ni le super-utilisateur n'êtes les propriétaires " +126 "%s/%s : échec de source : vous n'êtes pas le propriétaire" +127 "%s/%s : échec de source : peut être écrit par un utilisateur autre que le propriétaire" +128 "%s : échec de source : ni vous ni le super-utilisateur n'êtes les propriétaires" +129 "%s : échec de source : vous n'êtes pas le propriétaire" +130 "%s : échec de source : peut être écrit par un utilisateur autre que le propriétaire" +131 "Pas de lignes suivantes à joindre" +132 "Pas d'entrées de mappage d'entrée" +133 "Pas d'entrées de mappage de commandes" +134 "Le caractère %s ne peut pas être remappé" +135 "\"%s\" n'est pas actuellement mappé" +136 "Les noms de marque ne doivent avoir qu'un caractère" +137 "%s existe, non enregistré; utiliser ! pour outrepasser" 138 "Nouveau fichier exrc : %s" -139 "La ligne de destination est … l'int‚rieur de la plage … d‚placer" -140 "La commande ouverte n‚cessite que l'option ouverte soit d‚finie" -141 "La commande ouverte n'est pas encore impl‚ment‚e" -142 "La pr‚servation de ce fichier est impossible" -143 "Fichier pr‚serv‚" -144 "%s: ‚tendu dans trop de noms de fichiers" -145 "Vous ne pouvez lire que les fichiers standards et les canaux de transmission nomm‚s" +139 "La ligne de destination est à l'intérieur de la plage à déplacer" +140 "La commande ouverte nécessite que l'option ouverte soit définie" +141 "La commande ouverte n'est pas encore implémentée" +142 "La préservation de ce fichier est impossible" +143 "Fichier préservé" +144 "%s: étendu dans trop de noms de fichiers" +145 "Vous ne pouvez lire que les fichiers standards et les canaux de transmission nommés" 146 "%s: Interdiction de lecture non disponible" 147 "Lecture en cours..." -148 "%s: %lu lignes, %lu caractŠres" -149 "Pas d'‚crans d'arriŠre-plan … afficher" +148 "%s: %lu lignes, %lu caractères" +149 "Pas d'écrans d'arrière-plan à afficher" 150 "La commande script n'est disponible qu'en mode vi" -151 "Pas de commande … ex‚cuter" -152 "Option de largeur de d‚calage d‚finie sur 0" -153 "Compter d‚passement" -154 "Compter d‚passement n‚gatif" -155 "Expression standard sp‚cifi‚e; drapeau r superflu" +151 "Pas de commande à exécuter" +152 "Option de largeur de décalage définie sur 0" +153 "Compter dépassement" +154 "Compter dépassement négatif" +155 "Expression standard spécifiée; drapeau r superflu" 156 "Vous ne pouvez pas en mode vi, combiner les drapeaux #, l et p avec le drapeau c" -157 "Aucune correspondance trouv‚e" -158 "Aucune marque pr‚c‚dente entr‚e" -159 "Moins de %s entr‚es dans la pile de marques ; utilisez t[ags]" +157 "Aucune correspondance trouvée" +158 "Aucune marque précédente entrée" +159 "Moins de %s entrées dans la pile de marques ; utilisez t[ags]" 160 "Pas de fichier %s vers lequel retourner dans la pile de marques ; utiliser : affichage t[ags]" -161 "Appuyez sur Entr‚e pour continuer :" +161 "Appuyez sur Entrée pour continuer :" 162 "%s : marque introuvable" 163 "%s : marque corrompue en %s" -164 "%s : le num‚ro de ligne de la marque d‚passe la fin du fichier" +164 "%s : le numéro de ligne de la marque dépasse la fin du fichier" 165 "La pile de marques est vide" 166 "%s : motif de recherche introuvable" -167 "%d fichiers suppl‚mentaires … ‚diter" +167 "%d fichiers supplémentaires à éditer" 168 "Le tampon %s est vide 169 "Confirmer les changements ? [n]" 170 "Interrompu" -171 "Pas de tampon pr‚c‚dent … ex‚cuter" -172 "Pas d'expression standard pr‚c‚dente" -173 "La commande %s n‚cessite qu'un fichier ait d‚j… ‚t‚ lu en m‚moire" +171 "Pas de tampon précédent à exécuter" +172 "Pas d'expression standard précédente" +173 "La commande %s nécessite qu'un fichier ait déjà été lu en mémoire" 174 "Utilisation : %s" -175 "La commande visuelle n‚cessite que l'option ouverte soit d‚finie" +175 "La commande visual nécessite que l'option open soit définie" 177 "Fichier vide" -178 "Pas de recherche pr‚c‚dente F, f, T ou t" +178 "Pas de recherche précédente F, f, T ou t" 179 "%s introuvable" -180 "Pas de fichier pr‚c‚dent … ‚diter" +180 "Pas de fichier précédent à éditer" 181 "Le curseur n'est pas dans un nombre" 182 "Le nombre obtenu est trop grand" 183 "Le nombre obtenu est trop petit" -184 "Pas de correspondance de caractŠre sur cette ligne" -185 "CaractŠre correspondant introuvable" -186 "Pas de caractŠres … remplacer" -187 "Pas d'autre ‚cran vers lequel basculer" -188 "CaractŠres aprŠs la chaŒne de recherche, d‚calage de ligne et/ou commande z" -189 "Pas de motif de recherche pr‚c‚dent" -190 "La recherche est revenue … son point de d‚part" -191 "L'abr‚viation a d‚pass‚ la limite de l'expansion : caractŠres abandonn‚s" -192 "CaractŠre non valide ; guillemet pour saisir" -193 "D‚j… au d‚but de l'insertion" -194 "Plus de caractŠres … effacer" -195 "D‚placement hors de fin de fichier" -196 "D‚placement hors de fin de ligne" -197 "Aucun mouvement de curseur n'a ‚t‚ effectu‚" -198 "D‚j… au d‚but du fichier" -199 "D‚placement hors du d‚but du fichier" -200 "D‚j… dans la premiŠre colonne" -201 "Les tampons doivent ˆtre sp‚cifi‚s avant la commande" -202 "D‚j… … la fin du fichier" -203 "D‚j… … la fin de la ligne" +184 "Pas de correspondance de caractère sur cette ligne" +185 "Caractère correspondant introuvable" +186 "Pas de caractères à remplacer" +187 "Pas d'autre écran vers lequel basculer" +188 "Caractères après la chaîne de recherche, décalage de ligne et/ou commande z" +189 "Pas de motif de recherche précédent" +190 "La recherche est revenue à son point de départ" +191 "L'abréviation a dépassé la limite de l'expansion : caractères abandonnés" +192 "Caractère non valide ; guillemet pour saisir" +193 "Déjà au début de l'insertion" +194 "Plus de caractères à effacer" +195 "Déplacement hors de fin de fichier" +196 "Déplacement hors de fin de ligne" +197 "Aucun mouvement de curseur n'a été effectué" +198 "Déjà au début du fichier" +199 "Déplacement hors du début du fichier" +200 "Déjà dans la première colonne" +201 "Les tampons doivent être spécifiés avant la commande" +202 "Déjà à la fin du fichier" +203 "Déjà à la fin de la ligne" 204 "%s n'est pas une commande vi" 205 "Utilisation : %s" -206 "Pas de caractŠres … supprimer" -207 "La commande Q n‚cessite une interface terminal ex" -208 "Pas de commande … r‚p‚ter" +206 "Pas de caractères à supprimer" +207 "La commande Q nécessite une interface terminal ex" +208 "Pas de commande à répéter" 209 "Le fichier est vide" -209 "Le fichier est vide" -210 "Vous ne pouvez pas utiliser %s comme commande de d‚placement" -211 "D‚j… en mode commande" +210 "Vous ne pouvez pas utiliser %s comme commande de déplacement" +211 "Déjà en mode commande" 212 "Le curseur n'est pas dans un mot" -214 "Valeur optionnelle de fenˆtre trop grande, maximum est %u" +214 "Valeur optionnelle de fenêtre trop grande, maximum est %u" 215 "Ajouter" 216 "Changer" 217 "Commande" -218 "Ins‚rer" +218 "Insérer" 219 "Remplacer" -220 "D‚placement hors de la fin d'‚cran" -221 "D‚placement hors du d‚but d'‚cran" -222 "L'‚cran doit ˆtre sup‚rieur … %d lignes pour se fractionner" -223 "Il n'y a pas d'‚cran d'arriŠre-plan" -224 "Il n'y a pas d'‚cran d'arriŠre-plan qui ‚dite un fichier nomm‚ %s" -225 "Vous ne pouvez pas mettre … l'arriŠre-plan votre seul ‚cran affich‚" -226 "L'‚cran ne peut ˆtre r‚duit qu'… %d rangs" -227 "L'‚cran n'est pas auto-r‚ductible" -228 "L'‚cran n'est pas auto-extensible" -230 "Vous ne pouvez pas mettre cet ‚cran en attente" -231 "Interrompu : les touches affect‚es ont ‚t‚ abandonn‚es" -232 "vi : le tampon temporaire n' a pas ‚t‚ lib‚r‚" +220 "Déplacement hors de la fin d'écran" +221 "Déplacement hors du début d'écran" +222 "L'écran doit être supérieur à %d lignes pour se fractionner" +223 "Il n'y a pas d'écran d'arrière-plan" +224 "Il n'y a pas d'écran d'arrière-plan qui édite un fichier nommé %s" +225 "Vous ne pouvez pas mettre à l'arrière-plan votre seul écran affiché" +226 "L'écran ne peut être réduit qu'à %d rangs" +227 "L'écran n'est pas auto-réductible" +228 "L'écran n'est pas auto-extensible" +230 "Vous ne pouvez pas mettre cet écran en attente" +231 "Interrompu : les touches affectées ont été abandonnées" +232 "vi : le tampon temporaire n' a pas été libéré" 233 "Ce terminal n'a pas de touche %s" -234 "Vous ne pouvez sp‚cifier qu'un seul tampon" -235 "Nombre sup‚rieur … %lu" +234 "Vous ne pouvez spécifier qu'un seul tampon" +235 "Nombre supérieur à %lu" 236 "Interrompu" -237 "Impossible de cr‚er un fichier temporaire" +237 "Impossible de créer un fichier temporaire" 238 "Avertissement : %s n'est pas un fichier standard" -239 "%s d‚j… verrouill‚, session en lecture seule" +239 "%s déjà verrouillé, session en lecture seule" 240 "%s: supprimer" 241 "%s: fermer" 242 "%s: supprimer" 243 "%s: supprimer" -244 "Fichier en lecture seule, pas ‚crit, utiliser ! pour outrepasser" -245 "Fichier en lecture seule, pas ‚crit" -246 "%s existe, pas ‚crit; utiliser ! pour outrepasser" -247 "%s existe, pas ‚crit" -248 "Fichier partiel, pas ‚crit; utiliser ! pour outrepasser" -249 "Fichier partiel, pas ‚crit" -250 "%s: fichier modifi‚ plus r‚cemment que cet exemplaire; utiliser ! pour outrepasser" -251 "%s: fichier modifi‚ plus r‚cemment que cet exemplaire" -252 "%s: interdiction d'‚criture non disponible" +244 "Fichier en lecture seule, non écrit, utiliser ! pour outrepasser" +245 "Fichier en lecture seule, non écrit" +246 "%s existe, non écrit; utiliser ! pour outrepasser" +247 "%s existe, non écrit" +248 "Fichier partiel, non écrit; utiliser ! pour outrepasser" +249 "Fichier partiel, non écrit" +250 "%s: fichier modifié plus récemment que cet exemplaire; utiliser ! pour outrepasser" +251 "%s: fichier modifié plus récemment que cet exemplaire" +252 "%s: interdiction d'écriture non disponible" 253 "Ecriture en cours..." -254 "%s: AVERTISSEMENT : FICHIER TRONQUE" -255 "PremiŠre marque de ce groupe d‚j… atteinte" -256 "%s: nouveau fichier : %lu lignes, %lu caractŠres" -257 "%s: %lu lignes, %lu caractŠres" -258 "%s ‚tendue … trop de noms de fichiers" +254 "%s: AVERTISSEMENT : FICHIER TRONQUÉ" +255 "Première marque de ce groupe déjà atteinte" +256 "%s: nouveau fichier : %lu lignes, %lu caractères" +257 "%s: %lu lignes, %lu caractères" +258 "%s étendue à trop de noms de fichiers" 259 "%s: pas un fichier standard" 260 "%s: ne vous appartient pas" -261 "%s: accessible par un utilisateur autre que son propri‚taire" -262 "Fichier modif‚ depuis la derniŠre ‚criture complŠte ; ‚crire ou utiliser ! pour outrepasser " -263 "Fichier modif‚ depuis la derniŠre ‚criture complŠte ; ‚crire ou utiliser :edit! pour outrepasser" -264 "Fichier modif‚ depuis la derniŠre ‚criture complŠte ; ‚crire ou utiliser ! pour outrepasser" +261 "%s: accessible par un utilisateur autre que son propriétaire" +262 "Fichier modifé depuis la dernière écriture complète ; écrire ou utiliser ! pour outrepasser " +263 "Fichier modifé depuis la dernière écriture complète ; écrire ou utiliser :edit! pour outrepasser" +264 "Fichier modifé depuis la dernière écriture complète ; écrire ou utiliser ! pour outrepasser" 265 "Fichier temporaire ; quitter annulera les modifications" -266 "Fichier en lecture seule ; les modifications ne sont pas ‚crites automatiquement" -267 "Journal red‚marr‚" +266 "Fichier en lecture seule ; les modifications ne sont pas écrites automatiquement" +267 "Journal redémarré" 268 "confirmer ? [ynq]" 269 "Appuyez sur n'importe quelle touche pour continuer : " 270 "Appuyez sur n'importe quelle touche pour continuer [: pour entrer plus de commandes ex] : " 271 "Appuyez sur n'importe quelle touche pour continuer [q pour Quitter]: " -272 "Cette forme de %s n‚cessite l'interface de terminal ex" -273 "Entr‚e de mode entr‚e ex." -274 "La commande a ‚chou‚, aucun fichier n'a encore ‚t‚ lu." +272 "Cette forme de %s nécessite l'interface de terminal ex" +273 "Entrée de mode entrée ex." +274 "La commande a échoué, aucun fichier n'a encore été lu." 275 "cont?" -276 "Ev‚nement impr‚vu de caractŠre" -277 "Ev‚nement impr‚vu de fin-de-fichier" -278 "Pas de correspondances pour cette requˆte" -279 "Ev‚nement impr‚vu d'interruption" -280 "Ev‚nement quitter impr‚vu" -281 "Ev‚nement impr‚vu de rafraŒchissement" -282 "La derniŠre marque de ce groupe a d‚j… ‚t‚ atteinte" -283 "La commande %s n‚cessite l'interface de terminal ex" -284 "Cette forme de %s n'est pas reconnue quand l'option d'‚dition prot‚g‚e est activ‚e" -285 "Ev‚nement impr‚vu de chaŒne" -286 "Ev‚nement impr‚vu de d‚lai imparti" -287 "Ev‚nement d'‚criture impr‚vu" -289 "Les expansions du shell ne sont pas reconnues quand l'option d'‚dition prot‚g‚e est activ‚e" -290 "La commande %s n'est pas reconnue quand l'option d'‚dition prot‚g‚e est activ‚e" -291 "D‚finition : l'option %s ne peut pas ˆtre d‚sactiv‚e" +276 "Evénement imprévu de caractère" +277 "Evénement imprévu de fin-de-fichier" +278 "Pas de correspondances pour cette requête" +279 "Evénement imprévu d'interruption" +280 "Evénement quitter imprévu" +281 "Evénement imprévu de rafraîchissement" +282 "La dernière marque de ce groupe a déjà été atteinte" +283 "La commande %s nécessite l'interface de terminal ex" +284 "Cette forme de %s n'est pas reconnue quand l'option d'édition protégée est activée" +285 "Evénement imprévu de chaîne" +286 "Evénement imprévu de délai imparti" +287 "Evénement d'écriture imprévu" +289 "Les expansions du shell ne sont pas reconnues quand l'option d'édition protégée est activée" +290 "La commande %s n'est pas reconnue quand l'option d'édition protégée est activée" +291 "Définition : l'option %s ne peut pas être désactivée" 292 "Affichage trop petit." -293 "ajout‚" -294 "chang‚" -295 "supprim‚" +293 "ajouté" +294 "changé" +295 "supprimé" 296 "joint" -297 "d‚plac‚" -298 "d‚cal‚" -299 "coup‚" +297 "déplacé" +298 "décalé" +299 "coupé" 300 "ligne" 301 "lignes" -302 "Vi n'a pas ‚t‚ charg‚ avec un interpr‚tateur Tcl" -303 "Ficher modifi‚ depuis le dernier enregistrement." -304 "L'expansion du shell a ‚chou‚" -304 "L'expansion du shell a ‚chou‚" -305 "Pas d'option d'‚dition %s sp‚cifi‚e" -306 "Vi n'a pas ‚t‚ charg‚ avec un interpr‚tateur Perl" -307 "Pas de commande ex … ex‚cuter" -308 "Entrez <CR> pour ex‚cuter une commande, :q pour quitter" -309 "Utiliser "cscope help" pour obtenir de l'aide" -310 "Aucune connexion cscope n'est lanc‚e" +302 "Vi n'a pas été chargé avec un interprétateur Tcl" +303 "Ficher modifié depuis le dernier enregistrement." +304 "L'expansion du shell a échoué" +305 "Pas d'option d'édition %s spécifiée" +306 "Vi n'a pas été chargé avec un interprétateur Perl" +307 "Pas de commande ex à exécuter" +308 "Entrez <CR> pour exécuter une commande, :q pour quitter" +309 "Utiliser \"cscope help\" pour obtenir de l'aide" +310 "Aucune connexion cscope n'est lancée" 311 "%s : type de recherche inconnu : utiliser un des %s" 312 "%d : Il n'existe pas de telle session cscope" -313 "D‚finition : l'option %s ne peut jamais ˆtre activ‚e" -314 "D‚finition : l'option %s ne peut jamais ˆtre d‚finie sur 0" -315 "%s: joints : %lu lignes, %lu caractŠres" -316 "‚v‚nement impr‚vu de redimensionnement" -317 "%d fichiers … ‚diter" +313 "Définition : l'option %s ne peut jamais être activée" +314 "Définition : l'option %s ne peut jamais être définie sur 0" +315 "%s: joints : %lu lignes, %lu caractères" +316 "événement imprévu de redimensionnement" +317 "%d fichiers à éditer" diff --git a/catalog/french.check b/catalog/french.check deleted file mode 100644 index 1e53d93cb446..000000000000 --- a/catalog/french.check +++ /dev/null @@ -1,34 +0,0 @@ -Unused message id's (this is okay): -001 -047 -050 -051 -052 -081 -176 -229 -288 -========================= -MISSING ERROR MESSAGES (Please add!): -========================= -Extra error messages (just delete them): -========================= -MESSAGES WITH THE SAME MESSAGE ID's (FIX!): -========================= -Duplicate messages, both id and message (this is okay): - 2 209 "Le fichier est vide" - 2 304 "L'expansion du shell a ‚chou‚" -========================= -Duplicate messages, just message (this is okay): - 2 %s : Fichier de r‚cup‚ration malform‚X - 2 %s: %lu lignes, %lu caractŠresX - 2 Aucune connexion n'‚tant effectu‚e, impossible d'annulerX - 2 Copie en cours du fichier pour r‚cup‚ration...X - 2 D‚finition : l'option %s n'est pas bool‚enneX - 2 Impossible de r‚cup‚rer les modifications si la session ‚choueX - 2 InterrompuX - 2 La recherche est revenue … son point de d‚partX - 2 Pas de motif de recherche pr‚c‚dentX - 3 %s: supprimerX - 4 Utilisation : %sX -========================= diff --git a/catalog/german b/catalog/german deleted file mode 100644 index 0810ba6cf9b4..000000000000 --- a/catalog/german +++ /dev/null @@ -1,317 +0,0 @@ -VI_MESSAGE_CATALOG -Zeilenlaengen UeberlaufX -kann Zeile %lu nicht loeschenX -kann an Zeile %lu nicht anfuegenX -kann in Zeile %lu nicht einfuegenX -kann Zeile %lu nicht speichernX -kann letzte Zeile nicht lesenX -Fehler: kann Zeile %lu nicht wiederherstellenX -ProtokolldateiX -Keine Protokollierung aktiv, rueckgaengig machen nicht moeglichX -Keine Aenderungen rueckgaengig zu machenX -Keine Protokollierung aktiv, rueckgaengig machen nicht moeglichX -Keine Protokollierung aktiv, Wiederholung von Aenderungen nicht moeglichX -Keine Aenderungen zu wiederholenX -%s/%d: ProtokollschreibfehlerX -Vi's Standardein- und ausgabe muss ein Terminal seinX -Marke %s: nicht gesetztX -Marke %s: die Zeile wurde geloeschtX -Marke %s: Cursorposition existiert nicht mehrX -Fehler: X -neue DateiX -Name geaendertX -geaendertX -nicht geaendertX -NICHT GELOCKEDX -nur zum LesenX -Zeile %lu von %lu [%ld%%]X -leere DateiX -Zeile %luX -Die Datei %s ist kein MeldungskatalogX -Setzen der Voreinstellung fuer %s Option nicht moeglichX -Benutzung: %sX -set: keine %s Option: 'set all' zeigt alle Optionen mit Werten anX -set: der [no]%s Option kann kein Wert zugewiesen werdenX -set: %s ist keine boolsche OptionX -set: %s Option: %sX -set: %s Option: %s: Wert UeberlaufX -set: %s Option: %s ist eine ungueltige ZahlX -set: %s ist keine boolsche OptionX -Anzeige hat zu wenig Spalten, weniger als %dX -Anzeige hat zu viele Spalten, mehr als %dX -Anzeige hat zu wenig Zeilen, weniger als %dX -Anzeige hat zu viele Zeilen, mehr als %dX -Die lisp Option ist nicht implementiertX -Messages nicht abgeschalten: %sX -Messages nicht eingeschalten: %sX - -Die paragraph Option muss Gruppen zu zwei Zeichen enthaltenX -Die section Option muss Gruppen zu zwei Zeichen enthaltenX - - - -Der Standardpuffer ist leerX -Puffer %s ist leerX -Dateien mit newlines im Namen sind nicht wiederherstellbarX -Aenderungen nicht wiederherstellbar falls die Editorsitzung schief gehtX -kopiere Datei fuer Wiederherstellung ...X -Rettungsmechanismus funktioniert nicht: %sX -Aenderungen nicht wiederherstellbar falls die Editorsitzung schief gehtX -Sicherung der Datei gescheitert: %sX -kopiere Datei fuer Wiederherstellung ...X -Informationen ueber den Benutzer mit id %u nicht gefundenX -Wiederherstellungsdatei kann nicht gesperrt werdenX -Puffer der Wiederherstellungsdatei uebergelaufenX -WiederherstellungsdateiX -%s: Wiederherstellungsdatei hat falsches FormatX -%s: Wiederherstellungsdatei hat falsches FormatX -Keine von Ihnen lesbaren Dateien mit Namen %s zum WiederherstellenX -Es gibt aeltere Versionen dieser Datei von Ihnen zum WiederherstellenX -Sie haben noch andere Dateien zum WiederherstellenX -schicke keine email: %sX -Datei leer; nichts zu suchenX -Dateiende erreicht, ohne das Suchmuster zu findenX -Kein altes SuchmusterX -Suchmuster nicht gefundenX -Dateianfang erreicht, ohne das Suchmuster zu findenX -Suche umgeschlagenX -suche ...X -Keine nichtdruckbaren Zeichen gefundenX -Unbekannter KommandonameX - -%s: Kommando im ex Modus nicht verfuegbarX -Count darf nicht Null seinX -%s: falsche ZeilenangabeX -Interner Syntaxtabellenfehler (%s: %s)X -Benutzung: %sX -%s: temporaerer Puffer nicht freigegebenX -Flagoffset vor Zeile 1X -Flagoffset hinter dem DateiendeX -@ mit Bereich lief als Datei/Anzeige geaendert wurdeX -globales oder v-Kommando lief als Datei/Anzeige geaendert wurdeX -Ex Kommando misslungen: restliche Kommandoeingabe ignoriertX -Ex Kommando misslungen: umdefinierte Tasten ungueltigX -Die zweite Adresse ist kleiner als die ersteX -Kein Markenname angegebenX -\\ ohne folgenden / oder ?X -Referenz auf eine negative ZeilennummerX -Das Kommando %s ist unbekanntX -Adresswert zu grossX -Adresswert zu kleinX -Ungueltige AdresskombinationX -Ungueltige Adresse: nur %lu Zeilen in der DateiX -Ungueltige Adresse: die Datei ist leerX -Das Kommando %s erlaubt keine Adresse 0X -Keine Abkuerzungen zum AnzeigenX -Abkuerzungen muessen mit einem "Wort"-Zeichen endenX -Abkuerzungen duerfen keine Tabulator- oder Leerzeichen enthaltenX -In Abkuerzungen duerfen ausser am Ende Wort- und Nicht-Wort-Zeichen nicht gemischt werdenX -"%s" ist keine AbkuerzungX -Vi Kommando misslungen: umdefinierte Tasten ungueltigX -Keine weiteren Dateien zu edierenX -Keine vorhergehenden Dateien zu edierenX -Keine vorhergehenden Dateien fuer rewindX -Keine Dateiliste zum AnzeigenX -Kein vorhergehendes Kommando um "!" zu ersetzenX -Kein Dateiname fuer %%X -Kein Dateiname fuer #X -Fehler: execl: %sX -I/O Fehler: %sX -Datei wurde seit dem letzten vollstaendigen Schreiben geaendert; schreibe oder verwende ! zum ignorierenX -Kann Homedirectory nicht bestimmenX -Neues aktuelles Directory: %sX -Keine Puffer anzuzeigenX -Das Kommando %s kann nicht als Teil eines global oder v Kommandos verwendet werdenX -%s/%s: nicht gelesen: gehoehrt weder Ihnen noch rootX -%s/%s: nicht gelesen: gehoehrt nicht IhnenX -%s/%s: nicht gelesen: anderer Benutzer als Eigentuemer hat SchreibrechtX -%s: nicht gelesen: gehoehrt weder Ihnen noch rootX -%s: nicht gelesen: gehoehrt nicht IhnenX -%s: nicht gelesen: anderer Benutzer als Eigentuemer hat SchreibrechtX -Keine folgenden Zeilen zum VerbindenX -Kein Eingabe-Map EintragX -Kein Kommando-Map EintragX -Das %s Zeichen kann nicht umgemappt werdenX -"%s" ist momentan nicht gemapptX -Markennamen muessen einzelne Buchstaben seinX -%s existiert, nicht geschrieben; verwende ! zum UeberschreibenX -Neue .exrc Datei: %s. X -Zielzeile ist innerhalb des VerschiebebereichsX -Das open Kommando verlangt, dass die open Option gesetzt istX -Das open Kommando ist nocht nicht implementiertX -Rettung dieser Datei nicht moeglichX -Datei gerettetX -%s wurde in zu viele Dateinamen expandiertX -Nur regulaere Dateien und named pipes koennen gelesen werdenX -%s: Lesesperrung war nicht moeglichX -lese ...X -%s: %lu Zeilen, %lu ZeichenX -Keine Hintegrundanzeigen vorhandenX -Das script Kommando ist nur im vi Modus verfuegbarX -Kein Kommando auszufuehrenX -shiftwidth Option auf 0 gesetztX -Count ueberlaufX -Count unterlaufX -Regulaerer Ausdruck angegeben; r Flag bedeutungslosX -Die #, l und p Flags koennen im vi Modus nicht mit dem c Flag kombiniert werdenX -Keine Uebereinstimmung gefundenX -Kein vorhergehender 'tag' angegebenX -Weniger als %s Eintraege auf dem 'tag'-Stack; verwende :display t[ags]X -Keine Datei namens %s auf dem 'tag'-Stack; verwende :display t[ags]X -Druecke Enter um fortzufahren: X -%s: 'tag' nicht gefundenX -%s: kaputter 'tag' in %sX -%s: die Zeilennummer des 'tag' ist hinter dem DateiendeX -Der 'tag' Stack ist leerX -%s: Suchmuster nicht gefundenX -%d weitere Dateien zu edierenX -Puffer %s ist leerX -Bestaetige Aenderung [n]X -Unterbrochen.X -Kein vorhergehender Puffer zum AusfuehrenX -Kein vorhergehender regulaerer AusdruckX -Das Kommando %s verlangt, dass bereits eine Datei eingelesen wurdeX -Benutzung: %sX -Das visual Kommando verlangt dass die open Option gesetzt istX - -Leere DateiX -Keine vorhergehende F, f, T oder t SucheX -%s nicht gefundenX -Keine vorhergehende Datei zu edierenX -Cursor nicht auf einer ZahlX -Sich ergebende Zahl ist zu grossX -Sich ergebende Zahl ist zu kleinX -Kein korrespondierendes Zeichen in dieser ZeileX -Korrespondierendes Zeichen nicht gefundenX -Keine Zeichen zu ersetzenX -Keine andere Anzeige zum HinschaltenX -Zeichen nach Suchmuster, Zeilenoffset und/oder z KommandoX -Kein altes SuchmusterX -Suche zur urspruenglichen Position umgeschlagenX -Abkuerzung ueberschreitet Expansionsgrenze: Zeichen weggelassenX -Nicht erlaubtes Zeichen; maskiere zum EingebenX -Bereits am Anfang der EingabeX -Keine weiteren Zeichen zu loeschenX -Bewegung hinter das DateiendeX -Bewegung hinter das ZeilenendeX -Keine Cursorbewegung gemachtX -Bereits am DateianfangX -Bewegung vor den DateianfangX -Bereits in der ersten SpalteX -Puffer sollen vor dem Kommando angegeben werdenX -Bereits am DateiendeX -Bereits am ZeilenendeX -%s ist kein vi KommandoX -Benutzung: %sX -Keine Zeichen zu loeschenX -Das Q Kommando benoetigt das ex Terminal InterfaceX -Kein Kommando zu wiederholenX -Die Datei ist leerX -%s kann nicht als Bewegungskommando verwendet werdenX -Bereits im Kommando-ModusX - Cursor nicht auf einem WortX - -Wert der Window Option ist zu gross, max ist %uX -AnfuegenX -AendernX -KommandoX -EinfuegenX -ErsetzenX -Bewegung hinter das AnzeigenendeX -Bewegung vor den AnzeigenanfangX -Anzeige muss zum Zerlegen groesser als %d seinX -Keine Hintergrundanzeigen vorhandenX -Es gibt keine Hintergrundanzeige die eine Datei namens %s ediertX -Die einzige dargestellte Anzeige kann nicht in den Hintergrund gebracht werdenX -Die Anzeige kann nur auf %d Zeilen verkleinert werdenX -Die Anzeige kann nicht verkleinert werdenX -Die Anzeige kann nicht vergroessert werdenX - -Diese Anzeige kann nicht gestopped werdenX -Unterbrochen: umdefinierte Tasten ungueltigX -vi: temporaerer Puffer nicht freigegebenX -Dieses Terminal hat keine %s TasteX -es kann nur ein Puffer angegeben werdenX -Zahl groesser als %luX -UnterbrochenX -Nicht moeglich temporaere Datei anzulegenX -Warnung: %s ist keine regulaere DateiX -%s ist bereits gesperrt, nur-lese EditorsitzungX -%s: loeschenX -%s: schliessenX -%s: loeschenX -%s: loeschenX -Nur-lese Datei, nicht geschrieben; verwende ! zum UeberschreibenX -Nur-lese Datei, nicht geschriebenX -%s existiert, nicht geschrieben; verwende ! zum UeberschreibenX -%s existiert, nicht geschriebenX -Teil der Datei, nicht geschrieben; verwende ! zum UeberschreibenX -Teil der Datei, nicht geschriebenX -%s: Datei wurde spaeter als diese Kopie veraendert; verwende ! zum UeberschreibenX -%s: Datei wurde spaeter als diese Kopie veraendertX -%s: Schreibsperrung war nicht moeglichX -schreibe ...X -%s: WARNUNG: DATEI ABGESCHNITTENX -Bereits am ersten 'tag' dieser GruppeX -%s: neue Datei: %lu Zeilen, %lu ZeichenX -%s: %lu Zeilen, %lu ZeichenX -%s wurde in zu viele Dateinamen expandiertX -%s: keine regulaere DateiX -%s: gehoehrt nicht IhnenX -%s: anderer Benutzer als Eigentuemer hat ZugriffX -Datei wurde seit dem letzten vollstaendigen Schreiben geaendert; schreibe oder verwende ! zum ignorierenX -Datei wurde seit dem letzten vollstaendigen Schreiben geaendert; schreibe oder verwende :edit! zum ignorierenX -Datei wurde seit dem letzten vollstaendigen Schreiben geaendert; schreibe oder verwende ! zum ignorierenX -Datei ist temporaer; beim Verlassen gehen die Aenderungen verlorenX -Nur-lese Datei, Aenderungen werden nicht automatisch geschriebenX -Portokollierung neu begonnenX -bestaetigen [ynq]X -Druecke beliebige Taste um fortzufahrenX -Druecke beliebige Taste um fortzufahren [: um weitere Kommandos einzugeben]: X -Druecke beliebige Taste um fortzufahren [q zum Verlassen]: X -Diese Form von %s benoetigt das ex Terminal-InterfaceX -Gehe in ex Eingabe-Modus.\nX -Kommando schief gelaufen, noch keine Datei eingelesenX - weiter?X -unerwartetes Zeichen - EreignisX -unerwartetes Dateiende - EreignisX -Keine Position zum Anspringen gefundenX -unerwartetes Unterbrechungs - EreignisX -unerwartetes Verlassen - EreignisX -unerwartetes Wiederherstellungs - EreignisX -Bereits am letzten 'tag' dieser GruppeX -Das %s Kommando benoetigt das ex Terminal-InterfaceX -Diese Form von %s wird nicht unterstuetzt wenn die 'secure edit' - Option gesetzt istX -unerwartetes Zeichenketten - EreignisX -unerwartetes timeout - EreignisX -unerwartetes Schreibe - EreignisX - -Shell Expandierungen nicht unterstuetzt wenn die 'secure edit' - Option gesetzt istX -Das %s Kommando wird nicht unterstuetzt wenn die 'secure edit' - Option gesetzt istX -set: %s kann nicht ausgeschaltet werdenX -Anzeige zu klein.X -angefuegtX -geaendertX -geloeschtX -verbundenX -verschobenX -geschobenX -in Puffer geschriebenX -ZeileX -ZeilenX -Vi wurde nicht mit dem Tcl Interpreter gelinktX -Datei wurde seit dem letzten Schreiben veraendert.X -Shell Expansion nicht geklapptX -Es ist keine %s Edieroption angegebenX -Vi wurde nicht mit einem Perl Interpreter geladenX -Kein ex Kommando auszufuehrenX -Druecke <CR> um ein Kommando auszufuehren, :q zum verlassenX -Verwende "cscope help" fuer HilestellungX -Keine cscope Verbindung aktivX -%s: unbekannter Suchtyp: verwende einen aus %sX -%d: keine solche cscope VerbindungX -set: die %s Option kann nicht eingeschaltet werdenX -set: die %s Option kann nicht auf 0 gesetzt werdenX -%s: angefuegt: %lu Zeilen, %lu ZeichenX -unerwartetes Groessenveraenderungs - EreignisX -%d Dateien zu edierenX diff --git a/catalog/german.base b/catalog/german.base index 135b72da7994..f636df2b9c18 100644 --- a/catalog/german.base +++ b/catalog/german.base @@ -1,67 +1,66 @@ -002 "Zeilenlaengen Ueberlauf" -003 "kann Zeile %lu nicht loeschen" -004 "kann an Zeile %lu nicht anfuegen" -005 "kann in Zeile %lu nicht einfuegen" +002 "Zeilenlängen-Überlauf" +003 "kann Zeile %lu nicht löschen" +004 "kann an Zeile %lu nicht anfügen" +005 "kann in Zeile %lu nicht einfügen" 006 "kann Zeile %lu nicht speichern" 007 "kann letzte Zeile nicht lesen" 008 "Fehler: kann Zeile %lu nicht wiederherstellen" 009 "Protokolldatei" -010 "Keine Protokollierung aktiv, rueckgaengig machen nicht moeglich" -011 "Keine Aenderungen rueckgaengig zu machen" -012 "Keine Protokollierung aktiv, rueckgaengig machen nicht moeglich" -013 "Keine Protokollierung aktiv, Wiederholung von Aenderungen nicht moeglich" -014 "Keine Aenderungen zu wiederholen" +010 "Keine Protokollierung aktiv, Rückgängigmachen nicht möglich" +011 "Keine Änderungen rückgängig zu machen" +012 "Keine Protokollierung aktiv, Rückgängigmachen nicht möglich" +013 "Keine Protokollierung aktiv, Wiederholung von Änderungen nicht möglich" +014 "Keine Änderungen zu wiederholen" 015 "%s/%d: Protokollschreibfehler" -016 "Vi's Standardein- und ausgabe muss ein Terminal sein" +016 "Vi's Standardein- und -ausgabe muß ein Terminal sein" 017 "Marke %s: nicht gesetzt" -018 "Marke %s: die Zeile wurde geloescht" +018 "Marke %s: die Zeile wurde gelöscht" 019 "Marke %s: Cursorposition existiert nicht mehr" 020 "Fehler: " 021 "neue Datei" -022 "Name geaendert" -023 "geaendert" -024 "nicht geaendert" -025 "NICHT GELOCKED" +022 "Name geändert" +023 "geändert" +024 "nicht geändert" +025 "NICHT GELOCKT" 026 "nur zum Lesen" 027 "Zeile %lu von %lu [%ld%%]" 028 "leere Datei" 029 "Zeile %lu" 030 "Die Datei %s ist kein Meldungskatalog" -031 "Setzen der Voreinstellung fuer %s Option nicht moeglich" +031 "Setzen der Voreinstellung für %s Option nicht möglich" 032 "Benutzung: %s" 033 "set: keine %s Option: 'set all' zeigt alle Optionen mit Werten an" 034 "set: der [no]%s Option kann kein Wert zugewiesen werden" -035 "set: %s ist keine boolsche Option" +035 "set: %s ist keine Boolsche Option" 036 "set: %s Option: %s" -037 "set: %s Option: %s: Wert Ueberlauf" -038 "set: %s Option: %s ist eine ungueltige Zahl" -039 "set: %s ist keine boolsche Option" -040 "Anzeige hat zu wenig Spalten, weniger als %d" -041 "Anzeige hat zu viele Spalten, mehr als %d" -042 "Anzeige hat zu wenig Zeilen, weniger als %d" -043 "Anzeige hat zu viele Zeilen, mehr als %d" -044 "Die lisp Option ist nicht implementiert" -045 "Messages nicht abgeschalten: %s" -046 "Messages nicht eingeschalten: %s" -048 "Die paragraph Option muss Gruppen zu zwei Zeichen enthalten" -049 "Die section Option muss Gruppen zu zwei Zeichen enthalten" +037 "set: %s Option: %s: Werte-Überlauf" +038 "set: %s Option: %s ist eine ungültige Zahl" +039 "set: %s ist keine Boolsche Option" +040 "Bildschirm hat zu wenig Spalten, weniger als %d" +041 "Bildschirm hat zu viele Spalten, mehr als %d" +042 "Bildschirm hat zu wenig Zeilen, weniger als %d" +043 "Bildschirm hat zu viele Zeilen, mehr als %d" +044 "Die lisp-Option ist nicht implementiert" +045 "Meldungen nicht abgeschaltet: %s" +046 "Meldungen nicht eingeschaltet: %s" +047 "Die %s-Option muß Gruppen zu zwei Zeichen enthalten" 053 "Der Standardpuffer ist leer" 054 "Puffer %s ist leer" 055 "Dateien mit newlines im Namen sind nicht wiederherstellbar" -056 "Aenderungen nicht wiederherstellbar falls die Editorsitzung schief geht" -057 "kopiere Datei fuer Wiederherstellung ..." +056 "Änderungen nicht wiederherstellbar, falls die Editorsitzung schiefgeht" +057 "kopiere Datei für Wiederherstellung ..." 058 "Rettungsmechanismus funktioniert nicht: %s" -059 "Aenderungen nicht wiederherstellbar falls die Editorsitzung schief geht" +059 "Änderungen nicht wiederherstellbar, falls die Editorsitzung schiefgeht" 060 "Sicherung der Datei gescheitert: %s" -061 "kopiere Datei fuer Wiederherstellung ..." -062 "Informationen ueber den Benutzer mit id %u nicht gefunden" -063 "Wiederherstellungsdatei kann nicht gesperrt werden" -064 "Puffer der Wiederherstellungsdatei uebergelaufen" +061 "kopiere Datei für Wiederherstellung ..." +062 "Informationen über den Benutzer mit id %u nicht gefunden" +063 "Wiederherstellungsdatei kann nicht gelockt werden" +064 "Puffer der Wiederherstellungsdatei übergelaufen" 065 "Wiederherstellungsdatei" 066 "%s: Wiederherstellungsdatei hat falsches Format" 067 "%s: Wiederherstellungsdatei hat falsches Format" 068 "Keine von Ihnen lesbaren Dateien mit Namen %s zum Wiederherstellen" -069 "Es gibt aeltere Versionen dieser Datei von Ihnen zum Wiederherstellen" +069 "Es gibt ältere Versionen dieser Datei von Ihnen zum Wiederherstellen" 070 "Sie haben noch andere Dateien zum Wiederherstellen" 071 "schicke keine email: %s" 072 "Datei leer; nichts zu suchen" @@ -69,110 +68,110 @@ 074 "Kein altes Suchmuster" 075 "Suchmuster nicht gefunden" 076 "Dateianfang erreicht, ohne das Suchmuster zu finden" -077 "Suche umgeschlagen" +077 "Suche beginnt von vorn" 078 "suche ..." 079 "Keine nichtdruckbaren Zeichen gefunden" 080 "Unbekannter Kommandoname" -082 "%s: Kommando im ex Modus nicht verfuegbar" -083 "Count darf nicht Null sein" +082 "%s: Kommando im ex-Modus nicht verfügbar" +083 "Anzahl darf nicht Null sein" 084 "%s: falsche Zeilenangabe" 085 "Interner Syntaxtabellenfehler (%s: %s)" 086 "Benutzung: %s" -087 "%s: temporaerer Puffer nicht freigegeben" +087 "%s: temporärer Puffer nicht freigegeben" 088 "Flagoffset vor Zeile 1" 089 "Flagoffset hinter dem Dateiende" -090 "@ mit Bereich lief als Datei/Anzeige geaendert wurde" -091 "globales oder v-Kommando lief als Datei/Anzeige geaendert wurde" -092 "Ex Kommando misslungen: restliche Kommandoeingabe ignoriert" -093 "Ex Kommando misslungen: umdefinierte Tasten ungueltig" +090 "@ mit Bereich lief, als Datei/Anzeige geändert wurde" +091 "globales oder v-Kommando lief, als Datei/Anzeige geändert wurde" +092 "Ex-Kommando mißlungen: restliche Kommandoeingabe ignoriert" +093 "Ex-Kommando mißlungen: umdefinierte Tasten ungültig" 094 "Die zweite Adresse ist kleiner als die erste" 095 "Kein Markenname angegeben" 096 "\\ ohne folgenden / oder ?" 097 "Referenz auf eine negative Zeilennummer" 098 "Das Kommando %s ist unbekannt" -099 "Adresswert zu gross" -100 "Adresswert zu klein" -101 "Ungueltige Adresskombination" -102 "Ungueltige Adresse: nur %lu Zeilen in der Datei" -103 "Ungueltige Adresse: die Datei ist leer" +099 "Adreßwert zu groß" +100 "Adreßwert zu klein" +101 "Ungültige Adreßkombination" +102 "Ungültige Adresse: nur %lu Zeilen in der Datei" +103 "Ungültige Adresse: die Datei ist leer" 104 "Das Kommando %s erlaubt keine Adresse 0" -105 "Keine Abkuerzungen zum Anzeigen" -106 "Abkuerzungen muessen mit einem "Wort"-Zeichen enden" -107 "Abkuerzungen duerfen keine Tabulator- oder Leerzeichen enthalten" -108 "In Abkuerzungen duerfen ausser am Ende Wort- und Nicht-Wort-Zeichen nicht gemischt werden" -109 ""%s" ist keine Abkuerzung" -110 "Vi Kommando misslungen: umdefinierte Tasten ungueltig" -111 "Keine weiteren Dateien zu edieren" -112 "Keine vorhergehenden Dateien zu edieren" -113 "Keine vorhergehenden Dateien fuer rewind" +105 "Keine Abkürzungen zum Anzeigen" +106 "Abkürzungen müssen mit einem \"Wort\"-Zeichen enden" +107 "Abkürzungen dürfen keine Tabulator- oder Leerzeichen enthalten" +108 "In Abkürzungen dürfen außer am Ende Wort- und Nicht-Wort-Zeichen nicht gemischt werden" +109 "\"%s\" ist keine Abkürzung" +110 "Vi Kommando mißlungen: umdefinierte Tasten ungültig" +111 "Keine weiteren Dateien zu editieren" +112 "Keine vorhergehenden Dateien zu editieren" +113 "Keine vorhergehenden Dateien für rewind" 114 "Keine Dateiliste zum Anzeigen" -115 "Kein vorhergehendes Kommando um "!" zu ersetzen" -116 "Kein Dateiname fuer %%" -117 "Kein Dateiname fuer #" +115 "Kein vorhergehendes Kommando, um \"!\" zu ersetzen" +116 "Kein Dateiname für %%" +117 "Kein Dateiname für #" 118 "Fehler: execl: %s" -119 "I/O Fehler: %s" -120 "Datei wurde seit dem letzten vollstaendigen Schreiben geaendert; schreibe oder verwende ! zum ignorieren" +119 "E/A-Fehler: %s" +120 "Datei wurde seit dem letzten vollständigen Schreiben geändert; schreibe oder verwende ! zum ignorieren" 121 "Kann Homedirectory nicht bestimmen" 122 "Neues aktuelles Directory: %s" 123 "Keine Puffer anzuzeigen" 124 "Das Kommando %s kann nicht als Teil eines global oder v Kommandos verwendet werden" -125 "%s/%s: nicht gelesen: gehoehrt weder Ihnen noch root" -126 "%s/%s: nicht gelesen: gehoehrt nicht Ihnen" -127 "%s/%s: nicht gelesen: anderer Benutzer als Eigentuemer hat Schreibrecht" -128 "%s: nicht gelesen: gehoehrt weder Ihnen noch root" -129 "%s: nicht gelesen: gehoehrt nicht Ihnen" -130 "%s: nicht gelesen: anderer Benutzer als Eigentuemer hat Schreibrecht" +125 "%s/%s: nicht gelesen: gehört weder Ihnen noch root" +126 "%s/%s: nicht gelesen: gehört nicht Ihnen" +127 "%s/%s: nicht gelesen: anderer Benutzer als Eigentümer hat Schreibrecht" +128 "%s: nicht gelesen: gehört weder Ihnen noch root" +129 "%s: nicht gelesen: gehört nicht Ihnen" +130 "%s: nicht gelesen: anderer Benutzer als Eigentümer hat Schreibrecht" 131 "Keine folgenden Zeilen zum Verbinden" -132 "Kein Eingabe-Map Eintrag" -133 "Kein Kommando-Map Eintrag" +132 "Kein input-Map Eintrag" +133 "Kein command-Map Eintrag" 134 "Das %s Zeichen kann nicht umgemappt werden" -135 ""%s" ist momentan nicht gemappt" -136 "Markennamen muessen einzelne Buchstaben sein" -137 "%s existiert, nicht geschrieben; verwende ! zum Ueberschreiben" +135 "\"%s\" ist momentan nicht gemappt" +136 "Markennamen müssen einzelne Buchstaben sein" +137 "%s existiert, nicht geschrieben; verwende ! zum Überschreiben" 138 "Neue .exrc Datei: %s. " 139 "Zielzeile ist innerhalb des Verschiebebereichs" -140 "Das open Kommando verlangt, dass die open Option gesetzt ist" +140 "Das open Kommando verlangt, daß die open Option gesetzt ist" 141 "Das open Kommando ist nocht nicht implementiert" -142 "Rettung dieser Datei nicht moeglich" +142 "Rettung dieser Datei nicht möglich" 143 "Datei gerettet" 144 "%s wurde in zu viele Dateinamen expandiert" -145 "Nur regulaere Dateien und named pipes koennen gelesen werden" -146 "%s: Lesesperrung war nicht moeglich" +145 "Nur reguläre Dateien und named pipes können gelesen werden" +146 "%s: Locken zum Lesen war nicht möglich" 147 "lese ..." 148 "%s: %lu Zeilen, %lu Zeichen" -149 "Keine Hintegrundanzeigen vorhanden" -150 "Das script Kommando ist nur im vi Modus verfuegbar" -151 "Kein Kommando auszufuehren" +149 "Keine Hintergrundanzeigen vorhanden" +150 "Das script Kommando ist nur im vi Modus verfügbar" +151 "Kein Kommando auszuführen" 152 "shiftwidth Option auf 0 gesetzt" -153 "Count ueberlauf" -154 "Count unterlauf" -155 "Regulaerer Ausdruck angegeben; r Flag bedeutungslos" -156 "Die #, l und p Flags koennen im vi Modus nicht mit dem c Flag kombiniert werden" -157 "Keine Uebereinstimmung gefunden" +153 "Anzahl-Überlauf" +154 "Anzahl-Unterlauf" +155 "Regulärer Ausdruck angegeben; r Flag bedeutungslos" +156 "Die #, l und p Flags können im vi Modus nicht mit dem c Flag kombiniert werden" +157 "Keine Übereinstimmung gefunden" 158 "Kein vorhergehender 'tag' angegeben" -159 "Weniger als %s Eintraege auf dem 'tag'-Stack; verwende :display t[ags]" +159 "Weniger als %s Einträge auf dem 'tag'-Stack; verwende :display t[ags]" 160 "Keine Datei namens %s auf dem 'tag'-Stack; verwende :display t[ags]" -161 "Druecke Enter um fortzufahren: " +161 "Drücke Enter um fortzufahren: " 162 "%s: 'tag' nicht gefunden" 163 "%s: kaputter 'tag' in %s" 164 "%s: die Zeilennummer des 'tag' ist hinter dem Dateiende" 165 "Der 'tag' Stack ist leer" 166 "%s: Suchmuster nicht gefunden" -167 "%d weitere Dateien zu edieren" +167 "%d weitere Dateien zu editieren" 168 "Puffer %s ist leer" -169 "Bestaetige Aenderung [n]" +169 "Bestätige Änderung [n]" 170 "Unterbrochen." -171 "Kein vorhergehender Puffer zum Ausfuehren" -172 "Kein vorhergehender regulaerer Ausdruck" -173 "Das Kommando %s verlangt, dass bereits eine Datei eingelesen wurde" +171 "Kein vorhergehender Puffer zum Ausführen" +172 "Kein vorhergehender regulärer Ausdruck" +173 "Das Kommando %s verlangt, daß bereits eine Datei eingelesen wurde" 174 "Benutzung: %s" -175 "Das visual Kommando verlangt dass die open Option gesetzt ist" +175 "Das visual Kommando verlangt daß die open Option gesetzt ist" 177 "Leere Datei" 178 "Keine vorhergehende F, f, T oder t Suche" 179 "%s nicht gefunden" -180 "Keine vorhergehende Datei zu edieren" +180 "Keine vorhergehende Datei zu editieren" 181 "Cursor nicht auf einer Zahl" -182 "Sich ergebende Zahl ist zu gross" +182 "Sich ergebende Zahl ist zu groß" 183 "Sich ergebende Zahl ist zu klein" 184 "Kein korrespondierendes Zeichen in dieser Zeile" 185 "Korrespondierendes Zeichen nicht gefunden" @@ -180,11 +179,11 @@ 187 "Keine andere Anzeige zum Hinschalten" 188 "Zeichen nach Suchmuster, Zeilenoffset und/oder z Kommando" 189 "Kein altes Suchmuster" -190 "Suche zur urspruenglichen Position umgeschlagen" -191 "Abkuerzung ueberschreitet Expansionsgrenze: Zeichen weggelassen" +190 "Suche zur ursprünglichen Position zurückgekehrt" +191 "Abkürzung überschreitet Expansionsgrenze: Zeichen weggelassen" 192 "Nicht erlaubtes Zeichen; maskiere zum Eingeben" 193 "Bereits am Anfang der Eingabe" -194 "Keine weiteren Zeichen zu loeschen" +194 "Keine weiteren Zeichen zu löschen" 195 "Bewegung hinter das Dateiende" 196 "Bewegung hinter das Zeilenende" 197 "Keine Cursorbewegung gemacht" @@ -196,73 +195,73 @@ 203 "Bereits am Zeilenende" 204 "%s ist kein vi Kommando" 205 "Benutzung: %s" -206 "Keine Zeichen zu loeschen" -207 "Das Q Kommando benoetigt das ex Terminal Interface" +206 "Keine Zeichen zu löschen" +207 "Das Q Kommando benötigt das ex Terminal Interface" 208 "Kein Kommando zu wiederholen" 209 "Die Datei ist leer" 210 "%s kann nicht als Bewegungskommando verwendet werden" 211 "Bereits im Kommando-Modus" 212 " Cursor nicht auf einem Wort" -214 "Wert der Window Option ist zu gross, max ist %u" -215 "Anfuegen" -216 "Aendern" +214 "Wert der Window Option ist zu groß, max ist %u" +215 "Anhängen" +216 "Ändern" 217 "Kommando" -218 "Einfuegen" +218 "Einfügen" 219 "Ersetzen" 220 "Bewegung hinter das Anzeigenende" 221 "Bewegung vor den Anzeigenanfang" -222 "Anzeige muss zum Zerlegen groesser als %d sein" +222 "Anzeige muß für Bildschirmteilung größer als %d sein" 223 "Keine Hintergrundanzeigen vorhanden" -224 "Es gibt keine Hintergrundanzeige die eine Datei namens %s ediert" +224 "Es gibt keine Hintergrundanzeige, die eine Datei namens %s editiert" 225 "Die einzige dargestellte Anzeige kann nicht in den Hintergrund gebracht werden" 226 "Die Anzeige kann nur auf %d Zeilen verkleinert werden" 227 "Die Anzeige kann nicht verkleinert werden" -228 "Die Anzeige kann nicht vergroessert werden" -230 "Diese Anzeige kann nicht gestopped werden" -231 "Unterbrochen: umdefinierte Tasten ungueltig" -232 "vi: temporaerer Puffer nicht freigegeben" +228 "Die Anzeige kann nicht vergrößert werden" +230 "Diese Anzeige kann nicht gestopt werden" +231 "Unterbrochen: umdefinierte Tasten ungültig" +232 "vi: temporärer Puffer nicht freigegeben" 233 "Dieses Terminal hat keine %s Taste" 234 "es kann nur ein Puffer angegeben werden" -235 "Zahl groesser als %lu" +235 "Zahl größer als %lu" 236 "Unterbrochen" -237 "Nicht moeglich temporaere Datei anzulegen" -238 "Warnung: %s ist keine regulaere Datei" -239 "%s ist bereits gesperrt, nur-lese Editorsitzung" -240 "%s: loeschen" -241 "%s: schliessen" -242 "%s: loeschen" -243 "%s: loeschen" -244 "Nur-lese Datei, nicht geschrieben; verwende ! zum Ueberschreiben" -245 "Nur-lese Datei, nicht geschrieben" -246 "%s existiert, nicht geschrieben; verwende ! zum Ueberschreiben" +237 "Nicht möglich, temporäre Datei anzulegen" +238 "Warnung: %s ist keine reguläre Datei" +239 "%s ist bereits gelockt, Editorsitzung schreibgeschützt" +240 "%s: löschen" +241 "%s: schließen" +242 "%s: löschen" +243 "%s: löschen" +244 "Datei nicht schreibbar, nicht geschrieben; verwende ! zum Überschreiben" +245 "Datei nicht schreibbar, nicht geschrieben" +246 "%s existiert, nicht geschrieben; verwende ! zum Überschreiben" 247 "%s existiert, nicht geschrieben" -248 "Teil der Datei, nicht geschrieben; verwende ! zum Ueberschreiben" +248 "Teil der Datei, nicht geschrieben; verwende ! zum Überschreiben" 249 "Teil der Datei, nicht geschrieben" -250 "%s: Datei wurde spaeter als diese Kopie veraendert; verwende ! zum Ueberschreiben" -251 "%s: Datei wurde spaeter als diese Kopie veraendert" -252 "%s: Schreibsperrung war nicht moeglich" +250 "%s: Datei wurde später als diese Kopie verändert; verwende ! zum Überschreiben" +251 "%s: Datei wurde später als diese Kopie verändert" +252 "%s: Locken zum Schreiben war nicht möglich" 253 "schreibe ..." 254 "%s: WARNUNG: DATEI ABGESCHNITTEN" 255 "Bereits am ersten 'tag' dieser Gruppe" 256 "%s: neue Datei: %lu Zeilen, %lu Zeichen" 257 "%s: %lu Zeilen, %lu Zeichen" 258 "%s wurde in zu viele Dateinamen expandiert" -259 "%s: keine regulaere Datei" -260 "%s: gehoehrt nicht Ihnen" -261 "%s: anderer Benutzer als Eigentuemer hat Zugriff" -262 "Datei wurde seit dem letzten vollstaendigen Schreiben geaendert; schreibe oder verwende ! zum ignorieren" -263 "Datei wurde seit dem letzten vollstaendigen Schreiben geaendert; schreibe oder verwende :edit! zum ignorieren" -264 "Datei wurde seit dem letzten vollstaendigen Schreiben geaendert; schreibe oder verwende ! zum ignorieren" -265 "Datei ist temporaer; beim Verlassen gehen die Aenderungen verloren" -266 "Nur-lese Datei, Aenderungen werden nicht automatisch geschrieben" +259 "%s: keine reguläre Datei" +260 "%s: gehört nicht Ihnen" +261 "%s: anderer Benutzer als Eigentümer hat Zugriff" +262 "Datei wurde seit dem letzten vollständigen Schreiben geändert; schreibe oder verwende ! zum ignorieren" +263 "Datei wurde seit dem letzten vollständigen Schreiben geändert; schreibe oder verwende :edit! zum ignorieren" +264 "Datei wurde seit dem letzten vollständigen Schreiben geändert; schreibe oder verwende ! zum ignorieren" +265 "Datei ist temporär; beim Verlassen gehen die Änderungen verloren" +266 "Datei ist schreibgeschützt, Änderungen werden nicht automatisch geschrieben" 267 "Portokollierung neu begonnen" -268 "bestaetigen [ynq]" -269 "Druecke beliebige Taste um fortzufahren" -270 "Druecke beliebige Taste um fortzufahren [: um weitere Kommandos einzugeben]: " -271 "Druecke beliebige Taste um fortzufahren [q zum Verlassen]: " -272 "Diese Form von %s benoetigt das ex Terminal-Interface" +268 "bestätigen [ynq]" +269 "Drücke beliebige Taste um fortzufahren" +270 "Drücke beliebige Taste um fortzufahren [: um weitere Kommandos einzugeben]: " +271 "Drücke beliebige Taste um fortzufahren [q zum Verlassen]: " +272 "Diese Form von %s benötigt das ex Terminal-Interface" 273 "Gehe in ex Eingabe-Modus.\n" -274 "Kommando schief gelaufen, noch keine Datei eingelesen" +274 "Kommando schiefgelaufen, noch keine Datei eingelesen" 275 " weiter?" 276 "unerwartetes Zeichen - Ereignis" 277 "unerwartetes Dateiende - Ereignis" @@ -271,18 +270,18 @@ 280 "unerwartetes Verlassen - Ereignis" 281 "unerwartetes Wiederherstellungs - Ereignis" 282 "Bereits am letzten 'tag' dieser Gruppe" -283 "Das %s Kommando benoetigt das ex Terminal-Interface" -284 "Diese Form von %s wird nicht unterstuetzt wenn die 'secure edit' - Option gesetzt ist" +283 "Das %s Kommando benötigt das ex Terminal-Interface" +284 "Diese Form von %s wird nicht unterstützt wenn die 'secure edit' - Option gesetzt ist" 285 "unerwartetes Zeichenketten - Ereignis" 286 "unerwartetes timeout - Ereignis" 287 "unerwartetes Schreibe - Ereignis" -289 "Shell Expandierungen nicht unterstuetzt wenn die 'secure edit' - Option gesetzt ist" -290 "Das %s Kommando wird nicht unterstuetzt wenn die 'secure edit' - Option gesetzt ist" +289 "Shell Expandierungen nicht unterstützt wenn die 'secure edit' - Option gesetzt ist" +290 "Das %s Kommando wird nicht unterstützt wenn die 'secure edit' - Option gesetzt ist" 291 "set: %s kann nicht ausgeschaltet werden" 292 "Anzeige zu klein." -293 "angefuegt" -294 "geaendert" -295 "geloescht" +293 "angefügt" +294 "geändert" +295 "gelöscht" 296 "verbunden" 297 "verschoben" 298 "geschoben" @@ -290,18 +289,18 @@ 300 "Zeile" 301 "Zeilen" 302 "Vi wurde nicht mit dem Tcl Interpreter gelinkt" -303 "Datei wurde seit dem letzten Schreiben veraendert." -304 "Shell Expansion nicht geklappt" -305 "Es ist keine %s Edieroption angegeben" +303 "Datei wurde seit dem letzten Schreiben verändert." +304 "Shell Expansion hat nicht geklappt" +305 "Es ist keine %s Editieroption angegeben" 306 "Vi wurde nicht mit einem Perl Interpreter geladen" -307 "Kein ex Kommando auszufuehren" -308 "Druecke <CR> um ein Kommando auszufuehren, :q zum verlassen" -309 "Verwende "cscope help" fuer Hilestellung" +307 "Kein ex Kommando auszuführen" +308 "Drücke <CR> um ein Kommando auszuführen, :q zum verlassen" +309 "Verwende \"cscope help\" für Hilestellung" 310 "Keine cscope Verbindung aktiv" 311 "%s: unbekannter Suchtyp: verwende einen aus %s" 312 "%d: keine solche cscope Verbindung" 313 "set: die %s Option kann nicht eingeschaltet werden" 314 "set: die %s Option kann nicht auf 0 gesetzt werden" -315 "%s: angefuegt: %lu Zeilen, %lu Zeichen" -316 "unerwartetes Groessenveraenderungs - Ereignis" +315 "%s: angefügt: %lu Zeilen, %lu Zeichen" +316 "unerwartetes Größenveränderungs - Ereignis" 317 "%d Dateien zu edieren" diff --git a/catalog/german.check b/catalog/german.check deleted file mode 100644 index 4fd60c14e63b..000000000000 --- a/catalog/german.check +++ /dev/null @@ -1,36 +0,0 @@ -Unused message id's (this is okay): -001 -047 -050 -051 -052 -081 -176 -213 -229 -288 -========================= -MISSING ERROR MESSAGES (Please add!): -========================= -Extra error messages (just delete them): -========================= -MESSAGES WITH THE SAME MESSAGE ID's (FIX!): -========================= -Duplicate messages, both id and message (this is okay): -========================= -Duplicate messages, just message (this is okay): - 2 %s existiert, nicht geschrieben; verwende ! zum UeberschreibenX - 2 %s wurde in zu viele Dateinamen expandiertX - 2 %s: %lu Zeilen, %lu ZeichenX - 2 %s: Wiederherstellungsdatei hat falsches FormatX - 2 Aenderungen nicht wiederherstellbar falls die Editorsitzung schief gehtX - 2 Kein altes SuchmusterX - 2 Keine Protokollierung aktiv, rueckgaengig machen nicht moeglichX - 2 Puffer %s ist leerX - 2 geaendertX - 2 kopiere Datei fuer Wiederherstellung ...X - 2 set: %s ist keine boolsche OptionX - 3 %s: loeschenX - 3 Datei wurde seit dem letzten vollstaendigen Schreiben geaendert; schreibe oder verwende ! zum ignorierenX - 4 Benutzung: %sX -========================= diff --git a/catalog/german.owner b/catalog/german.owner index e72e8ae268fc..efed56a0a76f 100644 --- a/catalog/german.owner +++ b/catalog/german.owner @@ -1 +1,2 @@ -Bernhard Daeubler <daeb@physik.uni-ulm.de> +Bernhard Daeubler <daeb@physik.uni-ulm.de> +Joerg Wunsch <joerg_wunsch@uriah.heep.sax.de> diff --git a/catalog/polish.base b/catalog/polish.base new file mode 100644 index 000000000000..74b2756934a0 --- /dev/null +++ b/catalog/polish.base @@ -0,0 +1,306 @@ +002 "Zbyt d³uga linia" +003 "nie mo¿na usun±æ linii %lu" +004 "nie mo¿na dodaæ do linii %lu" +005 "nie mo¿na wstawiæ w linii %lu" +006 "nie mo¿na zachowaæ linii %lu" +007 "nie mo¿na pobraæ ostatniej linii" +008 "B³±d: nie mo¿na pobraæ linii %lu" +009 "Plik logu" +010 "Brak logowania, anulowanie (undo) niemo¿liwe" +011 "Brak zmian do anulowania" +012 "Brak logowania, anulowanie (undo) niemo¿liwe" +013 "Brak logowania, nie mo¿na przegl±daæ do przodu" +014 "Brak zmian do powtórzenia" +015 "%s/%d: b³±d zapisu do logu" +016 "Standardowe wej¶cie i wyj¶cie vi musi byæ terminalem" +017 "Znacznik %s: nie ustawiony" +018 "Znacznik %s: linia zosta³a usuniêta" +019 "Znacznik %s: pozycja kursora ju¿ nie istnieje" +020 "B³±d: " +021 "nowy plik" +022 "nazwa zosta³a zmieniona" +023 "zmieniony" +024 "nie zmieniony" +025 "ODBLOKOWANY" +026 "tylko do odczytu" +027 "linia %lu z %lu [%ld%%]" +028 "pusty plik" +029 "linia %lu" +030 "Plik %s nie jest katalogiem komunikatów" +031 "Nie mo¿na ustawiæ domy¶lnej opcji %s" +032 "Sposób u¿ycia: %s" +033 "set: brak opcji %s: 'set all' wy¶wietla warto¶ci opcji" +034 "set: opcja no]%s nie pobiera warto¶ci" +035 "set: opcja %s nie jest zmienn± boolowsk±" +036 "set: opcja %s: %s" +037 "set: opcja %s: %s: przepe³nienie" +038 "set: opcja %s: %s nie jest poprawn± liczb±" +039 "set: opcja %s nie jest zmienn± boolowsk±" +040 "Zbyt ma³a liczba kolumn ekranu, mniejsza ni¿ %d" +041 "Zbyt du¿a liczba kolumn, wiêksza ni¿ %d" +042 "Zbyt ma³a liczba wierszy ekranu, mniejsza ni¿ %d" +043 "Zbyt du¿a liczba wierszy ekranu, wiêksza ni¿ %d" +044 "Opcja lisp nie jest zaimplementowana" +045 "komunikaty nie wy³±czone: %s" +046 "komunikaty nie w³±czone: %s" +047 "Opcja %s musi sk³adaæ siê z dwóch grup symboli" +053 "Domy¶lny bufor jest pusty" +054 "Bufor %s jest pusty" +055 "Pliki z symbolem nowego wiersza w nazwie nie mog± byæ odtworzone" +056 "Zmiany nie do odtworzenia, je¶li sesja zostanie przerwana" +057 "Tworzenie kopii zapasowej..." +058 "B³±d podczas zachowywania: %s" +059 "Zmiany nie do odtworzenia, je¶li sesja zostanie przerwana" +060 "B³±d podczas tworzenia kopii zapasowej: %s" +061 "Tworzenie kopii zapasowej..." +062 "Nie znaleziono informacji o u¿ytkowniku numer %u" +063 "Nie mo¿na zablokowaæ kopii zapasowej" +064 "Przepe³nienie bufora kopii zapasowej" +065 "Kopia zapasowa" +066 "%s: b³êdna kopia zapasowa" +067 "%s: b³êdna kopia zapasowa" +068 "Brak plików o nazwie %s, które móg³by¶ odczytaæ, do odzyskania" +069 "Istniej± starsze wersje tego pliku, które mo¿na odzyskaæ" +070 "Istniej± inne pliki, które mo¿na odzyskaæ" +071 "nie wysy³am poczty: %s" +072 "Pusty plik; nie ma czego szukaæ" +073 "Dotarto do koñca pliku bez znalezienia szukanego wzorca" +074 "Brak poprzedniego wzorca poszukiwañ" +075 "Nie znaleziono wzorca" +076 "Dotarto do pocz±tku pliku bez znalezienia szukanego wzorca" +077 "Poszukiwanie od pocz±tku" +078 "Szukam..." +079 "Nie znaleziono niedrukowalnych znaków" +080 "Nieznana nazwa polecenia" +082 "%s: polecenie niedostêpne w trybie edytora ex" +083 "Liczba nie mo¿e byæ zerem" +084 "%s: b³êdny numer linii" +085 "Wewnêtrzny b³±d tablicy sk³adni (%s: %s)" +086 "Sposób u¿ycia: %s" +087 "%s: tymczasowy bufor nie zosta³ zwolniony" +088 "Przesuniêcie przed liniê 1" +089 "Przesuniêcie poza koniec pliku" +090 "@ with range running when the file/screen changed" +091 "Wykonywano polecenie globalne/wizualne podczas zmiany pliku/ekranu" +092 "B³±d polecenie ex: pozosta³e polecenia anulowane" +093 "B³±d polecenia ex: mapowanie klawiszy anulowane" +094 "Drugi adres jest mniejszy od pierwszego" +095 "Nie podano nazwy znacznika" +096 "\\ bez / lub ?" +097 "Odniesienie do linii o numerze mniejszym od 0" +098 "Nieznane polecenie %s" +099 "Przepe³nienie warto¶ci adresu" +100 "Niedomiar warto¶ci adresu" +101 "Niedozwolona kombinacja adresu" +102 "Niedozwolony adres: jest tylko %lu linii w pliku" +103 "Niedozwolony adres: plik jest pusty" +104 "Polecenie %s nie zezwala na u¿ycie adresu 0" +105 "Brak skrótów do wy¶wietlenia" +106 "Skróty musz± siê koñczyæ symbolem \"s³owo\"" +107 "Skróty nie mog± zawieraæ spacji lub tabulacji" +108 "Skróty nie mog± przeplataæ symboli s³owo/nie-s³owo, z wyj±tkiem na koñcu linii" +109 "\"%s\" nie jest skrótem" +110 "B³±d polecenia vi: mapowanie klawiszy odrzucone" +111 "Nie ma wiêcej plików do edycji" +112 "Nie ma poprzednich plików do edycji" +113 "Nie ma poprzednich plików do przewiniêcia wstecz" +114 "Nie ma listy plików do wy¶wietlenia" +115 "Nie ma poprzedniego polecenia do zast±pienia \"!\"" +116 "Nie ma nazwy pliku do zast±pienia %%" +117 "Nie ma nazwy pliku do zast±pienia #" +118 "B³±d: execl: %s" +119 "B³±d I/O: %s" +120 "Plik zmodyfikowany od ostatniego zapisu; zapisz lub u¿yj ! ¿eby wymusiæ" +121 "Nie mozna znale¼æ katalogu domowego (home)" +122 "Nowy katalog bie¿±cy: %s" +123 "Nie ma buforów edycji do wy¶wietlenia" +124 "Polecenie %s nie mo¿e byæ u¿yte jako czê¶æ polecenia globalnego lub wizualnego" +125 "%s/%s: nie wczytany: nie nale¿y do ciebie ani do roota" +126 "%s/%s: nie wczytany: nie nale¿y do ciebie" +127 "%s/%s: nie wczytany: inny u¿ytkownik ni¿ w³a¶ciciel ma prawo do zapisu" +128 "%s: nie wczytany: nie nale¿y do ciebie ani do roota" +129 "%s: nie wczytany: nie nale¿y do ciebie" +130 "%s: nie wczytany: inny uzytkownik ni¿ w³a¶ciciel ma prawo do zapisu" +131 "Brak kolejnych linii do po³±czenia" +132 "Brak pozycji map wej¶ciowych" +133 "Brak pozycji map poleceñ" +134 "Znak %s nie mo¿e byæ przemapowany" +135 "\"%s\" obecnie nie jest mapowany" +136 "Nazwa znacznika musi byæ pojedyñcz± liter±" +137 "%s istnieje, nie zapisany; u¿yj ! ¿eby wymusiæ" +138 "Nowy plik exrc: %s" +139 "Linia docelowa jest wewn±trz przenoszonego obszaru" +140 "Polecenie open wymaga ustawienia opcji open" +141 "Polecenie open jest niezaimplementowane" +142 "Niemo¿liwe jest zachowanie tego pliku" +143 "Plik zachowany" +144 "%s: rozwija siê na zbyt wiele nazw plików" +145 "Tylko zwyk³e pliki i nazwane ³±cza (named pipes) mo¿na czytaæ" +146 "%s: nie mo¿na za³o¿yæ blokady do odczytu" +147 "Czytanie..." +148 "%s: %lu linii, %lu znaków" +149 "Brak ekranów w tle do wy¶wietlenia" +150 "Polecenie script dostêpne jest tylko w trybie vi" +151 "Brak polecenia do wykonania" +152 "Opcja shiftwidth ustawiona na 0" +153 "Przepe³nienie licznika" +154 "Niedomiar licznika" +155 "Podano wyra¿enie regularne; flaga r nie ma znaczenia" +156 "Flagi #, l oraz p nie mog± byæ ³±czone z flag± c w trybie vi" +157 "Nie znaleziono wzorca" +158 "Brak poprzedniego znacznika" +159 "Mniej ni¿ %s na stosie znaczników; u¿yj :display t[ags]" +160 "Brak pliku %s na stosie znaczników do powrotu; u¿yj :display t[ags]" +161 "Naci¶nij Enter: " +162 "%s: znacznik nie znaleziony" +163 "%s: b³êdny znacznik w %s" +164 "%s: numer linii znacznika wykracza poza koniec pliku" +165 "Stos znaczników jest pusty" +166 "%s: nie znaleziono szukanego wzorca" +167 "%d plików jeszcze do edycji" +168 "Bufor %s jest pusty" +169 "Potwierdzasz zmianê? [n]" +170 "Przerwany" +171 "Brak poprzedniego bufora do wykonania" +172 "Brak poprzedniego wyra¿enia regularnego" +173 "Polecenie %s wymaga uprzedniego wczytania pliku" +174 "Sposób u¿ycia: %s" +175 "Polecenie wizualne wymaga ustawienia opcji open" +177 "Pusty plik" +178 "Brak poprzedniego szukania F, f, T lub t" +179 "%s nie znaleziono" +180 "Brak poprzedniego pliku do edycji" +181 "Kursor nie na liczbie" +182 "Liczba wynikowa zbyt du¿a" +183 "Liczba wynikowa zbyt ma³a" +184 "Brak pasuj±cych znaków w tej linii" +185 "Nie znaleziono pasuj±cych znaków" +186 "Brak znaków do zamiany" +187 "Brak innego ekranu do prze³±czenia" +188 "Znaki poza napisem do szukania, przesuniêciem linii i/lub poleceniem z" +189 "Brak poprzedniego wzorca szukania" +190 "Szukanie wróci³o do pierwotnej pozycji" +191 "Skrót przekroczy³ limit rozwiniêcia: czê¶æ znaków odrzucono" +192 "Niedozwolony znak; zacytuj, ¿eby wprowadziæ" +193 "Ju¿ na pocz±tku wstawiania" +194 "Brak kolejnych znaków do usuniêcia" +195 "Przesuniêcie poza koniec pliku" +196 "Przesuniêcie poza koniec linii" +197 "Nie wykonano przesuniêcia kursora" +198 "Ju¿ na pocz±tku pliku" +199 "Przesuniêcie przed pocz±tek pliku" +200 "Ju¿ w pierwszej kolumnie" +201 "Nale¿y podaæ bufory przed poleceniem" +202 "Ju¿ na koñcu pliku" +203 "Ju¿ na koñcu linii" +204 "%s nie jest poleceniem vi" +205 "Sposób u¿ycia: %s" +206 "Brak znaków do usuniêcia" +207 "Polecenie Q wymaga interfejsu terminala ex" +208 "Brak polecenia do powtórzenia" +209 "Plik jest pusty" +210 "%s nie mo¿e byæ u¿yte jako polecenie przesuniêcia" +211 "Ju¿ w trybie poleceñ" +212 "Kursor nie na s³owie" +214 "Warto¶ci opcji okna zbyt du¿e, max to %u" +215 "Do³±cz" +216 "Zmieñ" +217 "Polecenie" +218 "Wstaw" +219 "Zamieñ" +220 "Przesuniêcie poza koniec ekranu" +221 "Przesuniêcie przed pocz±tek ekranu" +222 "Ekran musi mieæ wiêcej ni¿ %d linii, ¿eby go podzieliæ" +223 "Brak ekranów w tle" +224 "Nie ma ekranu w tle z edycj± pliku o nazwie %s" +225 "Nie mo¿na schowaæ w tle jedynego ekranu edycyjnego" +226 "Mo¿na zmniejszyæ ekran tylko do %d wierszy" +227 "Ekran nie mo¿e byæ zmniejszony" +228 "Ekran nie mo¿e byæ zwiêkszony" +230 "Ekran nie mo¿e byæ zawieszony" +231 "Przerwano: odrzucono mapowane klawisze" +232 "vi: nie zwolniono bufora tymczasowego" +233 "Ten terminal nie posiada klawisza %s" +234 "Mo¿na podaæ tylko jeden bufor" +235 "Liczba wiêksza ni¿ %lu" +236 "Przerwano" +237 "Nie mo¿na utworzyæ pliku tymczasowego" +238 "Uwaga: %s nie jest zwyk³ym plikiem" +239 "%s ju¿ zablokowany, sesja tylko do odczytu" +240 "%s: usuñ" +241 "%s: zamknij" +242 "%s: usuñ" +243 "%s: usuñ" +244 "Plik tylko do odczytu, nie zapisany; u¿yj ! ¿eby wymusiæ" +245 "Plik tylko do odczytu, nie zapisany" +246 "%s istnieje, nie zapisany; u¿yj ! ¿eby wymusiæ" +247 "%s istnieje, nie zapisany" +248 "Plik czê¶ciowy, nie zapisany; u¿yj ! ¿eby wymusiæ" +249 "Plik czê¶ciowy, nie zapisany" +250 "%s: plik zmodyfikowany pó¼niej, ni¿ ta kopia; u¿yj ! ¿eby wymusiæ" +251 "%s: plik zmodyfikowany pó¼niej, ni¿ ta kopia" +252 "%s: nie mo¿na zablokowaæ do pisania" +253 "Zapisywanie..." +254 "%s: OSTRZE¯ENIE: PLIK ZOSTA£ OBCIÊTY" +255 "Ju¿ przy pierwszym znaczniku z tej grupy" +256 "%s: nowy plik: %lu linii, %lu znaków" +257 "%s: %lu linii, %lu znaków" +258 "%s rozwija siê na zbyt wiele nazw plików" +259 "%s: nie jest zwyk³ym plikiem" +260 "%s: nie jeste¶ w³a¶cicielem" +261 "%s: dostêpny dla u¿ytkownika innego ni¿ w³a¶ciciel" +262 "Plik zmodyfikowany od ostatniego zapisu; zapisz lub u¿yj ! ¿eby wymusiæ" +263 "Plik zmodyfikowany od ostatniego zapisu; zapisz lub u¿yj :edit! ¿eby wymusiæ" +264 "Plik zmodyfikowany od ostatniego zapisu; zapisz lub u¿yj ! ¿eby wymusiæ" +265 "To jest plik tymczasowy; wyj¶cie anuluje zmiany" +266 "Plik tylko do odczytu, nie ma autozapisu zmian" +267 "Ponownie rozpoczêto logowanie" +268 "potwierdzasz? [ynq]" +269 "Naci¶nij dowolny klawisz: " +270 "Naci¶nij dowolny klawisz [: ¿eby podaæ nastêpne polecenia ex]: " +271 "Naci¶nij dowolny klawisz [q ¿eby zakoñczyæ]: " +272 "Ta forma %s wymaga interfejsu terminala ex" +273 "Wchodzê w tryb wprowadzania ex." +274 "B³±d polecenia, jeszcze nie wczytano pliku." +275 " dalej?" +276 "Nieoczekiwany symbol" +277 "Nieoczekiwany koniec pliku" +278 "Brak wzorców pasuj±cych do zapytania" +279 "Nieoczekiwane przerwanie" +280 "Nieoczekiwane polecenie koniec" +281 "Nieoczekiwane polecenie od¶wie¿enia" +282 "Ju¿ przy ostatnim znaczniku z tej grupy" +283 "Polecenie %s wymaga interfejsu terminala ex" +284 "Ta forma %s jest niedostêpna, kiedy ustawiona jest opcja bezpiecznej edycji" +285 "Nieoczekiwany ci±g znaków" +286 "Nieoczekiwany timeout" +287 "Nieoczekiwane polecenie zapisu" +289 "Rozwiniêcia shella niedostêpne w trybie bezpiecznej edycji" +290 "Polecenie %s jest niedostêpne w trybie bezpiecznej edycji" +291 "set: opcji %s nie mo¿na wy³±czyæ" +292 "Ekran zbyt ma³y." +293 "dodano" +294 "zmieniono" +295 "usuniêto" +296 "po³±czono" +297 "przeniesiono" +298 "przesuniêto" +299 "wczytano" +300 "linia" +301 "linii" +302 "Vi nie zosta³ uruchomiony z interpreterem Tcl" +303 "Plik zmodyfikowany od ostatniego zapisu" +304 "B³±d rozwiniêcia shella" +305 "Brak opcji %s edycji" +306 "Vi nie zosta³ uruchomiony z interpreterem Perl" +307 "Brak polecenia ex do wykonania" +308 "Naci¶nij <CR> ¿eby wykonac polecenie, :q ¿eby wyj¶æ" +309 "U¿yj \"cscope help\" w celu uzyskania pomocy" +310 "Brak aktywnych po³±czeñ cscope" +311 "%s: nieznany typ poszukiwañ: u¿yj jednego z %s" +312 "%d: brak takiej sesji cscope" +313 "set: nie mo¿na nigdy w³±czyæ opcji %s" +314 "set: opcja %s nie mo¿e nigdy mieæ warto¶ci 0" +315 "%s: dodano: %lu linii, %lu znaków" +316 "Nieoczekiwane polecenie zmiany rozmiaru" +317 "%d plików do edycji" diff --git a/catalog/polish.owner b/catalog/polish.owner new file mode 100644 index 000000000000..1fcf5c545810 --- /dev/null +++ b/catalog/polish.owner @@ -0,0 +1 @@ +Andrzej Bia³ecki <abial@warman.org.pl> diff --git a/catalog/ru_RU.KOI8-R b/catalog/ru_RU.KOI8-R deleted file mode 100644 index 7eb35b9cf262..000000000000 --- a/catalog/ru_RU.KOI8-R +++ /dev/null @@ -1,267 +0,0 @@ -VI_MESSAGE_CATALOG -pEREPOLNENIE ZNA^ENIQ DLINY STROKIX -%s/%d: NEWOZMOVNO UDALITX STROKU %uX -%s/%d: NEWOZMOVNO DOBAWITX K STROKE %uX -%s/%d: NEWOZMOVNO WSTAWITX W STROKU %uX -%s/%d: NEWOZMOVNO SOHRANITX STROKU %uX -%s/%d: NEWOZMOVNO DOSTATX POSLEDN@@ STROKUX - -fAJL ZAPISEJX -zAPISI NE WELISX, NEWOZMOVNO OTMENITX POSLEDN@@ KOMANDUX -nET IZMENENIJ DLQ OTMENYX -zAPISI NE WELISX, NEWOZMOVNO OTMENITX POSLEDN@@ KOMANDUX -zAPISI NE WELISX, NEWOZMOVNO PROSMOTRETX WPEREDX -nET IZMENENIJ DLQ PEREDELKIX -%s/%d: O[IBKA PRI ZAPISI PROTOKOLAX -sTANDARTNYJ WWOD/WYWOD DLQ VI DOLVEN BYTX TERMINALX -oTMETKA %s: NE USTANOWLENAX -oTMETKA %s: STROKA BYLA UDALENAX -oTMETKA %s: POZICII KURSORA BOLX[E NE SU]ESTWUETX -o[IBKA:X - - - - - - - - - -fAJL %s NE QWLQETSQ KATALOGOM SOOB]ENIJX -nEWOZMOVNO USTANOWITX OPCI@ %s PO UMOL^ANI@X -iSPOLXZOWANIE: %sX -oPCII %s NET: 'set all' POKAZYWAET WSE WOZMOVNYE OPCIIX -set: [no]%s NE PRINIMAET TAKOGO ZNA^ENIQX -set: %s OPCIQ NE QWLQETSQ DWOI^NOJX - - -set: NEPRAWILXNOE ZNA^ENIE %sX -set: %s OPCIQ NE QWLQETSQ DWOI^NOJX -kOLI^ESTWO KOLONOK \KRANA SLI[KOM MALO, MENX[E ^EM %dX -kOLI^ESTWO KOLONOK \KRANA SLI[KOM WELIKO, BOLX[E ^EM %dX -kOLI^ESTWO STROK \KRANA SLI[KOM MALO, MENX[E ^EM %dX -kOLI^ESTWO STROK \KRANA SLI[KOM WELIKO, BOLX[E ^EM %dX -oPCIQ lisp OTSUTSTWUETX -sOOB]ENIQ NE WYKL@^ENY: %sX -sOOB]ENIQ NE WKL@^ENY: %sX -oPCIQ modeline(s) NE MOVET BYTX PEREUSTANOWLENAX -oPCIQ paragraph DOLVNA SOSTOQTX IZ GRUPP S DWUMQ SIMWOLAMIX -oPCIQ section DOLVNA SOSTOQTX IZ GRUPP S DWUMQ SIMWOLAMIX -oPCIQ shiftwidth NE MOVET BYTX USTANOWLENA NA 0X -oPCIQ sourceany NE MOVET BYTX USTANOWLENAX -tABULQCIQ NE MOVET BYTX USTANOWLENA NA 0X -sTARTOWYJ BUFER PUSTX -bUFER %s PUSTX -fAJLY S SIMWOLAMI PEREWODA STROKI W IMENI NE MOGUT BYTX WOSSTANOWLENYX -iZMENENIQ NE SOHRANENY PRI KRAHE SESSIIX - -sOHRANENIE NE UDALOSX: %sX -iZMENENIQ NE SOHRANQ@TSQ PRI OBRYWE SESSIIX -sOHRANENIE KOPII FAJLA NE UDALOSX: %sX - -iNFORMACII NA POLXZOWATELQ %u NE NAJDENOX -nEWOZMOVNO ZA]ITITX SPASENNYJ FAJLX -bUFER WOSSTANOWLENNOGO FAJLA PEREPOLNENX -wOSSTANOWLENNYJ FAJLX -%s: NE DO KONCA WOSSTANOWLENNYJ FAJLX -%s: NE DO KONCA WOSSTANOWLENNYJ FAJLX -fAJLOW S IMENEM %s, KOTORYE wY MOVETE ^ITATX, NE SU]ESTWUETX -eSTX STARYE WERSII FAJLA, KOTORYE MOVNO WOSSTANOWITXX -sU]ESTWU@T DRUGIE FAJLY, KOTORYE MOVNO WOSSTANOWITXX -E-mail NE POSLAN: %sX -fAJL PUST - ISKATX NE^EGOX -dOSTIGNUT KONEC FAJLA BEZ NAHOVDENIQ OBRAZCA POISKAX -nE ZADAN OBRAZEC POISKAX -oBRAZEC POISKA NE NAJDENX -dOSTUPNO NA^ALO FAJLA BEZ NAHOVDENIQ OBRAZCA POISKAX -pOISK ZACIKLENX - -nEPE^ATNYH SIMWOLOW NE NAJDENOX -nEIZWESTNAQ KOMANDAX - -kOMANDA NE DOSTUPNA W REVIME exX -s^ET^IK NE MOVET BYTX NULEMX -%s: NEPRAWILXNOE UKAZANIE STROKIX -wNUTRENNQQ O[IBKA W SINTAKSISE (%s: %s)X -iSPOLXZOWANIE: %sX -%s: WREMENNYJ BUFER NE ISPOLXZOWANX -mETKA POSTAWLENA PERED STROKOJ 1X -mETKA POSTAWLENA POSLE KONCA FAJLAX - - -kOMANDA ex NE UDALASX: PARAMETRY KOMANDY ZABYTYX - -wTOROJ ADRES MENX[E ^EM PERWYJX -nE UKAZANO NAZWANIE OTMETKIX -\\ NE ZAWER[AETSQ / ILI ?X -sSYLKA K STROKE S NOMEROM MENX[E 0X -kOMANDA %s NEIZWESTNAX -pEREPOLNENIE ZNA^ENIQ ADRESAX -nEDOBOR ZNA^ENIQ ADRESAX -nEDOPUSTIMAQ KOMBINACIQ W ADRESEX -nEPRAWILXNYJ ADRES: WSEGO %lu STROK W FAJLEX -nEPRAWILXNYJ ADRES: FAJL PUSTX -kOMMANDA %s NE MOVET ISPOLXZOWATX ADRES 0X -aBBREWIATURY OTSUTSTWU@TX -aBBREWIATURY DOLVNY ZAKAN^IWATXSQ SIMWOLOM "word"X -aBBREWIATURY NE MOGUT SODERVATX SIMWOLOY TABLQCII ILI PROBELYX -aBBREWIATURY NE MOGUT SO^ETATXSQ S SIMWOLAMI SLOW/NE-SLOW, ZA ISKL@^ENIEM KONCA STROKIX -"%s" NE QWLQETSQ ABBREWIATUROJX - -fAJLOW DLQ REDAKTIROWANIQ BOLX[E NETX -oTSUTSTWIE PREDYDU]EGO FAJLA DLQ REDAKTIROWANIQX -oTSUTSTWIE PREDYDU]EGO FAJLA DLQ PROSMOTRA NAZADX -nET FAJLOWX -oTSUTSTWIE PREDYDU]EJ KOMANDY DLQ ZAMENY "!"X -oTSUTSTWIE ZAMENY DLQ %%X -oTSUTSTWIE ZAMENY DLQ #X -o[IBKA: execl: %sX -o[IBKA WWODA/WYWODA: %sX -fAJL IZMENEN S MOMENTA POSLEDNEJ POLNOJ ZAPISI: ISPOLXZUJTE ! DLQ OBHODAX -nEWOZMOVNO NAJTI DOMA[NIJ KATALOGX -nOWYJ KATALOG: %sX -nET WYREZANYH BUFEROWX -kOMANDA %s NE MOVET BYTX ISPOLXZOWANA WNUTRI OB]EJ KOMANDYX -%s/%s: NE OTKRYT: NE PRINADLEVIT wAM ILI root-UX -%s/%s: NE OTKRYT: NE PRINADLEVIT wAMX -%s/%s: NE OTKRYT: WOZMOVNOSTX ZAPISI U POLXZOWATELQ, NE QWLQ@]EGOSQ WLADELXCEMX -%s/%s: NE S^ITAN: NE PRINADLEVIT wAM ILI root-UX -%s/%s: NE S^ITAN: NE PRINADLEVIT wAMX -%s/%s: NE S^ITAN: WOZMOVNOSTX ZAPISI U POLXZOWATELQ, NE QWLQ@]EGOSQ WLADELXCEMX -pOSLEDU@]IE STROKI OTSUTSTWU@TX -oTSUTSTWIE PARAMETROW WWODAX -oTSUTSTWIE PARAMETROW KOMANDYX -sIMWOL %s NE MOVET BYTX PEREZAPOMNENX -"%s" NA DANNYJ MOMENT NE OTME^ENX -iMQ METKI DOLVNO BYTX ODNIM SIMWOLOMX -%s SU]ESTWUET, NE ZAPISAN; ISPOLXZUJTE ! DLQ OBHODAX -nOWYJ FAJL .exrc: %sX -sTROKA PERENOSA NAHODITSQ WNUTRI PARAMETROW PERENOSAX -kOMANDA open PODRAZUMEWAET USTANOWKU OPCII openX -kOMANDA open NE REALIZOWANAX -zA]ITA FAJLA NEWOZMOVNAX -fAJL ZA]I]ENX -%s RAS[IRILSQ W SLI[KOM BOLX[OE KOLI^ESTWO IMEN FAJLOWX - -%s: ZA]ITA NA ^TENIE BYLA NEDOSTUPNAX - -%s: %lu STROK, %lu SIMWOLOWX -nET TENEWYH OKONX -kOMANDA script ISPOLXZUETSQ TOLXKO W REVIME viX -nET KOMANDY DLQ ISPOLNENIQX -oPCIQ shiftwidth USTANOWLENA NA 0X -pEREPOLNENIE S^ET^IKAX -cIKL WYPOLNEN NE DO KONCAX -uKAZANO REGULQRNOE WYRAVENIE: FLAG r NE NUVENX -fLAGI #, l I p NE MOGUT BYTX OB_EDINENY S FLAGOM c W REVIME viX -sOWPADENIJ NETX -mETKA OTSUTSTWUETX -w STEKE METOK ZAPISEJ MENX[E, ^EM %s, ISPOLXZUJTE :display t[ags]X -fAJLA S IMENEM %s W STEKE METOK NET; ISPOLXZUJTE :display t[ags]X - -%s: METKA NE NAJDENAX -%s: PLOHAQ METKA W %sX - -sTEK METOK PUSTX -%s: ISKOMAQ PEREMENNAQ NE NAJDENAX - -bUFER %s PUSTX - -pRERWANOX -oTSUTSTWIE BUFERA DLQ ISPOLXZOWANIQX -nET PREDIDU]EGO REGULQRNOGO WYRAVENIQX -kOMANDA %s PODRAZUMEWAET NALI^IE PRO^TENNOGO FAJLAX -iSPOLXZOWANIE: %sX -kOMANDA visual PODRAZUMEWAET OBQZATELXNU@ USTANOWKU OPCII openX -%s RAS[IRILSQ DO SLI[KOM BOLX[OGO KOLI^ESTWA FAJLOWX -pUSTOJ FAJLX -nET PREDYDU]EGO POISKA F, f, T, ILI tX -%s NE NAJDENOX -nET PREDYDU]EGO FAJLA DLQ REDAKTIROWANIQX -kURSOR STOIT NE NA CIFREX -pOLU^ENNOE ^ISLO SLI[KOM WELIKOX -pOLU^ENNOE ^ISLO SLI[KOM MALOX -pODHODQ]EGO SIMWOLA NET NA \TOJ STROKEX -pODHODQ]IJ SIMWOL NE NAJDENX -nET SIMWOLOW DLQ UDALENIQX -dRUGOGO \KRANA NE SU]ESTWUETX -sIMWOLY POSLE STROKI DLQ POISKA I/ILI PEREBOR STROKIX -pRO[LYJ OBRAZEC POISKA OTSUTSTWUETX -pOISK ZAWER[ILSQ NA NA^ALXNOJ POZICIIX - -sIMWOL NEPRAWILEN; ZAKL@^EN W KAWY^KI DLQ WWODAX -uVE NA NA^ALE WSTAWKIX -nET SIMWOLOW DLQ UDALENIQX -pEREDWIVENIE ZA KONEC FAJLAX -pEREDWIVENIE ZA KONEC STROKIX -dWIVENIE STROKI NE SDELANOX -uVE NA NA^ALE FAJLAX -dWIVENIE KURSORA ZA NA^ALO FAJLAX -uVE W PERWOJ KOLONKEX -bUFERY DOLVNY BYTX UKAZANY DO WYPOLNENIQ KOMANDYX -uVE NA KONCE FAJLAX -uVE NA KONSE STROKIX -%s NE QWLQETSQ KOMANDOJ VIX -iSPOLXZOWANIE: %sX -nET SIMWOLOW DLQ UDALENIQX - -nET KOMANDY DLQ POWTORAX - -kOMANDA %s NE MOVET BYTX ISPOLXZOWANA KAK KOMANDA PRODWIVENIQX -~ISLO BOLX[E ^EM %luX - - -zNA^ENIE KOLI^ESTWA OKON SLI[KOM WELIKO, MAKSIMALXNOE ZNA^ENIE = %uX - - - - - -dWIVENIE KURSORA ZA KONEC \KRANAX -dWIVENIE KURSORA ZA NA^ALO \KRANAX - -tENEWYH OKON NETX -nE SU]ESTWUET TENEWOGO OKNA S REDAKTIROWANIEM FAJLA %sX -wY NE MOVETE SDELATX EDINSTWENNOE OKNO TENEWYMX -|KRAN MOVET BYTX SVATX -|KRAN NE MOVET BYTX SVATX -|KRAN NE MOVET BYTX RAS[IRENX - - - - -dANNYJ TIP TERMINALA NE IMEET KLAWI[I %sX - - - -nEWOZMOVNO SOZDATX WREMENNYJ FAJLX -wNIMANIE: %s SPECIALXNYJ FAJLX -%s UVE ZABLOKIROWAN, DOSTUPEN TOLXKO NA ^TENIEX -%s: UDALENX -%s: ZAKRYTX -%s: UDALENX -%s: UDALENX -fAJL TOLXKO DLQ ^TENIQ, NE ZAPISAN: iSPOLXZUJTE ! DLQ OBHODAX -fAJL TOLXKO DLQ ^TENIQ, NE ZAPISANX -%s SU]ESTWUET, NE ZAPISAN; ISPOLXZUJTE ! DLQ OBHODAX -%s SU]ESTWUET, NE ZAPISANX -iSPOLXZUJTE ! DLQ ^ASTI^NOJ ZAPISI FAJLAX -~ASTX FAJLA, FAJL NE ZAPISANX -%s: fAJL IZMENQLSQ POZDNEE, ^EM DANNAQ KOPIQ: ISPOLXZUJTE ! DLQ OBHODAX -%s: fAJL IZMENQLSQ POZDNEE, ^EM DANNAQ KOPIQX -%s: ZA]ITA NA ZAPISX BYLA NEDOSTUPNAX - -%s: wnimanie: fajl use~enX - -%s: NOWYJ FAJL: %lu STROK, %lu SIMWOLOWX -%s: %lu STROK, %lu SIMWOLOWX -%s RAS[IRILSQ W SLI[KOM BOLX[OE KOLI^ESTWO IMEN FAJLOWX -%s SPECIALXNYJ FAJLX -%s: NE PRINADLEVIT wAMX -%s: DOSTUPEN NE TOLXKO wAMX -fAJL IZMENEN SO WREMENI POSLEDNEJ ZAPISI: SOHRANITE ILI ISPOLXZUJTE ! DLQ OBHODAX -fAJL IZMENEN SO WREMENI POSLEDNEJ ZAPISI: SOHRANITE ILI ISPOLXZUJTE :edit DLQ OBHODAX -fAJL IZMENEN SO WREMENI POSLEDNEJ ZAPISI: SOHRANITE ILI ISPOLXZUJTE ! DLQ OBHODAX -fAJL WREMENNYJ: WYHOD SOTRET L@BYE IZMENENIQX - -zAPISI NA^ATY ZANOWOX diff --git a/catalog/ru_RU.KOI8-R.base b/catalog/ru_RU.KOI8-R.base index 59efd3f53a5f..6d1c1b5d08bc 100644 --- a/catalog/ru_RU.KOI8-R.base +++ b/catalog/ru_RU.KOI8-R.base @@ -1,219 +1,311 @@ -002 "pEREPOLNENIE ZNA^ENIQ DLINY STROKI" -003 "%s/%d: NEWOZMOVNO UDALITX STROKU %u" -004 "%s/%d: NEWOZMOVNO DOBAWITX K STROKE %u" -005 "%s/%d: NEWOZMOVNO WSTAWITX W STROKU %u" -006 "%s/%d: NEWOZMOVNO SOHRANITX STROKU %u" -007 "%s/%d: NEWOZMOVNO DOSTATX POSLEDN@@ STROKU" -009 "fAJL ZAPISEJ" -010 "zAPISI NE WELISX, NEWOZMOVNO OTMENITX POSLEDN@@ KOMANDU" -011 "nET IZMENENIJ DLQ OTMENY" -012 "zAPISI NE WELISX, NEWOZMOVNO OTMENITX POSLEDN@@ KOMANDU" -013 "zAPISI NE WELISX, NEWOZMOVNO PROSMOTRETX WPERED" -014 "nET IZMENENIJ DLQ PEREDELKI" -015 "%s/%d: O[IBKA PRI ZAPISI PROTOKOLA" -016 "sTANDARTNYJ WWOD/WYWOD DLQ VI DOLVEN BYTX TERMINAL" -017 "oTMETKA %s: NE USTANOWLENA" -018 "oTMETKA %s: STROKA BYLA UDALENA" -019 "oTMETKA %s: POZICII KURSORA BOLX[E NE SU]ESTWUET" -020 "o[IBKA:" -030 "fAJL %s NE QWLQETSQ KATALOGOM SOOB]ENIJ" -031 "nEWOZMOVNO USTANOWITX OPCI@ %s PO UMOL^ANI@" -032 "iSPOLXZOWANIE: %s" -033 "oPCII %s NET: 'set all' POKAZYWAET WSE WOZMOVNYE OPCII" -034 "set: [no]%s NE PRINIMAET TAKOGO ZNA^ENIQ" -035 "set: %s OPCIQ NE QWLQETSQ DWOI^NOJ" -038 "set: NEPRAWILXNOE ZNA^ENIE %s" -039 "set: %s OPCIQ NE QWLQETSQ DWOI^NOJ" -040 "kOLI^ESTWO KOLONOK \KRANA SLI[KOM MALO, MENX[E ^EM %d" -041 "kOLI^ESTWO KOLONOK \KRANA SLI[KOM WELIKO, BOLX[E ^EM %d" -042 "kOLI^ESTWO STROK \KRANA SLI[KOM MALO, MENX[E ^EM %d" -043 "kOLI^ESTWO STROK \KRANA SLI[KOM WELIKO, BOLX[E ^EM %d" -044 "oPCIQ lisp OTSUTSTWUET" -045 "sOOB]ENIQ NE WYKL@^ENY: %s" -046 "sOOB]ENIQ NE WKL@^ENY: %s" -047 "oPCIQ modeline(s) NE MOVET BYTX PEREUSTANOWLENA" -048 "oPCIQ paragraph DOLVNA SOSTOQTX IZ GRUPP S DWUMQ SIMWOLAMI" -049 "oPCIQ section DOLVNA SOSTOQTX IZ GRUPP S DWUMQ SIMWOLAMI" -050 "oPCIQ shiftwidth NE MOVET BYTX USTANOWLENA NA 0" -051 "oPCIQ sourceany NE MOVET BYTX USTANOWLENA" -052 "tABULQCIQ NE MOVET BYTX USTANOWLENA NA 0" -053 "sTARTOWYJ BUFER PUST" -054 "bUFER %s PUST" -055 "fAJLY S SIMWOLAMI PEREWODA STROKI W IMENI NE MOGUT BYTX WOSSTANOWLENY" -056 "iZMENENIQ NE SOHRANENY PRI KRAHE SESSII" -058 "sOHRANENIE NE UDALOSX: %s" -059 "iZMENENIQ NE SOHRANQ@TSQ PRI OBRYWE SESSII" -060 "sOHRANENIE KOPII FAJLA NE UDALOSX: %s" -062 "iNFORMACII NA POLXZOWATELQ %u NE NAJDENO" -063 "nEWOZMOVNO ZA]ITITX SPASENNYJ FAJL" -064 "bUFER WOSSTANOWLENNOGO FAJLA PEREPOLNEN" -065 "wOSSTANOWLENNYJ FAJL" -066 "%s: NE DO KONCA WOSSTANOWLENNYJ FAJL" -067 "%s: NE DO KONCA WOSSTANOWLENNYJ FAJL" -068 "fAJLOW S IMENEM %s, KOTORYE wY MOVETE ^ITATX, NE SU]ESTWUET" -069 "eSTX STARYE WERSII FAJLA, KOTORYE MOVNO WOSSTANOWITX" -070 "sU]ESTWU@T DRUGIE FAJLY, KOTORYE MOVNO WOSSTANOWITX" -071 "E-mail NE POSLAN: %s" -072 "fAJL PUST - ISKATX NE^EGO" -073 "dOSTIGNUT KONEC FAJLA BEZ NAHOVDENIQ OBRAZCA POISKA" -074 "nE ZADAN OBRAZEC POISKA" -075 "oBRAZEC POISKA NE NAJDEN" -076 "dOSTUPNO NA^ALO FAJLA BEZ NAHOVDENIQ OBRAZCA POISKA" -077 "pOISK ZACIKLEN" -079 "nEPE^ATNYH SIMWOLOW NE NAJDENO" -080 "nEIZWESTNAQ KOMANDA" -082 "kOMANDA NE DOSTUPNA W REVIME ex" -083 "s^ET^IK NE MOVET BYTX NULEM" -084 "%s: NEPRAWILXNOE UKAZANIE STROKI" -085 "wNUTRENNQQ O[IBKA W SINTAKSISE (%s: %s)" -086 "iSPOLXZOWANIE: %s" -087 "%s: WREMENNYJ BUFER NE ISPOLXZOWAN" -088 "mETKA POSTAWLENA PERED STROKOJ 1" -089 "mETKA POSTAWLENA POSLE KONCA FAJLA" -092 "kOMANDA ex NE UDALASX: PARAMETRY KOMANDY ZABYTY" -094 "wTOROJ ADRES MENX[E ^EM PERWYJ" -095 "nE UKAZANO NAZWANIE OTMETKI" -096 "\\ NE ZAWER[AETSQ / ILI ?" -097 "sSYLKA K STROKE S NOMEROM MENX[E 0" -098 "kOMANDA %s NEIZWESTNA" -099 "pEREPOLNENIE ZNA^ENIQ ADRESA" -100 "nEDOBOR ZNA^ENIQ ADRESA" -101 "nEDOPUSTIMAQ KOMBINACIQ W ADRESE" -102 "nEPRAWILXNYJ ADRES: WSEGO %lu STROK W FAJLE" -103 "nEPRAWILXNYJ ADRES: FAJL PUST" -104 "kOMMANDA %s NE MOVET ISPOLXZOWATX ADRES 0" -105 "aBBREWIATURY OTSUTSTWU@T" -106 "aBBREWIATURY DOLVNY ZAKAN^IWATXSQ SIMWOLOM "word"" -107 "aBBREWIATURY NE MOGUT SODERVATX SIMWOLOY TABLQCII ILI PROBELY" -108 "aBBREWIATURY NE MOGUT SO^ETATXSQ S SIMWOLAMI SLOW/NE-SLOW, ZA ISKL@^ENIEM KONCA STROKI" -109 ""%s" NE QWLQETSQ ABBREWIATUROJ" -111 "fAJLOW DLQ REDAKTIROWANIQ BOLX[E NET" -112 "oTSUTSTWIE PREDYDU]EGO FAJLA DLQ REDAKTIROWANIQ" -113 "oTSUTSTWIE PREDYDU]EGO FAJLA DLQ PROSMOTRA NAZAD" -114 "nET FAJLOW" -115 "oTSUTSTWIE PREDYDU]EJ KOMANDY DLQ ZAMENY "!"" -116 "oTSUTSTWIE ZAMENY DLQ %%" -117 "oTSUTSTWIE ZAMENY DLQ #" -118 "o[IBKA: execl: %s" -119 "o[IBKA WWODA/WYWODA: %s" -120 "fAJL IZMENEN S MOMENTA POSLEDNEJ POLNOJ ZAPISI: ISPOLXZUJTE ! DLQ OBHODA" -121 "nEWOZMOVNO NAJTI DOMA[NIJ KATALOG" -122 "nOWYJ KATALOG: %s" -123 "nET WYREZANYH BUFEROW" -124 "kOMANDA %s NE MOVET BYTX ISPOLXZOWANA WNUTRI OB]EJ KOMANDY" -125 "%s/%s: NE OTKRYT: NE PRINADLEVIT wAM ILI root-U" -126 "%s/%s: NE OTKRYT: NE PRINADLEVIT wAM" -127 "%s/%s: NE OTKRYT: WOZMOVNOSTX ZAPISI U POLXZOWATELQ, NE QWLQ@]EGOSQ WLADELXCEM" -128 "%s/%s: NE S^ITAN: NE PRINADLEVIT wAM ILI root-U" -129 "%s/%s: NE S^ITAN: NE PRINADLEVIT wAM" -130 "%s/%s: NE S^ITAN: WOZMOVNOSTX ZAPISI U POLXZOWATELQ, NE QWLQ@]EGOSQ WLADELXCEM" -131 "pOSLEDU@]IE STROKI OTSUTSTWU@T" -132 "oTSUTSTWIE PARAMETROW WWODA" -133 "oTSUTSTWIE PARAMETROW KOMANDY" -134 "sIMWOL %s NE MOVET BYTX PEREZAPOMNEN" -135 ""%s" NA DANNYJ MOMENT NE OTME^EN" -136 "iMQ METKI DOLVNO BYTX ODNIM SIMWOLOM" -137 "%s SU]ESTWUET, NE ZAPISAN; ISPOLXZUJTE ! DLQ OBHODA" -138 "nOWYJ FAJL .exrc: %s" -139 "sTROKA PERENOSA NAHODITSQ WNUTRI PARAMETROW PERENOSA" -140 "kOMANDA open PODRAZUMEWAET USTANOWKU OPCII open" -141 "kOMANDA open NE REALIZOWANA" -142 "zA]ITA FAJLA NEWOZMOVNA" -143 "fAJL ZA]I]EN" -144 "%s RAS[IRILSQ W SLI[KOM BOLX[OE KOLI^ESTWO IMEN FAJLOW" -146 "%s: ZA]ITA NA ^TENIE BYLA NEDOSTUPNA" -148 "%s: %lu STROK, %lu SIMWOLOW" -149 "nET TENEWYH OKON" -150 "kOMANDA script ISPOLXZUETSQ TOLXKO W REVIME vi" -151 "nET KOMANDY DLQ ISPOLNENIQ" -152 "oPCIQ shiftwidth USTANOWLENA NA 0" -153 "pEREPOLNENIE S^ET^IKA" -154 "cIKL WYPOLNEN NE DO KONCA" -155 "uKAZANO REGULQRNOE WYRAVENIE: FLAG r NE NUVEN" -156 "fLAGI #, l I p NE MOGUT BYTX OB_EDINENY S FLAGOM c W REVIME vi" -157 "sOWPADENIJ NET" -158 "mETKA OTSUTSTWUET" -159 "w STEKE METOK ZAPISEJ MENX[E, ^EM %s, ISPOLXZUJTE :display t[ags]" -160 "fAJLA S IMENEM %s W STEKE METOK NET; ISPOLXZUJTE :display t[ags]" -162 "%s: METKA NE NAJDENA" -163 "%s: PLOHAQ METKA W %s" -165 "sTEK METOK PUST" -166 "%s: ISKOMAQ PEREMENNAQ NE NAJDENA" -168 "bUFER %s PUST" -170 "pRERWANO" -171 "oTSUTSTWIE BUFERA DLQ ISPOLXZOWANIQ" -172 "nET PREDIDU]EGO REGULQRNOGO WYRAVENIQ" -173 "kOMANDA %s PODRAZUMEWAET NALI^IE PRO^TENNOGO FAJLA" -174 "iSPOLXZOWANIE: %s" -175 "kOMANDA visual PODRAZUMEWAET OBQZATELXNU@ USTANOWKU OPCII open" -176 "%s RAS[IRILSQ DO SLI[KOM BOLX[OGO KOLI^ESTWA FAJLOW" -177 "pUSTOJ FAJL" -178 "nET PREDYDU]EGO POISKA F, f, T, ILI t" -179 "%s NE NAJDENO" -180 "nET PREDYDU]EGO FAJLA DLQ REDAKTIROWANIQ" -181 "kURSOR STOIT NE NA CIFRE" -182 "pOLU^ENNOE ^ISLO SLI[KOM WELIKO" -183 "pOLU^ENNOE ^ISLO SLI[KOM MALO" -184 "pODHODQ]EGO SIMWOLA NET NA \TOJ STROKE" -185 "pODHODQ]IJ SIMWOL NE NAJDEN" -186 "nET SIMWOLOW DLQ UDALENIQ" -187 "dRUGOGO \KRANA NE SU]ESTWUET" -188 "sIMWOLY POSLE STROKI DLQ POISKA I/ILI PEREBOR STROKI" -189 "pRO[LYJ OBRAZEC POISKA OTSUTSTWUET" -190 "pOISK ZAWER[ILSQ NA NA^ALXNOJ POZICII" -192 "sIMWOL NEPRAWILEN; ZAKL@^EN W KAWY^KI DLQ WWODA" -193 "uVE NA NA^ALE WSTAWKI" -194 "nET SIMWOLOW DLQ UDALENIQ" -195 "pEREDWIVENIE ZA KONEC FAJLA" -196 "pEREDWIVENIE ZA KONEC STROKI" -197 "dWIVENIE STROKI NE SDELANO" -198 "uVE NA NA^ALE FAJLA" -199 "dWIVENIE KURSORA ZA NA^ALO FAJLA" -200 "uVE W PERWOJ KOLONKE" -201 "bUFERY DOLVNY BYTX UKAZANY DO WYPOLNENIQ KOMANDY" -202 "uVE NA KONCE FAJLA" -203 "uVE NA KONSE STROKI" -204 "%s NE QWLQETSQ KOMANDOJ VI" -205 "iSPOLXZOWANIE: %s" -206 "nET SIMWOLOW DLQ UDALENIQ" -208 "nET KOMANDY DLQ POWTORA" -210 "kOMANDA %s NE MOVET BYTX ISPOLXZOWANA KAK KOMANDA PRODWIVENIQ" -211 "~ISLO BOLX[E ^EM %lu" -214 "zNA^ENIE KOLI^ESTWA OKON SLI[KOM WELIKO, MAKSIMALXNOE ZNA^ENIE = %u" -220 "dWIVENIE KURSORA ZA KONEC \KRANA" -221 "dWIVENIE KURSORA ZA NA^ALO \KRANA" -223 "tENEWYH OKON NET" -224 "nE SU]ESTWUET TENEWOGO OKNA S REDAKTIROWANIEM FAJLA %s" -225 "wY NE MOVETE SDELATX EDINSTWENNOE OKNO TENEWYM" -226 "|KRAN MOVET BYTX SVAT" -227 "|KRAN NE MOVET BYTX SVAT" -228 "|KRAN NE MOVET BYTX RAS[IREN" -233 "dANNYJ TIP TERMINALA NE IMEET KLAWI[I %s" -237 "nEWOZMOVNO SOZDATX WREMENNYJ FAJL" -238 "wNIMANIE: %s SPECIALXNYJ FAJL" -239 "%s UVE ZABLOKIROWAN, DOSTUPEN TOLXKO NA ^TENIE" -240 "%s: UDALEN" -241 "%s: ZAKRYT" -242 "%s: UDALEN" -243 "%s: UDALEN" -244 "fAJL TOLXKO DLQ ^TENIQ, NE ZAPISAN: iSPOLXZUJTE ! DLQ OBHODA" -245 "fAJL TOLXKO DLQ ^TENIQ, NE ZAPISAN" -246 "%s SU]ESTWUET, NE ZAPISAN; ISPOLXZUJTE ! DLQ OBHODA" -247 "%s SU]ESTWUET, NE ZAPISAN" -248 "iSPOLXZUJTE ! DLQ ^ASTI^NOJ ZAPISI FAJLA" -249 "~ASTX FAJLA, FAJL NE ZAPISAN" -250 "%s: fAJL IZMENQLSQ POZDNEE, ^EM DANNAQ KOPIQ: ISPOLXZUJTE ! DLQ OBHODA" -251 "%s: fAJL IZMENQLSQ POZDNEE, ^EM DANNAQ KOPIQ" -252 "%s: ZA]ITA NA ZAPISX BYLA NEDOSTUPNA" -254 "%s: wnimanie: fajl use~en" -256 "%s: NOWYJ FAJL: %lu STROK, %lu SIMWOLOW" -257 "%s: %lu STROK, %lu SIMWOLOW" -258 "%s RAS[IRILSQ W SLI[KOM BOLX[OE KOLI^ESTWO IMEN FAJLOW" -259 "%s SPECIALXNYJ FAJL" -260 "%s: NE PRINADLEVIT wAM" -261 "%s: DOSTUPEN NE TOLXKO wAM" -262 "fAJL IZMENEN SO WREMENI POSLEDNEJ ZAPISI: SOHRANITE ILI ISPOLXZUJTE ! DLQ OBHODA" -263 "fAJL IZMENEN SO WREMENI POSLEDNEJ ZAPISI: SOHRANITE ILI ISPOLXZUJTE :edit DLQ OBHODA" -264 "fAJL IZMENEN SO WREMENI POSLEDNEJ ZAPISI: SOHRANITE ILI ISPOLXZUJTE ! DLQ OBHODA" -265 "fAJL WREMENNYJ: WYHOD SOTRET L@BYE IZMENENIQ" -267 "zAPISI NA^ATY ZANOWO" +002 "ðÅÒÅÐÏÌÎÅÎÉÅ ÚÎÁÞÅÎÉÑ ÄÌÉÎÙ ÓÔÒÏËÉ" +003 "ÎÅ×ÏÚÍÏÖÎÏ ÕÄÁÌÉÔØ ÓÔÒÏËÕ %lu" +004 "ÎÅ×ÏÚÍÏÖÎÏ ÄÏÂÁ×ÉÔØ Ë ÓÔÒÏËÅ %lu" +005 "ÎÅ×ÏÚÍÏÖÎÏ ×ÓÔÁ×ÉÔØ × ÓÔÒÏËÕ %lu" +006 "ÎÅ×ÏÚÍÏÖÎÏ ÓÏÈÒÁÎÉÔØ ÓÔÒÏËÕ %lu" +007 "ÎÅ×ÏÚÍÏÖÎÏ ÄÏÓÔÁÔØ ÐÏÓÌÅÄÎÀÀ ÓÔÒÏËÕ" +008 "ïÛÉÂËÁ: ÎÅ ÕÄÁÌÏÓØ ÐÏÌÕÞÉÔØ ÓÔÒÏËÕ %lu" +009 "æÁÊÌ ÚÁÐÉÓÅÊ" +010 "úÁÐÉÓÉ ÎÅ ×ÅÌÉÓØ, ÎÅ×ÏÚÍÏÖÎÏ ÏÔÍÅÎÉÔØ ÐÏÓÌÅÄÎÀÀ ËÏÍÁÎÄÕ" +011 "îÅÔ ÉÚÍÅÎÅÎÉÊ ÄÌÑ ÏÔÍÅÎÙ" +012 "úÁÐÉÓÉ ÎÅ ×ÅÌÉÓØ, ÎÅ×ÏÚÍÏÖÎÏ ÏÔÍÅÎÉÔØ ÐÏÓÌÅÄÎÀÀ ËÏÍÁÎÄÕ" +013 "úÁÐÉÓÉ ÎÅ ×ÅÌÉÓØ, ÎÅ×ÏÚÍÏÖÎÏ ÐÒÏÓÍÏÔÒÅÔØ ×ÐÅÒÅÄ" +014 "îÅÔ ÉÚÍÅÎÅÎÉÊ ÄÌÑ ÐÅÒÅÄÅÌËÉ" +015 "%s/%d: ÏÛÉÂËÁ ÐÒÉ ÚÁÐÉÓÉ ÐÒÏÔÏËÏÌÁ" +016 "óÔÁÎÄÁÒÔÎÙÊ ××ÏÄ/×Ù×ÏÄ ÄÌÑ VI ÄÏÌÖÅÎ ÂÙÔØ ÔÅÒÍÉÎÁÌ" +017 "ïÔÍÅÔËÁ %s: ÎÅ ÕÓÔÁÎÏ×ÌÅÎÁ" +018 "ïÔÍÅÔËÁ %s: ÓÔÒÏËÁ ÂÙÌÁ ÕÄÁÌÅÎÁ" +019 "ïÔÍÅÔËÁ %s: ÐÏÚÉÃÉÉ ËÕÒÓÏÒÁ ÂÏÌØÛÅ ÎÅ ÓÕÝÅÓÔ×ÕÅÔ" +020 "ïÛÉÂËÁ: " +021 "ÎÏ×ÙÊ ÆÁÊÌ" +022 "ÉÍÑ ÉÚÍÅÎÅÎÏ" +023 "ÍÏÄÉÆÉÃÉÒÏ×ÁÎÏ" +024 "ÎÅ ÍÏÄÉÆÉÃÉÒÏ×ÁÎÏ" +025 "òáúâìïëéòï÷áîï" +026 "ÔÏÌØËÏ ÞÔÅÎÉÅ" +027 "ÓÔÒÏËÁ %lu ÉÚ %lu [%ld%%]" +028 "ÐÕÓÔÏÊ ÆÁÊÌ" +029 "ÓÔÒÏËÁ %lu" +030 "æÁÊÌ %s ÎÅ Ñ×ÌÑÅÔÓÑ ËÁÔÁÌÏÇÏÍ ÓÏÏÂÝÅÎÉÊ" +031 "îÅ×ÏÚÍÏÖÎÏ ÕÓÔÁÎÏ×ÉÔØ ÏÐÃÉÀ %s ÐÏ ÕÍÏÌÞÁÎÉÀ" +032 "éÓÐÏÌØÚÏ×ÁÎÉÅ: %s" +033 "ïÐÃÉÉ %s ÎÅÔ: 'set all' ÐÏËÁÚÙ×ÁÅÔ ×ÓÅ ×ÏÚÍÏÖÎÙÅ ÏÐÃÉÉ" +034 "set: [no]%s ÎÅ ÐÒÉÎÉÍÁÅÔ ÔÁËÏÇÏ ÚÎÁÞÅÎÉÑ" +035 "set: %s ÏÐÃÉÑ ÎÅ Ñ×ÌÑÅÔÓÑ ÌÏÇÉÞÅÓËÏÊ" +036 "set: %s ÏÐÃÉÑ: %s" +037 "set: %s ÏÐÃÉÑ: %s: ÚÎÁÞÅÎÉÅ ÐÅÒÅÐÏÌÎÅÎÉÑ" +038 "set: ÎÅÐÒÁ×ÉÌØÎÏÅ ÚÎÁÞÅÎÉÅ %s" +039 "set: %s ÏÐÃÉÑ ÎÅ Ñ×ÌÑÅÔÓÑ ÌÏÇÉÞÅÓËÏÊ" +040 "ëÏÌÉÞÅÓÔ×Ï ËÏÌÏÎÏË ÜËÒÁÎÁ ÓÌÉÛËÏÍ ÍÁÌÏ, ÍÅÎØÛÅ ÞÅÍ %d" +041 "ëÏÌÉÞÅÓÔ×Ï ËÏÌÏÎÏË ÜËÒÁÎÁ ÓÌÉÛËÏÍ ×ÅÌÉËÏ, ÂÏÌØÛÅ ÞÅÍ %d" +042 "ëÏÌÉÞÅÓÔ×Ï ÓÔÒÏË ÜËÒÁÎÁ ÓÌÉÛËÏÍ ÍÁÌÏ, ÍÅÎØÛÅ ÞÅÍ %d" +043 "ëÏÌÉÞÅÓÔ×Ï ÓÔÒÏË ÜËÒÁÎÁ ÓÌÉÛËÏÍ ×ÅÌÉËÏ, ÂÏÌØÛÅ ÞÅÍ %d" +044 "ïÐÃÉÑ lisp ÏÔÓÕÔÓÔ×ÕÅÔ" +045 "óÏÏÂÝÅÎÉÑ ÎÅ ×ÙËÌÀÞÅÎÙ: %s" +046 "óÏÏÂÝÅÎÉÑ ÎÅ ×ËÌÀÞÅÎÙ: %s" +047 "ïÐÃÉÑ %s ÄÏÌÖÎÁ ÓÏÓÔÏÑÔØ ÉÚ ÇÒÕÐÐ Ó Ä×ÕÍÑ ÓÉÍ×ÏÌÁÍÉ" +053 "óÔÁÒÔÏ×ÙÊ ÂÕÆÅÒ ÐÕÓÔ" +054 "âÕÆÅÒ %s ÐÕÓÔ" +055 "æÁÊÌÙ Ó ÓÉÍ×ÏÌÁÍÉ ÐÅÒÅ×ÏÄÁ ÓÔÒÏËÉ × ÉÍÅÎÉ ÎÅ ÍÏÇÕÔ ÂÙÔØ ×ÏÓÓÔÁÎÏ×ÌÅÎÙ" +056 "éÚÍÅÎÅÎÉÑ ÎÅ ÓÏÈÒÁÎÅÎÙ ÐÒÉ ËÒÁÈÅ ÓÅÓÓÉÉ" +057 "ëÏÐÉÒÏ×ÁÎÉÅ ÆÁÊÌÁ ÄÌÑ ×ÏÓÓÔÁÎÏ×ÌÅÎÉÑ..." +058 "óÏÈÒÁÎÅÎÉÅ ÎÅ ÕÄÁÌÏÓØ: %s" +059 "éÚÍÅÎÅÎÉÑ ÎÅ ÓÏÈÒÁÎÑÀÔÓÑ ÐÒÉ ÏÂÒÙ×Å ÓÅÓÓÉÉ" +060 "óÏÈÒÁÎÅÎÉÅ ËÏÐÉÉ ÆÁÊÌÁ ÎÅ ÕÄÁÌÏÓØ: %s" +061 "ëÏÐÉÒÏ×ÁÎÉÅ ÆÁÊÌÁ ÄÌÑ ×ÏÓÓÔÁÎÏ×ÌÅÎÉÑ..." +062 "éÎÆÏÒÍÁÃÉÉ ÎÁ ÐÏÌØÚÏ×ÁÔÅÌÑ %u ÎÅ ÎÁÊÄÅÎÏ" +063 "îÅ×ÏÚÍÏÖÎÏ ÚÁÝÉÔÉÔØ ÓÐÁÓÅÎÎÙÊ ÆÁÊÌ" +064 "âÕÆÅÒ ×ÏÓÓÔÁÎÏ×ÌÅÎÎÏÇÏ ÆÁÊÌÁ ÐÅÒÅÐÏÌÎÅÎ" +065 "÷ÏÓÓÔÁÎÏ×ÌÅÎÎÙÊ ÆÁÊÌ" +066 "%s: ÎÅ ÄÏ ËÏÎÃÁ ×ÏÓÓÔÁÎÏ×ÌÅÎÎÙÊ ÆÁÊÌ" +067 "%s: ÎÅ ÄÏ ËÏÎÃÁ ×ÏÓÓÔÁÎÏ×ÌÅÎÎÙÊ ÆÁÊÌ" +068 "æÁÊÌÏ× Ó ÉÍÅÎÅÍ %s, ËÏÔÏÒÙÅ ÷Ù ÍÏÖÅÔÅ ÞÉÔÁÔØ, ÎÅ ÓÕÝÅÓÔ×ÕÅÔ" +069 "åÓÔØ ÓÔÁÒÙÅ ×ÅÒÓÉÉ ÆÁÊÌÁ, ËÏÔÏÒÙÅ ÍÏÖÎÏ ×ÏÓÓÔÁÎÏ×ÉÔØ" +070 "óÕÝÅÓÔ×ÕÀÔ ÄÒÕÇÉÅ ÆÁÊÌÙ, ËÏÔÏÒÙÅ ÍÏÖÎÏ ×ÏÓÓÔÁÎÏ×ÉÔØ" +071 "Å-mail ÎÅ ÐÏÓÌÁÎ: %s" +072 "æÁÊÌ ÐÕÓÔ - ÉÓËÁÔØ ÎÅÞÅÇÏ" +073 "äÏÓÔÉÇÎÕÔ ËÏÎÅà ÆÁÊÌÁ ÂÅÚ ÎÁÈÏÖÄÅÎÉÑ ÏÂÒÁÚÃÁ ÐÏÉÓËÁ" +074 "îÅ ÚÁÄÁÎ ÏÂÒÁÚÅà ÐÏÉÓËÁ" +075 "ïÂÒÁÚÅà ÐÏÉÓËÁ ÎÅ ÎÁÊÄÅÎ" +076 "äÏÓÔÕÐÎÏ ÎÁÞÁÌÏ ÆÁÊÌÁ ÂÅÚ ÎÁÈÏÖÄÅÎÉÑ ÏÂÒÁÚÃÁ ÐÏÉÓËÁ" +077 "ðÏÉÓË ÚÁÃÉËÌÅÎ" +078 "ðÏÉÓË..." +079 "îÅÐÅÞÁÔÎÙÈ ÓÉÍ×ÏÌÏ× ÎÅ ÎÁÊÄÅÎÏ" +080 "îÅÉÚ×ÅÓÔÎÁÑ ËÏÍÁÎÄÁ" +082 "%s: ËÏÍÁÎÄÁ ÎÅ ÄÏÓÔÕÐÎÁ × ÒÅÖÉÍÅ ex" +083 "óÞÅÔÞÉË ÎÅ ÍÏÖÅÔ ÂÙÔØ ÎÕÌÅÍ" +084 "%s: ÎÅÐÒÁ×ÉÌØÎÏÅ ÕËÁÚÁÎÉÅ ÓÔÒÏËÉ" +085 "÷ÎÕÔÒÅÎÎÑÑ ÏÛÉÂËÁ × ÓÉÎÔÁËÓÉÓÅ (%s: %s)" +086 "éÓÐÏÌØÚÏ×ÁÎÉÅ: %s" +087 "%s: ×ÒÅÍÅÎÎÙÊ ÂÕÆÅÒ ÎÅ ÉÓÐÏÌØÚÏ×ÁÎ" +088 "íÅÔËÁ ÐÏÓÔÁ×ÌÅÎÁ ÐÅÒÅÄ ÓÔÒÏËÏÊ 1" +089 "íÅÔËÁ ÐÏÓÔÁ×ÌÅÎÁ ÐÏÓÌÅ ËÏÎÃÁ ÆÁÊÌÁ" +090 "@ Ó ÄÉÁÐÁÚÏÎÏÍ ×ÙÐÏÌÎÑÅÔÓÑ ËÏÇÄÁ ÆÁÊÌ/ÜËÒÁÎ ÉÚÍÅÎÅÎÙ" +091 "çÌÏÂÁÌØÎÁÑ/v ËÏÍÁÎÄÁ ×ÙÐÏÌÎÑÅÔÓÑ ËÏÇÄÁ ÆÁÊÌ/ÜËÒÁÎ ÉÚÍÅÎÅÎÙ" +092 "ëÏÍÁÎÄÁ ex ÎÅ ÕÄÁÌÁÓØ: ÐÏÓÌÅÄÕÀÝÉÅ ËÏÍÁÎÄÙ ÚÁÂÙÔÙ" +093 "ëÏÍÁÎÄÁ ex ÎÅ ÕÄÁÌÁÓØ: ÎÁÚÎÁÞÅÎÎÙÅ ËÌÁ×ÉÛÉ ÚÁÂÙÔÙ" +094 "÷ÔÏÒÏÊ ÁÄÒÅÓ ÍÅÎØÛÅ ÞÅÍ ÐÅÒ×ÙÊ" +095 "îÅ ÕËÁÚÁÎÏ ÎÁÚ×ÁÎÉÅ ÏÔÍÅÔËÉ" +096 "\\ ÎÅ ÚÁ×ÅÒÛÁÅÔÓÑ / ÉÌÉ ?" +097 "óÓÙÌËÁ Ë ÓÔÒÏËÅ Ó ÎÏÍÅÒÏÍ ÍÅÎØÛÅ 0" +098 "ëÏÍÁÎÄÁ %s ÎÅÉÚ×ÅÓÔÎÁ" +099 "ðÅÒÅÐÏÌÎÅÎÉÅ ÚÎÁÞÅÎÉÑ ÁÄÒÅÓÁ" +100 "îÅÄÏÂÏÒ ÚÎÁÞÅÎÉÑ ÁÄÒÅÓÁ" +101 "îÅÄÏÐÕÓÔÉÍÁÑ ËÏÍÂÉÎÁÃÉÑ × ÁÄÒÅÓÅ" +102 "îÅÐÒÁ×ÉÌØÎÙÊ ÁÄÒÅÓ: ×ÓÅÇÏ %lu ÓÔÒÏË × ÆÁÊÌÅ" +103 "îÅÐÒÁ×ÉÌØÎÙÊ ÁÄÒÅÓ: ÆÁÊÌ ÐÕÓÔ" +104 "ëÏÍÁÎÄÁ %s ÎÅ ÍÏÖÅÔ ÉÓÐÏÌØÚÏ×ÁÔØ ÁÄÒÅÓ 0" +105 "áÂÂÒÅ×ÉÁÔÕÒÙ ÏÔÓÕÔÓÔ×ÕÀÔ" +106 "áÂÂÒÅ×ÉÁÔÕÒÙ ÄÏÌÖÎÙ ÚÁËÁÎÞÉ×ÁÔØÓÑ ÓÉÍ×ÏÌÏÍ \"ÓÌÏ×\"" +107 "áÂÂÒÅ×ÉÁÔÕÒÙ ÎÅ ÍÏÇÕÔ ÓÏÄÅÒÖÁÔØ ÓÉÍ×ÏÌÙ ÔÁÂÕÌÑÃÉÉ ÉÌÉ ÐÒÏÂÅÌÙ" +108 "áÂÂÒÅ×ÉÁÔÕÒÙ ÎÅ ÍÏÇÕÔ ÓÏÞÅÔÁÔØÓÑ Ó ÓÉÍ×ÏÌÁÍÉ ÓÌÏ×/ÎÅ-ÓÌÏ×, ÚÁ ÉÓËÌÀÞÅÎÉÅÍ ËÏÎÃÁ ÓÔÒÏËÉ" +109 "\"%s\" ÎÅ Ñ×ÌÑÅÔÓÑ ÁÂÂÒÅ×ÉÁÔÕÒÏÊ" +110 "Vi ËÏÍÁÎÄÁ ÎÅ ÕÄÁÌÁÓØ: ÎÁÚÎÁÞÅÎÎÙÅ ËÌÁ×ÉÛÉ ÚÁÂÙÔÙ" +111 "æÁÊÌÏ× ÄÌÑ ÒÅÄÁËÔÉÒÏ×ÁÎÉÑ ÂÏÌØÛÅ ÎÅÔ" +112 "ïÔÓÕÔÓÔ×ÉÅ ÐÒÅÄÙÄÕÝÅÇÏ ÆÁÊÌÁ ÄÌÑ ÒÅÄÁËÔÉÒÏ×ÁÎÉÑ" +113 "ïÔÓÕÔÓÔ×ÉÅ ÐÒÅÄÙÄÕÝÅÇÏ ÆÁÊÌÁ ÄÌÑ ÐÒÏÓÍÏÔÒÁ ÎÁÚÁÄ" +114 "îÅÔ ÆÁÊÌÏ×" +115 "ïÔÓÕÔÓÔ×ÉÅ ÐÒÅÄÙÄÕÝÅÊ ËÏÍÁÎÄÙ ÄÌÑ ÚÁÍÅÎÙ \"!\"" +116 "ïÔÓÕÔÓÔ×ÉÅ ÚÁÍÅÎÙ ÄÌÑ %%" +117 "ïÔÓÕÔÓÔ×ÉÅ ÚÁÍÅÎÙ ÄÌÑ #" +118 "ïÛÉÂËÁ: execl: %s" +119 "ïÛÉÂËÁ ××ÏÄÁ/×Ù×ÏÄÁ: %s" +120 "æÁÊÌ ÉÚÍÅÎÅÎ Ó ÍÏÍÅÎÔÁ ÐÏÓÌÅÄÎÅÊ ÐÏÌÎÏÊ ÚÁÐÉÓÉ: ÉÓÐÏÌØÚÕÊÔÅ ! ÄÌÑ ÏÂÈÏÄÁ" +121 "îÅ×ÏÚÍÏÖÎÏ ÎÁÊÔÉ ÄÏÍÁÛÎÉÊ ËÁÔÁÌÏÇ" +122 "îÏ×ÙÊ ËÁÔÁÌÏÇ: %s" +123 "îÅÔ ×ÙÒÅÚÁÎÎÙÈ ÂÕÆÅÒÏ×" +124 "ëÏÍÁÎÄÁ %s ÎÅ ÍÏÖÅÔ ÂÙÔØ ÉÓÐÏÌØÚÏ×ÁÎÁ ×ÎÕÔÒÉ ÇÌÏÂÁÌØÎÏÊ ÉÌÉ v ËÏÍÁÎÄÙ" +125 "%s/%s: ÎÅ ÏÔËÒÙÔ: ÎÅ ÐÒÉÎÁÄÌÅÖÉÔ ÷ÁÍ ÉÌÉ root-Õ" +126 "%s/%s: ÎÅ ÏÔËÒÙÔ: ÎÅ ÐÒÉÎÁÄÌÅÖÉÔ ÷ÁÍ" +127 "%s/%s: ÎÅ ÏÔËÒÙÔ: ×ÏÚÍÏÖÎÏÓÔØ ÚÁÐÉÓÉ Õ ÐÏÌØÚÏ×ÁÔÅÌÑ, ÎÅ Ñ×ÌÑÀÝÅÇÏÓÑ ×ÌÁÄÅÌØÃÅÍ" +128 "%s: ÎÅ ÓÞÉÔÁÎ: ÎÅ ÐÒÉÎÁÄÌÅÖÉÔ ÷ÁÍ ÉÌÉ root-Õ" +129 "%s: ÎÅ ÓÞÉÔÁÎ: ÎÅ ÐÒÉÎÁÄÌÅÖÉÔ ÷ÁÍ" +130 "%s: ÎÅ ÓÞÉÔÁÎ: ×ÏÚÍÏÖÎÏÓÔØ ÚÁÐÉÓÉ Õ ÐÏÌØÚÏ×ÁÔÅÌÑ, ÎÅ Ñ×ÌÑÀÝÅÇÏÓÑ ×ÌÁÄÅÌØÃÅÍ" +131 "ðÏÓÌÅÄÕÀÝÉÅ ÓÔÒÏËÉ ÏÔÓÕÔÓÔ×ÕÀÔ" +132 "ïÔÓÕÔÓÔ×ÉÅ ÐÁÒÁÍÅÔÒÏ× ××ÏÄÁ" +133 "ïÔÓÕÔÓÔ×ÉÅ ÐÁÒÁÍÅÔÒÏ× ËÏÍÁÎÄÙ" +134 "óÉÍ×ÏÌ %s ÎÅ ÍÏÖÅÔ ÂÙÔØ ÐÅÒÅÎÁÚÎÁÞÅÎ" +135 "\"%s\" ÎÁ ÄÁÎÎÙÊ ÍÏÍÅÎÔ ÎÅ ÎÁÚÎÁÞÅÎ" +136 "éÍÑ ÍÅÔËÉ ÄÏÌÖÎÏ ÂÙÔØ ÏÄÎÉÍ ÓÉÍ×ÏÌÏÍ" +137 "%s ÓÕÝÅÓÔ×ÕÅÔ, ÎÅ ÚÁÐÉÓÁÎ; ÉÓÐÏÌØÚÕÊÔÅ ! ÄÌÑ ÏÂÈÏÄÁ" +138 "îÏ×ÙÊ ÆÁÊÌ exrc: %s" +139 "óÔÒÏËÁ ÐÅÒÅÎÏÓÁ ÎÁÈÏÄÉÔÓÑ ×ÎÕÔÒÉ ÐÁÒÁÍÅÔÒÏ× ÐÅÒÅÎÏÓÁ" +140 "ëÏÍÁÎÄÁ open ÐÏÄÒÁÚÕÍÅ×ÁÅÔ ÕÓÔÁÎÏ×ËÕ ÏÐÃÉÉ open" +141 "ëÏÍÁÎÄÁ open ÎÅ ÒÅÁÌÉÚÏ×ÁÎÁ" +142 "úÁÝÉÔÁ ÆÁÊÌÁ ÎÅ×ÏÚÍÏÖÎÁ" +143 "æÁÊÌ ÚÁÝÉÝÅÎ" +144 "%s ÒÁÓÛÉÒÉÌÓÑ × ÓÌÉÛËÏÍ ÂÏÌØÛÏÅ ËÏÌÉÞÅÓÔ×Ï ÉÍÅÎ ÆÁÊÌÏ×" +145 "ôÏÌØËÏ ÏÂÙÞÎÙÅ ÆÁÊÌÙ ÉÌÉ ÉÍÅÎÏ×ÁÎÎÙÅ ËÁÎÁÌÙ ÍÏÇÕÔ ÂÙÔØ ÐÒÏÞÉÔÁÎÙ" +146 "%s: ÚÁÝÉÔÁ ÎÁ ÞÔÅÎÉÅ ÂÙÌÁ ÎÅÄÏÓÔÕÐÎÁ" +147 "þÔÅÎÉÅ..." +148 "%s: %lu ÓÔÒÏË, %lu ÓÉÍ×ÏÌÏ×" +149 "îÅÔ ÔÅÎÅ×ÙÈ ÏËÏÎ" +150 "ëÏÍÁÎÄÁ script ÉÓÐÏÌØÚÕÅÔÓÑ ÔÏÌØËÏ × ÒÅÖÉÍÅ vi" +151 "îÅÔ ËÏÍÁÎÄÙ ÄÌÑ ÉÓÐÏÌÎÅÎÉÑ" +152 "ïÐÃÉÑ shiftwidth ÕÓÔÁÎÏ×ÌÅÎÁ ÎÁ 0" +153 "ðÅÒÅÐÏÌÎÅÎÉÅ ÓÞÅÔÞÉËÁ" +154 "ãÉËÌ ×ÙÐÏÌÎÅÎ ÎÅ ÄÏ ËÏÎÃÁ" +155 "õËÁÚÁÎÏ ÒÅÇÕÌÑÒÎÏÅ ×ÙÒÁÖÅÎÉÅ: ÆÌÁÇ r ÎÅ ÎÕÖÅÎ" +156 "æÌÁÇÉ #, l É p ÎÅ ÍÏÇÕÔ ÂÙÔØ ÏÂßÅÄÉÎÅÎÙ Ó ÆÌÁÇÏÍ c × ÒÅÖÉÍÅ vi" +157 "óÏ×ÐÁÄÅÎÉÊ ÎÅÔ" +158 "íÅÔËÁ ÏÔÓÕÔÓÔ×ÕÅÔ" +159 "÷ ÓÔÅËÅ ÍÅÔÏË ÚÁÐÉÓÅÊ ÍÅÎØÛÅ, ÞÅÍ %s, ÉÓÐÏÌØÚÕÊÔÅ :display t[ags]" +160 "æÁÊÌÁ Ó ÉÍÅÎÅÍ %s × ÓÔÅËÅ ÍÅÔÏË ÎÅÔ; ÉÓÐÏÌØÚÕÊÔÅ :display t[ags]" +161 "îÁÖÍÉÔÅ Enter ÞÔÏÂÙ ÐÒÏÄÏÌÖÉÔØ: " +162 "%s: ÍÅÔËÁ ÎÅ ÎÁÊÄÅÎÁ" +163 "%s: ÐÌÏÈÁÑ ÍÅÔËÁ × %s" +164 "%s: ÎÏÍÅÒ ÓÔÒÏËÉ ÍÅÔËÉ ×ÙÛÅÌ ÚÁ ËÏÎÅà ÆÁÊÌÁ" +165 "óÔÅË ÍÅÔÏË ÐÕÓÔ" +166 "%s: ÏÂÒÁÚÅà ÐÏÉÓËÁ ÎÅ ÎÁÊÄÅÎ" +167 "ÅÝÅ %d ÆÁÊÌÏ× ÄÌÑ ÒÅÄÁËÔÉÒÏ×ÁÎÉÑ" +168 "âÕÆÅÒ %s ÐÕÓÔ" +169 "ðÏÄÔ×ÅÒÄÉÔØ ÉÚÍÅÎÅÎÉÑ? [n]" +170 "ðÒÅÒ×ÁÎÏ" +171 "ïÔÓÕÔÓÔ×ÉÅ ÂÕÆÅÒÁ ÄÌÑ ÉÓÐÏÌØÚÏ×ÁÎÉÑ" +172 "îÅÔ ÐÒÅÄÙÄÕÝÅÇÏ ÒÅÇÕÌÑÒÎÏÇÏ ×ÙÒÁÖÅÎÉÑ" +173 "ëÏÍÁÎÄÁ %s ÐÏÄÒÁÚÕÍÅ×ÁÅÔ ÎÁÌÉÞÉÅ ÐÒÏÞÔÅÎÎÏÇÏ ÆÁÊÌÁ" +174 "éÓÐÏÌØÚÏ×ÁÎÉÅ: %s" +175 "ëÏÍÁÎÄÁ visual ÐÏÄÒÁÚÕÍÅ×ÁÅÔ ÏÂÑÚÁÔÅÌØÎÕÀ ÕÓÔÁÎÏ×ËÕ ÏÐÃÉÉ open" +177 "ðÕÓÔÏÊ ÆÁÊÌ" +178 "îÅÔ ÐÒÅÄÙÄÕÝÅÇÏ ÐÏÉÓËÁ F, f, T, ÉÌÉ t" +179 "%s ÎÅ ÎÁÊÄÅÎÏ" +180 "îÅÔ ÐÒÅÄÙÄÕÝÅÇÏ ÆÁÊÌÁ ÄÌÑ ÒÅÄÁËÔÉÒÏ×ÁÎÉÑ" +181 "ëÕÒÓÏÒ ÓÔÏÉÔ ÎÅ ÎÁ ÃÉÆÒÅ" +182 "ðÏÌÕÞÅÎÎÏÅ ÞÉÓÌÏ ÓÌÉÛËÏÍ ×ÅÌÉËÏ" +183 "ðÏÌÕÞÅÎÎÏÅ ÞÉÓÌÏ ÓÌÉÛËÏÍ ÍÁÌÏ" +184 "ðÏÄÈÏÄÑÝÅÇÏ ÓÉÍ×ÏÌÁ ÎÅÔ ÎÁ ÜÔÏÊ ÓÔÒÏËÅ" +185 "ðÏÄÈÏÄÑÝÉÊ ÓÉÍ×ÏÌ ÎÅ ÎÁÊÄÅÎ" +186 "îÅÔ ÓÉÍ×ÏÌÏ× ÄÌÑ ÕÄÁÌÅÎÉÑ" +187 "äÒÕÇÏÇÏ ÜËÒÁÎÁ ÎÅ ÓÕÝÅÓÔ×ÕÅÔ" +188 "óÉÍ×ÏÌÙ ÐÏÓÌÅ ÓÔÒÏËÉ ÄÌÑ ÐÏÉÓËÁ, ÓÍÅÝÅÎÉÑ ÓÔÒÏËÉ É/ÉÌÉ ËÏÍÁÎÄÙ z" +189 "ðÒÏÛÌÙÊ ÏÂÒÁÚÅà ÐÏÉÓËÁ ÏÔÓÕÔÓÔ×ÕÅÔ" +190 "ðÏÉÓË ÚÁ×ÅÒÛÉÌÓÑ ÎÁ ÎÁÞÁÌØÎÏÊ ÐÏÚÉÃÉÉ" +191 "áÂÂÒÅ×ÉÁÔÕÒÁ ÐÒÅ×ÙÓÉÌÁ ÌÉÍÉÔ ÒÁÓÛÉÒÅÎÉÑ: ÓÉÍ×ÏÌÙ ÚÁÂÙÔÙ" +192 "óÉÍ×ÏÌ ÎÅÐÒÁ×ÉÌÅÎ; Ë×ÏÔÉÒÕÊÔÅ ÄÌÑ ××ÏÄÁ" +193 "õÖÅ ÎÁ ÎÁÞÁÌÅ ×ÓÔÁ×ËÉ" +194 "îÅÔ ÓÉÍ×ÏÌÏ× ÄÌÑ ÕÄÁÌÅÎÉÑ" +195 "ðÅÒÅÄ×ÉÖÅÎÉÅ ÚÁ ËÏÎÅà ÆÁÊÌÁ" +196 "ðÅÒÅÄ×ÉÖÅÎÉÅ ÚÁ ËÏÎÅà ÓÔÒÏËÉ" +197 "ä×ÉÖÅÎÉÅ ÓÔÒÏËÉ ÎÅ ÓÄÅÌÁÎÏ" +198 "õÖÅ ÎÁ ÎÁÞÁÌÅ ÆÁÊÌÁ" +199 "ä×ÉÖÅÎÉÅ ËÕÒÓÏÒÁ ÚÁ ÎÁÞÁÌÏ ÆÁÊÌÁ" +200 "õÖÅ × ÐÅÒ×ÏÊ ËÏÌÏÎËÅ" +201 "âÕÆÅÒÙ ÄÏÌÖÎÙ ÂÙÔØ ÕËÁÚÁÎÙ ÄÏ ×ÙÐÏÌÎÅÎÉÑ ËÏÍÁÎÄÙ" +202 "õÖÅ ÎÁ ËÏÎÃÅ ÆÁÊÌÁ" +203 "õÖÅ ÎÁ ËÏÎÃÅ ÓÔÒÏËÉ" +204 "%s ÎÅ Ñ×ÌÑÅÔÓÑ ËÏÍÁÎÄÏÊ VI" +205 "éÓÐÏÌØÚÏ×ÁÎÉÅ: %s" +206 "îÅÔ ÓÉÍ×ÏÌÏ× ÄÌÑ ÕÄÁÌÅÎÉÑ" +207 "ëÏÍÁÎÄÁ Q ÔÒÅÂÕÅÔ ex ÉÎÔÅÒÆÅÊÓ ÔÅÒÍÉÎÁÌÁ" +208 "îÅÔ ËÏÍÁÎÄÙ ÄÌÑ ÐÏ×ÔÏÒÁ" +209 "æÁÊÌ ÐÕÓÔ" +210 "ëÏÍÁÎÄÁ %s ÎÅ ÍÏÖÅÔ ÂÙÔØ ÉÓÐÏÌØÚÏ×ÁÎÁ ËÁË ËÏÍÁÎÄÁ ÐÅÒÅÍÅÝÅÎÉÑ" +211 "õÖÅ × ËÏÍÁÎÄÎÏÍ ÒÅÖÉÍÅ" +212 "ëÕÒÓÏÒ ÎÁÈÏÄÉÔÓÑ ÎÅ ÎÁ ÓÌÏ×Å" +214 "úÎÁÞÅÎÉÅ ÏÐÃÉÉ windows ÓÌÉÛËÏÍ ×ÅÌÉËÏ, ÍÁËÓÉÍÁÌØÎÏÅ ÚÎÁÞÅÎÉÅ = %u" +215 "äÏÂÁ×ÉÔØ" +216 "éÚÍÅÎÉÔØ" +217 "ëÏÍÁÎÄÁ" +218 "÷ÓÔÁ×ÉÔØ" +219 "úÁÍÅÎÉÔØ" +220 "ä×ÉÖÅÎÉÅ ËÕÒÓÏÒÁ ÚÁ ËÏÎÅà ÜËÒÁÎÁ" +221 "ä×ÉÖÅÎÉÅ ËÕÒÓÏÒÁ ÚÁ ÎÁÞÁÌÏ ÜËÒÁÎÁ" +222 "äÌÑ ÒÁÚÄÅÌÅÎÉÑ ÜËÒÁÎ ÄÏÌÖÅÎ ÂÙÔØ ÂÏÌØÛÅ ÞÅÍ ÓÔÒÏËÉ %d" +223 "ôÅÎÅ×ÙÈ ÏËÏÎ ÎÅÔ" +224 "îÅ ÓÕÝÅÓÔ×ÕÅÔ ÔÅÎÅ×ÏÇÏ ÏËÎÁ Ó ÒÅÄÁËÔÉÒÏ×ÁÎÉÅÍ ÆÁÊÌÁ %s" +225 "÷Ù ÎÅ ÍÏÖÅÔÅ ÓÄÅÌÁÔØ ÅÄÉÎÓÔ×ÅÎÎÏÅ ÏËÎÏ ÔÅÎÅ×ÙÍ" +226 "üËÒÁÎ ÍÏÖÅÔ ÂÙÔØ ÓÖÁÔ" +227 "üËÒÁÎ ÎÅ ÍÏÖÅÔ ÂÙÔØ ÓÖÁÔ ÔÏÌØËÏ ÄÏ %d ÓÔÒÏË" +228 "üËÒÁÎ ÎÅ ÍÏÖÅÔ ÂÙÔØ ÒÁÓÛÉÒÅÎ" +230 "üÔÏÔ ÜËÒÁÎ ÎÅ ÍÏÖÅÔ ÂÙÔØ ÐÒÉÏÓÔÁÎÏ×ÌÅÎ" +231 "ðÒÅÒ×ÁÎÏ: ÎÁÚÎÁÞÅÎÎÙÅ ËÌÁ×ÉÛÉ ÚÁÂÙÔÙ" +232 "vi: ×ÒÅÍÅÎÎÙÊ ÂÕÆÅÒ ÎÅ ÏÓ×ÏÂÏÖÄÅÎ" +233 "äÁÎÎÙÊ ÔÉÐ ÔÅÒÍÉÎÁÌÁ ÎÅ ÉÍÅÅÔ ËÌÁ×ÉÛÉ %s" +234 "íÏÖÅÔ ÂÙÔØ ÕËÁÚÁÎ ÔÏÌØËÏ ÏÄÉÎ ÂÕÆÅÒ" +235 "þÉÓÌÏ ÂÏÌØÛÅ ÞÅÍ %lu" +236 "ðÒÅÒ×ÁÎÏ" +237 "îÅ×ÏÚÍÏÖÎÏ ÓÏÚÄÁÔØ ×ÒÅÍÅÎÎÙÊ ÆÁÊÌ" +238 "÷ÎÉÍÁÎÉÅ: %s ÓÐÅÃÉÁÌØÎÙÊ ÆÁÊÌ" +239 "%s ÕÖÅ ÚÁÂÌÏËÉÒÏ×ÁÎ, ÄÏÓÔÕÐÅÎ ÔÏÌØËÏ ÎÁ ÞÔÅÎÉÅ" +240 "%s: ÕÄÁÌÅÎ" +241 "%s: ÚÁËÒÙÔ" +242 "%s: ÕÄÁÌÅÎ" +243 "%s: ÕÄÁÌÅÎ" +244 "æÁÊÌ ÔÏÌØËÏ ÄÌÑ ÞÔÅÎÉÑ, ÎÅ ÚÁÐÉÓÁÎ: éÓÐÏÌØÚÕÊÔÅ ! ÄÌÑ ÏÂÈÏÄÁ" +245 "æÁÊÌ ÔÏÌØËÏ ÄÌÑ ÞÔÅÎÉÑ, ÎÅ ÚÁÐÉÓÁÎ" +246 "%s ÓÕÝÅÓÔ×ÕÅÔ, ÎÅ ÚÁÐÉÓÁÎ; ÉÓÐÏÌØÚÕÊÔÅ ! ÄÌÑ ÏÂÈÏÄÁ" +247 "%s ÓÕÝÅÓÔ×ÕÅÔ, ÎÅ ÚÁÐÉÓÁÎ" +248 "éÓÐÏÌØÚÕÊÔÅ ! ÄÌÑ ÞÁÓÔÉÞÎÏÊ ÚÁÐÉÓÉ ÆÁÊÌÁ" +249 "þÁÓÔØ ÆÁÊÌÁ, ÆÁÊÌ ÎÅ ÚÁÐÉÓÁÎ" +250 "%s: æÁÊÌ ÉÚÍÅÎÑÌÓÑ ÐÏÚÄÎÅÅ, ÞÅÍ ÄÁÎÎÁÑ ËÏÐÉÑ: ÉÓÐÏÌØÚÕÊÔÅ ! ÄÌÑ ÏÂÈÏÄÁ" +251 "%s: æÁÊÌ ÉÚÍÅÎÑÌÓÑ ÐÏÚÄÎÅÅ, ÞÅÍ ÄÁÎÎÁÑ ËÏÐÉÑ" +252 "%s: ÚÁÝÉÔÁ ÎÁ ÚÁÐÉÓØ ÂÙÌÁ ÎÅÄÏÓÔÕÐÎÁ" +253 "úÁÐÉÓØ..." +254 "%s: ÷îéíáîéå: æáêì õóåþåî" +255 "õÖÅ ÐÒÉÓÕÔÓÔ×ÕÅÔ × ÐÅÒ×ÏÊ ÍÅÔËÅ ÄÁÎÎÏÊ ÇÒÕÐÐÙ" +256 "%s: ÎÏ×ÙÊ ÆÁÊÌ: %lu ÓÔÒÏË, %lu ÓÉÍ×ÏÌÏ×" +257 "%s: %lu ÓÔÒÏË, %lu ÓÉÍ×ÏÌÏ×" +258 "%s ÒÁÓÛÉÒÉÌÓÑ × ÓÌÉÛËÏÍ ÂÏÌØÛÏÅ ËÏÌÉÞÅÓÔ×Ï ÉÍÅÎ ÆÁÊÌÏ×" +259 "%s: ÓÐÅÃÉÁÌØÎÙÊ ÆÁÊÌ" +260 "%s: ÎÅ ÐÒÉÎÁÄÌÅÖÉÔ ÷ÁÍ" +261 "%s: ÄÏÓÔÕÐÅÎ ÎÅ ÔÏÌØËÏ ÷ÁÍ" +262 "æÁÊÌ ÉÚÍÅÎÅÎ ÓÏ ×ÒÅÍÅÎÉ ÐÏÓÌÅÄÎÅÊ ÚÁÐÉÓÉ: ÓÏÈÒÁÎÉÔÅ ÉÌÉ ÉÓÐÏÌØÚÕÊÔÅ ! ÄÌÑ ÏÂÈÏÄÁ" +263 "æÁÊÌ ÉÚÍÅÎÅÎ ÓÏ ×ÒÅÍÅÎÉ ÐÏÓÌÅÄÎÅÊ ÚÁÐÉÓÉ: ÓÏÈÒÁÎÉÔÅ ÉÌÉ ÉÓÐÏÌØÚÕÊÔÅ :edit ÄÌÑ ÏÂÈÏÄÁ" +264 "æÁÊÌ ÉÚÍÅÎÅÎ ÓÏ ×ÒÅÍÅÎÉ ÐÏÓÌÅÄÎÅÊ ÚÁÐÉÓÉ: ÓÏÈÒÁÎÉÔÅ ÉÌÉ ÉÓÐÏÌØÚÕÊÔÅ ! ÄÌÑ ÏÂÈÏÄÁ" +265 "æÁÊÌ ×ÒÅÍÅÎÎÙÊ: ×ÙÈÏÄ ÓÏÔÒÅÔ ÌÀÂÙÅ ÉÚÍÅÎÅÎÉÑ" +266 "æÁÊÌ ÔÏÌØËÏ ÄÌÑ ÞÔÅÎÉÑ, Á×ÔÏÚÁÐÉÓØ ÎÅ ÓÒÁÂÏÔÁÌÁ" +267 "úÁÐÉÓÉ ÎÁÞÁÔÙ ÚÁÎÏ×Ï" +268 "ÐÏÄÔ×ÅÒÄÉÔØ? [ynq]" +269 "îÁÖÍÉÔÅ ÌÀÂÕÀ ËÌÁ×ÉÛÕ ÞÔÏÂÙ ÐÒÏÄÏÌÖÉÔØ: " +270 "îÁÖÍÉÔÅ ÌÀÂÕÀ ËÌÁ×ÉÛÕ ÞÔÏÂÙ ÐÒÏÄÏÌÖÉÔØ [: ÞÔÏÂÙ ××ÅÓÔÉ ÅÝÅ ex ËÏÍÁÎÄÙ]: " +271 "îÁÖÍÉÔÅ ÌÀÂÕÀ ËÌÁ×ÉÛÕ ÞÔÏÂÙ ÐÒÏÄÏÌÖÉÔØ [q ÞÔÏÂÙ ×ÙÊÔÉ]: " +272 "üÔÁ ÆÏÒÍÁ %s ÔÒÅÂÕÅÔ ex ÉÎÔÅÒÆÅÊÓ ÔÅÒÍÉÎÁÌÁ" +273 "÷ÈÏÄ × ÒÅÖÉÍ ××ÏÄÁ ex." +274 "ëÏÍÁÎÄÁ ÎÅ ÕÄÁÌÁÓØ, ÆÁÊÌ ÅÝÅ ÎÅ ÐÒÏÞÔÅÎ." +275 " ÐÒÏÄ?" +276 "îÅÏÖÉÄÁÎÎÏÅ ÓÉÍ×ÏÌØÎÏÅ ÓÏÂÙÔÉÅ" +277 "îÅÏÖÉÄÁÎÎÏÅ ÓÏÂÙÔÉÅ 'ËÏÎÅà ÆÁÊÌÁ'" +278 "ðÏ ÚÁÐÒÏÓÕ ÓÏ×ÐÁÄÅÎÉÊ ÎÅÔ" +279 "îÅÏÖÉÄÁÎÎÏÅ ÓÏÂÙÔÉÅ ÐÒÅÒÙ×ÁÎÉÑ" +280 "îÅÏÖÉÄÁÎÎÏÅ ÓÏÂÙÔÉÅ ×ÙÈÏÄÁ" +281 "îÅÏÖÉÄÁÎÎÏÅ ÓÏÂÙÔÉÅ ÐÅÒÅÒÉÓÏ×ËÉ" +282 "õÖÅ ÐÒÉÓÕÔÓÔ×ÕÅÔ × ÐÏÓÌÅÄÎÅÊ ÍÅÔËÅ ÄÁÎÎÏÊ ÇÒÕÐÐÙ" +283 "ëÏÍÁÎÄÁ %s ÔÒÅÂÕÅÔ ex ÉÎÔÅÒÆÅÊÓ ÔÅÒÍÉÎÁÌÁ" +284 "üÔÁ ÆÏÒÍÁ %s ÎÅ ÐÏÄÄÅÒÖÉ×ÁÅÔÓÑ ÐÏËÁ ÕÓÔÁÎÏ×ÌÅÎÁ ÏÐÃÉÑ ÂÅÚÏÐÁÓÎÏÇÏ ÒÅÄÁËÔÉÒÏ×ÁÎÉÑ" +285 "îÅÏÖÉÄÁÎÎÏÅ ÓÔÒÏËÏ×ÏÅ ÓÏÂÙÔÉÅ" +286 "îÅÏÖÉÄÁÎÎÏÅ ÓÏÂÙÔÉÅ ÔÁÊÍÁÕÔÁ" +287 "îÅÏÖÉÄÁÎÎÏÅ ÓÏÂÙÔÉÅ ÚÁÐÉÓÉ" +288 "äÌÑ ÒÁÚÄÅÌÅÎÉÑ ÜËÒÁÎ ÄÏÌÖÅÎ ÂÙÔØ ÂÏÌØÛÅ ÞÅÍ ÓÔÏÌÂÃÙ %d" +289 "Shell ÒÁÓÛÉÒÅÎÉÑ ÎÅ ÐÏÄÄÅÒÖÉ×ÁÀÔÓÑ ÐÏËÁ ÕÓÔÁÎÏ×ÌÅÎÁ ÏÐÃÉÑ ÂÅÚÏÐÁÓÎÏÇÏ ÒÅÄÁËÔÉÒÏ×ÁÎÉÑ" +290 "ëÏÍÁÎÄÁ %s ÎÅ ÐÏÄÄÅÒÖÉ×ÁÅÔÓÑ ÐÏËÁ ÕÓÔÁÎÏ×ÌÅÎÁ ÏÐÃÉÑ ÂÅÚÏÐÁÓÎÏÇÏ ÒÅÄÁËÔÉÒÏ×ÁÎÉÑ" +291 "set: ÏÐÃÉÑ %s ÎÅ ÍÏÖÅÔ ÂÙÔØ ×ÙËÌÀÞÅÎÁ" +292 "üËÒÁÎ ÓÌÉÛËÏÍ ÍÁÌ" +293 "ÄÏÂÁ×ÌÅÎÏ" +294 "ÉÚÍÅÎÅÎÏ" +295 "ÕÄÁÌÅÎÏ" +296 "ÐÒÉÓÏÅÄÉÎÅÎÏ" +297 "ÐÅÒÅÍÅÝÅÎÏ" +298 "ÓÍÅÝÅÎÏ" +299 "ÓËÏÐÉÒÏ×ÁÎÏ" +300 "ÓÔÒÏËÁ" +301 "ÓÔÒÏËÉ" +303 "æÁÊÌ ÉÚÍÅÎÅÎ Ó ÍÏÍÅÎÔÁ ÐÏÓÌÅÄÎÅÊ ÚÁÐÉÓÉ." +304 "Shell ÒÁÓÛÉÒÅÎÉÅ ÎÅ ÕÄÁÌÏÓØ" +305 "îÅÔ ÕËÁÚÁÎÎÏÊ %s ÏÐÃÉÉ ÒÅÄÁËÔÉÒÏ×ÁÎÉÑ" +307 "îÅÔ ex ËÏÍÁÎÄÙ ÄÌÑ ×ÙÐÏÌÎÅÎÉÑ" +308 "÷×ÅÄÉÔÅ <CR> ÄÌÑ ×ÙÐÏÌÎÅÎÉÑ ËÏÍÁÎÄÙ, :q ÞÔÏÂÙ ×ÙÊÔÉ" +309 "éÓÐÏÌØÚÕÊÔÅ \"cscope help\" ÄÌÑ ÐÏÍÏÝÉ" +310 "îÅÔ ÚÁÐÕÝÅÎÎÏÇÏ cscope ÓÏÅÄÉÎÅÎÉÑ" +311 "%s: ÎÅÉÚ×ÅÓÔÎÙÊ ÔÉÐ ÐÏÉÓËÁ: ÉÓÐÏÌØÚÕÊÔÅ ÏÄÉÎ ÉÚ %s" +312 "%d: ÎÅÔ ÔÁËÏÇÏ cscope ÓÅÁÎÓÁ" +313 "set: %s ÏÐÃÉÑ ÎÉËÏÇÄÁ ÎÅ ÍÏÖÅÔ ÂÙÔØ ×ËÌÀÞÅÎÁ" +314 "set: %s ÏÐÃÉÑ ÎÉËÏÇÄÁ ÎÅ ÍÏÖÅÔ ÂÙÔØ ÕÓÔÁÎÏ×ÌÅÎÁ × 0" +315 "%s: ÄÏÂÁ×ÌÅÎÏ: %lu ÓÔÒÏË, %lu ÓÉÍ×ÏÌÏ×" +316 "îÅÏÖÉÄÁÎÎÏÅ ÓÏÂÙÔÉÅ ÉÚÍÅÎÅÎÉÑ ÒÁÚÍÅÒÁ" +317 "%d ÆÁÊÌÏ× ÄÌÑ ÒÅÄÁËÔÉÒÏ×ÁÎÉÑ" +319 "%d ÜËÒÁÎÏ× × ÆÏÎÏ×ÏÍ ÒÅÖÉÍÅ; ÉÓÐÏÌØÚÕÊÔÅ :display ÞÔÏÂÙ ÐÅÒÅÞÉÓÌÉÔØ ÉÈ" +320 "îÅÉÚ×ÅÓÔÎÁÑ ÐÏÚÉÃÉÑ ËÕÒÓÏÒÁ" +321 "ðÒÅÏÂÒÁÚÏ×ÁÎÉÅ ËÏÄÉÒÏ×ËÉ ÆÁÊÌÏ× ÎÅ ÐÏÄÄÅÒÖÉ×ÁÅÔÓÑ" +322 "ðÒÅÏÂÒÁÚÏ×ÁÎÉÅ ËÏÄÉÒÏ×ËÉ ××ÏÄÁ ÎÅ ÐÏÄÄÅÒÖÉ×ÁÅÔÓÑ" +323 "îÅ×ÅÒÎÙÊ ××ÏÄ. õÓÅÞÅÎÏ." +324 "ïÛÉÂËÁ ÐÒÅÏÂÒÁÚÏ×ÁÎÉÑ × ÓÔÒÏËÅ %d" diff --git a/catalog/ru_RU.KOI8-R.check b/catalog/ru_RU.KOI8-R.check deleted file mode 100644 index ca77b891051a..000000000000 --- a/catalog/ru_RU.KOI8-R.check +++ /dev/null @@ -1,169 +0,0 @@ -Unused message id's (this is okay): -001 -008 -021 -022 -023 -024 -025 -026 -027 -028 -029 -036 -037 -057 -061 -078 -081 -090 -091 -093 -110 -145 -147 -161 -164 -167 -169 -191 -207 -209 -212 -213 -215 -216 -217 -218 -219 -222 -229 -230 -231 -232 -234 -235 -236 -253 -255 -266 -========================= -MISSING ERROR MESSAGES (Please add!): -008 -021 -022 -023 -024 -025 -026 -027 -028 -029 -036 -037 -057 -061 -078 -090 -091 -093 -110 -145 -147 -161 -164 -167 -169 -191 -207 -209 -212 -215 -216 -217 -218 -219 -222 -230 -231 -232 -234 -235 -236 -253 -255 -266 -268 -269 -270 -271 -272 -273 -274 -275 -276 -277 -278 -279 -280 -281 -282 -283 -284 -285 -286 -287 -289 -290 -291 -292 -293 -294 -295 -296 -297 -298 -299 -300 -301 -302 -303 -304 -305 -306 -307 -308 -309 -310 -311 -312 -313 -314 -315 -316 -317 -========================= -Extra error messages (just delete them): -047 -050 -051 -052 -176 -========================= -MESSAGES WITH THE SAME MESSAGE ID's (FIX!): -========================= -Duplicate messages, both id and message (this is okay): -========================= -Duplicate messages, just message (this is okay): - 2 %s RAS[IRILSQ W SLI[KOM BOLX[OE KOLI^ESTWO IMEN FAJLOWX - 2 %s SU]ESTWUET, NE ZAPISAN; ISPOLXZUJTE ! DLQ OBHODAX - 2 %s: %lu STROK, %lu SIMWOLOWX - 2 %s: NE DO KONCA WOSSTANOWLENNYJ FAJLX - 2 bUFER %s PUSTX - 2 fAJL IZMENEN SO WREMENI POSLEDNEJ ZAPISI: SOHRANITE ILI ISPOLXZUJTE ! DLQ OBHODAX - 2 set: %s OPCIQ NE QWLQETSQ DWOI^NOJX - 2 zAPISI NE WELISX, NEWOZMOVNO OTMENITX POSLEDN@@ KOMANDUX - 3 %s: UDALENX - 3 nET SIMWOLOW DLQ UDALENIQX - 4 iSPOLXZOWANIE: %sX -========================= diff --git a/catalog/ru_RU.KOI8-R.owner b/catalog/ru_RU.KOI8-R.owner index bf4fa180298c..20ab08c2d5e2 100644 --- a/catalog/ru_RU.KOI8-R.owner +++ b/catalog/ru_RU.KOI8-R.owner @@ -1 +1,3 @@ -Dima Ruban <dima@demos.su> +Andrey A. Chernov <ache@nagual.ru> +Dima Ruban <dima@rdy.com> +Pavel Timofeev <timp87@gmail.com> diff --git a/catalog/ru_SU.KOI8-R b/catalog/ru_SU.KOI8-R deleted file mode 100644 index 7eb35b9cf262..000000000000 --- a/catalog/ru_SU.KOI8-R +++ /dev/null @@ -1,267 +0,0 @@ -VI_MESSAGE_CATALOG -pEREPOLNENIE ZNA^ENIQ DLINY STROKIX -%s/%d: NEWOZMOVNO UDALITX STROKU %uX -%s/%d: NEWOZMOVNO DOBAWITX K STROKE %uX -%s/%d: NEWOZMOVNO WSTAWITX W STROKU %uX -%s/%d: NEWOZMOVNO SOHRANITX STROKU %uX -%s/%d: NEWOZMOVNO DOSTATX POSLEDN@@ STROKUX - -fAJL ZAPISEJX -zAPISI NE WELISX, NEWOZMOVNO OTMENITX POSLEDN@@ KOMANDUX -nET IZMENENIJ DLQ OTMENYX -zAPISI NE WELISX, NEWOZMOVNO OTMENITX POSLEDN@@ KOMANDUX -zAPISI NE WELISX, NEWOZMOVNO PROSMOTRETX WPEREDX -nET IZMENENIJ DLQ PEREDELKIX -%s/%d: O[IBKA PRI ZAPISI PROTOKOLAX -sTANDARTNYJ WWOD/WYWOD DLQ VI DOLVEN BYTX TERMINALX -oTMETKA %s: NE USTANOWLENAX -oTMETKA %s: STROKA BYLA UDALENAX -oTMETKA %s: POZICII KURSORA BOLX[E NE SU]ESTWUETX -o[IBKA:X - - - - - - - - - -fAJL %s NE QWLQETSQ KATALOGOM SOOB]ENIJX -nEWOZMOVNO USTANOWITX OPCI@ %s PO UMOL^ANI@X -iSPOLXZOWANIE: %sX -oPCII %s NET: 'set all' POKAZYWAET WSE WOZMOVNYE OPCIIX -set: [no]%s NE PRINIMAET TAKOGO ZNA^ENIQX -set: %s OPCIQ NE QWLQETSQ DWOI^NOJX - - -set: NEPRAWILXNOE ZNA^ENIE %sX -set: %s OPCIQ NE QWLQETSQ DWOI^NOJX -kOLI^ESTWO KOLONOK \KRANA SLI[KOM MALO, MENX[E ^EM %dX -kOLI^ESTWO KOLONOK \KRANA SLI[KOM WELIKO, BOLX[E ^EM %dX -kOLI^ESTWO STROK \KRANA SLI[KOM MALO, MENX[E ^EM %dX -kOLI^ESTWO STROK \KRANA SLI[KOM WELIKO, BOLX[E ^EM %dX -oPCIQ lisp OTSUTSTWUETX -sOOB]ENIQ NE WYKL@^ENY: %sX -sOOB]ENIQ NE WKL@^ENY: %sX -oPCIQ modeline(s) NE MOVET BYTX PEREUSTANOWLENAX -oPCIQ paragraph DOLVNA SOSTOQTX IZ GRUPP S DWUMQ SIMWOLAMIX -oPCIQ section DOLVNA SOSTOQTX IZ GRUPP S DWUMQ SIMWOLAMIX -oPCIQ shiftwidth NE MOVET BYTX USTANOWLENA NA 0X -oPCIQ sourceany NE MOVET BYTX USTANOWLENAX -tABULQCIQ NE MOVET BYTX USTANOWLENA NA 0X -sTARTOWYJ BUFER PUSTX -bUFER %s PUSTX -fAJLY S SIMWOLAMI PEREWODA STROKI W IMENI NE MOGUT BYTX WOSSTANOWLENYX -iZMENENIQ NE SOHRANENY PRI KRAHE SESSIIX - -sOHRANENIE NE UDALOSX: %sX -iZMENENIQ NE SOHRANQ@TSQ PRI OBRYWE SESSIIX -sOHRANENIE KOPII FAJLA NE UDALOSX: %sX - -iNFORMACII NA POLXZOWATELQ %u NE NAJDENOX -nEWOZMOVNO ZA]ITITX SPASENNYJ FAJLX -bUFER WOSSTANOWLENNOGO FAJLA PEREPOLNENX -wOSSTANOWLENNYJ FAJLX -%s: NE DO KONCA WOSSTANOWLENNYJ FAJLX -%s: NE DO KONCA WOSSTANOWLENNYJ FAJLX -fAJLOW S IMENEM %s, KOTORYE wY MOVETE ^ITATX, NE SU]ESTWUETX -eSTX STARYE WERSII FAJLA, KOTORYE MOVNO WOSSTANOWITXX -sU]ESTWU@T DRUGIE FAJLY, KOTORYE MOVNO WOSSTANOWITXX -E-mail NE POSLAN: %sX -fAJL PUST - ISKATX NE^EGOX -dOSTIGNUT KONEC FAJLA BEZ NAHOVDENIQ OBRAZCA POISKAX -nE ZADAN OBRAZEC POISKAX -oBRAZEC POISKA NE NAJDENX -dOSTUPNO NA^ALO FAJLA BEZ NAHOVDENIQ OBRAZCA POISKAX -pOISK ZACIKLENX - -nEPE^ATNYH SIMWOLOW NE NAJDENOX -nEIZWESTNAQ KOMANDAX - -kOMANDA NE DOSTUPNA W REVIME exX -s^ET^IK NE MOVET BYTX NULEMX -%s: NEPRAWILXNOE UKAZANIE STROKIX -wNUTRENNQQ O[IBKA W SINTAKSISE (%s: %s)X -iSPOLXZOWANIE: %sX -%s: WREMENNYJ BUFER NE ISPOLXZOWANX -mETKA POSTAWLENA PERED STROKOJ 1X -mETKA POSTAWLENA POSLE KONCA FAJLAX - - -kOMANDA ex NE UDALASX: PARAMETRY KOMANDY ZABYTYX - -wTOROJ ADRES MENX[E ^EM PERWYJX -nE UKAZANO NAZWANIE OTMETKIX -\\ NE ZAWER[AETSQ / ILI ?X -sSYLKA K STROKE S NOMEROM MENX[E 0X -kOMANDA %s NEIZWESTNAX -pEREPOLNENIE ZNA^ENIQ ADRESAX -nEDOBOR ZNA^ENIQ ADRESAX -nEDOPUSTIMAQ KOMBINACIQ W ADRESEX -nEPRAWILXNYJ ADRES: WSEGO %lu STROK W FAJLEX -nEPRAWILXNYJ ADRES: FAJL PUSTX -kOMMANDA %s NE MOVET ISPOLXZOWATX ADRES 0X -aBBREWIATURY OTSUTSTWU@TX -aBBREWIATURY DOLVNY ZAKAN^IWATXSQ SIMWOLOM "word"X -aBBREWIATURY NE MOGUT SODERVATX SIMWOLOY TABLQCII ILI PROBELYX -aBBREWIATURY NE MOGUT SO^ETATXSQ S SIMWOLAMI SLOW/NE-SLOW, ZA ISKL@^ENIEM KONCA STROKIX -"%s" NE QWLQETSQ ABBREWIATUROJX - -fAJLOW DLQ REDAKTIROWANIQ BOLX[E NETX -oTSUTSTWIE PREDYDU]EGO FAJLA DLQ REDAKTIROWANIQX -oTSUTSTWIE PREDYDU]EGO FAJLA DLQ PROSMOTRA NAZADX -nET FAJLOWX -oTSUTSTWIE PREDYDU]EJ KOMANDY DLQ ZAMENY "!"X -oTSUTSTWIE ZAMENY DLQ %%X -oTSUTSTWIE ZAMENY DLQ #X -o[IBKA: execl: %sX -o[IBKA WWODA/WYWODA: %sX -fAJL IZMENEN S MOMENTA POSLEDNEJ POLNOJ ZAPISI: ISPOLXZUJTE ! DLQ OBHODAX -nEWOZMOVNO NAJTI DOMA[NIJ KATALOGX -nOWYJ KATALOG: %sX -nET WYREZANYH BUFEROWX -kOMANDA %s NE MOVET BYTX ISPOLXZOWANA WNUTRI OB]EJ KOMANDYX -%s/%s: NE OTKRYT: NE PRINADLEVIT wAM ILI root-UX -%s/%s: NE OTKRYT: NE PRINADLEVIT wAMX -%s/%s: NE OTKRYT: WOZMOVNOSTX ZAPISI U POLXZOWATELQ, NE QWLQ@]EGOSQ WLADELXCEMX -%s/%s: NE S^ITAN: NE PRINADLEVIT wAM ILI root-UX -%s/%s: NE S^ITAN: NE PRINADLEVIT wAMX -%s/%s: NE S^ITAN: WOZMOVNOSTX ZAPISI U POLXZOWATELQ, NE QWLQ@]EGOSQ WLADELXCEMX -pOSLEDU@]IE STROKI OTSUTSTWU@TX -oTSUTSTWIE PARAMETROW WWODAX -oTSUTSTWIE PARAMETROW KOMANDYX -sIMWOL %s NE MOVET BYTX PEREZAPOMNENX -"%s" NA DANNYJ MOMENT NE OTME^ENX -iMQ METKI DOLVNO BYTX ODNIM SIMWOLOMX -%s SU]ESTWUET, NE ZAPISAN; ISPOLXZUJTE ! DLQ OBHODAX -nOWYJ FAJL .exrc: %sX -sTROKA PERENOSA NAHODITSQ WNUTRI PARAMETROW PERENOSAX -kOMANDA open PODRAZUMEWAET USTANOWKU OPCII openX -kOMANDA open NE REALIZOWANAX -zA]ITA FAJLA NEWOZMOVNAX -fAJL ZA]I]ENX -%s RAS[IRILSQ W SLI[KOM BOLX[OE KOLI^ESTWO IMEN FAJLOWX - -%s: ZA]ITA NA ^TENIE BYLA NEDOSTUPNAX - -%s: %lu STROK, %lu SIMWOLOWX -nET TENEWYH OKONX -kOMANDA script ISPOLXZUETSQ TOLXKO W REVIME viX -nET KOMANDY DLQ ISPOLNENIQX -oPCIQ shiftwidth USTANOWLENA NA 0X -pEREPOLNENIE S^ET^IKAX -cIKL WYPOLNEN NE DO KONCAX -uKAZANO REGULQRNOE WYRAVENIE: FLAG r NE NUVENX -fLAGI #, l I p NE MOGUT BYTX OB_EDINENY S FLAGOM c W REVIME viX -sOWPADENIJ NETX -mETKA OTSUTSTWUETX -w STEKE METOK ZAPISEJ MENX[E, ^EM %s, ISPOLXZUJTE :display t[ags]X -fAJLA S IMENEM %s W STEKE METOK NET; ISPOLXZUJTE :display t[ags]X - -%s: METKA NE NAJDENAX -%s: PLOHAQ METKA W %sX - -sTEK METOK PUSTX -%s: ISKOMAQ PEREMENNAQ NE NAJDENAX - -bUFER %s PUSTX - -pRERWANOX -oTSUTSTWIE BUFERA DLQ ISPOLXZOWANIQX -nET PREDIDU]EGO REGULQRNOGO WYRAVENIQX -kOMANDA %s PODRAZUMEWAET NALI^IE PRO^TENNOGO FAJLAX -iSPOLXZOWANIE: %sX -kOMANDA visual PODRAZUMEWAET OBQZATELXNU@ USTANOWKU OPCII openX -%s RAS[IRILSQ DO SLI[KOM BOLX[OGO KOLI^ESTWA FAJLOWX -pUSTOJ FAJLX -nET PREDYDU]EGO POISKA F, f, T, ILI tX -%s NE NAJDENOX -nET PREDYDU]EGO FAJLA DLQ REDAKTIROWANIQX -kURSOR STOIT NE NA CIFREX -pOLU^ENNOE ^ISLO SLI[KOM WELIKOX -pOLU^ENNOE ^ISLO SLI[KOM MALOX -pODHODQ]EGO SIMWOLA NET NA \TOJ STROKEX -pODHODQ]IJ SIMWOL NE NAJDENX -nET SIMWOLOW DLQ UDALENIQX -dRUGOGO \KRANA NE SU]ESTWUETX -sIMWOLY POSLE STROKI DLQ POISKA I/ILI PEREBOR STROKIX -pRO[LYJ OBRAZEC POISKA OTSUTSTWUETX -pOISK ZAWER[ILSQ NA NA^ALXNOJ POZICIIX - -sIMWOL NEPRAWILEN; ZAKL@^EN W KAWY^KI DLQ WWODAX -uVE NA NA^ALE WSTAWKIX -nET SIMWOLOW DLQ UDALENIQX -pEREDWIVENIE ZA KONEC FAJLAX -pEREDWIVENIE ZA KONEC STROKIX -dWIVENIE STROKI NE SDELANOX -uVE NA NA^ALE FAJLAX -dWIVENIE KURSORA ZA NA^ALO FAJLAX -uVE W PERWOJ KOLONKEX -bUFERY DOLVNY BYTX UKAZANY DO WYPOLNENIQ KOMANDYX -uVE NA KONCE FAJLAX -uVE NA KONSE STROKIX -%s NE QWLQETSQ KOMANDOJ VIX -iSPOLXZOWANIE: %sX -nET SIMWOLOW DLQ UDALENIQX - -nET KOMANDY DLQ POWTORAX - -kOMANDA %s NE MOVET BYTX ISPOLXZOWANA KAK KOMANDA PRODWIVENIQX -~ISLO BOLX[E ^EM %luX - - -zNA^ENIE KOLI^ESTWA OKON SLI[KOM WELIKO, MAKSIMALXNOE ZNA^ENIE = %uX - - - - - -dWIVENIE KURSORA ZA KONEC \KRANAX -dWIVENIE KURSORA ZA NA^ALO \KRANAX - -tENEWYH OKON NETX -nE SU]ESTWUET TENEWOGO OKNA S REDAKTIROWANIEM FAJLA %sX -wY NE MOVETE SDELATX EDINSTWENNOE OKNO TENEWYMX -|KRAN MOVET BYTX SVATX -|KRAN NE MOVET BYTX SVATX -|KRAN NE MOVET BYTX RAS[IRENX - - - - -dANNYJ TIP TERMINALA NE IMEET KLAWI[I %sX - - - -nEWOZMOVNO SOZDATX WREMENNYJ FAJLX -wNIMANIE: %s SPECIALXNYJ FAJLX -%s UVE ZABLOKIROWAN, DOSTUPEN TOLXKO NA ^TENIEX -%s: UDALENX -%s: ZAKRYTX -%s: UDALENX -%s: UDALENX -fAJL TOLXKO DLQ ^TENIQ, NE ZAPISAN: iSPOLXZUJTE ! DLQ OBHODAX -fAJL TOLXKO DLQ ^TENIQ, NE ZAPISANX -%s SU]ESTWUET, NE ZAPISAN; ISPOLXZUJTE ! DLQ OBHODAX -%s SU]ESTWUET, NE ZAPISANX -iSPOLXZUJTE ! DLQ ^ASTI^NOJ ZAPISI FAJLAX -~ASTX FAJLA, FAJL NE ZAPISANX -%s: fAJL IZMENQLSQ POZDNEE, ^EM DANNAQ KOPIQ: ISPOLXZUJTE ! DLQ OBHODAX -%s: fAJL IZMENQLSQ POZDNEE, ^EM DANNAQ KOPIQX -%s: ZA]ITA NA ZAPISX BYLA NEDOSTUPNAX - -%s: wnimanie: fajl use~enX - -%s: NOWYJ FAJL: %lu STROK, %lu SIMWOLOWX -%s: %lu STROK, %lu SIMWOLOWX -%s RAS[IRILSQ W SLI[KOM BOLX[OE KOLI^ESTWO IMEN FAJLOWX -%s SPECIALXNYJ FAJLX -%s: NE PRINADLEVIT wAMX -%s: DOSTUPEN NE TOLXKO wAMX -fAJL IZMENEN SO WREMENI POSLEDNEJ ZAPISI: SOHRANITE ILI ISPOLXZUJTE ! DLQ OBHODAX -fAJL IZMENEN SO WREMENI POSLEDNEJ ZAPISI: SOHRANITE ILI ISPOLXZUJTE :edit DLQ OBHODAX -fAJL IZMENEN SO WREMENI POSLEDNEJ ZAPISI: SOHRANITE ILI ISPOLXZUJTE ! DLQ OBHODAX -fAJL WREMENNYJ: WYHOD SOTRET L@BYE IZMENENIQX - -zAPISI NA^ATY ZANOWOX diff --git a/catalog/ru_SU.KOI8-R.base b/catalog/ru_SU.KOI8-R.base deleted file mode 100644 index 59efd3f53a5f..000000000000 --- a/catalog/ru_SU.KOI8-R.base +++ /dev/null @@ -1,219 +0,0 @@ -002 "pEREPOLNENIE ZNA^ENIQ DLINY STROKI" -003 "%s/%d: NEWOZMOVNO UDALITX STROKU %u" -004 "%s/%d: NEWOZMOVNO DOBAWITX K STROKE %u" -005 "%s/%d: NEWOZMOVNO WSTAWITX W STROKU %u" -006 "%s/%d: NEWOZMOVNO SOHRANITX STROKU %u" -007 "%s/%d: NEWOZMOVNO DOSTATX POSLEDN@@ STROKU" -009 "fAJL ZAPISEJ" -010 "zAPISI NE WELISX, NEWOZMOVNO OTMENITX POSLEDN@@ KOMANDU" -011 "nET IZMENENIJ DLQ OTMENY" -012 "zAPISI NE WELISX, NEWOZMOVNO OTMENITX POSLEDN@@ KOMANDU" -013 "zAPISI NE WELISX, NEWOZMOVNO PROSMOTRETX WPERED" -014 "nET IZMENENIJ DLQ PEREDELKI" -015 "%s/%d: O[IBKA PRI ZAPISI PROTOKOLA" -016 "sTANDARTNYJ WWOD/WYWOD DLQ VI DOLVEN BYTX TERMINAL" -017 "oTMETKA %s: NE USTANOWLENA" -018 "oTMETKA %s: STROKA BYLA UDALENA" -019 "oTMETKA %s: POZICII KURSORA BOLX[E NE SU]ESTWUET" -020 "o[IBKA:" -030 "fAJL %s NE QWLQETSQ KATALOGOM SOOB]ENIJ" -031 "nEWOZMOVNO USTANOWITX OPCI@ %s PO UMOL^ANI@" -032 "iSPOLXZOWANIE: %s" -033 "oPCII %s NET: 'set all' POKAZYWAET WSE WOZMOVNYE OPCII" -034 "set: [no]%s NE PRINIMAET TAKOGO ZNA^ENIQ" -035 "set: %s OPCIQ NE QWLQETSQ DWOI^NOJ" -038 "set: NEPRAWILXNOE ZNA^ENIE %s" -039 "set: %s OPCIQ NE QWLQETSQ DWOI^NOJ" -040 "kOLI^ESTWO KOLONOK \KRANA SLI[KOM MALO, MENX[E ^EM %d" -041 "kOLI^ESTWO KOLONOK \KRANA SLI[KOM WELIKO, BOLX[E ^EM %d" -042 "kOLI^ESTWO STROK \KRANA SLI[KOM MALO, MENX[E ^EM %d" -043 "kOLI^ESTWO STROK \KRANA SLI[KOM WELIKO, BOLX[E ^EM %d" -044 "oPCIQ lisp OTSUTSTWUET" -045 "sOOB]ENIQ NE WYKL@^ENY: %s" -046 "sOOB]ENIQ NE WKL@^ENY: %s" -047 "oPCIQ modeline(s) NE MOVET BYTX PEREUSTANOWLENA" -048 "oPCIQ paragraph DOLVNA SOSTOQTX IZ GRUPP S DWUMQ SIMWOLAMI" -049 "oPCIQ section DOLVNA SOSTOQTX IZ GRUPP S DWUMQ SIMWOLAMI" -050 "oPCIQ shiftwidth NE MOVET BYTX USTANOWLENA NA 0" -051 "oPCIQ sourceany NE MOVET BYTX USTANOWLENA" -052 "tABULQCIQ NE MOVET BYTX USTANOWLENA NA 0" -053 "sTARTOWYJ BUFER PUST" -054 "bUFER %s PUST" -055 "fAJLY S SIMWOLAMI PEREWODA STROKI W IMENI NE MOGUT BYTX WOSSTANOWLENY" -056 "iZMENENIQ NE SOHRANENY PRI KRAHE SESSII" -058 "sOHRANENIE NE UDALOSX: %s" -059 "iZMENENIQ NE SOHRANQ@TSQ PRI OBRYWE SESSII" -060 "sOHRANENIE KOPII FAJLA NE UDALOSX: %s" -062 "iNFORMACII NA POLXZOWATELQ %u NE NAJDENO" -063 "nEWOZMOVNO ZA]ITITX SPASENNYJ FAJL" -064 "bUFER WOSSTANOWLENNOGO FAJLA PEREPOLNEN" -065 "wOSSTANOWLENNYJ FAJL" -066 "%s: NE DO KONCA WOSSTANOWLENNYJ FAJL" -067 "%s: NE DO KONCA WOSSTANOWLENNYJ FAJL" -068 "fAJLOW S IMENEM %s, KOTORYE wY MOVETE ^ITATX, NE SU]ESTWUET" -069 "eSTX STARYE WERSII FAJLA, KOTORYE MOVNO WOSSTANOWITX" -070 "sU]ESTWU@T DRUGIE FAJLY, KOTORYE MOVNO WOSSTANOWITX" -071 "E-mail NE POSLAN: %s" -072 "fAJL PUST - ISKATX NE^EGO" -073 "dOSTIGNUT KONEC FAJLA BEZ NAHOVDENIQ OBRAZCA POISKA" -074 "nE ZADAN OBRAZEC POISKA" -075 "oBRAZEC POISKA NE NAJDEN" -076 "dOSTUPNO NA^ALO FAJLA BEZ NAHOVDENIQ OBRAZCA POISKA" -077 "pOISK ZACIKLEN" -079 "nEPE^ATNYH SIMWOLOW NE NAJDENO" -080 "nEIZWESTNAQ KOMANDA" -082 "kOMANDA NE DOSTUPNA W REVIME ex" -083 "s^ET^IK NE MOVET BYTX NULEM" -084 "%s: NEPRAWILXNOE UKAZANIE STROKI" -085 "wNUTRENNQQ O[IBKA W SINTAKSISE (%s: %s)" -086 "iSPOLXZOWANIE: %s" -087 "%s: WREMENNYJ BUFER NE ISPOLXZOWAN" -088 "mETKA POSTAWLENA PERED STROKOJ 1" -089 "mETKA POSTAWLENA POSLE KONCA FAJLA" -092 "kOMANDA ex NE UDALASX: PARAMETRY KOMANDY ZABYTY" -094 "wTOROJ ADRES MENX[E ^EM PERWYJ" -095 "nE UKAZANO NAZWANIE OTMETKI" -096 "\\ NE ZAWER[AETSQ / ILI ?" -097 "sSYLKA K STROKE S NOMEROM MENX[E 0" -098 "kOMANDA %s NEIZWESTNA" -099 "pEREPOLNENIE ZNA^ENIQ ADRESA" -100 "nEDOBOR ZNA^ENIQ ADRESA" -101 "nEDOPUSTIMAQ KOMBINACIQ W ADRESE" -102 "nEPRAWILXNYJ ADRES: WSEGO %lu STROK W FAJLE" -103 "nEPRAWILXNYJ ADRES: FAJL PUST" -104 "kOMMANDA %s NE MOVET ISPOLXZOWATX ADRES 0" -105 "aBBREWIATURY OTSUTSTWU@T" -106 "aBBREWIATURY DOLVNY ZAKAN^IWATXSQ SIMWOLOM "word"" -107 "aBBREWIATURY NE MOGUT SODERVATX SIMWOLOY TABLQCII ILI PROBELY" -108 "aBBREWIATURY NE MOGUT SO^ETATXSQ S SIMWOLAMI SLOW/NE-SLOW, ZA ISKL@^ENIEM KONCA STROKI" -109 ""%s" NE QWLQETSQ ABBREWIATUROJ" -111 "fAJLOW DLQ REDAKTIROWANIQ BOLX[E NET" -112 "oTSUTSTWIE PREDYDU]EGO FAJLA DLQ REDAKTIROWANIQ" -113 "oTSUTSTWIE PREDYDU]EGO FAJLA DLQ PROSMOTRA NAZAD" -114 "nET FAJLOW" -115 "oTSUTSTWIE PREDYDU]EJ KOMANDY DLQ ZAMENY "!"" -116 "oTSUTSTWIE ZAMENY DLQ %%" -117 "oTSUTSTWIE ZAMENY DLQ #" -118 "o[IBKA: execl: %s" -119 "o[IBKA WWODA/WYWODA: %s" -120 "fAJL IZMENEN S MOMENTA POSLEDNEJ POLNOJ ZAPISI: ISPOLXZUJTE ! DLQ OBHODA" -121 "nEWOZMOVNO NAJTI DOMA[NIJ KATALOG" -122 "nOWYJ KATALOG: %s" -123 "nET WYREZANYH BUFEROW" -124 "kOMANDA %s NE MOVET BYTX ISPOLXZOWANA WNUTRI OB]EJ KOMANDY" -125 "%s/%s: NE OTKRYT: NE PRINADLEVIT wAM ILI root-U" -126 "%s/%s: NE OTKRYT: NE PRINADLEVIT wAM" -127 "%s/%s: NE OTKRYT: WOZMOVNOSTX ZAPISI U POLXZOWATELQ, NE QWLQ@]EGOSQ WLADELXCEM" -128 "%s/%s: NE S^ITAN: NE PRINADLEVIT wAM ILI root-U" -129 "%s/%s: NE S^ITAN: NE PRINADLEVIT wAM" -130 "%s/%s: NE S^ITAN: WOZMOVNOSTX ZAPISI U POLXZOWATELQ, NE QWLQ@]EGOSQ WLADELXCEM" -131 "pOSLEDU@]IE STROKI OTSUTSTWU@T" -132 "oTSUTSTWIE PARAMETROW WWODA" -133 "oTSUTSTWIE PARAMETROW KOMANDY" -134 "sIMWOL %s NE MOVET BYTX PEREZAPOMNEN" -135 ""%s" NA DANNYJ MOMENT NE OTME^EN" -136 "iMQ METKI DOLVNO BYTX ODNIM SIMWOLOM" -137 "%s SU]ESTWUET, NE ZAPISAN; ISPOLXZUJTE ! DLQ OBHODA" -138 "nOWYJ FAJL .exrc: %s" -139 "sTROKA PERENOSA NAHODITSQ WNUTRI PARAMETROW PERENOSA" -140 "kOMANDA open PODRAZUMEWAET USTANOWKU OPCII open" -141 "kOMANDA open NE REALIZOWANA" -142 "zA]ITA FAJLA NEWOZMOVNA" -143 "fAJL ZA]I]EN" -144 "%s RAS[IRILSQ W SLI[KOM BOLX[OE KOLI^ESTWO IMEN FAJLOW" -146 "%s: ZA]ITA NA ^TENIE BYLA NEDOSTUPNA" -148 "%s: %lu STROK, %lu SIMWOLOW" -149 "nET TENEWYH OKON" -150 "kOMANDA script ISPOLXZUETSQ TOLXKO W REVIME vi" -151 "nET KOMANDY DLQ ISPOLNENIQ" -152 "oPCIQ shiftwidth USTANOWLENA NA 0" -153 "pEREPOLNENIE S^ET^IKA" -154 "cIKL WYPOLNEN NE DO KONCA" -155 "uKAZANO REGULQRNOE WYRAVENIE: FLAG r NE NUVEN" -156 "fLAGI #, l I p NE MOGUT BYTX OB_EDINENY S FLAGOM c W REVIME vi" -157 "sOWPADENIJ NET" -158 "mETKA OTSUTSTWUET" -159 "w STEKE METOK ZAPISEJ MENX[E, ^EM %s, ISPOLXZUJTE :display t[ags]" -160 "fAJLA S IMENEM %s W STEKE METOK NET; ISPOLXZUJTE :display t[ags]" -162 "%s: METKA NE NAJDENA" -163 "%s: PLOHAQ METKA W %s" -165 "sTEK METOK PUST" -166 "%s: ISKOMAQ PEREMENNAQ NE NAJDENA" -168 "bUFER %s PUST" -170 "pRERWANO" -171 "oTSUTSTWIE BUFERA DLQ ISPOLXZOWANIQ" -172 "nET PREDIDU]EGO REGULQRNOGO WYRAVENIQ" -173 "kOMANDA %s PODRAZUMEWAET NALI^IE PRO^TENNOGO FAJLA" -174 "iSPOLXZOWANIE: %s" -175 "kOMANDA visual PODRAZUMEWAET OBQZATELXNU@ USTANOWKU OPCII open" -176 "%s RAS[IRILSQ DO SLI[KOM BOLX[OGO KOLI^ESTWA FAJLOW" -177 "pUSTOJ FAJL" -178 "nET PREDYDU]EGO POISKA F, f, T, ILI t" -179 "%s NE NAJDENO" -180 "nET PREDYDU]EGO FAJLA DLQ REDAKTIROWANIQ" -181 "kURSOR STOIT NE NA CIFRE" -182 "pOLU^ENNOE ^ISLO SLI[KOM WELIKO" -183 "pOLU^ENNOE ^ISLO SLI[KOM MALO" -184 "pODHODQ]EGO SIMWOLA NET NA \TOJ STROKE" -185 "pODHODQ]IJ SIMWOL NE NAJDEN" -186 "nET SIMWOLOW DLQ UDALENIQ" -187 "dRUGOGO \KRANA NE SU]ESTWUET" -188 "sIMWOLY POSLE STROKI DLQ POISKA I/ILI PEREBOR STROKI" -189 "pRO[LYJ OBRAZEC POISKA OTSUTSTWUET" -190 "pOISK ZAWER[ILSQ NA NA^ALXNOJ POZICII" -192 "sIMWOL NEPRAWILEN; ZAKL@^EN W KAWY^KI DLQ WWODA" -193 "uVE NA NA^ALE WSTAWKI" -194 "nET SIMWOLOW DLQ UDALENIQ" -195 "pEREDWIVENIE ZA KONEC FAJLA" -196 "pEREDWIVENIE ZA KONEC STROKI" -197 "dWIVENIE STROKI NE SDELANO" -198 "uVE NA NA^ALE FAJLA" -199 "dWIVENIE KURSORA ZA NA^ALO FAJLA" -200 "uVE W PERWOJ KOLONKE" -201 "bUFERY DOLVNY BYTX UKAZANY DO WYPOLNENIQ KOMANDY" -202 "uVE NA KONCE FAJLA" -203 "uVE NA KONSE STROKI" -204 "%s NE QWLQETSQ KOMANDOJ VI" -205 "iSPOLXZOWANIE: %s" -206 "nET SIMWOLOW DLQ UDALENIQ" -208 "nET KOMANDY DLQ POWTORA" -210 "kOMANDA %s NE MOVET BYTX ISPOLXZOWANA KAK KOMANDA PRODWIVENIQ" -211 "~ISLO BOLX[E ^EM %lu" -214 "zNA^ENIE KOLI^ESTWA OKON SLI[KOM WELIKO, MAKSIMALXNOE ZNA^ENIE = %u" -220 "dWIVENIE KURSORA ZA KONEC \KRANA" -221 "dWIVENIE KURSORA ZA NA^ALO \KRANA" -223 "tENEWYH OKON NET" -224 "nE SU]ESTWUET TENEWOGO OKNA S REDAKTIROWANIEM FAJLA %s" -225 "wY NE MOVETE SDELATX EDINSTWENNOE OKNO TENEWYM" -226 "|KRAN MOVET BYTX SVAT" -227 "|KRAN NE MOVET BYTX SVAT" -228 "|KRAN NE MOVET BYTX RAS[IREN" -233 "dANNYJ TIP TERMINALA NE IMEET KLAWI[I %s" -237 "nEWOZMOVNO SOZDATX WREMENNYJ FAJL" -238 "wNIMANIE: %s SPECIALXNYJ FAJL" -239 "%s UVE ZABLOKIROWAN, DOSTUPEN TOLXKO NA ^TENIE" -240 "%s: UDALEN" -241 "%s: ZAKRYT" -242 "%s: UDALEN" -243 "%s: UDALEN" -244 "fAJL TOLXKO DLQ ^TENIQ, NE ZAPISAN: iSPOLXZUJTE ! DLQ OBHODA" -245 "fAJL TOLXKO DLQ ^TENIQ, NE ZAPISAN" -246 "%s SU]ESTWUET, NE ZAPISAN; ISPOLXZUJTE ! DLQ OBHODA" -247 "%s SU]ESTWUET, NE ZAPISAN" -248 "iSPOLXZUJTE ! DLQ ^ASTI^NOJ ZAPISI FAJLA" -249 "~ASTX FAJLA, FAJL NE ZAPISAN" -250 "%s: fAJL IZMENQLSQ POZDNEE, ^EM DANNAQ KOPIQ: ISPOLXZUJTE ! DLQ OBHODA" -251 "%s: fAJL IZMENQLSQ POZDNEE, ^EM DANNAQ KOPIQ" -252 "%s: ZA]ITA NA ZAPISX BYLA NEDOSTUPNA" -254 "%s: wnimanie: fajl use~en" -256 "%s: NOWYJ FAJL: %lu STROK, %lu SIMWOLOW" -257 "%s: %lu STROK, %lu SIMWOLOW" -258 "%s RAS[IRILSQ W SLI[KOM BOLX[OE KOLI^ESTWO IMEN FAJLOW" -259 "%s SPECIALXNYJ FAJL" -260 "%s: NE PRINADLEVIT wAM" -261 "%s: DOSTUPEN NE TOLXKO wAM" -262 "fAJL IZMENEN SO WREMENI POSLEDNEJ ZAPISI: SOHRANITE ILI ISPOLXZUJTE ! DLQ OBHODA" -263 "fAJL IZMENEN SO WREMENI POSLEDNEJ ZAPISI: SOHRANITE ILI ISPOLXZUJTE :edit DLQ OBHODA" -264 "fAJL IZMENEN SO WREMENI POSLEDNEJ ZAPISI: SOHRANITE ILI ISPOLXZUJTE ! DLQ OBHODA" -265 "fAJL WREMENNYJ: WYHOD SOTRET L@BYE IZMENENIQ" -267 "zAPISI NA^ATY ZANOWO" diff --git a/catalog/ru_SU.KOI8-R.check b/catalog/ru_SU.KOI8-R.check deleted file mode 100644 index ca77b891051a..000000000000 --- a/catalog/ru_SU.KOI8-R.check +++ /dev/null @@ -1,169 +0,0 @@ -Unused message id's (this is okay): -001 -008 -021 -022 -023 -024 -025 -026 -027 -028 -029 -036 -037 -057 -061 -078 -081 -090 -091 -093 -110 -145 -147 -161 -164 -167 -169 -191 -207 -209 -212 -213 -215 -216 -217 -218 -219 -222 -229 -230 -231 -232 -234 -235 -236 -253 -255 -266 -========================= -MISSING ERROR MESSAGES (Please add!): -008 -021 -022 -023 -024 -025 -026 -027 -028 -029 -036 -037 -057 -061 -078 -090 -091 -093 -110 -145 -147 -161 -164 -167 -169 -191 -207 -209 -212 -215 -216 -217 -218 -219 -222 -230 -231 -232 -234 -235 -236 -253 -255 -266 -268 -269 -270 -271 -272 -273 -274 -275 -276 -277 -278 -279 -280 -281 -282 -283 -284 -285 -286 -287 -289 -290 -291 -292 -293 -294 -295 -296 -297 -298 -299 -300 -301 -302 -303 -304 -305 -306 -307 -308 -309 -310 -311 -312 -313 -314 -315 -316 -317 -========================= -Extra error messages (just delete them): -047 -050 -051 -052 -176 -========================= -MESSAGES WITH THE SAME MESSAGE ID's (FIX!): -========================= -Duplicate messages, both id and message (this is okay): -========================= -Duplicate messages, just message (this is okay): - 2 %s RAS[IRILSQ W SLI[KOM BOLX[OE KOLI^ESTWO IMEN FAJLOWX - 2 %s SU]ESTWUET, NE ZAPISAN; ISPOLXZUJTE ! DLQ OBHODAX - 2 %s: %lu STROK, %lu SIMWOLOWX - 2 %s: NE DO KONCA WOSSTANOWLENNYJ FAJLX - 2 bUFER %s PUSTX - 2 fAJL IZMENEN SO WREMENI POSLEDNEJ ZAPISI: SOHRANITE ILI ISPOLXZUJTE ! DLQ OBHODAX - 2 set: %s OPCIQ NE QWLQETSQ DWOI^NOJX - 2 zAPISI NE WELISX, NEWOZMOVNO OTMENITX POSLEDN@@ KOMANDUX - 3 %s: UDALENX - 3 nET SIMWOLOW DLQ UDALENIQX - 4 iSPOLXZOWANIE: %sX -========================= diff --git a/catalog/ru_SU.KOI8-R.owner b/catalog/ru_SU.KOI8-R.owner deleted file mode 100644 index bf4fa180298c..000000000000 --- a/catalog/ru_SU.KOI8-R.owner +++ /dev/null @@ -1 +0,0 @@ -Dima Ruban <dima@demos.su> diff --git a/catalog/spanish b/catalog/spanish deleted file mode 100644 index fb67ee9dc422..000000000000 --- a/catalog/spanish +++ /dev/null @@ -1,317 +0,0 @@ -VI_MESSAGE_CATALOG -Desbordamiento de longitud de l¡neaX -no se puede borrar la l¡nea %luX -no se puede a¤adir la l¡nea %luX -no se puede insertar en la l¡nea %luX -no se puede guardar la l¡nea %luX -no se puede obtener la £ltima l¡neaX -Error: no se puede recuperar la l¡nea %luX -Archivo de logX -No se realiza log, no se puede deshacerX -No hay cambios para deshacerX -No se realiza log, no se puede deshacerX -No se realiza log, no se puede remontar hacia adelanteX -No hay cambios para rehacerX -%s/%d: error de logX -La entrada y salida est ndar de Vi debe ser una terminalX -Marcar %s: no determinadoX -Marcar %s: se borr¢ la l¡neaX -Marcar %s: la posici¢n del cursor ya no existeX -Error: X -nuevo archivoX -nombre cambiadoX -modificadoX -no modificadoX -DESTRABADOX -lectura solamenteX -l¡nea %lu de %lu [%ld%%]X -archivo vac¡oX -l¡nea %luX -El archivo %s no es un cat logo de mensajesX -No se puede determinar la opci¢n por omisi¢n %sX -Uso: %sX -determinar: no hay opci¢n %s: 'determinar todo' establece todos los valores de opci¢nX -determinar: [no] hay opci¢n %s no tiene valorX -determinar: opci¢n %s no es booleanoX -determinar: opci¢n %s: %sX -determinar: opci¢n %s: %s: desbordamiento de valoresX -determinar: opci¢n %s: %s es un n£mero ilegalX -determinar: opci¢n %s no es booleanoX -Las columnas en pantalla son demasiado peque¤as, menos de %dX -Las columnas en pantalla son demasiado grandes, m s de %dX -Las l¡neas en pantalla son demasiado peque¤as, menos de %dX -Las l¡neas en pantalla son demasiado grandes, m s de %dX -La opci¢n lisp no est implementadaX -mensajes no desconectados: %sX -mensajes no conectados: %sX - -La opci¢n de p rrafo debe estar en dos grupos de caracteresX -La opci¢n de secci¢n debe estar en dos grupos de caracteresX - - - -El buffer por omisi¢n est vac¡oX -El buffer %s est vac¡oX -Los archivos con nuevas l¡neas en el nombre son irrecuperablesX -Las modificaciones no pueden recuperarse si la sesi¢n fallaX -Copiando archivo para recuperaci¢n...X -Preservaci¢n fracasada: %sX -Las modificaciones no pueden recuperarse si la sesi¢n fallaX -Archivo de respaldo fracasado: %sX -Copiando archivo para recuperaci¢n...X -Informaci¢n sobre identificaci¢n del usuario %u no encontradaX -No se puede trabar archivo de recuperaci¢nX -Desbordamiento de buffer de archivo de recuperaci¢nX -Archivo de recuperaci¢nX -%s: archivo de recuperaci¢n defectuosoX -%s: archivo de recuperaci¢n defectuosoX -No hay archivos denominados %s, que usted pueda leer, para recuperarX -Existen versiones m s antiguas de este archivo que usted puede recuperarX -Existen otros archivos que usted puede recuperarX -no env¡a email: %sX -Archivo vac¡o; no hay nada para buscarX -Se alcanz¢ el final del archivo sin encontrar el patr¢nX -No hay patr¢n anterior de b£squedaX -No se encontr¢ el patr¢nX - Se alcanz¢ el principio del archivo sin encontrar el patr¢nX -B£squeda reiniciadaX -Buscando...X -No se encontr¢ ning£n car cter no imprimibleX -Nombre de comando desconocidoX - -%s: comando no disponible en modalidad exX -La cuenta no puede ser ceroX -%s: mala especificaci¢n de l¡neaX -Error interno de tabla de sintaxis (%s: %s)X -Uso: %sX -%s: buffer temporario no liberadoX -Desplazamiento de marcador a antes de la l¡nea 1X -Desplazamiento de marcador m s all del final del archivoX -@ con rango que corre cuando se cambia el archivo/la pantallaX -Comando global/v que corre cuando se cambia el archivo/la pantallaX -Comando Ex fracasado: comandos pendientes descartadosX -Comando Ex fracasado: teclas mapeadas descartadasX -La segunda direcci¢n es m s peque¤a que la primeraX -No se suministra nombre de marcaX -\\ no es seguido por / o ?X -Referencia a un n£mero de l¡nea menor que 0X -El comando %s es desconocidoX -Desbordamiento de valor de direcci¢nX -Subdesbordamiento de valor de direcci¢nX -Combinaci¢n de direcci¢n ilegalX -Direcci¢n ilegal: s¢lo %lu l¡neas en el archivoX -Direcci¢n ilegal: el archivo est vac¡oX -El comando %s no permite una direcci¢n de 0X -No hay abreviaturas para visualizarX -Las abreviaturas deben terminar con un car cter de \"palabra\" X -Las abreviaturas no pueden contener tabs o espaciosX -Las abreviaturas no pueden mezclar caracteres palabra/no-palabra, salvo al finalX -\"%s\" no es una abreviaturaX -Comando Vi fracasado: teclas mapeadas descartadasX -No hay m s archivos para editarX -No hay archivos anteriores para editarX -No hay archivos anteriores para rebobinarX -No hay lista de archivos para visualizarX -No hay un comando anterior para reemplazar a \"!\"X -No hay nombre de archivo para sustituir por %%X -No hay nombre de archivo para sustituir por #X -Error: execl: %sX -Error de E/S: %sX -Archivo modificado desde la £ltima escritura completa; escribir o usar ! para alterarX -No se puede encontrar la ubicaci¢n del directorio inicialX -Nuevo directorio actual: %sX -No hay buffers sueltos para visualizarX -El comando %s no puede usarse como parte de un comando global o vX -%s/%s: sin fuente: no le pertenece a usted o a ra¡zX -%s/%s: sin fuente: no le pertenece a ustedX -%s/%s: sin fuente: puede ser escrito por un usuario que no sea el propietarioX -%s: sin fuente: no le pertenece a usted o a ra¡zX -%s: sin fuente: no le pertenece a ustedX -%s: sin fuente: puede ser escrito por un usuario que no sea el propietarioX -No hay l¡neas siguientes para unirX -No hay anotaciones de mapa de entradaX -No hay anotaciones de mapa de comandoX -El car cter %s no puede remapearseX -\"%s\" no est mapeado actualmenteX -Marca de nombres debe ser un s¢lo car cterX -%s existe, no est escrito; usar ! para alterarX -Nuevo archivo exrc: %sX -La l¡nea de destino se encuentra dentro del rango de movimientoX -El comando abierto requiere que se determine la opci¢n abiertaX -El comando abierto no se ha implementado a£nX -No es posible preservar este archivoX -Archivo preservadoX -%s: expandido a demasiados nombres de archivoX -S¢lo pueden leerse los archivos regulares y los conductos nombradosX -%s: traba de lectura no disponibleX -Leyendo...X -%s: %lu l¡neas, %lu caracteresX -No hay pantallas de fondo para mostrarX -El comando de script s¢lo est disponible en modalidad viX -No hay comando para ejecutarX -opci¢n de ancho de desplazamiento en 0X -Desbordamiento de cuentaX -Subdesbordamiento de cuentaX -Expresi¢n regular especificada; marcador r no tiene significadoX -Los marcadores #, l y p no pueden combinarse con el marcador c en la modalidad viX -No se encontr¢ coincidenciaX -No se ingres¢ un identificador anteriorX -Se encontraron menos de %s anotaciones en la pila de identificadores; usar :visualizar i[dentificadores]X -No hay archivo %s en la pila de identificadores al que se pueda volver; usar :visualizar i[dentificadores]" -Presionar Intro para continuar: X -%s: no se encontr¢ el identificadorX -%s: identificador corrompido en %sX -%s: el n£mero de l¡nea del identificador es posterior al final del archivoX -La pila de identificadores est vac¡aX -%s: patr¢n de b£squeda no encontradoX -%d archivos m s para editarX -El buffer %s est vac¡oX -¨Confirmar cambio? [n]X -InterrumpidoX -No hay buffer anterior para ejecutarX -No hay expresi¢n regular anteriorX -El comando %s requiere que se haya le¡do un archivoX -Uso: %sX -El comando visual requiere que se determine la opci¢n abiertaX - -Archivo vac¡oX -No hay b£squeda F, f, T o t anteriorX -%s no se encontr¢X -No hay archivo anterior para editarX -El cursor no est en un n£meroX -El n£mero resultante es demasiado grandeX - El n£mero resultante es demasiado peque¤oX -No hay car cter coincidente en esta l¡neaX -No se encontr¢ un car cter coincidenteX -No hay caracteres para reemplazarX -No hay otra pantalla a la que se pueda pasarX -Caracteres despu‚s de cadena de b£squeda, desplazamiento de l¡nea y/o comando zX -No hay patr¢n anterior de b£squedaX -B£squeda vuelve a la posici¢n inicialX -Se super¢ el l¡mite de expansi¢n de abreviatura: se descartaron caracteresX -Car cter ilegal; mencionar para entrarX -Ya se encuentra al principio de la inserci¢nX -No hay m s caracteres para borrarX -Movimiento m s all del final del archivoX -Movimiento m s all del final de la l¡neaX -No hay movimiento del cursorX -Ya se encuentra al principio del archivoX -Movimiento m s all del principio del archivoX -Ya se encuentra en la primera columnaX -Los buffers deben especificarse antes del comandoX -Ya se encuentra al final del archivoX -Ya se encuentra al final de la l¡neaX -%s no es un comando viX -Uso: %sX -No hay caracteres para borrarX -El comando Q requiere la interfase de terminal exX -No hay comando para repetirX -El archivo est vac¡oX -%s no puede usarse como comando de movimientoX -Ya se encuentra en modalidad de comandoX -El cursor no se encuentra en una palabraX - -El valor de opci¢n de Windows es demasiado grande, el m x. es %uX -A¤adirX -CambiarX -ComandoX -InsertarX -ReemplazarX -El movimiento va m s all del final de la pantallaX -El movimiento va m s all del principio de la pantallaX -La pantalla debe tener m s de %d l¡neas para dividirseX -No hay pantallas de fondoX -No hay pantalla de fondo editando un archivo denominado %sX -No se puede poner fondo a la £nica pantalla que se visualizaX -La pantalla s¢lo puede reducirse a %d hilerasX -La pantalla no puede reducirseX -La pantalla no puede aumentarseX - -Esta pantalla no puede suspenderseX -Interrumpido: teclas mapeadas descartadasX -vi: buffer temporario no liberadoX -Esta terminal no tiene tecla %sX -S¢lo un buffer puede especificarseX -N£mero mayor que %luX -InterrumpidoX -No se puede crear archivo temporarioX -Advertencia: %s no es un archivo regularX -%s ya se encuentra trabado, la sesi¢n es de lectura solamenteX -%s: eliminarX -%s: cerrarX -%s: eliminarX -%s: eliminarX -Archivo de lectura solamente, no escrito; usar ! para alterarX - Archivo de lectura solamente, no escritoX -%s existe, no escrito; usar ! para alterarX -%s existe, no escritoX -Archivo parcial, no escrito; usar ! para alterarX -Archivo parcial, no escritoX -%s: archivo modificado m s recientemente que esta copia; usar ! para alterarX -%s: archivo modificado m s recientemente que esta copiaX -%s: la traba de escritura no estaba disponibleX -Escribiendo...X -%s: ADVERTENCIA: ARCHIVO TRUNCADOX -Ya se encuentra en el primer identificador de este grupoX -%s: nuevo archivo: %lu l¡neas, %lu caracteresX -%s: %lu l¡neas, %lu caracteresX -%s expandido a demasiados nombres de archivosX -%s: no es un archivo regularX -%s: no le perteneceX -%s: accesible por un usuario que no sea el propietarioX -Archivo modificado desde la £ltima escritura completa; escribir o usar ! para alterarX -Archivo modificado desde la £ltima escritura completa; escribir o usar :editar! para alterarX -Archivo modificado desde la £ltima escritura completa; escribir o usar ! para alterarX -El archivo es temporario; al salir se descartar n las modificacionesX -Archivo de lectura solamente, las modificaciones no se autoescribenX -Se reinici¢ el logX -confirmar? [snq]X -Presionar cualquier tecla para continuar: X -Presionar cualquier tecla para continuar [: para ingresar m s comandos ex]: X -Presionar cualquier tecla para continuar [q para salir]: X -Esta forma de %s requiere la interfase terminal exX -Ingresando en la modalidad de entrada ex.X -Comando fracasado, no hay archivo le¡do aun.X - cont?X -Evento inesperado de car cterX -Evento inesperado de final de archivoX -No hay coincidencias para consultaX -Evento inesperado de interrupci¢nX -Evento inesperado de salidaX -Evento inesperado de repinturaX -Ya se encuentra en el £ltimo identificador de este grupoX -El comando %s requiere la interfase terminal exX -Esta forma de %s no se encuentra soportada cuando se determina la opci¢n de edici¢n seguraX -Evento inesperado de cadenaX -Evento inesperado de tiempo excedidoX -Evento inesperado de escrituraX - -Las expansiones de shell no se encuentran soportadas cuando se determina la opci¢n de edici¢n seguraX -El comando %s no se encuentra soportado cuando se determina la opci¢n de edici¢n seguraX -determinar: la opci¢n %s puede no estar desconectadaX -El monitor es demasiado peque¤o.X -agregadoX -cambiadoX -borradoX -unidoX -movidoX -desplazadoX -arrancadoX -l¡neaX -l¡neasX -Vi no se carg¢ con un int‚rprete TclX -Archivo modificado desde la £ltima escritura.X -Expansi¢n de shell fracasadaX -No hay opci¢n de edici¢n %s especificadaX -Vi no se carg¢ con un int‚rprete PerlX -No hay comando ex para ejecutarX -Ingresar <CR> para ejecutar un comando, :q para salirX -Usar \"cscope ayuda\" para obtener ayudaX -No hay conexiones cscope corriendoX -%s: tipo de b£squeda desconocido: usar uno de %sX -%d: no existe esta sesi¢n cscopeX -determinar: la opci¢n %s no puede conectarse nuncaX -determinar: la opci¢n %s no puede determinarse nunca en 0X -%s: a¤adido: %lu l¡neas, %lu caracteresX -Evento inesperado de modificaci¢n de tama¤oX -%d archivos para editarX diff --git a/catalog/spanish.base b/catalog/spanish.base index 270199eee5c8..ee37a6d31b24 100644 --- a/catalog/spanish.base +++ b/catalog/spanish.base @@ -1,10 +1,10 @@ -002 "Desbordamiento de longitud de l¡nea" -003 "no se puede borrar la l¡nea %lu" -004 "no se puede a¤adir la l¡nea %lu" -005 "no se puede insertar en la l¡nea %lu" -006 "no se puede guardar la l¡nea %lu" -007 "no se puede obtener la £ltima l¡nea" -008 "Error: no se puede recuperar la l¡nea %lu" +002 "Desbordamiento de longitud de línea" +003 "no se puede borrar la línea %lu" +004 "no se puede añadir la línea %lu" +005 "no se puede insertar en la línea %lu" +006 "no se puede guardar la línea %lu" +007 "no se puede obtener la última línea" +008 "Error: no se puede recuperar la línea %lu" 009 "Archivo de log" 010 "No se realiza log, no se puede deshacer" 011 "No hay cambios para deshacer" @@ -12,10 +12,10 @@ 013 "No se realiza log, no se puede remontar hacia adelante" 014 "No hay cambios para rehacer" 015 "%s/%d: error de log" -016 "La entrada y salida est ndar de Vi debe ser una terminal" +016 "La entrada y salida estándar de Vi debe ser una terminal" 017 "Marcar %s: no determinado" -018 "Marcar %s: se borr¢ la l¡nea" -019 "Marcar %s: la posici¢n del cursor ya no existe" +018 "Marcar %s: se borró la línea" +019 "Marcar %s: la posición del cursor ya no existe" 020 "Error: " 021 "nuevo archivo" 022 "nombre cambiado" @@ -23,86 +23,85 @@ 024 "no modificado" 025 "DESTRABADO" 026 "lectura solamente" -027 "l¡nea %lu de %lu [%ld%%]" -028 "archivo vac¡o" -029 "l¡nea %lu" -030 "El archivo %s no es un cat logo de mensajes" -031 "No se puede determinar la opci¢n por omisi¢n %s" +027 "línea %lu de %lu [%ld%%]" +028 "archivo vacío" +029 "línea %lu" +030 "El archivo %s no es un catálogo de mensajes" +031 "No se puede determinar la opción por omisión %s" 032 "Uso: %s" -033 "determinar: no hay opci¢n %s: 'determinar todo' establece todos los valores de opci¢n" -034 "determinar: [no] hay opci¢n %s no tiene valor" -035 "determinar: opci¢n %s no es booleano" -036 "determinar: opci¢n %s: %s" -037 "determinar: opci¢n %s: %s: desbordamiento de valores" -038 "determinar: opci¢n %s: %s es un n£mero ilegal" -039 "determinar: opci¢n %s no es booleano" -040 "Las columnas en pantalla son demasiado peque¤as, menos de %d" -041 "Las columnas en pantalla son demasiado grandes, m s de %d" -042 "Las l¡neas en pantalla son demasiado peque¤as, menos de %d" -043 "Las l¡neas en pantalla son demasiado grandes, m s de %d" -044 "La opci¢n lisp no est implementada" +033 "determinar: no hay opción %s: 'determinar todo' establece todos los valores de opción" +034 "determinar: [no] hay opción %s no tiene valor" +035 "determinar: opción %s no es booleano" +036 "determinar: opción %s: %s" +037 "determinar: opción %s: %s: desbordamiento de valores" +038 "determinar: opción %s: %s es un número ilegal" +039 "determinar: opción %s no es booleano" +040 "Las columnas en pantalla son demasiado pequeñas, menos de %d" +041 "Las columnas en pantalla son demasiado grandes, más de %d" +042 "Las líneas en pantalla son demasiado pequeñas, menos de %d" +043 "Las líneas en pantalla son demasiado grandes, más de %d" +044 "La opción lisp no está implementada" 045 "mensajes no desconectados: %s" 046 "mensajes no conectados: %s" -048 "La opci¢n de p rrafo debe estar en dos grupos de caracteres" -049 "La opci¢n de secci¢n debe estar en dos grupos de caracteres" -053 "El buffer por omisi¢n est vac¡o" -054 "El buffer %s est vac¡o" -055 "Los archivos con nuevas l¡neas en el nombre son irrecuperables" -056 "Las modificaciones no pueden recuperarse si la sesi¢n falla" -057 "Copiando archivo para recuperaci¢n..." -058 "Preservaci¢n fracasada: %s" -059 "Las modificaciones no pueden recuperarse si la sesi¢n falla" +047 "La opción de %s debe estar en dos grupos de caracteres" +053 "El buffer por omisión está vacío" +054 "El buffer %s está vacío" +055 "Los archivos con nuevas líneas en el nombre son irrecuperables" +056 "Las modificaciones no pueden recuperarse si la sesión falla" +057 "Copiando archivo para recuperación..." +058 "Preservación fracasada: %s" +059 "Las modificaciones no pueden recuperarse si la sesión falla" 060 "Archivo de respaldo fracasado: %s" -061 "Copiando archivo para recuperaci¢n..." -062 "Informaci¢n sobre identificaci¢n del usuario %u no encontrada" -063 "No se puede trabar archivo de recuperaci¢n" -064 "Desbordamiento de buffer de archivo de recuperaci¢n" -065 "Archivo de recuperaci¢n" -066 "%s: archivo de recuperaci¢n defectuoso" -067 "%s: archivo de recuperaci¢n defectuoso" +061 "Copiando archivo para recuperación..." +062 "Información sobre identificación del usuario %u no encontrada" +063 "No se puede trabar archivo de recuperación" +064 "Desbordamiento de buffer de archivo de recuperación" +065 "Archivo de recuperación" +066 "%s: archivo de recuperación defectuoso" +067 "%s: archivo de recuperación defectuoso" 068 "No hay archivos denominados %s, que usted pueda leer, para recuperar" -069 "Existen versiones m s antiguas de este archivo que usted puede recuperar" +069 "Existen versiones más antiguas de este archivo que usted puede recuperar" 070 "Existen otros archivos que usted puede recuperar" -071 "no env¡a email: %s" -072 "Archivo vac¡o; no hay nada para buscar" -073 "Se alcanz¢ el final del archivo sin encontrar el patr¢n" -074 "No hay patr¢n anterior de b£squeda" -075 "No se encontr¢ el patr¢n" -076 " Se alcanz¢ el principio del archivo sin encontrar el patr¢n" -077 "B£squeda reiniciada" +071 "no envía email: %s" +072 "Archivo vacío; no hay nada para buscar" +073 "Se alcanzó el final del archivo sin encontrar el patrón" +074 "No hay patrón anterior de búsqueda" +075 "No se encontró el patrón" +076 " Se alcanzó el principio del archivo sin encontrar el patrón" +077 "Búsqueda reiniciada" 078 "Buscando..." -079 "No se encontr¢ ning£n car cter no imprimible" +079 "No se encontró ningún carácter no imprimible" 080 "Nombre de comando desconocido" 082 "%s: comando no disponible en modalidad ex" 083 "La cuenta no puede ser cero" -084 "%s: mala especificaci¢n de l¡nea" +084 "%s: mala especificación de línea" 085 "Error interno de tabla de sintaxis (%s: %s)" 086 "Uso: %s" 087 "%s: buffer temporario no liberado" -088 "Desplazamiento de marcador a antes de la l¡nea 1" -089 "Desplazamiento de marcador m s all del final del archivo" +088 "Desplazamiento de marcador a antes de la línea 1" +089 "Desplazamiento de marcador más allá del final del archivo" 090 "@ con rango que corre cuando se cambia el archivo/la pantalla" 091 "Comando global/v que corre cuando se cambia el archivo/la pantalla" 092 "Comando Ex fracasado: comandos pendientes descartados" 093 "Comando Ex fracasado: teclas mapeadas descartadas" -094 "La segunda direcci¢n es m s peque¤a que la primera" +094 "La segunda dirección es más pequeña que la primera" 095 "No se suministra nombre de marca" 096 "\\ no es seguido por / o ?" -097 "Referencia a un n£mero de l¡nea menor que 0" +097 "Referencia a un número de línea menor que 0" 098 "El comando %s es desconocido" -099 "Desbordamiento de valor de direcci¢n" -100 "Subdesbordamiento de valor de direcci¢n" -101 "Combinaci¢n de direcci¢n ilegal" -102 "Direcci¢n ilegal: s¢lo %lu l¡neas en el archivo" -103 "Direcci¢n ilegal: el archivo est vac¡o" -104 "El comando %s no permite una direcci¢n de 0" +099 "Desbordamiento de valor de dirección" +100 "Subdesbordamiento de valor de dirección" +101 "Combinación de dirección ilegal" +102 "Dirección ilegal: sólo %lu líneas en el archivo" +103 "Dirección ilegal: el archivo está vacío" +104 "El comando %s no permite una dirección de 0" 105 "No hay abreviaturas para visualizar" -106 "Las abreviaturas deben terminar con un car cter de \"palabra\" " +106 "Las abreviaturas deben terminar con un carácter de \"palabra\" " 107 "Las abreviaturas no pueden contener tabs o espacios" 108 "Las abreviaturas no pueden mezclar caracteres palabra/no-palabra, salvo al final" 109 "\"%s\" no es una abreviatura" 110 "Comando Vi fracasado: teclas mapeadas descartadas" -111 "No hay m s archivos para editar" +111 "No hay más archivos para editar" 112 "No hay archivos anteriores para editar" 113 "No hay archivos anteriores para rebobinar" 114 "No hay lista de archivos para visualizar" @@ -111,124 +110,123 @@ 117 "No hay nombre de archivo para sustituir por #" 118 "Error: execl: %s" 119 "Error de E/S: %s" -120 "Archivo modificado desde la £ltima escritura completa; escribir o usar ! para alterar" -121 "No se puede encontrar la ubicaci¢n del directorio inicial" +120 "Archivo modificado desde la última escritura completa; escribir o usar ! para alterar" +121 "No se puede encontrar la ubicación del directorio inicial" 122 "Nuevo directorio actual: %s" 123 "No hay buffers sueltos para visualizar" 124 "El comando %s no puede usarse como parte de un comando global o v" -125 "%s/%s: sin fuente: no le pertenece a usted o a ra¡z" +125 "%s/%s: sin fuente: no le pertenece a usted o a raíz" 126 "%s/%s: sin fuente: no le pertenece a usted" 127 "%s/%s: sin fuente: puede ser escrito por un usuario que no sea el propietario" -128 "%s: sin fuente: no le pertenece a usted o a ra¡z" +128 "%s: sin fuente: no le pertenece a usted o a raíz" 129 "%s: sin fuente: no le pertenece a usted" 130 "%s: sin fuente: puede ser escrito por un usuario que no sea el propietario" -131 "No hay l¡neas siguientes para unir" +131 "No hay líneas siguientes para unir" 132 "No hay anotaciones de mapa de entrada" 133 "No hay anotaciones de mapa de comando" -134 "El car cter %s no puede remapearse" -135 "\"%s\" no est mapeado actualmente" -136 "Marca de nombres debe ser un s¢lo car cter" -137 "%s existe, no est escrito; usar ! para alterar" +134 "El carácter %s no puede remapearse" +135 "\"%s\" no está mapeado actualmente" +136 "Marca de nombres debe ser un sólo carácter" +137 "%s existe, no está escrito; usar ! para alterar" 138 "Nuevo archivo exrc: %s" -139 "La l¡nea de destino se encuentra dentro del rango de movimiento" -140 "El comando abierto requiere que se determine la opci¢n abierta" -141 "El comando abierto no se ha implementado a£n" +139 "La línea de destino se encuentra dentro del rango de movimiento" +140 "El comando abierto requiere que se determine la opción abierta" +141 "El comando abierto no se ha implementado aún" 142 "No es posible preservar este archivo" 143 "Archivo preservado" 144 "%s: expandido a demasiados nombres de archivo" -145 "S¢lo pueden leerse los archivos regulares y los conductos nombrados" +145 "Sólo pueden leerse los archivos regulares y los conductos nombrados" 146 "%s: traba de lectura no disponible" 147 "Leyendo..." -148 "%s: %lu l¡neas, %lu caracteres" +148 "%s: %lu líneas, %lu caracteres" 149 "No hay pantallas de fondo para mostrar" -150 "El comando de script s¢lo est disponible en modalidad vi" +150 "El comando de script sólo está disponible en modalidad vi" 151 "No hay comando para ejecutar" -152 "opci¢n de ancho de desplazamiento en 0" +152 "opción de ancho de desplazamiento en 0" 153 "Desbordamiento de cuenta" 154 "Subdesbordamiento de cuenta" -155 "Expresi¢n regular especificada; marcador r no tiene significado" +155 "Expresión regular especificada; marcador r no tiene significado" 156 "Los marcadores #, l y p no pueden combinarse con el marcador c en la modalidad vi" -157 "No se encontr¢ coincidencia" -158 "No se ingres¢ un identificador anterior" +157 "No se encontró coincidencia" +158 "No se ingresó un identificador anterior" 159 "Se encontraron menos de %s anotaciones en la pila de identificadores; usar :visualizar i[dentificadores]" 160 "No hay archivo %s en la pila de identificadores al que se pueda volver; usar :visualizar i[dentificadores]" 161 "Presionar Intro para continuar: " -162 "%s: no se encontr¢ el identificador" +162 "%s: no se encontró el identificador" 163 "%s: identificador corrompido en %s" -164 "%s: el n£mero de l¡nea del identificador es posterior al final del archivo" -165 "La pila de identificadores est vac¡a" -166 "%s: patr¢n de b£squeda no encontrado" -167 "%d archivos m s para editar" -168 "El buffer %s est vac¡o" -169 "¨Confirmar cambio? [n]" +164 "%s: el número de línea del identificador es posterior al final del archivo" +165 "La pila de identificadores está vacía" +166 "%s: patrón de búsqueda no encontrado" +167 "%d archivos más para editar" +168 "El buffer %s está vacío" +169 "¿Confirmar cambio? [n]" 170 "Interrumpido" 171 "No hay buffer anterior para ejecutar" -172 "No hay expresi¢n regular anterior" -173 "El comando %s requiere que se haya le¡do un archivo" +172 "No hay expresión regular anterior" +173 "El comando %s requiere que se haya leído un archivo" 174 "Uso: %s" -175 "El comando visual requiere que se determine la opci¢n abierta" -177 "Archivo vac¡o" -178 "No hay b£squeda F, f, T o t anterior" -179 "%s no se encontr¢" +175 "El comando visual requiere que se determine la opción abierta" +177 "Archivo vacío" +178 "No hay búsqueda F, f, T o t anterior" +179 "%s no se encontró" 180 "No hay archivo anterior para editar" -181 "El cursor no est en un n£mero" -182 "El n£mero resultante es demasiado grande" -183 " El n£mero resultante es demasiado peque¤o" -184 "No hay car cter coincidente en esta l¡nea" -185 "No se encontr¢ un car cter coincidente" +181 "El cursor no está en un número" +182 "El número resultante es demasiado grande" +183 " El número resultante es demasiado pequeño" +184 "No hay carácter coincidente en esta línea" +185 "No se encontró un carácter coincidente" 186 "No hay caracteres para reemplazar" 187 "No hay otra pantalla a la que se pueda pasar" -188 "Caracteres despu‚s de cadena de b£squeda, desplazamiento de l¡nea y/o comando z" -189 "No hay patr¢n anterior de b£squeda" -190 "B£squeda vuelve a la posici¢n inicial" -191 "Se super¢ el l¡mite de expansi¢n de abreviatura: se descartaron caracteres" -192 "Car cter ilegal; mencionar para entrar" -193 "Ya se encuentra al principio de la inserci¢n" -194 "No hay m s caracteres para borrar" -195 "Movimiento m s all del final del archivo" -196 "Movimiento m s all del final de la l¡nea" +188 "Caracteres tras de cadena de búsqueda, desplazamiento de línea y/o comando z" +189 "No hay patrón anterior de búsqueda" +190 "Búsqueda vuelve a la posición inicial" +191 "Se superó el límite de expansión de abreviatura: se descartaron caracteres" +192 "Carácter ilegal; mencionar para entrar" +193 "Ya se encuentra al principio de la inserción" +194 "No hay más caracteres para borrar" +195 "Movimiento más allá del final del archivo" +196 "Movimiento más allá del final de la línea" 197 "No hay movimiento del cursor" 198 "Ya se encuentra al principio del archivo" -199 "Movimiento m s all del principio del archivo" +199 "Movimiento más allá del principio del archivo" 200 "Ya se encuentra en la primera columna" 201 "Los buffers deben especificarse antes del comando" 202 "Ya se encuentra al final del archivo" -203 "Ya se encuentra al final de la l¡nea" +203 "Ya se encuentra al final de la línea" 204 "%s no es un comando vi" 205 "Uso: %s" 206 "No hay caracteres para borrar" 207 "El comando Q requiere la interfase de terminal ex" 208 "No hay comando para repetir" -209 "El archivo est vac¡o" -209 "El archivo est vac¡o" +209 "El archivo está vacío" 210 "%s no puede usarse como comando de movimiento" 211 "Ya se encuentra en modalidad de comando" 212 "El cursor no se encuentra en una palabra" -214 "El valor de opci¢n de Windows es demasiado grande, el m x. es %u" -215 "A¤adir" +214 "El valor de opción de Windows es demasiado grande, el máx. es %u" +215 "Añadir" 216 "Cambiar" 217 "Comando" 218 "Insertar" 219 "Reemplazar" -220 "El movimiento va m s all del final de la pantalla" -221 "El movimiento va m s all del principio de la pantalla" -222 "La pantalla debe tener m s de %d l¡neas para dividirse" +220 "El movimiento va más allá del final de la pantalla" +221 "El movimiento va más allá del principio de la pantalla" +222 "La pantalla debe tener más de %d líneas para dividirse" 223 "No hay pantallas de fondo" 224 "No hay pantalla de fondo editando un archivo denominado %s" -225 "No se puede poner fondo a la £nica pantalla que se visualiza" -226 "La pantalla s¢lo puede reducirse a %d hileras" +225 "No se puede poner fondo a la única pantalla que se visualiza" +226 "La pantalla sólo puede reducirse a %d hileras" 227 "La pantalla no puede reducirse" 228 "La pantalla no puede aumentarse" 230 "Esta pantalla no puede suspenderse" 231 "Interrumpido: teclas mapeadas descartadas" 232 "vi: buffer temporario no liberado" 233 "Esta terminal no tiene tecla %s" -234 "S¢lo un buffer puede especificarse" -235 "N£mero mayor que %lu" +234 "Sólo un buffer puede especificarse" +235 "Número mayor que %lu" 236 "Interrumpido" 237 "No se puede crear archivo temporario" 238 "Advertencia: %s no es un archivo regular" -239 "%s ya se encuentra trabado, la sesi¢n es de lectura solamente" +239 "%s ya se encuentra trabado, la sesión es de lectura solamente" 240 "%s: eliminar" 241 "%s: cerrar" 242 "%s: eliminar" @@ -239,48 +237,48 @@ 247 "%s existe, no escrito" 248 "Archivo parcial, no escrito; usar ! para alterar" 249 "Archivo parcial, no escrito" -250 "%s: archivo modificado m s recientemente que esta copia; usar ! para alterar" -251 "%s: archivo modificado m s recientemente que esta copia" +250 "%s: archivo modificado más recientemente que esta copia; usar ! para alterar" +251 "%s: archivo modificado más recientemente que esta copia" 252 "%s: la traba de escritura no estaba disponible" 253 "Escribiendo..." 254 "%s: ADVERTENCIA: ARCHIVO TRUNCADO" 255 "Ya se encuentra en el primer identificador de este grupo" -256 "%s: nuevo archivo: %lu l¡neas, %lu caracteres" -257 "%s: %lu l¡neas, %lu caracteres" +256 "%s: nuevo archivo: %lu líneas, %lu caracteres" +257 "%s: %lu líneas, %lu caracteres" 258 "%s expandido a demasiados nombres de archivos" 259 "%s: no es un archivo regular" 260 "%s: no le pertenece" 261 "%s: accesible por un usuario que no sea el propietario" -262 "Archivo modificado desde la £ltima escritura completa; escribir o usar ! para alterar" -263 "Archivo modificado desde la £ltima escritura completa; escribir o usar :editar! para alterar" -264 "Archivo modificado desde la £ltima escritura completa; escribir o usar ! para alterar" -265 "El archivo es temporario; al salir se descartar n las modificaciones" +262 "Archivo modificado desde la última escritura completa; escribir o usar ! para alterar" +263 "Archivo modificado desde la última escritura completa; escribir o usar :editar! para alterar" +264 "Archivo modificado desde la última escritura completa; escribir o usar ! para alterar" +265 "El archivo es temporario; al salir se descartarán las modificaciones" 266 "Archivo de lectura solamente, las modificaciones no se autoescriben" -267 "Se reinici¢ el log" +267 "Se reinició el log" 268 "confirmar? [snq]" 269 "Presionar cualquier tecla para continuar: " -270 "Presionar cualquier tecla para continuar [: para ingresar m s comandos ex]: " +270 "Presionar cualquier tecla para continuar [: para ingresar más comandos ex]: " 271 "Presionar cualquier tecla para continuar [q para salir]: " 272 "Esta forma de %s requiere la interfase terminal ex" 273 "Ingresando en la modalidad de entrada ex." -274 "Comando fracasado, no hay archivo le¡do aun." +274 "Comando fracasado, no hay archivo leído aun." 275 " cont?" -276 "Evento inesperado de car cter" +276 "Evento inesperado de carácter" 277 "Evento inesperado de final de archivo" 278 "No hay coincidencias para consulta" -279 "Evento inesperado de interrupci¢n" +279 "Evento inesperado de interrupción" 280 "Evento inesperado de salida" 281 "Evento inesperado de repintura" -282 "Ya se encuentra en el £ltimo identificador de este grupo" +282 "Ya se encuentra en el último identificador de este grupo" 283 "El comando %s requiere la interfase terminal ex" -284 "Esta forma de %s no se encuentra soportada cuando se determina la opci¢n de edici¢n segura" +284 "Esta forma de %s no se encuentra soportada cuando se determina la opción de edición segura" 285 "Evento inesperado de cadena" 286 "Evento inesperado de tiempo excedido" 287 "Evento inesperado de escritura" -289 "Las expansiones de shell no se encuentran soportadas cuando se determina la opci¢n de edici¢n segura" -290 "El comando %s no se encuentra soportado cuando se determina la opci¢n de edici¢n segura" -291 "determinar: la opci¢n %s puede no estar desconectada" -292 "El monitor es demasiado peque¤o." +289 "Las expansiones de shell no se encuentran soportadas cuando se determina la opción de edición segura" +290 "El comando %s no se encuentra soportado cuando se determina la opción de edición segura" +291 "determinar: la opción %s puede no estar desconectada" +292 "El monitor es demasiado pequeño." 293 "agregado" 294 "cambiado" 295 "borrado" @@ -288,22 +286,21 @@ 297 "movido" 298 "desplazado" 299 "arrancado" -300 "l¡nea" -301 "l¡neas" -302 "Vi no se carg¢ con un int‚rprete Tcl" -303 "Archivo modificado desde la £ltima escritura." -304 "Expansi¢n de shell fracasada" -304 "Expansi¢n de shell fracasada" -305 "No hay opci¢n de edici¢n %s especificada" -306 "Vi no se carg¢ con un int‚rprete Perl" +300 "línea" +301 "líneas" +302 "Vi no se cargó con un intérprete Tcl" +303 "Archivo modificado desde la última escritura." +304 "Expansión de shell fracasada" +305 "No hay opción de edición %s especificada" +306 "Vi no se cargó con un intérprete Perl" 307 "No hay comando ex para ejecutar" 308 "Ingresar <CR> para ejecutar un comando, :q para salir" 309 "Usar \"cscope ayuda\" para obtener ayuda" 310 "No hay conexiones cscope corriendo" -311 "%s: tipo de b£squeda desconocido: usar uno de %s" -312 "%d: no existe esta sesi¢n cscope" -313 "determinar: la opci¢n %s no puede conectarse nunca" -314 "determinar: la opci¢n %s no puede determinarse nunca en 0" -315 "%s: a¤adido: %lu l¡neas, %lu caracteres" -316 "Evento inesperado de modificaci¢n de tama¤o" +311 "%s: tipo de búsqueda desconocido: usar uno de %s" +312 "%d: no existe esta sesión cscope" +313 "determinar: la opción %s no puede conectarse nunca" +314 "determinar: la opción %s no puede determinarse nunca en 0" +315 "%s: añadido: %lu líneas, %lu caracteres" +316 "Evento inesperado de modificación de tamaño" 317 "%d archivos para editar" diff --git a/catalog/spanish.check b/catalog/spanish.check deleted file mode 100644 index c04785e3a2ef..000000000000 --- a/catalog/spanish.check +++ /dev/null @@ -1,35 +0,0 @@ -Unused message id's (this is okay): -001 -047 -050 -051 -052 -081 -176 -229 -288 -========================= -MISSING ERROR MESSAGES (Please add!): -========================= -Extra error messages (just delete them): -========================= -MESSAGES WITH THE SAME MESSAGE ID's (FIX!): -========================= -Duplicate messages, both id and message (this is okay): - 2 209 "El archivo est vac¡o" - 2 304 "Expansi¢n de shell fracasada" -========================= -Duplicate messages, just message (this is okay): - 2 %s: %lu l¡neas, %lu caracteresX - 2 %s: archivo de recuperaci¢n defectuosoX - 2 Copiando archivo para recuperaci¢n...X - 2 El buffer %s est vac¡oX - 2 InterrumpidoX - 2 Las modificaciones no pueden recuperarse si la sesi¢n fallaX - 2 No hay patr¢n anterior de b£squedaX - 2 No se realiza log, no se puede deshacerX - 2 determinar: opci¢n %s no es booleanoX - 3 %s: eliminarX - 3 Archivo modificado desde la £ltima escritura completa; escribir o usar ! para alterarX - 4 Uso: %sX -========================= diff --git a/catalog/swedish b/catalog/swedish deleted file mode 100644 index 044b354fa070..000000000000 --- a/catalog/swedish +++ /dev/null @@ -1,317 +0,0 @@ -VI_MESSAGE_CATALOG -För långa raderX -kan inte ta bort rad %luX -kan inte lägga till på rad %luX -kan inte sätta in på rad %luX -kan inte lagra rad %luX -kan inte hämta sista radenX -Fel: kan inte hämta rad %luX -LoggningsfilX -Loggning utförs inte, ångra är inte möjligtX -Inga ändringar att ångraX -Loggning utförs inte, ångra är inte möjligtX -Loggning utförs inte, ångra ångra är inte möjligtX -Inga ändringar att återgöraX -%s/%d: fel vid loggningX -Vi:s standard in och ut måste gå till en terminalX -Markering %s: inte sattX -Markering %s: raden har tagits bortX -Markering %s: markörpositionen finns inte längreX -Fel: X -ny filX -namnet ändradesX -ändradX -oförändradX -OLÅSTX -inte skrivbarX -rad %lu av %lu [%ld%%]X -tom filX -rad %luX -Filen %s är ingen meddelandekatalogX -Kan inte sätta standardvärde för %s flagganX -Användning: %sX -set: %s är en okänd flagga: "set all" visar alla flaggorX -set: [no]%s flaggan kan inte ges ett värdeX -set: %s flaggan är inte boleanskX -set: %s flaggan: %sX -set: %s flaggan: %s: för stort värdeX -set: %s flaggan: %s är ett otillåtet talX -set: %s flaggan är inte boleanskX -Fönsterkolumnerna är för få, mindre än %dX -Fönsterkolumnerna är för många, fler än %dX -Fönsterraderna är för få, mindre än %dX -Fönsterraderna är för många, fler än %dX -Lisp flaggan är inte implementeradX -meddelanden är inte avslagna: %sX -meddelanden är inte påslagna: %sX - -Paragraph flaggan måste ges i teckengrupper om tvåX -Section flaggan måste ges i teckengrupper om tvåX - - - -Standardbufferten är tomX -Buffer %s är tomX -Filer med radmatning i namnet kan inte återskapasX -Ändringar kan inte återskapas om programmet krascharX -Kopierar filen för återskapning...X -Säkerhetskopiering misslyckades: %sX -Ändringar kan inte återskapas om programmet krascharX -Misslyckades att säkerhetskopiera filen: %sX -Kopierar filen för återskapning...X -Kan inte hitta information om användaridentitet %uX -Kan inte låsa återskapningsfilenX -Återskapningsfilens buffer överskrivenX -ÅterskapningsfilX -%s: Återskapningsfilen är korruptX -%s: Återskapningsfilen är korruptX -Det finns ingen fil %s, läsbar av dig, att återskapaX -Det finns äldre versioner av denna fil som du kan återskapaX -Det finns andra filer du kan återskapaX -skickar inte email: %sX -Filen är tom; inget att söka iX -Kom till slutet på filen utan att hitta söksträngenX -Ingen tidigare söksträngX -Hittar inte söksträngenX -Kom till början av filen utan att hitta söksträngenX -Sökningen slog runtX -Söker...X -Inga icke skrivbara tecken funnaX -Okänt kommandonamnX - -%s: kommandot är inte tillgängligt i "ex" lägeX -Talet får inte vara nollX -%s: Ogiltig radspecifikationX -Fel i intern syntaxtabell (%s: %s)X -Användning: %sX -%s: temporärbuffert inte frisläpptX -Offset är före rad 1X -Offset är efter slutet på filenX -@ med intervall exekverades när filen/fönstret ändradesX -Global/v kommando exekverades när filen/fönstret ändradesX -Ex kommando misslyckades: efterföljande kommandon ignoreradeX -Ex kommando misslyckades: omdefinierade tangenter ignoreradeX -Den andra adressen är mindre än den förstaX -Inget namn på markering givetX -\\ följs inte av / eller ?X -Referens till ett radnummer mindre än 0X -%s kommandot är inte käntX -Värdet på adressen är för stortX -Värdet på adressen är för litetX -Otillåten adresskombinationX -Otillåten adress: bara %lu rader finns i filenX -Otillåten adress: filen är tomX -%s kommandot tillåter inte en adress som är 0X -Inga förkortningar att visaX -Förkortningar måste sluta med ett "ord" teckenX -Förkortningar kan inte innehålla mellanslag eller tabX -Förkortningar kan inte blanda "ord"/"icke ord" tecken, utom i slutetX -"%s" är ingen förkortningX -Vi kommando misslyckades: omdefinierade tangenter ignoreradeX -Inga fler filer att editeraX -Inga tidigare filer att editeraX -Inga tidigare filer att spela tillbakaX -Ingen fillista att visaX -Inget tidigare kommando att ersätta "!" medX -Inget filnamn att ersätta %% medX -Inget filnamn att ersätta # medX -Fel: execl: %sX -I/O fel: %sX -Filen ändrad efter sista skrivning; spara eller använd !X -Kan inte hitta hemkatalogX -Ny nuvarande katalog: %sX -Inga "cut buffers" att visaX -%s kommandot kan inte används som del i ett "global" eller v kommandoX -%s/%s: inte läst: varken du eller root är ägareX -%s/%s: inte läst: du är inte ägareX -%s/%s: inte läst: skrivbar av annan än ägarenX -%s: inte läst: varken du eller root är ägareX -%s: inte läst: du är inte ägareX -%s: inte läst: skrivbar av annan än ägarenX -Ingen nästa rad att sätta ihop medX -Det finns inget i inmatningsmappningenX -Det finns inget i kommandomappningenX -%s tecknet kan inte mappas omX -"%s" är inte ommappat just nuX -Namn på markeringar måste vara ett tecken långaX -%s finns, inget sparat; använd ! för att sparaX -Ny exrc fil: %sX -Målraden ligger inne i området som ska flyttasX -Open kommandot kräver att open flaggan är sattX -Open kommandot är inte implementerat ännuX -Säkerhetskopiering av filen är inte möjligtX -Filen säkerhetskopieradX -%s expanderade till för många filnamnX -Endast vanliga filer och namngivna rör kan läsasX -%s: läslåset är otillgängligtX -Läser...X -%s: %lu rader, %lu teckenX -Inga bakgrundsfönster att visaX -Script kommandot finns bara i "vi" lägeX -Inget kommando att exekveraX -shiftwidth flaggan satt till 0X -Talet har för stort värdeX -Talet har för litet värdeX -Reguljärt uttryck är givet; r flaggan är meningslösX -#, l och p flaggorna kan inte kombineras med c flaggan i "vi" lägeX -Ingen matchande text funnenX -Inget tidigare märke har givitsX -Det är färre än %s märken i stacken; använd :display t[ags]X -Det finns ingen fil %s i märkesstacken; använd :display t[ags]X -Tryck Enter för att fortsätta: X -%s: märke inte funnetX -%s: korrupt märke i %sX -%s: märkets radnummer är bortom filslutetX -Märkesstacken är tomX -%s: söksträngen inte funnenX -%d filer till att editeraX -Buffert %s är tomX -Bekräfta ändring? [n]X -AvbrutenX -Ingen tidigare buffert att exekveraX -Inget tidigare reguljärt uttryckX -%s kommandot kräver att en fil redan lästs inX -Användning: %sX -Visual kommandot kräver att open flaggan är sattX - -Tom filX -Ingen tidigare F, f, T eller t sökningX -%s inte funnenX -Ingen tidigare fil att editeraX -Markören är inte i ett talX -Det resulterande talet är för stortX -Det resulterande talet är för litetX -Inget matchande tecken på denna radX -Matchande tecken inte funnetX -Det finns inga tecken att ersättaX -Det finns inget fönster att byta tillX -Tecken efter söksträng, radoffset och/eller z kommandotX -Ingen tidigare söksträngX -Sökningen slog runt till ursprungliga positionenX -Förkortning överskred expanderingsgränsen: tecken har tagits bortX -Ogiltigt tecken; använd "quote" för att sätta inX -Redan i början på insättningenX -Inga fler tecken att ta bortX -Försök att gå bortom slutet på filenX -Försök att gå bortom slutet på radenX -Ingen förflyttning gjordX -Redan i början på filenX -Försök att gå före början på filenX -Redan i första kolumnenX -Buffertar måste anges före kommandotX -Redan i slutet av filenX -Redan på slutet av radenX -%s är inte ett "vi" kommandoX -Användning: %sX -Inga tecken att ta bortX -Q kommandot kräver "ex" i terminallägeX -Inget kommando att repeteraX -Filen är tomX -%s kan inte användas som ett förflyttningskommandoX -Redan i kommando lägeX -Markören är inte i ett ordX - -Windows flaggans värde är för stor, största värde är %uX -Lägg tillX -ÄndraX -KommandoX -Sätt inX -ErsättX -Förflyttning bortom fönsterslutX -Förflyttning till före fönstrets börjanX -Fönstret måste vara större än %d rader för delningX -Det finns inga fönster i bakgrundenX -Det finns inget fönster i bakgrunden som editerar filen %sX -Du får inte sätta ditt enda synliga fönster i bakgrundenX -Fönstret kan bara krympa till %d raderX -Fönstret kan inte krympaX -Fönstret kan inte växaX - -Detta fönster kan inte pausasX -Avbrutet: omdefinierade tangenter ignoreradeX -vi: temporärbuffertar inte frisläpptaX -Denna terminal har ingen %s tangentX -Endast en buffert kan angesX -Talet är större än %luX -AvbrutetX -Kan inte skapa temporär filX -Warning: %s är inte en normal filX -%s är redan låst, detta blir en icke skrivbar sessionX -%s: ta bortX -%s: stängX -%s: ta bortX -%s: ta bortX -Ej skrivbar fil, filen inte sparad; använd ! för att skriva överX -Ej skrivbar fil, filen inte sparadX -%s finns, ej sparad; använd ! för att utföra operationenX -%s finns, filen inte sparadX -Ofullständig fil, filen inte sparad, använd ! för att skriva överX -Ofullständig fil, filen inte sparadX -%s: filen ändrad efter denna kopia togs; använd ! för att utföra operationenX -%s: filen ändrad efter denna kopia togsX -%s: skrivlåset är otillgängligtX -Skriver...X -%s: VARNING: FILEN TRUNKERADX -Redan vid första märket i denna gruppX -%s: ny fil: %lu rader, %lu teckenX -%s: %lu rader, %lu teckenX -%s expanderade till för många filnamnX -%s är inte en normal filX -%s ägs inte av digX -%s är åtkomstbar av andra än ägarenX -Filen har ändrats efter den sparats; spara eller använd !X -Filen har ändrats efter den sparats; spara eller använd :edit!X -Filen har ändrats efter den sparats; spara eller använd !X -Filen är temporär; exit kastar bort ändringarnaX -Ej skrivbar fil, ändringar har inte automatsparatsX -Loggningen startar omX -bekräfta? [ynq]X -Tryck på en tangent för att fortsätta: X -Tryck på en tangent för att fortsätta [: för att ge fler kommandon]: X -Tryck på en tangent för att fortsätta [q för att avsluta]: X -Den formen av %s kräver "ex" i terminallägeX -Går till "ex" inmatningsläge.X -Kommandot misslyckades, ingen fil inläst ännu.X - forts?X -Oväntad teckenhändelseX -Oväntad filslutshändelseX -Sökningen hittade ingentingX -Oväntad avbrottshändelseX -Oväntad avslutningshändelseX -Oväntad omritningshändelseX -Redan vid sista märket i denna gruppX -%s kommandot kräver "ex" i terminallägeX -Den formen av %s är inte tillgänglig när secure edit flaggan är sattX -Oväntad stränghändelseX -Oväntad tidshändelseX -Oväntad skrivhändelseX - -Skalexpansion är inte tillgänglig när secure edit flaggan är sattX -%s kommandot är inte tillgänglig när secure edit flaggan är sattX -set: %s kan inte slås avX -Fönstret för litet.X -tillagdaX -ändradeX -borttagnaX -ihopsattaX -flyttadeX -flyttadeX -inklistradeX -radX -raderX -Vi har inte länkats med en Tcl tolkX -Filen har ändrats efter den sparats.X -Skalexpansion misslyckadesX -Ingen %s edit flagga givenX -Vi har inte länkats med en Perl tolkX -Inga "ex" kommandon att exekveraX -Tryck <CR> för att exekvera kommando, :q för att avslutaX -Gör "cscope help" för hjälpX -Inga cscope kopplingar körsX -%s: okänd söktyp: använd en av %sX -%d: ingen sådan cscope sessionX -set: %s flaggan får aldrig slås påX -set: %s flaggan får aldrig sättas till 0X -%s: tillagt: %lu rader, %lu teckenX -Oväntad storleksändringX -%d filer att editeraX diff --git a/catalog/swedish.base b/catalog/swedish.base index 43bf7765a25e..7143c5a7818e 100644 --- a/catalog/swedish.base +++ b/catalog/swedish.base @@ -29,7 +29,7 @@ 030 "Filen %s är ingen meddelandekatalog" 031 "Kan inte sätta standardvärde för %s flaggan" 032 "Användning: %s" -033 "set: %s är en okänd flagga: "set all" visar alla flaggor" +033 "set: %s är en okänd flagga: \"set all\" visar alla flaggor" 034 "set: [no]%s flaggan kan inte ges ett värde" 035 "set: %s flaggan är inte boleansk" 036 "set: %s flaggan: %s" @@ -43,8 +43,7 @@ 044 "Lisp flaggan är inte implementerad" 045 "meddelanden är inte avslagna: %s" 046 "meddelanden är inte påslagna: %s" -048 "Paragraph flaggan måste ges i teckengrupper om två" -049 "Section flaggan måste ges i teckengrupper om två" +047 "%s flaggan måste ges i teckengrupper om två" 053 "Standardbufferten är tom" 054 "Buffer %s är tom" 055 "Filer med radmatning i namnet kan inte återskapas" @@ -73,7 +72,7 @@ 078 "Söker..." 079 "Inga icke skrivbara tecken funna" 080 "Okänt kommandonamn" -082 "%s: kommandot är inte tillgängligt i "ex" läge" +082 "%s: kommandot är inte tillgängligt i \"ex\" läge" 083 "Talet får inte vara noll" 084 "%s: Ogiltig radspecifikation" 085 "Fel i intern syntaxtabell (%s: %s)" @@ -97,16 +96,16 @@ 103 "Otillåten adress: filen är tom" 104 "%s kommandot tillåter inte en adress som är 0" 105 "Inga förkortningar att visa" -106 "Förkortningar måste sluta med ett "ord" tecken" +106 "Förkortningar måste sluta med ett \"ord\" tecken" 107 "Förkortningar kan inte innehålla mellanslag eller tab" -108 "Förkortningar kan inte blanda "ord"/"icke ord" tecken, utom i slutet" -109 ""%s" är ingen förkortning" +108 "Förkortningar kan inte blanda \"ord\"/\"icke ord\" tecken, utom i slutet" +109 "\"%s\" är ingen förkortning" 110 "Vi kommando misslyckades: omdefinierade tangenter ignorerade" 111 "Inga fler filer att editera" 112 "Inga tidigare filer att editera" 113 "Inga tidigare filer att spela tillbaka" 114 "Ingen fillista att visa" -115 "Inget tidigare kommando att ersätta "!" med" +115 "Inget tidigare kommando att ersätta \"!\" med" 116 "Inget filnamn att ersätta %% med" 117 "Inget filnamn att ersätta # med" 118 "Fel: execl: %s" @@ -114,8 +113,8 @@ 120 "Filen ändrad efter sista skrivning; spara eller använd !" 121 "Kan inte hitta hemkatalog" 122 "Ny nuvarande katalog: %s" -123 "Inga "cut buffers" att visa" -124 "%s kommandot kan inte används som del i ett "global" eller v kommando" +123 "Inga \"cut buffers\" att visa" +124 "%s kommandot kan inte används som del i ett \"global\" eller v kommando" 125 "%s/%s: inte läst: varken du eller root är ägare" 126 "%s/%s: inte läst: du är inte ägare" 127 "%s/%s: inte läst: skrivbar av annan än ägaren" @@ -126,7 +125,7 @@ 132 "Det finns inget i inmatningsmappningen" 133 "Det finns inget i kommandomappningen" 134 "%s tecknet kan inte mappas om" -135 ""%s" är inte ommappat just nu" +135 "\"%s\" är inte ommappat just nu" 136 "Namn på markeringar måste vara ett tecken långa" 137 "%s finns, inget sparat; använd ! för att spara" 138 "Ny exrc fil: %s" @@ -141,13 +140,13 @@ 147 "Läser..." 148 "%s: %lu rader, %lu tecken" 149 "Inga bakgrundsfönster att visa" -150 "Script kommandot finns bara i "vi" läge" +150 "Script kommandot finns bara i \"vi\" läge" 151 "Inget kommando att exekvera" 152 "shiftwidth flaggan satt till 0" 153 "Talet har för stort värde" 154 "Talet har för litet värde" 155 "Reguljärt uttryck är givet; r flaggan är meningslös" -156 "#, l och p flaggorna kan inte kombineras med c flaggan i "vi" läge" +156 "#, l och p flaggorna kan inte kombineras med c flaggan i \"vi\" läge" 157 "Ingen matchande text funnen" 158 "Inget tidigare märke har givits" 159 "Det är färre än %s märken i stacken; använd :display t[ags]" @@ -182,7 +181,7 @@ 189 "Ingen tidigare söksträng" 190 "Sökningen slog runt till ursprungliga positionen" 191 "Förkortning överskred expanderingsgränsen: tecken har tagits bort" -192 "Ogiltigt tecken; använd "quote" för att sätta in" +192 "Ogiltigt tecken; använd \"quote\" för att sätta in" 193 "Redan i början på insättningen" 194 "Inga fler tecken att ta bort" 195 "Försök att gå bortom slutet på filen" @@ -194,10 +193,10 @@ 201 "Buffertar måste anges före kommandot" 202 "Redan i slutet av filen" 203 "Redan på slutet av raden" -204 "%s är inte ett "vi" kommando" +204 "%s är inte ett \"vi\" kommando" 205 "Användning: %s" 206 "Inga tecken att ta bort" -207 "Q kommandot kräver "ex" i terminalläge" +207 "Q kommandot kräver \"ex\" i terminalläge" 208 "Inget kommando att repetera" 209 "Filen är tom" 210 "%s kan inte användas som ett förflyttningskommando" @@ -260,8 +259,8 @@ 269 "Tryck på en tangent för att fortsätta: " 270 "Tryck på en tangent för att fortsätta [: för att ge fler kommandon]: " 271 "Tryck på en tangent för att fortsätta [q för att avsluta]: " -272 "Den formen av %s kräver "ex" i terminalläge" -273 "Går till "ex" inmatningsläge." +272 "Den formen av %s kräver \"ex\" i terminalläge" +273 "Går till \"ex\" inmatningsläge." 274 "Kommandot misslyckades, ingen fil inläst ännu." 275 " forts?" 276 "Oväntad teckenhändelse" @@ -271,7 +270,7 @@ 280 "Oväntad avslutningshändelse" 281 "Oväntad omritningshändelse" 282 "Redan vid sista märket i denna grupp" -283 "%s kommandot kräver "ex" i terminalläge" +283 "%s kommandot kräver \"ex\" i terminalläge" 284 "Den formen av %s är inte tillgänglig när secure edit flaggan är satt" 285 "Oväntad stränghändelse" 286 "Oväntad tidshändelse" @@ -294,9 +293,9 @@ 304 "Skalexpansion misslyckades" 305 "Ingen %s edit flagga given" 306 "Vi har inte länkats med en Perl tolk" -307 "Inga "ex" kommandon att exekvera" +307 "Inga \"ex\" kommandon att exekvera" 308 "Tryck <CR> för att exekvera kommando, :q för att avsluta" -309 "Gör "cscope help" för hjälp" +309 "Gör \"cscope help\" för hjälp" 310 "Inga cscope kopplingar körs" 311 "%s: okänd söktyp: använd en av %s" 312 "%d: ingen sådan cscope session" diff --git a/catalog/swedish.check b/catalog/swedish.check deleted file mode 100644 index c70b9bbd4095..000000000000 --- a/catalog/swedish.check +++ /dev/null @@ -1,34 +0,0 @@ -Unused message id's (this is okay): -001 -047 -050 -051 -052 -081 -176 -213 -229 -288 -========================= -MISSING ERROR MESSAGES (Please add!): -========================= -Extra error messages (just delete them): -========================= -MESSAGES WITH THE SAME MESSAGE ID's (FIX!): -========================= -Duplicate messages, both id and message (this is okay): -========================= -Duplicate messages, just message (this is okay): - 2 %s expanderade till för många filnamnX - 2 %s: %lu rader, %lu teckenX - 2 %s: Återskapningsfilen är korruptX - 2 Filen har ändrats efter den sparats; spara eller använd !X - 2 Ingen tidigare söksträngX - 2 Kopierar filen för återskapning...X - 2 Loggning utförs inte, ångra är inte möjligtX - 2 flyttadeX - 2 set: %s flaggan är inte boleanskX - 2 Ändringar kan inte återskapas om programmet krascharX - 3 %s: ta bortX - 4 Användning: %sX -========================= diff --git a/catalog/uk_UA.KOI8-U.base b/catalog/uk_UA.KOI8-U.base new file mode 100644 index 000000000000..b2dfc7f52365 --- /dev/null +++ b/catalog/uk_UA.KOI8-U.base @@ -0,0 +1,306 @@ +002 "ðÅÒÅÐÏ×ÎÅÎÎÑ ÚÎÁÞÅÎÎÑ ÄÏ×ÖÉÎÉ ÒÑÄËÕ" +003 "ÎÅÍÏÖÌÉ×Ï ÓÔÅÒÔÉ ÒÑÄÏË %lu" +004 "ÎÅÍÏÖÌÉ×Ï ÄÏÄÁÔÉ ÄÏ ÒÑÄËÕ %lu" +005 "ÎÅÍÏÖÌÉ×Ï ×ÓÔÁ×ÉÔÉ × ÒÑÄÏË %lu" +006 "ÎÅÍÏÖÌÉ×Ï ÒÏÚͦÓÔÉÔÉ ÒÑÄÏË %lu" +007 "ÎÅÍÏÖÌÉ×Ï Ä¦ÓÔÁÔÉ ÏÓÔÁÎÎ¦Ê ÒÑÄÏË" +008 "ðÏÍÉÌËÁ: ÎÅÍÏÖÌÉ×Ï ÏÔÒÉÍÁÔÉ ÒÑÄÏË %lu" +009 "æÁÊÌ ÚÁÐÉÓ¦×" +010 "úÁÐÉÓÉ ÎÅ ×ÅÌÉÓÑ, ÎÅÍÏÖÌÉ×Ï ×¦ÄͦÎÉÔÉ ÏÓÔÁÎÎÀ ËÏÍÁÎÄÕ" +011 "îÅÍÁ ÞÏÇÏ ×¦ÄͦÎÑÔÉ" +012 "úÁÐÉÓÉ ÎÅ ×ÅÌÉÓÑ, ÎÅÍÏÖÌÉ×Ï ×¦ÄͦÎÉÔÉ ÏÓÔÁÎÎÀ ËÏÍÁÎÄÕ" +013 "úÁÐÉÓÉ ÎÅ ×ÅÌÉÓÑ, ÎÅÍÏÖÌÉ×Ï ÐÒÏÄÉ×ÉÔÉÓÑ ×ÐÅÒÅÄ" +014 "îÅÍÁ ÞÏÇÏ ÐÏ×ÔÏÒÀ×ÁÔÉ" +015 "%s/%d: ÐÏÍÉÌËÁ ÚÁÐÉÓÕ ÐÒÏÔÏËÏÌÕ" +016 "óÔÁÎÄÁÒÔÎÉÍ ××ÅÄÅÎÎÑÍ/×É×ÅÄÅÎÎÑÍ ÄÌÑ vi ÍÁ¤ ÂÕÔÉ ÔÅÒͦÎÁÌ" +017 "í¦ÔËÁ %s: ÎÅ ×ÓÔÁÎÏ×ÌÅÎÏ" +018 "í¦ÔËÁ %s: ÒÑÄÏË ÓÔÅÒÔÏ" +019 "í¦ÔËÁ %s: ÐÏÚÉæ§ ËÕÒÓÏÒÕ Â¦ÌØÛÅ ÎÅ ¦ÓÎÕ¤" +020 "ðÏÍÉÌËÁ: " +021 "îÏ×ÉÊ ÆÁÊÌ" +022 "IÍ'Ñ ÚͦÎÉÌÏÓØ" +023 "ÚͦÎÅÎÉÊ" +024 "ÎÅ ÚͦÎÅÎÉÊ" +025 "òO3âìOëO÷áîO" +026 "Ô¦ÌØËÉ ÄÌÑ ÞÉÔÁÎÎÑ" +027 "ÒÑÄÏË %lu Ú %lu [%ld%%]" +028 "ÐÕÓÔÉÊ ÆÁÊÌ" +029 "ÒÑÄÏË %lu" +030 "æÁÊÌ %s ÎÅ ¤ ÆÁÊÌÏÍ ÐÏצÄÏÍÌÅÎÎØ" +031 "îÅÍÏÖÌÉ×Ï ×ÓÔÁÎÏ×ÉÔÉ ÏÐæÀ %s ÚÁ ÚÍÏ×ÞÁÎÎÑÍ" +032 "÷ÉËÏÒÉÓÔÁÎÎÑ: %s" +033 "ïÐæ§ %s ÎÅÍÁ¤: 'set all' ÐÏËÁÚÕ¤ ×Ó¦ ÍÏÖÌÉצ ÏÐæ§" +034 "set: [no]%s ÎÅ ÎÁÂÕ×Á¤ ÔÁËÏÇÏ ÚÎÁÞÅÎÎÑ" +035 "set: %s ÏÐÃ¦Ñ ÎÅ ¤ ÌÏǦÞÎÏÀ" +036 "set: ÏÐÃ¦Ñ %s: %s" +037 "set: ÏÐÃ¦Ñ %s: %s: ÐÅÒÅÐÏ×ÎÅÎÎÑ" +038 "set: ÎÅÐÒÁ×ÉÌØÎÅ ÚÎÁÞÅÎÎÑ %s" +039 "set: %s ÏÐÃ¦Ñ ÎÅ ¤ ÌÏǦÞÎÏÀ" +040 "ë¦ÌØ˦ÓÔØ ËÏÌÏÎÏË ÎÁ ÜËÒÁΦ ÎÁÄÔÏ ÍÁÌÁ, ÍÅÎÛÅ Î¦Ö %d" +041 "ë¦ÌØ˦ÓÔØ ËÏÌÏÎÏË ÎÁ ÜËÒÁΦ ÎÁÄÔÏ ×ÅÌÉËÁ, ¦ÌØÛÅ Î¦Ö %d" +042 "ë¦ÌØ˦ÓÔØ ÒÑÄË¦× ÎÁ ÜËÒÁΦ ÎÁÄÔÏ ÍÁÌÁ, ÍÅÎÛÅ Î¦Ö %d" +043 "ë¦ÌØ˦ÓÔØ ÒÑÄË¦× ÎÁ ÜËÒÁΦ ÎÁÄÔÏ ×ÅÌÉËÁ, ¦ÌØÛÅ Î¦Ö %d" +044 "ïÐÃ¦Ñ lisp צÄÓÕÔÎÑ" +045 "ðÏצÄÏÍÌÅÎÎÑ ÎÅ ×ÉÍËÎÅΦ: %s" +046 "ðÏצÄÏÍÌÅÎÎÑ ÎÅ ×צÍËÎÅΦ: %s" +047 "ïÐÃ¦Ñ %s ÐÏ×ÉÎÎÁ ͦÓÔÉÔÉ ÇÒÕÐÉ Ú Ä×ÏÈ ÓÉÍ×Ï̦×" +053 "óÔÁÒÔÏ×ÉÊ ÂÕÆÅÒ ÐÏÒÏÖΦÊ" +054 "âÕÆÅÒ %s ÐÏÒÏÖΦÊ" +055 "îÅÍÏÖÌÉ×Ï ×¦ÄÎÏ×ÉÔÉ ÆÁÊÌ, ÝÏ Í¦ÓÔÉÔØ × ¦ÍÅΦ ÓÉÍ×ÏÌÉ ÐÅÒÅ×ÅÄÅÎÎÑ ËÁÒÅÔËÉ" +056 "úͦÎÉ ÎÅ ÍÏÖÎÁ ÂÕÄŠצÄÎÏ×ÉÔÉ Ð¦ÓÌÑ ËÒÁÈÕ ÓÅÓ¦§" +057 "ëÏЦÀ×ÁÎÎÑ ÆÁÊÌÕ ÄÌÑ ×¦ÄÎÏ×ÌÅÎÎÑ..." +058 "úÂÅÒÅÖÅÎÎÑ ÎÅ ×ÄÁÌÏÓØ: %s" +059 "úͦÎÉ ÎÅ ÍÏÖÎÁ ÂÕÄŠצÄÎÏ×ÉÔÉ Ð¦ÓÌÑ ËÒÁÈÕ ÓÅÓ¦§" +060 "úÂÅÒÅÖÅÎÎÑ ËÏЦ§ ÆÁÊÌÕ ÎÅ ×ÄÁÌÏÓØ: %s" +061 "ëÏЦÀ×ÁÎÎÑ ÆÁÊÌÕ ÄÌÑ ×¦ÄÎÏ×ÌÅÎÎÑ..." +062 "IÎÆÏÒÍÁæÀ ÐÒÏ ËÏÒÉÓÔÕ×ÁÞÁ %u ÎÅ ÚÎÁÊÄÅÎÏ" +063 "úÁÂÌÏËÕ×ÁÔÉ ×¦ÄÎÏ×ÌÅÎÎÉÊ ÆÁÊÌ ÎÅÍÏÖÌÉ×Ï" +064 "âÕÆÅÒ ×¦ÄÎÏ×ÌÅÎÏÇÏ ÆÁÊÌÕ ÐÅÒÅÐÏ×ÎÅÎÏ" +065 "÷¦ÄÎÏ×ÌÅÎÎÉÊ ÆÁÊÌ" +066 "%s: ÆÁÊÌ ×¦ÄÎÏ×ÌÅÎÎÉÊ ÎÅ ÄÏ Ë¦ÎÃÑ" +067 "%s: ÆÁÊÌ ×¦ÄÎÏ×ÌÅÎÎÉÊ ÎÅ ÄÏ Ë¦ÎÃÑ" +068 "îÅ ¦ÓÎÕÀ¤ ÆÁÊÌ¦× Ú ¦ÍÅÎÅÍ %s, Ñ˦ ÷É ÍÏÖÅÔÅ ÐÒÏÞÉÔÁÔÉ" +069 "IÓÎÕÀÔØ ÓÔÁÒ¦ ×ÅÒÓ¦§ ÆÁÊÌÕ, Ñ˦ ÍÏÖÎÁ צÄÎÏ×ÉÔÉ" +070 "IÓÎÕÀÔØ ¦ÎÛ¦ ÆÁÊÌÉ, Ñ˦ ÍÏÖÎÁ צÄÎÏ×ÉÔÉ" +071 "e-mail ΊצĦÓÌÁÎÏ: %s" +072 "æÁÊÌ ÐÕÓÔÉÊ - ÎÅÍÁ ÞÏÇÏ ÛÕËÁÔÉ" +073 "äÏÓÑÎÕÔÏ Ë¦ÎÃÑ ÆÁÊÌÕ ÂÅÚ ÚÎÁÈÏÖÄÅÎÎÑ ÚÒÁÚËÕ ÐÏÛÕËÕ" +074 "îÅ ÚÁÄÁÎÏ ÚÒÁÚÏË ÐÏÛÕËÕ" +075 "úÒÁÚÏË ÐÏÛÕËÕ ÎÅ ÚÎÁÊÄÅÎÏ" +076 "äÏÓÑÎÕÔÏ ÐÏÞÁÔËÕ ÆÁÊÌÕ ÂÅÚ ÚÎÁÈÏÖÄÅÎÎÑ ÚÒÁÚËÕ ÐÏÛÕËÕ" +077 "ðÏÛÕË ÚÁÃÉËÌÅÎÏ" +078 "ðÏÛÕË..." +079 "îÅÐÅÞÁÔÎÉÈ ÓÉÍ×ÏÌ¦× ÎÅ ÚÎÁÊÄÅÎÏ" +080 "îÅצÄÏÍÁ ËÏÍÁÎÄÁ" +082 "%s: ËÏÍÁÎÄÁ ÎÅ ÄÏÓÔÕÐÎÁ × ÒÅÖÉͦ ex" +083 "ì¦ÞÉÌØÎÉË ÎÅ ÍÏÖÅ ÂÕÔÉ ÎÕÌÅÍ" +084 "%s: ÎÅÐÒÁ×ÉÌØÎÅ ×ÉÚÎÁÞÅÎÎÑ ÒÑÄËÕ" +085 "÷ÎÕÔÒ¦ÛÎÑ ÐÏÍÉÌËÁ × ÓÉÎÔÁËÓÉÓ¦ (%s: %s)" +086 "÷ÉËÏÒÉÓÔÁÎÎÑ: %s" +087 "%s: ÔÉÍÞÁÓÏ×ÉÊ ÂÕÆÅÒ ÎÅ ×ÉËÏÒÉÓÔÁÎÏ" +088 "í¦ÔËÕ ÐÏÓÔÁ×ÌÅÎÏ ÐÅÒÅÄ ÐÅÒÛÉÍ ÒÑÄËÏÍ" +089 "í¦ÔËÕ ÐÏÓÔÁ×ÌÅÎÏ Ð¦ÓÌÑ Ë¦ÎÃÑ ÆÁÊÌÕ" +090 "@ Ú Ä¦ÁÐÁÚÏÎÏÍ ÐÒÁÃÀ¤ ËÏÌÉ ÚͦÎÅÎÏ ÆÁÊÌ/צËÎÏ" +091 "ëÏÍÁÎÄÁ Global/v ÐÒÁÃÀ¤ ËÏÌÉ ÚͦÎÅÎÏ ÆÁÊÌ/צËÎÏ" +092 "ëÏÍÁÎÄÁ ex ÎÅ ×ÄÁÌÁÓØ: ÎÁÓÔÕÐΦ ËÏÍÁÎÄÉ Ú'¦ÇÎÏÒÏ×ÁÎÏ" +093 "ëÏÍÁÎÄÁ ex ÎÅ ×ÄÁÌÁÓØ: צÄÏÂÒÁÖÅΦ ËÌÁצۦ Ú'¦ÇÎÏÒÏ×ÁÎÏ" +094 "äÒÕÇÁ ÁÄÒÅÓÁ ÍÅÎÛÅ Î¦Ö ÐÅÒÛÁ" +095 "îÅ ×ËÁÚÁÎÏ ¦Í'Ñ Í¦ÔËÉ" +096 "\\ ÎÅ ÚÁ˦ÎÞÕ¤ÔØÓÑ / ÞÉ ?" +097 "ðÏÓÉÌÁÎÎÑ ÎÁ ÒÑÄÏË Ú ÎÏÍÅÒÏÍ, ÍÅÎÛÉÍ Î¦Ö 0" +098 "ëÏÍÁÎÄÁ %s ÎÅצÄÏÍÁ" +099 "ðÅÒÅÐÏ×ÎÅÎÎÑ Ì¦ÞÉÌØÎÉËÁ ÁÄÒÅÓ" +100 "îÅÄÏÂ¦Ò Ì¦ÞÉÌØÎÉËÁ ÁÄÒÅÓ" +101 "îÅÄÏÐÕÓÔÉÍÁ ËÏͦÎÁÃ¦Ñ × ÁÄÒÅÓ¦" +102 "îÅÐÒÁ×ÉÌØÎÁ ÁÄÒÅÓÁ: ×ÓØÏÇÏ %lu ÒÑÄË¦× Õ ÆÁÊ̦" +103 "îÅÐÒÁ×ÉÌØÎÁ ÁÄÒÅÓÁ: ÆÁÊÌ ÐÕÓÔÉÊ" +104 "ëÏÍÁÎÄÁ %s ÎÅ ÍÏÖÅ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÁÄÒÅÓÕ 0" +105 "îÅÍÁ¤ ÁÂÒÅצÁÔÕÒ" +106 "áÂÒÅצÁÔÕÒÉ ÐÏ×ÉÎΦ ÚÁ˦ÎÞÕ×ÁÔÉÓÑ ÓÉÍ×ÏÌÏÍ \"Ó̦×\"" +107 "÷ ÁÂÒÅצÁÔÕÒ¦ ÎÅ ÍÏÖÎÁ ×ÉËÏÒÉÓÔÏ×Õ×ÁÔÉ ÓÉÍ×ÏÌÉ ÔÁÂÕÌÑæ§ ÔÁ ÐÒϦÌÉ" +108 "áÂÒÅצÁÔÕÒÉ ÎÅ ÍÏÖÕÔØ ÚͦÛÕ×ÁÔÉ ÓÉÍ×ÏÌÉ Ó̦×/ÎÅ-Ó̦×, ȦÂÁ ÝÏ × Ë¦Îæ ÒÑÄËÕ" +109 "\"%s\" ÎÅ ÁÂÒÅצÁÔÕÒÁ" +110 "ëÏÍÁÎÄÁ Vi ÎÅ ×ÄÁÌÁÓØ: צÄÏÂÒÁÖÅΦ ËÌÁצۦ Ú'¦ÇÎÏÒÏ×ÁÎÏ" +111 "æÁÊÌ¦× ÄÌÑ ÒÅÄÁÇÕ×ÁÎÎÑ Â¦ÌØÛÅ ÎÅÍÁ¤" +112 "ðÏÐÅÒÅÄÎØÏÇÏ ÆÁÊÌÕ ÄÌÑ ÒÅÄÁÇÕ×ÁÎÎÑ ÎÅÍÁ¤" +113 "ðÏÐÅÒÅÄÎØÏÇÏ ÆÁÊÌÕ ÄÌÑ ÐÅÒÅÇÌÑÄÕ ÎÅÍÁ¤" +114 "îÅÍÁ¤ ÆÁÊ̦×" +115 "îÅÍÁ¤ ÐÏÐÅÒÅÄÎØϧ ËÏÍÁÎÄÉ ÄÌÑ ÚÁͦÎÉ \"!\"" +116 "÷¦ÄÓÕÔΤ ¦Í'Ñ ÆÁÊÌÕ ÄÌÑ Ð¦ÄͦÎÉ %%" +117 "÷¦ÄÓÕÔΤ ¦Í'Ñ ÆÁÊÌÕ ÄÌÑ Ð¦ÄͦÎÉ #" +118 "ðÏÍÉÌËÁ: execl: %s" +119 "ðÏÍÉÌËÁ ××ÅÄÅÎÎÑ/×É×ÅÄÅÎÎÑ: %s" +120 "æÁÊÌ ÍÏÄÉƦËÏ×ÁÎÏ Ð¦ÓÌÑ ÏÓÔÁÎÎØϧ ËÏÍÁÎÄÉ ÐÏ×ÎÏÇÏ ÚÁÐÉÓÕ: ÚÂÅÒÅÖ¦ÔØ ÞÉ ×ÉËÏÒÉÓÔÁÊÔÅ ! ÄÌÑ ÏÂÈÏÄÕ" +121 "îÅÍÏÖÌÉ×Ï ÚÎÁÊÔÉ ÄÏÍÁÛÎ¦Ê ËÁÔÁÌÏÇ" +122 "îÏ×ÉÊ ËÁÔÁÌÏÇ: %s" +123 "îÅÍÁ¤ ÎÁÐÏ×ÎÅÎÉÈ ÂÕÆÅÒ¦×" +124 "ëÏÍÁÎÄÁ %s ÎÅ ×ÉËÏÒÉÓÔÏ×Õ¤ÔØÓÑ ÑË ÞÁÓÔÉÎÁ ËÏÍÁÎÄÉ global ÞÉ v" +125 "%s/%s: ΊצÄËÒÉÔÏ: ÎÅ ÎÁÌÅÖÉÔØ ÷ÁÍ ÞÉ ÁÄͦΦÓÔÒÁÔÏÒÕ" +126 "%s/%s: ΊצÄËÒÉÔÏ: ÎÅ ÎÁÌÅÖÉÔØ ÷ÁÍ" +127 "%s/%s: ΊצÄËÒÉÔÏ: ÍÏÖÌÉצÓÔØ ÚÁÐÉÓÕ ËÏÒÉÓÔÕ×ÁÞÅÍ, ÑËÉÊ ÎÅ ¤ ×ÌÁÓÎÉËÏÍ" +128 "%s: ΊצÄËÒÉÔÏ: ÎÅ ÎÁÌÅÖÉÔØ ÷ÁÍ ÞÉ ÁÄͦΦÓÔÒÁÔÏÒÕ" +129 "%s: ΊצÄËÒÉÔÏ: ÎÅ ÎÁÌÅÖÉÔØ ÷ÁÍ" +130 "%s: ΊצÄËÒÉÔÏ: ÍÏÖÌÉצÓÔØ ÚÁÐÉÓÕ ËÏÒÉÓÔÕ×ÁÞÅÍ, ÑËÉÊ ÎÅ ¤ ×ÌÁÓÎÉËÏÍ" +131 "îÅÍÁ¤ ¦ÌØÛÅ ÒÑÄË¦× ÄÌÑ ÏÂ'¤ÄÎÁÎÎÑ" +132 "îÅÍÁ¤ ÐÁÒÁÍÅÔÒ¦× ××ÅÄÅÎÎÑ" +133 "îÅÍÁ¤ ÐÁÒÁÍÅÔÒ¦× ËÏÍÁÎÄÉ" +134 "óÉÍ×ÏÌ %s ÎÅ ÍÏÖÎÁ ÐÅÒÅÎÁÚÎÁÞÉÔÉ" +135 "\"%s\" ÚÁÒÁÚ ÎÅ ÐÅÒÅÎÁÚÎÁÞÅÎÏ" +136 "IÍ'Ñ Í¦ÔËÉ -- ÏÄÉÎ ÓÉÍ×ÏÌ" +137 "%s ¦ÓÎÕ¤, ÎÅ ÚÁÐÉÓÁÎÏ; ×ÉËÏÒÉÓÔÁÊÔÅ ! ÄÌÑ ÏÂÈÏÄÕ" +138 "îÏ×ÉÊ ÆÁÊÌ exrÓ: %s" +139 "òÑÄÏË ÐÒÉÚÎÁÞÅÎÎÑ ÚÁÚÎÁÞÅÎÏ ×ÓÅÒÅÄÉΦ ĦÁÐÁÚÏÎÕ ÐÅÒÅͦÝÅÎÎÑ" +140 "ëÏÍÁÎÄÁ open ×ÉÍÁÇÁ¤ ×ÓÔÁÎÏ×ÌÅÎÎÑ ÏÐæ§ open" +141 "ëÏÍÁÎÄÕ open ÝÅ ÎÅ ÒÅÁ̦ÚÏ×ÁÎÏ" +142 "úÁÈÉÓÔ ÆÁÊÌÕ ÎÅÍÏÖÌÉ×ÉÊ" +143 "æÁÊÌ ÚÁÈÉÝÅÎÏ" +144 "%s ÒÏÚÛÉÒÉ×ÓÑ × ÎÁÄÔÏ ×ÅÌÉËÕ Ë¦ÌØ˦ÓÔØ ¦ÍÅÎ ÆÁÊ̦×" +145 "ðÒÏÞÉÔÁÔÉ ÍÏÖÎÁ Ô¦ÌØËÉ ÐÒÏÓÔÉÊ ÆÁÊÌ ÞÉ ¦ÍÅÎÏ×ÁÎÉÊ ËÁÎÁÌ(pipe)" +146 "%s: ÂÌÏËÕ×ÁÎÎÑ ×¦Ä ÞÉÔÁÎÎÑ ÎÅÍÏÖÌÉ×Å" +147 "úÞÉÔÕÀ..." +148 "%s: %lu ÒÑÄ˦×, %lu ÓÉÍ×Ï̦×" +149 "îÅÍÁ¤ Ô¦ÎØÏ×ÉÈ ×¦ËÏÎ" +150 "ëÏÍÁÎÄÁ script ÄÏÓÔÕÐÎÁ ÌÉÛÅ × ÒÅÖÉͦ vi" +151 "îÅÍÁ ËÏÍÁÎÄÉ ÄÌÑ ×ÉËÏÎÁÎÎÑ" +152 "ïÐæÀ shiftwidth ×ÓÔÁÎÏ×ÌÅÎÏ × 0" +153 "ðÅÒÅÐÏ×ÎÅÎÎÑ Ì¦ÞÉÌØÎÉËÁ" +154 "ãÉËÌ ×ÉËÏÎÁÎÏ ÎÅ ÄÏ Ë¦ÎÃÑ" +155 "÷ËÁÚÁÎÏ ÒÅÇÕÌÑÒÎÉÊ ×ÉÒÁÚ; ÐÁÒÁÍÅÔÒ 'r' ÎÅ ÍÁ¤ ÓÅÎÓÕ" +156 "ðÁÒÁÍÅÔÒÉ #, l ÔÁ p ÎÅ ÍÏÖÎÁ ËÏͦÎÕ×ÁÔÉ Ú ÐÁÒÁÍÅÔÒÏÍ 'c' × ÒÅÖÉͦ vi" +157 "óЦ×ÐÁÄÁÎØ ÎÅÍÁ¤" +158 "TÅÇ ×¦ÄÓÕÔΦÊ" +159 "íÅÎÛÅ Î¦Ö %s ÚÁÐÉÓ¦× Õ ÓÔÅËÕ ÔÅǦ×; ×ÉËÏÒÉÓÔÁÊÔÅ :display t[ags]" +160 "îÅÍÁ¤ ÆÁÊÌÕ %s × ÓÔÅËÕ ÔÅÇ¦× ÄÌÑ ÐÏ×ÅÒÎÅÎÎÑ; ×ÉËÏÒÉÓÔÁÊÔÅ :display t[ags]" +161 "îÁÔÉÓΦÔØ ENTER ÄÌÑ ÐÒÏÄÏ×ÖÅÎÎÑ: " +162 "%s: ÔÅÇ ÎÅ ÚÎÁÊÄÅÎÏ" +163 "%s: Ú¦ÐÓÏ×ÁÎÉÊ ÔÅÇ × %s" +164 "%s: ÎÏÍÅÒ ÒÑÄËÕ ÔÅÇÁ ÚÎÁÈÏÄÉÔØÓÑ ÚÁ ˦ÎÃÅÍ ÆÁÊÌÕ" +165 "óÔÅË ÔÅÇ¦× ÐÏÒÏÖΦÊ" +166 "%s: ÚÒÁÚÏË ÐÏÛÕËÕ ÎÅ ÚÎÁÊÄÅÎÏ" +167 "úÁÌÉÛÉÌÏÓØ %d ÆÁÊÌ¦× ÄÌÑ ÒÅÄÁÇÕ×ÁÎÎÑ" +168 "âÕÆÅÒ %s ÐÏÒÏÖΦÊ" +169 "úͦÎÉÔÉ? [n]" +170 "ðÅÒÅÒ×ÁÎÏ" +171 "îÅÍÁ¤ ÂÕÆÅÒÕ ÄÌÑ ×ÉËÏÒÉÓÔÁÎÎÑ" +172 "îÅÍÁ¤ ÐÏÐÅÒÅÄÎØÏÇÏ ÒÅÇÕÌÑÒÎÏÇÏ ×ÉÒÁÚÕ" +173 "ëÏÍÁÎÄÁ %s ×ÉÍÁÇÁ¤ ×ÖÅ ÐÒÏÞÉÔÁÎÉÊ ÆÁÊÌ" +174 "÷ÉËÏÒÉÓÔÁÎÎÑ: %s" +175 "ëÏÍÁÎÄÁ visual ×ÉÍÁÇÁ¤ ×ÓÔÁÎÏ×ÌÅÎÎÑ ÏÐæ§ open" +177 "ðÕÓÔÉÊ ÆÁÊÌ" +178 "îÅÍÁ¤ ÐÏÐÅÒÅÄÎØÏÇÏ ÐÏÛÕËÕ F, f, T, ÞÉ t" +179 "%s ÎÅ ÚÎÁÊÄÅÎÏ" +180 "îÅÍÁ¤ ÐÏÐÅÒÅÄÎØÏÇÏ ÆÁÊÌÕ ÄÌÑ ÒÅÄÁÇÕ×ÁÎÎÑ" +181 "ëÕÒÓÏÒ ÓÔϧÔØ ÎÅ ÎÁ ÃÉÆÒ¦" +182 "OÔÒÉÍÁÎÅ ÞÉÓÌÏ ÎÁÄÔÏ ×ÅÌÉËÅ" +183 "OÔÒÉÍÁÎÅ ÞÉÓÌÏ ÎÁÄÔÏ ÍÁÌÅ" +184 "îÅÍÁ¤ צÄÐÏצÄÎÏÇÏ ÓÉÍ×ÏÌÕ × ÃØÏÍÕ ÒÑÄËÕ" +185 "÷¦ÄÐÏצÄÎÉÊ ÓÉÍ×ÏÌ ÎÅ ÚÎÁÊÄÅÎÏ" +186 "îÅÍÁ¤ ÓÉÍ×ÏÌ¦× ÄÌÑ ÚÁͦÎÉ" +187 "îÅÍÁ¤ ¦ÎÛÏÇÏ ×¦ËÎÁ" +188 "óÉÍ×ÏÌÉ Ð¦ÓÌÑ ÒÑÄËÕ ÄÌÑ ÐÏÛÕËÕ, ÚͦÝÅÎÎÑ ÒÑÄËÕ ÔÁ/ÞÉ ËÏÍÁÎÄÉ z" +189 "îÅÍÁ¤ ÐÏÐÅÒÅÄÎØÏÇÏ ÚÒÁÚËÕ ÐÏÛÕËÕ" +190 "ðÏÛÕË ÚÁ˦ÎÞÉ×ÓÑ ÎÁ ÐÏÞÁÔËÏ×¦Ê ÐÏÚÉæ§" +191 "áÂÒÅצÁÔÕÒÁ ÐÅÒÅ×ÉÝÉÌÁ Ì¦Í¦Ô ÒÏÚÛÉÒÅÎÎÑ: ÓÉÍ×ÏÌÉ Ú'¦ÇÎÏÒÏ×ÁÎÏ" +192 "îÅÄÏÚ×ÏÌÅÎÉÊ ÓÉÍ×ÏÌ: ÚÁÄÁÊÔÅ × ÄÕÖËÁÈ" +193 "÷ÖÅ ÎÁ ÐÏÞÁÔËÕ ×ÓÔÁ×ËÉ" +194 "îÅÍÁ¤ ÓÉÍ×ÏÌ¦× ÄÌÑ ×ÉÄÁÌÅÎÎÑ" +195 "òÕÈ ÚÁ ˦ÎÅÃØ ÆÁÊÌÕ" +196 "òÕÈ ÚÁ ˦ÎÅÃØ ÒÑÄËÕ" +197 "ëÕÒÓÏÒ ÎÅ ÐÅÒÅͦÝÕ×Á×ÓÑ" +198 "÷ÖÅ ÎÁ ÐÏÞÁÔËÕ ÆÁÊÌÕ" +199 "òÕÈ ËÕÒÓÏÒÕ ÚÁ ÐÏÞÁÔÏË ÆÁÊÌÕ" +200 "÷ÖÅ × ÐÅÒÛ¦Ê ËÏÌÏÎæ" +201 "âÕÆÅÒ ÔÒÅÂÁ ×ËÁÚÕ×ÁÔÉ ÐÅÒÅÄ ËÏÍÁÎÄÏÀ" +202 "÷ÖÅ ÎÁ ˦Îæ ÆÁÊÌÕ" +203 "÷ÖÅ ÎÁ ˦Îæ ÒÑÄËÕ" +204 "%s ÎÅ ËÏÍÁÎÄÁ Vi" +205 "÷ÉËÏÒÉÓÔÁÎÎÑ: %s" +206 "îÅÍÁ¤ ÓÉÍ×ÏÌ¦× ÄÌÑ ×ÉÄÁÌÅÎÎÑ" +207 "ëÏÍÁÎÄÁ Q ×ÉÍÁÇÁ¤ ¦ÎÔÅÒÆÅÊÓÕ ex" +208 "îÅÍÁ¤ ËÏÍÁÎÄÉ ÄÌÑ ÐÏ×ÔÏÒÅÎÎÑ" +209 "æÁÊÌ ÐÕÓÔÉÊ" +210 "ëÏÍÁÎÄÕ %s ÎÅ ÍÏÖÎÁ ×ÉËÏÒÉÓÔÁÔÉ ÄÌÑ ÐÅÒÅͦÝÅÎÎÑ" +211 "÷ÖÅ × ËÏÍÁÎÄÎÏÍÕ ÒÅÖÉͦ" +212 "ëÕÒÓÏÒ ÓÔϧÔØ ÎÅ ÎÁ ÓÌÏצ" +214 "úÎÁÞÎÅÎÎÑ ÏÐæ§ Windows ÎÁÄÔÏ ×ÅÌÉËÅ, ÍÁËÓÉÍÕÍ = %u" |